MS-PEG5-THP , CAS No.M1445599

CAS: M1445599 Cat. No.: M1445599 Formula: C16H32O9S Molecular Weight: 400.48
AVAILABLE TO ORDER
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Size
Germany (EU)
USA*
Price
Qty
1mg
M1445599-1mg
Made to order · 8–12 wks
Enter a quantity for the sizes you want to add.

Overview

MS-PEG5-THP is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.

Specifications

Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
This product requires cold chain shipping. Ground and other economy services are not available.
Names and Identifiers
Molecular Weight
400.48

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Reviews

Customer Reviews

Application Protocols

No item-specific, validated biological assay protocols are provided for this small-molecule linker.

General workflow examples (literature guidance; adapt to your substrates):

  • SN2 installation onto a primary amine:
    1. Dissolve amine (1.0 eq) and DIPEA (2.0 eq) in dry DMF under N2.
    2. Add MS-PEG5-THP (1.2–1.5 eq) at 0–5 °C; stir 2–12 h at rt, monitor by LC/MS.
    3. Dilute with water, extract with EtOAc, wash, dry, concentrate; purify by flash or RP-HPLC.
  • THP deprotection to reveal alcohol:
    1. Dissolve intermediate in MeOH with PPTS (5–10 mol%).
    2. Stir at rt until complete (TLC/LCMS). Quench with sat. NaHCO3, extract, and purify.
  • Subsequent carbonate activation (example):
    1. To the free alcohol in dry DCM at 0 °C, add CDI (1.2 eq). Stir to room temp, then add amine nucleophile to form carbamate-linked products.

These are illustrative only. Optimize stoichiometry, temperature, and solvent for your specific system. For any regulated use or scale-up, consult your internal SOPs and validate conditions.

Note: No tested applications or recommended dilutions are specified for this item; refer to CoA/Spec Sheet.

Biological Roles

This product is intended for research use as a synthetic spacer/linker. It is not designed to exert a biological effect.

General context (literature):

  • PEG linkers: Poly(ethylene glycol) fragments are widely used to modulate hydrophilicity, reduce protein adsorption, and increase aqueous compatibility of small molecules, surfaces, and biomaterials.
  • Function in bioconjugation: PEG spacers can increase the effective distance between a ligand and a surface or payload, improving accessibility and reducing steric hindrance in affinity probes and sensors.
  • In biological media: PEGylation can reduce nonspecific interactions and aggregation; however, exact behavior depends on chain length, end groups, and grafting density.

No intrinsic biological pathway, receptor, or enzymatic role is associated with MS-PEG5-THP itself. Any biological performance outcomes derive from the constructs into which this linker is incorporated.

Caveats:

  • Avoid interpreting PEGylation effects as therapeutic claims; this product is for research use only.
  • End-group reactivity (mesylate, THP) is primarily of synthetic relevance and is not intended for direct biological exposure without appropriate conversion to biocompatible functionalities.
Buffer Applications

Not typically applicable. MS-PEG5-THP is a synthetic linker, not a buffering agent. It does not define a pH regime or confer buffering capacity.

Practical note (general):

  • During deprotection or coupling steps that involve aqueous media, choose buffers that are compatible with your chemistry. For THP deprotection, mildly acidic conditions (e.g., acetate buffer pH ~4–5) are sometimes used; however, acidic conditions will also hydrolyze acid-sensitive groups and may risk mesylate stability.
  • For bioconjugation after functional group interconversions, common buffers (PBS, HEPES) may be used depending on the downstream reactive handles installed, not for the native MS-PEG5-THP material.

Item-specific buffer recommendations are Not specified for this item; refer to CoA/Spec Sheet and your reaction design.

Green Alternatives

Greener considerations focus on solvent and reagent choices used with MS-PEG5-THP; the molecule itself is a PEG-based spacer, which is generally regarded as benign but may involve non-green steps in synthesis.

Solvent choices (literature comparisons):

  • Replace DCM with 2-MeTHF, EtOAc, or CPME when feasible (reduced chlorinated solvent use; good extraction/processing performance).
  • Favor acetonitrile or propylene carbonate over DMF/NMP where possible (lower reproductive toxicity concerns vs NMP; waste handling still required).
  • For THP deprotection, aqueous ethanol or acetone/water with catalytic organic acids (e.g., PPTS) can be preferable to strong mineral acids.

Reagent alternatives:

  • Use organic-soluble mild acids (PPTS, CSA, camphorsulfonic acid) for THP removal instead of HCl/TFA in chlorinated solvents.
  • For O-/S-alkylations, consider carbonate bases (K2CO3) in green solvents (MeCN, 2-MeTHF) with phase-transfer catalysis instead of strong bases in DMF.

Small comparison (literature, qualitative):

  • DCM vs 2-MeTHF: 2-MeTHF is bio-based, higher boiling, and recyclable; may require longer reaction times for some SN2 substitutions.
  • DMF vs MeCN: MeCN offers easier removal and lower toxicity profile; solubility of PEG reagents may be lower—test concentration and temperature.

Process suggestions:

  • Minimize protecting-group manipulations by selecting end-group orthogonality aligned with your route to reduce steps and solvent usage.
  • Employ solvent recycling and aqueous workups with salt minimization to reduce E-factor.

Note: These are general green chemistry strategies; validate compatibility with your substrates.

Pharmaceutical Uses

This product is supplied for research use only and is not intended for human or veterinary use, clinical diagnostics, or as an active pharmaceutical ingredient.

General formulation/manufacturing context (literature):

  • PEG segments are widely used in pharmaceutical development as excipients (e.g., PEGs as solvents, plasticizers) and as linkers in drug conjugates and prodrugs; however, suitability depends on exact structure, purity, and regulatory status.
  • Heterobifunctional PEG linkers can serve in the development of targeted conjugates, immobilization on device surfaces, or as intermediates en route to pharmaceutically acceptable functionalities (e.g., NHS carbonates, maleimides).

Regulatory considerations:

  • No pharmacopeial monograph is implied for MS-PEG5-THP. Any use in GMP settings would require full qualification of identity, purity, residual solvents/metals, and stability per relevant guidelines.

Process guidance:

  • If transitioning from discovery to development, establish robust impurity profiles for PEG linkers (oligomer distribution, residual sulfonates, hydrolysis products) and define appropriate specifications.

Item-specific pharmacopeia status and excipient suitability are Not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

Item-specific values from Product Data:

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.

General/literature expectations for PEG5 mesylate/THP linkers (non-specification):

  • Physical state: Typically a waxy solid, viscous oil, or low-melting solid depending on exact end groups and purity.
  • Solubility (qualitative): Good solubility in polar aprotic organic solvents (DMF, DMSO, acetonitrile, dichloromethane, THF). Limited solubility in alkanes; variable in alcohols and water depending on termini.
  • Boiling/melting: Discrete BPs are rarely meaningful due to oligomeric nature and thermal decomposition; melting transitions often broad (literature observation for short PEGs).
  • Density/refractive index: Typically in the 1.05–1.15 g/mL and nD 1.45–1.47 ranges for PEG oligomers (literature, approximate).
  • LogP: PEGylation reduces logP versus hydrocarbon analogs; exact value depends on termini (literature trend).

Practical notes (general):

  • Hygroscopicity: Short PEG oligomers can be mildly hygroscopic; drying under high vacuum over P2O5 or molecular sieves before moisture-sensitive reactions is common practice.
  • Viscosity: Solutions in DMSO/DMF can be viscous at high concentration; warm gently (≤40 °C) to aid transfer.

All definitive physical specifications for this SKU are Not specified for this item; refer to CoA/Spec Sheet.

Quality and Grades

Item-specific grade/purity from Product Data:

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.

Interpretation and general guidance (for PEG linkers):

  • Research grade: In the absence of a declared analytical grade, assume research-use only. Our catalog explicitly notes: For research use only.
  • Purity reporting: PEG linkers are often characterized by NMR (1H, 13C), LC/MS, and sometimes HPLC area %. Because PEGs can present oligomeric distributions, CoA may report both average MW and purity of the principal species.
  • Water content/residual solvents: Important for moisture-sensitive substitutions; verify KF and residual solvent data on the CoA when planning scale-ups.
  • Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet. If present, stabilizers should be considered in downstream reactions and purification.

What the grade means in practice:

  • High-purity PEG linkers minimize side reactions (e.g., elimination from mesylate, mixed oligomer insertions) and improve coupling efficiency.
  • For chromatography-sensitive workflows (e.g., analytical comparisons), low UV background and absence of colored impurities is beneficial; inquire for HPLC traces if required.

Recommendation: Consult the CoA for exact assay method, purity, water content, and identification tests applicable to this SKU before use in regulated or critical experiments.

Reaction and Applications

Typical application profile for MS–PEG5–THP linkers (literature/general; adapt to your synthesis plan):

  • Heterobifunctional spacer: The mesylate end serves as an electrophile for SN2 displacement, enabling installation of the PEG5 spacer onto nucleophiles (thiols, amines, alcohols). The THP end masks an alcohol for later unveiling.
  • Stepwise assembly: Attach PEG to a substrate using the mesylate, then deprotect THP to liberate a terminal hydroxyl for further elaboration (e.g., carbonate/ester formation, activation to NHS carbonate, or oxidation to aldehyde).
  • Bioconjugation and materials: PEG spacers improve solubility, modulate sterics, and reduce non-specific binding in probes, surfaces, or polymers. MS–PEG–THP offers orthogonal reactivity control.
  • Surface modification: Mesylate substitution on surface-bound nucleophiles (e.g., thiol-terminated SAMs) can graft PEG chains; subsequent THP removal reveals reactive –OH for secondary functionalization.

Practical tips:

  • Nucleophiles: Use freshly prepared thiolates/alkoxides or primary amines. Secondary amines may compete with elimination; control temperature and base.
  • Bases and additives: DIPEA for amination; K2CO3/Cs2CO3 for O-alkylation; NaH for strong deprotonation when stable. Phase-transfer catalysts (TBAB) can aid less soluble systems.
  • Order of operations: If both ends are sensitive, perform mesylate substitution under anhydrous, neutral-to-basic conditions first; deprotect THP under carefully buffered mild acid to avoid undesired side reactions.

Always verify the exact termini of the supplied item on the CoA to align with your route design.

Reaction Conditions

General guidance from literature for PEG mesylate/THP systems; adjust to your substrates.

SN2 substitution on mesylate:

  • Solvents: Dry DMF, DMSO, MeCN, or THF.
  • Nucleophiles: Primary amines, thiolates, and alkoxides.
  • Base: DIPEA (amines), K2CO3/Cs2CO3 (alcohols), NaH (strong O-deprotonation when compatible).
  • Temperature: 0–60 °C (commonly 20–40 °C); lower temps reduce competing elimination, higher temps accelerate sluggish displacements.
  • Atmosphere: Anhydrous/inert (N2 or Ar) for moisture-sensitive substrates.
  • Time: 1–24 h depending on nucleophile and sterics.
  • Workup: Quench with water/brine, extract with EtOAc or DCM, dry, concentrate. Silica may cause streaking; reverse-phase or flash with polar modifiers can help.

THP deprotection:

  • Conditions: Catalytic acid in alcohol/water or acetone/water (e.g., PPTS 5–10 mol%, rt to 40 °C).
  • Time: Typically 0.5–4 h; monitor by TLC/LC-MS.
  • Neutralization: Triethylamine or sodium bicarbonate wash to remove acid; avoid strong base that could induce side reactions elsewhere.

Subsequent transformations of revealed –OH (examples):

  • Carbonate formation: CDI or p-nitrophenyl chloroformate in DCM/MeCN (0–25 °C) to furnish activated carbonates for coupling with amines.
  • Oxidation to aldehyde: TEMPO/BAIB or Dess–Martin in DCM/MeCN at 0–25 °C, then use for oxime/hydrazone formation in acetate buffer pH 4–5.

Note: Expected yields vary widely (50–90% typical for clean SN2 and THP deprotection in literature). Optimize on small scale first.

Safety and Handling

Authoritative safety data must be taken from the product SDS.

Item-specific hazard data from Product Data:

  • Signal Word: Not specified for this item; refer to SDS.
  • H-Statements: Not specified for this item; refer to SDS.
  • GHS Classification: Not specified for this item; refer to SDS.
  • Pictograms: Not specified for this item; refer to SDS.

General safety considerations for PEG-based mesylates/THP ethers (literature/common practice):

  • Likely hazards: Organic sulfonates and protected alcohols are commonly classified as irritants; avoid inhalation, ingestion, and skin/eye contact.
  • Peroxide formation: Not typically an issue for PEG oligomers; nonetheless, avoid prolonged storage in air and light for sensitive end groups.
  • Hydrolysis sensitivity: Mesylate is moisture-sensitive; THP ethers hydrolyze under acidic conditions. Keep dry and avoid strong acids unless deprotection is intended.
  • Incompatibilities: Strong bases and nucleophiles may react with the mesylate end group; strong acids will remove THP.

PPE and handling (good laboratory practice):

  • Wear lab coat, nitrile gloves, and safety glasses; handle in a chemical fume hood when weighing or preparing solutions.
  • Use anhydrous techniques for nucleophilic substitutions; maintain inert atmosphere if required by the reaction design.

First aid (general guidance; defer to SDS):

  • Skin/eye contact: Rinse with water for 15 minutes and seek medical attention.
  • Inhalation: Move to fresh air; obtain medical advice if symptoms persist.
  • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.

Waste: Collect organic PEG-containing waste in halogenated/non-halogenated streams as appropriate; dispose per institutional and local regulations.

Solvent Selection

MS-PEG5-THP is a functionalized PEG linker rather than a solvent. This section discusses solvent choices for dissolving and reacting this material.

General solvent compatibility (literature/typical):

  • Polar aprotic: DMF, DMSO, NMP, acetonitrile, and dichloromethane usually provide excellent solubility and support SN2 reactions at the mesylate end.
  • Ethers: THF, 2-MeTHF often acceptable; ensure anhydrous conditions for nucleophilic substitutions.
  • Alcohols/water: May promote hydrolysis of the mesylate or THP; avoid unless intentionally reacting or deprotecting.

Selection guidance by task:

  • SN2 substitution on the mesylate by amines/thiolates/alkoxides: Dry DMF, DMSO, or acetonitrile; add base (e.g., DIPEA, K2CO3) as appropriate. Lower-temperature DMF/MeCN can reduce elimination.
  • THP deprotection: Protic/acidic media such as MeOH/H2O with catalytic acid (e.g., PPTS, CSA) or acetone/H2O with dilute acid. Minimize exposure time to protect the mesylate, or sequence steps accordingly.
  • Workup/purification: DCM/EtOAc for extraction; MeOH or MeCN for HPLC; note that PEG materials can streak on silica—use gradient and end-capped phases or reverse-phase when needed.

Dielectric constants (literature, at 20–25 °C):

  • DMF ~36.7, DMSO ~46.7, MeCN ~36, DCM ~8.9, THF ~7.6. Higher values favor ionic SN2 chemistry.

Note: Item-specific solubility data are Not specified for this item; refer to CoA/Spec Sheet.

Storage and Reconstitution

Item-specific conditions from Product Data:

  • Storage Conditions: Store at -20°C.
  • Shipped In: Ice chest + Ice pads.

General storage guidance (compatible with the above and literature best practices):

  • Protect from moisture: Store in tightly sealed, dry containers. If supplied as a solid or viscous oil, consider desiccation (P2O5 or silica) within a sealed secondary container.
  • Protect from light and acids: THP end groups can hydrolyze under acidic environments; mesylates can hydrolyze with moisture.
  • Inert atmosphere: Optional but beneficial for long-term storage—flush headspace with dry nitrogen or argon after each use.

Reconstitution and use (general suggestions; not item-specific specifications):

  • Allow the container to equilibrate to room temperature before opening to avoid condensation.
  • Dissolve in anhydrous organic solvents commonly used for PEG linkers (e.g., DMF, DMSO, MeCN, DCM, THF). Item-specific solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • Prepare reaction solutions freshly. For longer holds, store aliquots at -20 °C in dry solvent under inert gas.

Freeze–thaw guidance:

  • Minimize freeze–thaw cycles by aliquoting upon first opening. Warm gently (≤40 °C) if increased fluidity is needed for transfer; avoid prolonged heating.

Shelf life and specifications:

  • Not specified for this item; refer to CoA/Spec Sheet for retest/expiry and any stabilizers or inhibitors if present.

Research Use Note: For research use only.

Structure and Identity

Short description: MS-PEG5-THP is a heterobifunctional polyethylene glycol (PEG) linker, typically featuring a mesylate (methanesulfonate, “MS”) electrophile and a tetrahydropyranyl (THP) protected alcohol as a latent nucleophile/handle. This makes it useful for stepwise PEGylation and spacer installation in synthetic and bioconjugation workflows.

Item-specific identifiers (from Product Data):

  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.

General structural features (literature/typical for “PEG5” MS–PEG–THP linkers):

  • PEG segment: approximately five ethylene glycol repeats [–(CH2–CH2–O)–]5 providing hydrophilicity and a ~22–25 Å spacer length (literature approximation).
  • Electrophilic terminus: a mesylate (–OSO2CH3) commonly used as a leaving group for SN2 substitution by O-, N-, or S-nucleophiles.
  • Protected terminus: a THP ether (–O–THP) masking a primary alcohol; can be deprotected under mild acid to reveal –OH.
  • 2D description: A linear oligo(ethylene glycol) chain capped on one end with –O–SO2CH3 and on the other with –O–(tetrahydropyran ring). No stereocenters expected in the backbone; THP ring is saturated and typically racemic when formed.

Note: Exact substitution pattern, end-cap orientation, and any additional stabilizers are not specified for this item and should be confirmed on the CoA/Spec Sheet.

Synthetic Utility

Functional group strategy (literature/typical for MS–PEGx–THP):

  • Electrophilic installation: The mesylate terminus is a strong leaving group enabling SN2 attachment of the PEG spacer to nucleophilic substrates (R–Nu). Applicable to O-, N-, and S-alkylation when steric and basicity constraints are managed.
  • Latent hydroxyl: The THP-protected end unveils a primary alcohol after mild acidic deprotection, furnishing a handle for downstream derivatizations (carbonates, carbamates, esters, activation to sulfonates or halides, or oxidation to aldehydes for oxime/hydrazone ligations).
  • Modularity: PEG5 provides a defined, mid-length hydrophilic spacer that can tune solubility and spacing in probes and materials without excessive chain entanglement.

Named/related transformations:

  • Williamson ether synthesis (O-alkylation) using mesylate electrophiles.
  • N-alkylation of amines to give secondary/tertiary amines under controlled conditions.
  • S-alkylation of thiols/thiolates to give thioethers—often high yielding and fast.
  • THP deprotection via acid-catalyzed acetal cleavage (PPTS, CSA), orthogonal to many base-mediated steps.

Retrosynthetic planning tips:

  • Decide which end to engage first based on substrate stability: typically substitute the mesylate under dry, neutral-to-basic conditions before acid-mediated THP removal.
  • If elimination is a concern, lower temperature and polar aprotic solvents can favor SN2.
  • For subsequent alcohol activation, consider CDI or p-NPC to access carbonate-activated intermediates for coupling to amines (carbamates).
Target Specificity

Not applicable. This product is a small-molecule PEG linker, not a biological targeting reagent (e.g., antibody, ligand with defined receptor specificity). No antigen, epitope, species reactivity, clone, or isotype information applies.

If you derivatize MS-PEG5-THP to install a targeting headgroup (e.g., peptide, small-molecule ligand), the specificity will be determined by that headgroup and its presentation, not by the PEG spacer itself.

Frequently Asked Questions

How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is M1445599, the molecular formula is C16H32O9S, and the molecular weight is 400.48 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.