MacConkey Agar without Salt - BioReagent

Cat. No.: M1528462
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Size
Germany (EU)
USA*
Price
Qty
250g
M1528462-250g
Made to order · 8–12 wks
€112.72
Enter a quantity for the sizes you want to add.

Overview

For isolation of Proteus and Escherichia coli in urine

Specifications

Specifications & Purity
BioReagent
Storage
Room temperature
Shipped In
Normal
Grade
BioReagent
Product Line
biological_products

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Reviews

Customer Reviews

Application Protocols

Tested applications, recommended dilutions, or specific protocols are not provided in the Product Data for this item.

  • For authoritative, item-specific protocols: Not specified for this item; refer to CoA/Spec Sheet and the product label.

  • General practice reminder: Follow institutional SOPs for media preparation, sterilization, plating, incubation, and quality control when using selective/differential media.

Biological Roles

This product functions as a selective and differential growth environment; it does not have an intrinsic biological role like a pure metabolite. The following describes how its components influence microbial physiology (literature/general):

  • Selective agents

    • Bile salts mimic intestinal bile, inhibiting many Gram-positive organisms while permitting growth of enteric Gram-negative rods.
    • Crystal violet further suppresses Gram-positive cell wall synthesis.
  • Differential system

    • Lactose provides a fermentable carbohydrate. Fermentation generates organic acids that lower local pH.
    • Neutral red acts as a pH indicator; under acidic conditions it accumulates in colonies and turns red/pink, signaling lactose fermentation.
  • Matrix and nutrients

    • Agar provides a non-nutritive, inert gel matrix supporting discrete colony formation.
    • Peptones/tryptones supply amino acids, peptides, and growth factors to support a broad spectrum of nonfastidious bacteria.
  • Impact of “without salt”

    • Lowered ionic strength can affect osmotic stress responses, motility, and outer membrane porin regulation in Enterobacteriaceae, providing a useful context for studying salt-sensitive phenotypes or avoiding Na+-dependent regulatory effects.

No clinical/diagnostic claims are made; this product is intended for research use only (per Product Data).

Buffer Applications

Not typically used as a buffer. While the prepared medium exhibits some intrinsic buffering from peptones and phosphate traces (literature), MacConkey Agar without Salt is designed for selective/differential microbial culture rather than pH buffering applications.

  • If a defined buffering system is required, consider standard laboratory buffers (e.g., phosphate, MOPS, HEPES) prepared separately and used in compatible assays.

For effective use, see the sections on Reaction & Applications and Storage & Reconstitution.

Green Alternatives

As a water-based, agar-solidified medium, MacConkey Agar without Salt is already aligned with several green chemistry principles (benign solvent, renewable gelling agent). Environmental considerations focus on responsible preparation and disposal.

  • Comparative perspective (literature/general)

    • Solvent system: Water vs. organic solvents — preparation is entirely aqueous, avoiding VOCs.
    • Gelling agent: Agar is derived from renewable red algae; alternatives like synthetic gels may have higher environmental footprints.
    • “Without Salt”: Reduced sodium chloride in effluent compared to standard MacConkey may slightly reduce salinity load in waste streams.
  • Greener practice tips

    • Prepare only the volume needed to minimize waste; unused sterilized medium can be stored refrigerated and used within a reasonable period (follow local practice and QC testing).
    • Use energy-efficient autoclave cycles appropriate for load size; avoid unnecessary repeated sterilizations.
    • Decontaminate spent media by autoclaving before disposal; segregate plastics for recycling where permitted after sterilization.
    • Choose reusable glassware (flasks, plates where feasible) to reduce single-use plastics.
  • Alternatives by function (literature)

    • Chromogenic coliform media can reduce ambiguous interpretations, potentially lowering repeat testing.
    • Buffered minimal media for specific assays may reduce complex organic load but sacrifice selectivity/differentiation offered by MacConkey.
Pharmaceutical Uses

No therapeutic or clinical uses are claimed. For research and laboratory quality control only (per Product Data: For research use only).

  • Context in pharmaceutical microbiology (literature/general)

    • MacConkey agar is widely referenced for the detection and differentiation of Enterobacteriaceae in microbiological testing workflows. Specific compendial compliance of this item is not stated here.
    • Potential roles include raw material/environmental monitoring studies or method development where reduced sodium chloride is desired to assess organism behavior under lower ionic strength.
  • Compliance and specifications

    • Pharmacopeial status, growth promotion test ranges, and any lot-specific performance criteria: Not specified for this item; refer to CoA/Spec Sheet.
    • Sterility: Dehydrated medium is non-sterile and requires sterilization after reconstitution.
  • Formulation and handling notes

    • Use validated preparation and incubation conditions aligned with internal SOPs and applicable standards when employing this medium in regulated environments.
Physical Properties

Item-specific properties not provided in Product Data; consult the product label/CoA for exact specifications. The following are typical literature characteristics for dehydrated MacConkey-type media without added NaCl and are provided for general reference only.

  • Physical state (literature): Dehydrated, free-flowing powder; prepared medium forms a firm red to reddish-purple gel.
  • Solubility (literature): Readily dispersible in purified water; components dissolve upon heating to near boiling; forms an agar gel on cooling.
  • pH of prepared medium (literature): ~7.1 ± 0.2 at 25 °C after sterilization.
  • Gelation (literature): Solidifies at approximately 42–45 °C; typical agar final concentration around 1.3–1.5% w/v in common recipes.
  • Color/indicator behavior (literature): Neutral red is yellowish-orange above pH ~6.8 and red below pH ~6.8; lactose-fermenting colonies appear pink to red with possible bile precipitate.
  • Density, refractive index, logP, specific conductivity: Not specified for this item; refer to CoA/Spec Sheet.

Practical notes

  • Use freshly prepared, homogenous media; avoid localized overheating to prevent caramelization of sugars and indicator degradation.
  • Water quality affects clarity and performance; use purified, low-ionic-strength water to maintain the “without salt” characteristic.
Quality and Grades
  • Grade supplied: BioReagent (per Product Data).

    • BioReagent typically indicates suitability for laboratory biological applications, with attention to microbiological performance parameters such as selectivity, differential response, and growth support. It does not inherently imply pharmacopeial compliance or sterility of the dehydrated powder.
  • Item-specific notes

    • Storage Conditions: Room temperature (per Product Data). Protect from moisture and light to preserve indicator and prevent clumping.
    • Shipped: Normal (per Product Data). No cold chain required for dehydrated medium.
  • What BioReagent means in practice

    • Emphasis on consistent lot-to-lot performance in recovery and differentiation tests (e.g., lactose fermenters vs non-fermenters) when prepared as directed.
    • Indicator/dye levels are balanced for readability without excessive background; bile salts and crystal violet tuned for Gram-negative selectivity.
  • Documentation

    • For exact performance specifications (e.g., pH after autoclave, growth/purity controls, recommended preparation), refer to the product label and Certificate of Analysis. Where a specific value is not provided here: Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications

Chemical reaction content is not applicable. Applications pertain to microbiological culture and differentiation.

  • Intended laboratory applications (literature)

    • Selective isolation of Gram-negative, bile-tolerant enteric bacteria from mixed samples by inhibiting many Gram-positive organisms via bile salts/crystal violet.
    • Differential detection of lactose fermentation using neutral red: fermenters (e.g., Escherichia coli) produce pink to red colonies with possible bile precipitate; non-fermenters (e.g., Salmonella, Shigella) remain colorless to pale.
    • “Without Salt” variant is suited for evaluating organisms under reduced NaCl/osmotic conditions, mitigating Na+-dependent phenotypes, or compatibility with assays sensitive to added chloride/sodium.
  • Performance notes (literature)

    • Incubate plates in the aerobic atmosphere at 35–37 °C for 18–24 h for standard QC strains; adjust conditions as needed for environmental isolates.
    • Overheating during preparation darkens the medium and can reduce lactose/indicator performance; dissolve just to clarity and promptly autoclave.
    • Excessive surface moisture can blur colony morphology; allow plates to dry (lid ajar in sterile environment) before use.
  • Quality control organisms (literature examples)

    • Positive (growth/fermentation): E. coli (pink/red colonies, bile precipitate).
    • Selectivity check: S. aureus (partial to inhibited growth); Enterococcus spp. typically inhibited.
    • Non-fermenter morphology: Salmonella/Proteus (colorless to pale).
Reaction Conditions

Chemical reaction conditions are not relevant. The following are general culture conditions for the intended microbiological application (literature/general guidance):

  • Preparation environment

    • Dissolve the dehydrated medium in purified water with heat and agitation until fully melted and uniform; avoid prolonged boiling. Autoclave at 121 °C for ~15 minutes. Cool to 45–50 °C before pouring plates.
  • Incubation parameters

    • Typical incubation for Enterobacteriaceae isolation: 35–37 °C, aerobic, 18–24 h. Some organisms may require extended incubation (up to 48 h) for discernible lactose reaction.
  • Expected outcomes (QC organisms, literature)

    • Lactose fermenters: pink to red colonies with possible zone of precipitated bile.
    • Non-fermenters: colorless to pale colonies, medium background remains relatively unchanged.
  • Yield/throughput considerations

    • Plate dryness and streaking technique critically influence colony isolation quality. Allow plates to equilibrate and surface-dry before inoculation.

Note: Exact preparation quantities and pH targets for this specific item are Not specified for this item; refer to CoA/Spec Sheet and follow label instructions.

Safety and Handling

GHS classification and hazard statements are not provided in the Product Data for this item. Refer to the SDS for authoritative safety information.

  • GHS/Signal Word/Pictograms: Not specified for this item; refer to SDS.
  • Primary hazards (general for dehydrated media)
    • Nuisance dust; may cause mechanical eye/respiratory irritation upon handling powdered material.
    • Contains dyes (e.g., crystal violet, neutral red) that can stain skin and surfaces; crystal violet is harmful if ingested and can cause eye/skin irritation.
  • PPE and engineering controls
    • Wear lab coat, gloves, and safety glasses; handle powders in a dust-controlled area or fume hood if dust generation is likely.
    • Avoid inhalation of dust; minimize aerosolization when weighing/mixing.
  • Incompatibilities and special risks
    • Avoid strong oxidizers and strong acids/bases during storage. Prepared plates/media should not contact disinfectants prior to use.
    • Autoclaving: Do not seal tightly during sterilization; allow venting to prevent vessel rupture. Overheating can degrade lactose and pH indicator.
  • Microbiological safety
    • Once inoculated, treat cultures and spent plates as biohazardous; autoclave before disposal in accordance with institutional biosafety protocols.
  • First aid (general)
    • Eye/skin contact: Rinse with water. If irritation persists, seek medical attention. Inhalation: Move to fresh air. Ingestion: Rinse mouth; seek advice.

Always defer to the SDS and institutional biosafety procedures for comprehensive guidance.

Solvent Selection

Not a solvent; this product is a dehydrated culture medium intended for reconstitution in water.

  • Reconstitution medium (applicable)

    • Use purified water (e.g., ASTM Type II or better). High ionic strength water will negate the “without salt” characteristic by adding extraneous ions.
  • Miscibility/polarity

    • The powdered medium components are heterogeneous; upon heating in water, peptones and salts dissolve, agar hydrates and forms a gel upon cooling. Organic solvents are not used for preparation and can denature components and disrupt gelation.
  • Practical selection guidance

    • Choose freshly produced, degassed water to minimize bubble formation in plates.
    • Avoid buffering agents or added electrolytes unless a specific experimental design requires them; additional salts will alter selectivity/osmolarity.
  • Comparison (use-case oriented)

    • MacConkey Agar (classic, with NaCl): Standard osmolarity; useful for general Enterobacteriaceae screening.
    • MacConkey Agar without Salt (this product): Reduced ionic strength; preferable for halotolerance studies, when Na+ interferes with phenotypes, or when testing osmosensitive strains.
Storage and Reconstitution
  • Storage (item-specific)

    • Store the dehydrated medium at room temperature (per Product Data). Keep tightly closed in a dry place; protect from humidity and light to preserve indicator performance and prevent caking.
    • Shipped: Normal (per Product Data).
  • Reconstitution and sterilization (literature/general guidance)

    • Typical preparation: Suspend the recommended grams of powder per liter of purified water (literature formulations of MacConkey without NaCl often target ~50 g/L; confirm with product label). Heat with stirring to dissolve completely; avoid scorching.
    • Adjustments: Do not add NaCl unless required by your protocol; doing so negates the “without salt” feature.
    • Sterilize by autoclaving at 121 °C for ~15 minutes. After autoclaving, cool to 45–50 °C, mix to ensure homogeneity of indicator, and pour plates (20–25 mL per 90 mm plate, typical laboratory practice).
    • Final pH target (literature): ~7.1 ± 0.2 at 25 °C after sterilization. Verify with a calibrated pH meter if critical to your assay.
  • Post-preparation handling (general)

    • Allow plates to set and surface-dry in a sterile environment before use to improve colony definition.
    • Store poured plates inverted in sealed sleeves at 2–8 °C to preserve performance; equilibrate to room temperature before use. Maximum hold time depends on local QC; monitor for dehydration, color shift, or contamination.

Where a specific value is not provided above, it is Not specified for this item; refer to CoA/Spec Sheet.

Structure and Identity

MacConkey Agar without Salt is a complex, dehydrated microbiological culture medium rather than a single defined molecule; it does not have a unique molecular formula, molecular weight, SMILES, or InChIKey.

  • Item-specific identifiers

    • SKU: M1528462
    • Product Name: MacConkey Agar without Salt
    • Grade: BioReagent (per Product Data)
    • CAS: Not applicable (complex mixture)
    • Molecular Formula: Not applicable to complex mixtures
    • Molecular Weight: Not applicable to complex mixtures
    • SMILES/InChIKey: Not applicable to complex mixtures
  • Structural features (general composition, literature)

    • Typical MacConkey media are composed of a nutrient base (enzymatic digests of casein/animal tissues), a carbohydrate (lactose) for differentiation, bile salts and crystal violet for Gram-negative selectivity, neutral red as a pH indicator, and agar as the gelling agent.
    • “Without Salt” indicates omission of added sodium chloride (NaCl) found in classical formulations; this reduces medium ionic strength/osmolarity relative to standard MacConkey agar.
  • 2D conceptual description (literature)

    • Agar is a linear polysaccharide matrix (agarose + agaropectin) providing a gel network.
    • Bile salts and crystal violet inhibit Gram-positive bacteria.
    • Lactose fermentation produces acid that protonates neutral red, yielding red/pink colonies with bile precipitate around strong fermenters; non-fermenters remain colorless to pale.
Synthetic Utility

Not applicable. This product is a complex microbiological growth medium and is not used as a reagent or building block in chemical synthesis.

For laboratory relevance, see Reaction & Applications and Storage & Reconstitution for preparation and microbiological use.

Target Specificity

This section typically applies to antibodies or affinity reagents. No antigen/epitope/clone data are provided for this product.

  • Applicability to this product: Not applicable. MacConkey Agar without Salt is a culture medium and does not possess antibody-like target specificity.

  • General selectivity (literature, for user context): The formulation is selective for Gram-negative, bile-tolerant enteric bacteria and differential for lactose fermenters vs non-fermenters via neutral red indicator. These are functional culture selectivity characteristics, not immunochemical specificity.

Need help choosing the grade?

Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.

View BioReagent grade guide →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.