Exerts both phospholipase and triglyceride lipase activities. More active as a phospholipase than a triglyceride lipase. Hydrolyzes triglycerides, both with short-chain fatty acyl groups (tributyrin) and long-chain fatty acyl groups (triolein) with similar levels of activity toward both types of substrates. Hydrolyzes high density lipoproteins (HDL) more efficiently than other lipoproteins.
Host species
Mouse
Specificity
LIPG
Immunogen
Recombinant full length protein of human LIPG produced in HEK293T cell.
Positive Control
WB: HEK293T transfected with pCMV6-ENTRY LIPG cDNA for 48 hrs; SVT2, COS7, MDCK lysates. IHC: Human kidney, liver carcinoma, ovary adenocarcinoma, prostate tissues. IF/ICC: COS7cells transiently transfected with pCMV6-ENTRY LIPG. Flow Cytometry: HEK293T c
Conjugation
Unconjugated
SDS-PAGE
150 kDa
Purification Method
Protein G purified
Concentration
See COA
Product Line
biological_products
Storage and Shipping
Shape
Liquid
Storage
Store at -20°C,Avoid repeated freezing and thawing
Shipped In
Ice chest + Ice pads
Stability And Storage
Store at 4℃ short term (1-2 weeks). Store at -20℃ long term (12 months). Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Tested applications, recommended dilutions, and positive control materials are not provided in the Product Data for this item.
Validated applications (WB, IHC, IF, ELISA, IP), working dilutions, incubation times, and tissue/cell controls: Not specified for this item; refer to CoA/Spec Sheet.
Note: Users should perform preliminary titration and optimization in their own assay matrices following standard immunoassay practices.
Biological Roles
Background on the antigen (literature/general): LIPG (Endothelial lipase) is a member of the triglyceride lipase family predominantly associated with the vascular endothelium. It exhibits phospholipase and, to a lesser extent, triglyceride lipase activity.
Function: Modulates high-density lipoprotein (HDL) metabolism by hydrolyzing HDL phospholipids, thereby influencing HDL particle size and turnover. It can also act on other lipoprotein classes depending on context.
Expression: Enriched in endothelial cells; expression can be regulated by inflammatory stimuli and metabolic state (literature). Cellular localization includes the cell surface and extracellular environment, often interacting with heparan sulfate proteoglycans.
Pathway context: Intersects with lipid transport and metabolism pathways, including reverse cholesterol transport, and can be modulated by cytokines and growth factors. Interaction with apolipoproteins and lipoprotein receptors shapes its activity and substrate access.
Use of this antibody (context): An anti-LIPG monoclonal antibody facilitates investigation of LIPG expression, regulation, and biochemical function in cells and tissues via immunochemical assays. No therapeutic or diagnostic claims are made for this product (Research Use Only per Product Data).
Buffer Applications
Buffer selection influences antibody performance across immunoassays.
General guidance (literature/best practice):
Stock handling: If provided as a liquid, maintain the supplied buffer composition. For working dilutions, PBS or TBS at pH 7.2–7.6 is typical. Include 0.05–0.1% Tween-20 for washing steps to reduce nonspecific binding.
Blocking: Choose blockers consistent with detection chemistry—5% non-fat milk for HRP-based WB, or 1–5% BSA/serum for phospho-sensitive or biotin–streptavidin systems.
IHC antigen retrieval: Citrate buffer (10 mM, pH 6.0) or Tris-EDTA (pH 9.0) are commonly used; optimize retrieval time and temperature for antigen accessibility.
Storage buffers: For aliquots, addition of 40–50% glycerol can allow −20 °C storage without freezing; ensure compatibility with downstream assays. If sodium azide is present, avoid HRP activity assays and live-cell exposure.
Item-specific buffer formulation is not provided: Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
For antibody reagents, greener practices focus on formulation choices, storage formats, and workflow design rather than solvent replacement.
Greener considerations (general):
Shipping and storage: Concentrated or lyophilized formats reduce cold-chain footprint; however, this item is shipped cold (Ice chest + Ice pads) and stored at −20 °C (Product Data). Consolidate shipments and aliquot to minimize waste.
Preservatives: Sodium azide is effective but hazardous to aquatic environments. Azide-free formulations or ProClin-type alternatives may be preferred where feasible; verify formulation (not specified for this item).
Stabilizers: Glycerol enables −20 °C storage without freezing; consider 50% glycerol aliquots to avoid dry ice shipments and reduce freeze–thaw cycles (general practice), provided it suits your application.
Process: Use micro-volume assays, mini-blots, or high-sensitivity detection to reduce reagent consumption. Reuse wash buffers where contamination risk is low.
Comparison (general):
Azide-preserved liquid vs. lyophilized, azide-free: Liquid offers convenience; lyophilized can improve room-temperature robustness and reduce shipping energy. Tradeoffs include reconstitution variability and potential loss of activity if improperly rehydrated.
Pharmaceutical Uses
This product is designated For research use only (Product Data) and is not intended for diagnostic, therapeutic, or clinical applications.
General, non-clinical laboratory and manufacturing contexts where research-grade antibodies may be used:
Process development: As analytical reagents in upstream/downstream bioprocess development to monitor target protein expression or impurity profiling (not for GMP release testing unless qualified).
Preformulation research: As capture/detection agents in exploratory immunoassays to profile target expression in research samples.
Platform assay development: Early-stage feasibility studies for ELISA/Western blot protocols prior to transferring to qualified reagents.
No pharmacopeial status, excipient role, or clinical formulation information is provided for this item.
Physical Properties
Item-specific physicochemical specifications are not provided for this antibody preparation.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Concentration/formulation: Not specified for this item; refer to CoA/Spec Sheet.
pH, buffer salts, preservatives: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight (antibody as a biomolecule): Typically ~150 kDa for an IgG (literature). Exact mass depends on isotype, glycosylation, and formulation.
Solubility: Antibodies are water-soluble proteins, typically supplied in buffered aqueous solutions (e.g., PBS or TBS) (general/literature). Specific buffer for this item is not specified.
Isoelectric point (pI): Varies by clone/isotype (commonly pI ~6–9 for IgG; literature). Not determined for this item.
Stability considerations (general): Stability is influenced by temperature, freeze–thaw cycles, pH, ionic strength, and presence of stabilizers such as glycerol, sugars, BSA, or carrier proteins (literature). For this item, avoid repeated freezing and thawing (Product Data).
Quality and Grades
Item-specific grade, purity, and QC metrics are not provided in the Product Data.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
General notes on antibody quality for professional users:
Monoclonal antibody quality is typically characterized by: isotype/subclass determination, purity by SDS-PAGE, endotoxin (for cell work), concentration by A280 or BCA, and application validation (e.g., WB, IHC, IF, ELISA). Lot-specific performance can vary; always refer to the Certificate of Analysis (CoA).
Low background performance depends on clone specificity and formulation (e.g., carrier-free vs. BSA-containing). Carrier-free preparations are preferred for conjugation; BSA-containing formats can enhance stability for routine immunoassays.
If sodium azide is present (not specified here), it inhibits microbial growth but is incompatible with HRP activity in some settings and with live cells. Glycerol at 40–50% (v/v) can enable storage at −20 °C without freezing; verify formulation prior to dilution.
For critical applications (quantitative immunoassays, flow cytometry), confirm lot-specific affinity/avidity and epitope recognition if provided. Absent such details, empirical titration in your assay matrix is recommended.
Reaction and Applications
As an antibody reagent, this product is used in immunochemical applications rather than synthetic chemical reactions.
General research applications for a LIPG-targeting mouse monoclonal antibody (literature/context):
Western blotting (WB): Detection of LIPG protein levels in cell/tissue lysates following SDS-PAGE and transfer.
Immunocytochemistry/Immunofluorescence (ICC/IF): Visualization of subcellular localization of LIPG in fixed cells.
Immunohistochemistry (IHC): Detection in formalin-fixed paraffin-embedded (FFPE) or frozen tissue sections with optimized antigen retrieval.
ELISA/Sandwich immunoassays: As capture or detection reagent when paired with a non-competing anti-LIPG antibody; requires validation.
Immunoprecipitation (IP): Enrichment of LIPG and associated complexes from lysates; dependent on epitope accessibility.
Practical tips (general):
Validate species reactivity and application suitability empirically when item-specific data are not provided.
Optimize antibody dilution/titers by checkerboard titration in your assay matrix; include positive/negative controls.
Maintain cold chain and avoid repeated freeze–thaw to preserve binding activity (Product Data).
Reaction Conditions
While not a reagent for chemical synthesis, antibody performance depends on assay conditions. The following are general, literature-based guidelines to aid method development when item-specific protocols are unavailable.
Western blot (general): Block 1 h at room temperature (RT); primary incubation 1–16 h at 4 °C or 1 h at RT in TBST with 1–5% BSA or milk. Typical primary antibody working ranges span 0.1–2 µg/mL (optimize empirically). Wash 3×5–10 min; HRP- or fluorescent secondary per manufacturer guidance.
IHC (general): Employ heat-induced epitope retrieval (e.g., citrate pH 6 or Tris-EDTA pH 9). Incubate primary 1–16 h at 4 °C. Include appropriate controls (isotype, no-primary, known positive tissue). Detection via HRP/DAB or fluorescence.
IF/ICC (general): Fix with PFA or methanol per antigen requirements; permeabilize with 0.1–0.3% Triton X-100 if intracellular. Primary 1–2 h RT or overnight 4 °C; use species-appropriate fluorescent secondary antibodies. Protect from light.
IP (general): 1–5 µg antibody per mg lysate protein; incubate 1–4 h (or overnight) at 4 °C with Protein A/G beads (choice depends on isotype/subclass).
Note: The exact optimal conditions and dilutions for this item are not specified; perform titration in your system.
Safety and Handling
Safety information specific to this product is limited in the provided data; consult the SDS for authoritative guidance.
GHS classification: Not specified for this item; refer to SDS.
Signal word/H-statements/Pictograms: Not specified for this item; refer to SDS.
Likely hazard profile (general): Antibody solutions are typically classified as non-hazardous but may contain preservatives (e.g., sodium azide) or stabilizers; verify label/SDS for this lot.
Handling and PPE (general laboratory best practice):
Wear lab coat, gloves, and safety glasses.
Avoid ingestion, inhalation of aerosols, and contact with skin/eyes. Work in a clean area to prevent microbial contamination.
Use caution when handling materials potentially containing sodium azide; avoid contact with copper/lead plumbing to prevent azide salt formation. Dispose according to institutional guidelines.
First aid (general):
Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical attention if irritation persists.
Ingestion/inhalation: Move to fresh air; rinse mouth; seek medical attention if unwell.
Incompatibilities and special risks:
Avoid repeated freezing and thawing (Product Data), which can denature protein and reduce performance.
Store segregated from proteases and microbial contamination sources; use sterile technique when aliquoting.
Solvent Selection
This product is a protein solution (antibody). Organic solvent selection is not typically applicable. Instead, focus on compatible aqueous buffers.
General buffer compatibility (literature/best practice):
Common working buffers: PBS (pH 7.2–7.6) or TBS (pH 7.4–8.0) with 0.05–0.1% Tween-20 for washing in immunoassays. Blocking buffers may include 1–5% BSA, non-fat milk, or serum depending on application.
Avoid extremes of pH and high ionic detergents unless validated for your assay. Maintain isotonic conditions for cell-based applications.
For conjugation or functional assays, carrier-free, low-salt buffers free of amines (for NHS coupling) or free of azide (for HRP activity, live-cell work) are preferred.
Small comparison (general):
PBS: isotonic, widely compatible; phosphate can interfere with certain metal-dependent interactions.
TBS: beneficial when phosphate-sensitive; slightly higher pH buffering range.
HEPES: good for live-cell work due to minimal CO2 dependence; verify compatibility with downstream steps.
Storage and Reconstitution
Follow the product-specific storage guidance to maintain antibody integrity.
Storage temperature: Store at −20 °C (Product Data).
Freeze–thaw: Avoid repeated freezing and thawing (Product Data). Aliquot upon first thaw to minimize cycles.
Shipping conditions: Shipped in an ice chest with ice pads (Product Data) to maintain a cold chain.
Buffer composition, stabilizers, and preservative: Not specified for this item; refer to CoA/Spec Sheet.
Reconstitution: If supplied lyophilized (not specified), reconstitute with sterile, antibody-compatible buffer (e.g., PBS) to the desired concentration, gently mix without vortexing, and allow to equilibrate on ice. If supplied as liquid, mix gently and spin briefly before opening to collect contents.
Long-term storage (general): For many antibody formulations, aliquots with 40–50% glycerol enable −20 °C storage without freezing; verify compatibility with your assays and the specific formulation.
Handling: Keep on ice during use. Use sterile, low-protein-binding tubes and tips to reduce adsorption and contamination.
For lot-specific details, consult the CoA/Spec Sheet and SDS.
Structure and Identity
LIPG Mouse mAb is a mouse monoclonal antibody reagent intended for research use. Item-specific small-molecule identifiers are not applicable to antibodies.
SKU: Ab113207
Product name: LIPG Mouse mAb (monoclonal antibody, mouse host)
Antigen target: LIPG (Endothelial lipase) — inferred from product name; no epitope mapping provided.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES/InChI/InChIKey/CAS/PubChem CID: Not applicable to protein biologics.
General structural description (literature):
Typical monoclonal antibodies are immunoglobulins (~150 kDa for IgG) composed of two heavy and two light chains connected by disulfide bonds, forming a Y-shaped structure with variable domains (VH/VL) conferring antigen recognition and constant domains (CH/CL) defining isotype/effector properties.
The antigen-binding fragments (Fabs) recognize specific epitopes on the target protein, while the Fc region determines interactions with Fc receptors and complement. Exact isotype, subclass, and epitope for this product are not specified.
Synthetic Utility
Not typically applicable. As a monoclonal antibody reagent, this product is not used as a chemical building block or reagent in organic synthesis. For relevant details, see the sections on Reaction & Applications, Buffer Applications, and Reaction Conditions, which address its use in immunochemical assays.
Target Specificity
Only information derivable from the Product Data is provided here.
Target name: LIPG (Endothelial lipase) — inferred from product name “LIPG Mouse mAb.”
Antibody type: Monoclonal antibody (mAb).
Host species: Mouse.
Clone ID, isotype/subclass, epitope, species reactivity, cross-reactivity, and validated applications: Not specified for this item; refer to CoA/Spec Sheet.
Recommendation: Verify species reactivity and application suitability in your system. Include appropriate positive and negative controls when establishing assays.
Frequently Asked Questions
How should this product be stored?
Store at ?20 °C. Avoid repeated freeze–thaw cycles. Aliquot into single-use volumes before freezing.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Which species reactivity has this antibody been validated against?
Validated reactivity is listed on the PDP and on each lot's datasheet. We validate against the most commonly tested species for the target (LIPG Mouse mAb); cross-reactivity in untested species may exist but is not guaranteed. Contact technical support for specific species inquiries.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.