Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
No tested application protocols are provided for this item. The following generic procedures are offered as non-binding guidance; adjust to your system and verify experimentally.
Stock solution preparation (general):
Weigh under low humidity if hygroscopic behavior is suspected. Dissolve in DMSO, methanol, or ethanol to 10–50 mM, if soluble. Filter (0.22 μm PTFE or PES) into amber vials. Record exact concentration by weight and volume; for highest accuracy, confirm by quantitative NMR or UV with an independently established extinction coefficient.
LC–MS reference standard use (general):
Prepare a dilution series (e.g., 0.1–10 μg/mL) in mobile phase. Store working standards at 4 °C for short periods; assess stability by reinjection profiling.
Bioassay dosing (general):
Dilute DMSO stocks into assay buffer/media to a final vehicle content typically ≤0.5–1% v/v, verifying solubility and absence of precipitation. Include vehicle-only controls.
These steps are illustrative and not item-specific. Consult your assay SOPs and the product’s CoA/SDS for definitive instructions.
Biological Roles
Item-specific biological roles are not provided in this listing.
General literature context:
The “Aceroside” nomenclature is associated with metabolites reported from Acer (maple) species. Such compounds are often categorized as plant secondary metabolites, frequently glycosidic in nature, and may participate in plant defense, signaling, or stress responses (literature, non-item-specific).
Phenolic and phenylpropanoid glycosides, as a class, can display antioxidant or radical-scavenging behavior in vitro; however, activity is strongly structure- and context-dependent. Do not assume such properties for Aceroside VII without primary data.
Research implications:
Standards like Aceroside VII can be used to study biosynthetic pathways, chemotaxonomy, and metabolomic fingerprints of Acer species.
In biochemical assays, glycosidic natural products are sometimes explored as substrates or inhibitors for glycosidases and glycosyltransferases; applicability to Aceroside VII should be experimentally validated.
Important note:
No medical or clinical claims are made for this product. Any biological evaluations should be performed under controlled laboratory conditions with appropriate approvals, and results should not be extrapolated to safety or efficacy without rigorous evidence.
Buffer Applications
Aceroside VII is a small organic compound and is not typically used as a buffering agent.
It does not constitute a conventional acid–base buffer system, and no buffer recipes are associated with this item in the Product Data.
For experiments requiring buffered solutions (e.g., in vitro assays), prepare standard buffers (e.g., phosphate, HEPES, acetate) separately and dissolve Aceroside VII into the buffer or a miscible co-solvent as dictated by its verified solubility and stability.
Refer to your assay design for appropriate pH range and ionic strength; validate that the buffer components do not react with or degrade the analyte.
Green Alternatives
Because Aceroside VII is a small-molecule analyte rather than a process solvent, “green alternatives” apply primarily to extraction and analytical workflows rather than to substitution of the compound itself.
Extraction/Workup: Favor water/ethanol or water/acetone mixtures over chlorinated solvents for isolation and sample prep when feasible, balancing recovery with selectivity.
Chromatography: Use ethanol or isopropanol as strong solvents in preparative separations where compatible with stationary phases and analyte stability; consider supercritical CO2 with suitable modifiers for nonpolar fractions.
Waste minimization: Miniaturize analytical runs (UHPLC) and adopt shorter gradients to reduce solvent consumption. Employ solid-phase extraction (SPE) for clean-up to limit bulk solvent use.
Illustrative comparison (general):
EtOAc vs DCM/CHCl3 for partitions: EtOAc offers lower toxicity and environmental impact while often providing adequate distribution for moderately polar species.
MeOH/Water vs ACN/Water in LC: Methanol is typically greener; however, acetonitrile may give superior peak shape for some glycosides—choose empirically.
Trade-offs:
Greener solvents can change selectivity and recovery. Validate extraction efficiency, purity, and stability of Aceroside VII under the chosen conditions. Document carbon footprint and waste streams as part of method selection.
Pharmaceutical Uses
No pharmaceutical or excipient use is specified for this product.
Status: This listing is for research use only and is not accompanied by pharmacopeial status, GMP documentation, or suitability statements for human or veterinary use.
Formulation context (general): When small molecules like Aceroside VII are evaluated in preclinical research, they are commonly prepared as DMSO stocks and diluted into compatible vehicles. Such practices require verification of solubility, stability, and absence of reactive impurities; none of these parameters are specified for this item and should be established in-house if needed.
Manufacturing/CMC: Not applicable for this listing. If you require material for regulated development, contact us regarding custom sourcing with appropriate quality documentation.
Physical Properties
Item-specific physicochemical properties have not been provided in this listing.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point: Not applicable/unknown for likely nonvolatile solids of this class; Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
LogP/logD: Not specified for this item; refer to CoA/Spec Sheet.
pKa: Not specified for this item; refer to CoA/Spec Sheet.
Refractive index: Not applicable to solids; Not specified for this item; refer to CoA/Spec Sheet.
Literature/general guidance (not item-specific):
Many glycosidic natural products tend to be polar and often show solubility in polar protic solvents (e.g., methanol, ethanol) and mixtures with water; aglycone polarity and acylation strongly affect solubility and chromatographic behavior. Verify for Aceroside VII specifically before use.
Practical tips:
Perform a small-scale solubility screen (e.g., H2O, MeOH, EtOH, acetonitrile, DMSO) at room temperature, gentle warming if needed, and sonication. Filter through a 0.22 μm membrane before analytical injections.
For quantitative analytical work, determine extinction coefficients or detector response empirically; do not assume based on related analogs.
Quality and Grades
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet for assay, chromatographic purity, and related impurity profiles.
Interpretation and best practices:
When a grade is not listed, treat the material as a research-grade reference compound intended for discovery workflows, method development, and screening. For quantitative applications (e.g., as a calibration standard), verify purity and water/solvent content via CoA and, if needed, in-house analysis (HPLC/LC–MS, Karl Fischer, NMR).
Stabilizers: Not specified for this item; refer to CoA/Spec Sheet. If none are present, consider protecting from light/moisture and storing frozen as recommended to minimize degradation pathways such as hydrolysis or oxidation.
Batch-specific documentation: Request the lot CoA for chromatographic trace, assay, residual solvents, and recommended handling. If using in regulated workflows, confirm suitability against your internal specifications.
What the absence of a formal grade implies:
HPLC/LC–MS suitability is not guaranteed without verification of UV cutoff/background or ion suppression. Run blanks and system suitability tests before critical injections.
For bioassays, confirm endotoxin/bioburden requirements if relevant to your application; these are not implied by a research-chemical listing.
Reaction and Applications
Manufacturer Applications: Not provided in the Product Data for this item. The following are general research uses for small-molecule natural products in screening libraries; verify suitability for Aceroside VII.
Reference standard and dereplication: Use as a reference in LC–MS-based profiling of plant extracts or natural product fractions, aligning accurate mass, retention time, and fragmentation patterns.
Method development: Optimize chromatographic methods (gradient, stationary phase) for phenolic/glycosidic analytes, including assessment of peak shape under acidic vs neutral mobile phases.
Stability studies: Evaluate hydrolytic and oxidative stability under pH stress, light exposure, and temperature to design robust sample handling protocols.
Bioassay screening: Employ as a test article in enzyme or receptor-based assays relevant to carbohydrate-processing enzymes or phenolic-interacting proteins; ensure solubility and vehicle controls.
Chemical derivatization (general): If hydroxyl-rich, potential for per-acetylation or silylation to aid GC or MS volatility/detection; confirm applicability to Aceroside VII via structural verification.
Practical tips:
Work under low-light, low-oxygen conditions if chromophoric/oxidation-prone motifs are suspected. Include antioxidant additives (e.g., ascorbate, BHT) only after confirming no interference with your assay.
Record lot-specific data (purity, exact mass, storage history) alongside bioactivity results to ensure reproducibility.
Reaction Conditions
No specific reaction conditions are provided for Aceroside VII in this listing. The following are general guidelines for handling and derivatizing polar natural products; confirm suitability experimentally.
Dissolution for reactions: Use dry polar solvents (e.g., anhydrous methanol, DMF, DMSO) under inert atmosphere if moisture-sensitive protecting groups or coupling reagents are employed.
Protection of hydroxyls (general):
Acetylation: Ac2O/pyridine or DMAP-catalyzed acylations at 0–25 °C, minutes to hours; monitor by TLC/HPLC.
Silylation: TMSCl or TBDMSCl with imidazole in DMF at ambient temperature.
Deprotection: Mild basic methanolysis (e.g., NaOMe/MeOH) or fluoride-mediated desilylation (TBAF) as applicable. Avoid strong acids/bases if glycosidic stability is uncertain.
Oxidation/esterification (phenolic OH, general): DCC/DMAP esterifications in DCM or acetonitrile at 0–25 °C; monitor for side reactions. Use greener solvents when possible.
Analytical controls: Track conversions by LC–MS and 1H NMR; confirm absence of glycosidic cleavage.
These are literature-style conditions for broad classes of hydroxylated molecules and are not item-specific for Aceroside VII. Always perform small-scale trials and consult primary references.
Safety and Handling
Hazard classification details are not provided in the Product Data for this item. Always consult the SDS for authoritative safety information prior to use.
GHS/CLP: Not specified for this item; refer to SDS.
Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
General laboratory precautions for small-molecule natural products:
PPE: Use lab coat, safety glasses, and appropriate chemically resistant gloves. Avoid inhalation of dusts and contact with skin/eyes. Handle in a fume hood when weighing or dissolving.
Incompatibilities: Until specific functional groups are confirmed, avoid strong oxidizers and strong acids/bases that could hydrolyze glycosidic linkages or degrade phenolics. Keep away from heat and light to minimize degradation.
First aid (overview; see SDS for details): Rinse eyes/skin with water for several minutes if contacted. If inhaled, move to fresh air. If ingested, rinse mouth and seek medical advice. Provide SDS to physicians.
Environmental precautions: Prevent release to drains. Collect spillage using inert absorbents; dispose according to institutional and regulatory guidelines.
Special risks (general): Glycosides and phenolics can be sensitive to hydrolysis and oxidation. Work under dry, inert conditions when required by your protocol. Use amber containers to limit photodegradation if chromophoric groups are present.
Research Use Note: For research use only.
Solvent Selection
Item-specific solubility is not provided. The guidance below outlines a rational solvent-screening approach for small, polar-to-moderately polar natural products (typical for glycosidic compounds), to be verified experimentally for Aceroside VII.
Polarity class (general expectation): Polar protic or mixed aqueous-organic behavior if glycosidic; confirm empirically for this CAS.
Suggested primary screen: Water, methanol, ethanol, isopropanol, acetonitrile, DMSO. Begin at 1–5 mg/mL, gently warm (≤40 °C) and sonicate. Avoid high pH unless hydrolytic stability is established.
Analytical compatibility: For LC–MS, methanol or acetonitrile with 0.1% formic acid is commonly used; choose based on retention and ionization. For HILIC vs reversed-phase behavior, test both modes as glycosides can retain on either depending on structure.
Avoid: Chlorinated solvents are typically poor choices for highly polar analytes and may not dissolve glycosides effectively.
Small comparison (general):
Water: best for highly polar, ionizable analytes; may require buffering; limited solubility for hydrophobic aglycones.
Methanol/Ethanol: good dissolution and LC compatibility; watch for transesterification in acidic/basic conditions.
DMSO: powerful co-solvent for stock solutions; dilute promptly into assay media to <1–2% v/v to limit biological interference.
Tip: Prepare a concentrated DMSO stock (if soluble) and aliquot frozen to minimize freeze-thaw and moisture uptake.
Storage and Reconstitution
Storage conditions (from Product Data): Store at -20 °C.
Shipping: Shipped in an ice chest with ice pads (from Product Data) to maintain a cold chain during transit.
Container recommendations: Keep tightly closed in a dry, inert atmosphere. Use amber vials if the compound is light-sensitive (common for some natural products; verify for this item).
Stability: Not specified for this item; refer to CoA/Spec Sheet. Avoid repeated freeze–thaw cycles by aliquoting upon receipt.
Reconstitution: Not specified for this item. As a general approach, dissolve the material in a suitable solvent (e.g., DMSO, methanol, ethanol, or buffered aqueous mixtures) based on a small-scale solubility test. Filter if required for analytical use.
Handling tips:
Allow vial to equilibrate to room temperature in a desiccator before opening to limit moisture condensation.
Record the date of first opening and track cumulative time at ambient temperature.
Always refer to the lot-specific CoA and SDS for definitive guidance on stability, solubility, and any special handling precautions.
Structure and Identity
Brief overview: Aceroside VII is listed as a small-molecule natural product entry in our compound library. Item-specific structural identifiers are largely not provided in this listing.
Product name: Aceroside VII (SKU: A463767)
CAS: 104109-45-7 (from Product Data)
PubChem CID: 133554322 (from Product Data)
InChIKey: 214229 (as provided; note that typical InChIKeys are 27-character strings; refer to CoA/SDS for the authoritative identifier)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general literature context):
“Acerosides” are reported in the literature as plant-derived secondary metabolites isolated from Acer (maple) species, frequently described as glycosidic natural products. Specific ring systems, sugar identity, and aglycone substitution patterns for Aceroside VII should be confirmed from primary literature or the item’s CoA.
2D structural description (general):
If Aceroside VII follows the common “phenolic/phenylpropanoid glycoside” motif cited for some Acer metabolites (literature), the 2D structure typically displays an aromatic aglycone bearing hydroxy/alkoxy substituents, O‑glycosidically linked to one or more carbohydrate residues. This is provided as general context only; do not treat as item-specific without verifying against the CoA or primary literature for CAS 104109-45-7.
Synthetic Utility
Item-specific reactivity data are not provided. The notes below reflect general considerations for glycosidic/phenolic natural products and should be verified for Aceroside VII based on its confirmed structure.
Functional group landscape (general): Glycosides often feature multiple alcohols (on sugar residues) and phenolic or benzylic OH groups on the aglycone. These handle points enable protection–deprotection strategies (acetyl, benzyl, silyl) and derivatizations (acylations, etherifications) for analytical or SAR studies.
Derivatization for analytics: Per-acetylation or silylation can improve volatility and GC–MS detectability; isotopic labeling of specific hydroxyls can support mechanistic studies.
Enzymatic transformations: Glycosidases and glycosyltransferases may process related substrates, enabling chemoenzymatic access to analogs, though substrate scope must be verified experimentally for Aceroside VII.
Cross-coupling/oxidation (aglycone-dependent): If the aglycone bears aryl halides or activated positions (literature context), Suzuki/Miyaura or oxidative coupling could provide analog generation; applicability is structure-dependent and not asserted for this item.
Use case:
Employ Aceroside VII as a reference scaffold in SAR by derivatization, while retaining a parent standard for benchmarking. Characterize each derivative by NMR, HRMS, and HPLC to track purity and stability.
Target Specificity
Not applicable. Aceroside VII is a small molecule and not an antibody or biological macromolecule with defined antigen/epitope specificity.
No clone, isotype, species reactivity, or epitope data apply to this product.
If used in biochemical assays, any target engagement or selectivity profiles must be determined empirically and are not provided in this listing.
Frequently Asked Questions
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 104109-45-7, the molecular formula is C25H34O8, and the molecular weight is 462.53 g/mol. InChIKey MAUAGULXOHJIER-MVMXRKHSSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.