GRADE & PURITYBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Item-specific
A validated, kit-specific protocol is not provided in the Product Data. Follow the official instructions supplied with the kit. The outline below is general guidance (literature) for micro-scale phospholipid assays.
General protocol (literature/guidance)
Preparation
Equilibrate all reagents to room temperature if required by the method. Pre-warm hydrolysis reagents if specified. Prepare a fresh standard curve (phosphate or phospholipid standard) spanning the expected range.
Sample handling
For lipid extracts, dry completely to remove organic solvents, then reconstitute in the recommended buffer. If using dispersants, keep concentrations minimal and consistent.
Hydrolysis
Combine sample/standard with hydrolysis reagent in microplate wells or tubes. Incubate at the prescribed temperature and time to quantitatively liberate phosphate. Cool if required before the next step.
Color development
Add color reagent to each well/tube. Incubate for the prescribed time until color stabilizes. Protect from light if indicated.
Measurement
Read absorbance at the specified wavelength using a microplate reader. Apply pathlength correction if your instrument supports it.
Calculations and QC
Subtract reagent blank, construct the calibration curve, and quantify sample phospholipid content. Include matrix controls and replicate measurements to assess precision.
Notes
Exact volumes, timings, and wavelengths are method-specific and not specified for this item.
Biological Roles
Item-specific
The kit measures total phospholipid content; no biological activity is attributed to the kit itself.
General information (literature)
Phospholipids are essential amphipathic components of cellular membranes, forming bilayers and contributing to membrane curvature, fluidity, and microdomain organization.
Major classes include phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylserine (PS), phosphatidylinositol (PI), cardiolipin (CL), and plasmalogens. Headgroup composition influences membrane charge and protein interactions.
Biosynthesis: cytidine diphosphate–diacylglycerol (CDP-DAG) and Kennedy pathways are central routes; remodeling occurs via Lands’ cycle. Turnover rates and acyl chain remodeling respond to metabolic state and stress.
Functional implications in research:
Lipid trafficking, vesicle formation, and organelle identity (e.g., PI derivatives in signaling).
Apoptotic signaling markers (e.g., externalization of PS) are monitored indirectly; total phospholipid assays provide complementary quantitative baselines for normalization.
Analytical context: Total phospholipid quantitation supports normalization of enzyme activities (e.g., phospholipases), benchmarking of liposome/LNP formulations, and assessment of sample integrity during extraction.
Note: This section provides biochemical background only; the kit is intended strictly for research use.
Buffer Applications
Item-specific
Buffer compositions included with this kit are not specified; refer to the CoA/Spec Sheet. No dedicated buffering system is claimed in the Product Data.
General guidance (literature/practice)
For phospholipid content assays based on phosphate detection:
Avoid phosphate-containing buffers (e.g., PBS) during the color development step to prevent background elevation.
Favor non-phosphate buffers such as Tris, HEPES, or acetate at modest ionic strengths (e.g., 10–50 mM), after validating no interference with the specific color reagent.
Sample preparation notes:
If samples are extracted in organic solvents, evaporate and reconstitute in a compatible aqueous buffer recommended by the method.
Chelators (e.g., EDTA) and high salt may affect certain colorimetric systems; include these only if validated.
pH considerations:
Hydrolysis and color development steps often occur under strongly acidic conditions; do not attempt to buffer these stages unless instructed by the kit protocol. Instead, ensure precise timing and temperature control to maintain reproducibility.
Green Alternatives
Item-specific
As an assay kit, green chemistry considerations relate to sample preparation and waste management rather than a single solvent choice. Specific reagent compositions are not specified for this item.
General guidance (literature and best practice)
Reduce hazardous solvents during lipid extraction:
Replace chloroform-based systems with less hazardous options when validated (e.g., methyl tert-butyl ether [MTBE]-based biphasic extraction). Verify compatibility with the assay chemistry.
Minimize waste:
Employ microplate formats to cut reagent volumes; aggregate similar waste streams for proper disposal.
Safer reagents:
Prefer colorimetric chemistries that avoid heavy metals where possible. If molybdate/vanadate systems are used, collect waste as hazardous and follow local regulations.
Energy and packaging:
Store at 2–8 °C (as specified) in energy-efficient refrigerators; consolidate orders to reduce cold-chain shipments.
Comparison (typical trade-offs; literature)
Chloroform–methanol extraction: high recovery of phospholipids but uses a Class 1 solvent (chloroform); disposal and exposure risks are higher.
MTBE-based extraction: improved safety profile and easier phase separation; may alter recovery for certain lipid classes and requires method re-validation.
Pharmaceutical Uses
Item-specific
No pharmacopeial status, excipient role, or manufacturing claim is provided for this item. The product is labeled For research use only.
General context (literature)
In pharmaceutical R&D, total phospholipid assays are used analytically to characterize lipid-based delivery systems (e.g., liposomes, LNPs) and to support formulation development, stability studies, and process monitoring.
Typical roles:
Batch-to-batch comparison of phospholipid content in excipient blends and finished lipid carriers.
Normalization of bioassays or enzymatic activities to lipid content in complex matrices.
Compliance note:
For QC release or cGMP use, method qualification/validation is required (accuracy, precision, range, robustness). This catalog item provides no such claim; users must perform their own validation under applicable quality systems.
Physical Properties
Item-specific (from Product Data)
Physical properties (BP, MP, density, refractive index, pKa, logP, solubility) are not specified for this item; refer to CoA/Spec Sheet. As a kit with multiple liquid reagents and standards, single-compound properties do not apply.
General information (literature)
Assay readout: typically colorimetric in the visible range (common methods read at ~650–830 nm depending on chemistry; literature). The exact wavelength for this item is not specified; refer to the kit insert/SDS.
Working range: Micro-method kits are generally optimized for low sample volumes (e.g., 10–100 µL reaction volume) and low-to-mid µg phospholipid quantities (literature). Exact range and LOD/LOQ are not specified for this item.
Sample compatibility (typical): aqueous buffers, biological extracts, liposome formulations, organic extracts subsequently dried and reconstituted in assay buffer (literature). Specific solvent tolerances and surfactant limits are not specified for this item.
Instrumentation: standard microplate reader or cuvette spectrophotometer (visible range). Exact instrument settings are kit-dependent and not specified here.
Quality and Grades
Item-specific (from Product Data)
Grade: BioReagent.
Purity specifications for individual components: Not specified for this item; refer to CoA/Spec Sheet.
Interpretation (general guidance)
BioReagent grade indicates reagents suitable for biological research workflows, emphasizing low background and consistency for biochemical assays. For assay kits, this typically encompasses:
Pre-validated color development chemistry with reproducible kinetics.
Standards/controls calibrated for linear response in the stated micro-scale format.
Lot-to-lot consistency enabling comparable absorbance responses at given phosphate levels.
Stabilizers/preservatives: Not specified for this item. Some kits include preservatives (e.g., low-level biocides) to maintain reagent integrity; consult the CoA/Spec Sheet if compatibility with sensitive samples (e.g., enzymes, cells) is a concern.
Documentation: For quantitative work, retain the lot-specific calibration certificate or standard value assignment. Record instrument wavelengths and pathlength correction settings to support traceability.
Reaction and Applications
Item-specific (from Product Data)
Manufacturer applications: Not specified for this item.
General applications (literature)
Quantification of total phospholipids in:
Liposome and lipid nanoparticle (LNP) formulations for characterization and process monitoring.
Membrane preparations, vesicles, exosomes, and lipid extracts from tissues or cells.
QA/QC of synthetic phospholipids or natural extracts during purification and storage studies.
Assay principle (typical): chemical hydrolysis liberates phosphate from phospholipids; inorganic phosphate reacts with a chromogenic reagent (e.g., ammonium molybdate/ascorbate or vanadate–molybdate systems) to produce a colored complex measurable at a defined wavelength (literature). Micro-method formats minimize sample and reagent volumes while maintaining sensitivity.
Practical tips (general):
Calibrate with an appropriate standard curve, ideally using a phospholipid standard processed through the same hydrolysis steps, or a certified phosphate standard with correction factors as required by the method.
Thoroughly dry organic extracts to remove residual solvents; use glassware free of phosphate contamination.
Run reagent blanks and matrix-matched controls to assess interference from buffers, salts, or surfactants.
Use consistent incubation times and temperatures to ensure linearity of color development.
Reaction Conditions
Item-specific
Specific incubation times, temperatures, wavelengths, and reagent volumes are not specified for this item; refer to the kit insert/CoA.
General guidance (literature)
Hydrolysis step: Often performed under acidic conditions with controlled heating to cleave phosphoester bonds and release inorganic phosphate from phospholipids.
Color development: Molybdate- or vanadate-based assays commonly develop color within 5–30 minutes at room temperature to ~37 °C, with absorbance measured in the visible range (exact λ depends on chemistry; e.g., ~620–830 nm). Timing must be consistent across standards and samples.
Calibration: Prepare a multi-point standard curve (e.g., 6–8 levels) within the expected sample range. Include reagent blanks and quality controls.
Matrix effects: Validate tolerance for surfactants, salts, residual solvents, and high-protein matrices. If interference is observed, adjust sample cleanup (e.g., re-extraction, dilution) or choose matrix-matched standards.
Linearity and precision: Verify linearity over the working range and evaluate intra-/inter-assay CVs under your lab’s conditions. These performance characteristics are method- and instrument-dependent.
Safety and Handling
Item-specific (from Product Data)
Storage conditions: Store at 2–8 °C, protected from light.
Shipped on: Wet ice.
GHS/Signal word/H-statements/Pictograms: Not specified for this item; refer to SDS and CoA/Spec Sheet.
General safety guidance (literature/practice)
Assay kits for phospholipids may include acidic or oxidizing components for lipid hydrolysis and color development. Handle all reagents in a fume hood, avoid skin/eye contact, and prevent inhalation of vapors or mists.
Personal protective equipment: lab coat, safety glasses or face shield, and appropriate chemical-resistant gloves (e.g., nitrile). Consider splash protection when handling concentrated acids.
Incompatibilities: keep oxidizers separate from organic solvents and combustibles; avoid mixing acids with bases; segregate cyanide- or azide-containing wastes from acids (general chemical hygiene).
First aid (overview; defer to the SDS for authoritative instructions):
Skin/eye contact: immediately flush with water for ≥15 minutes; remove contaminated clothing; seek medical attention.
Inhalation: move to fresh air; seek medical attention if symptoms occur.
Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
Spill/accident response: contain and neutralize acids/oxidizers as appropriate using compatible absorbents; dispose of waste per institutional and regulatory guidelines.
Solvent Selection
Item-specific
Not a single solvent; this is a multi-reagent assay kit. Specific solvent composition and tolerances are not specified for this item; refer to the kit insert/CoA.
General guidance (literature)
Sample preparation for phospholipid assays often involves:
Organic extraction (e.g., chloroform–methanol or Bligh–Dyer/Folch systems) followed by solvent evaporation and resuspension in assay buffer.
Use of mild, non-ionic detergents at low concentrations when assisting dispersion of lipids; high surfactant levels can interfere with colorimetric reactions (method-dependent).
Compatibility considerations:
Residual organic solvents (e.g., chloroform, methanol, isopropanol) may inhibit color formation or alter background; evaporate completely before assay (literature best practice).
High phosphate buffers (e.g., PBS) can artificially elevate background in phosphate-detection chemistries; prefer non-phosphate buffers (e.g., Tris, HEPES) unless validated.
Instrumentation: micro-well plates (clear, polystyrene) or glass/plastic cuvettes; ensure material compatibility with any acidic/oxidizing solutions used by the kit.
Storage and Reconstitution
Item-specific (from Product Data)
Storage: Store at 2–8 °C, protected from light.
Shipping: Supplied on wet ice.
Appearance and component list: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/practice)
Keep reagents tightly sealed to prevent evaporation and contamination. Protect chromogenic reagents from light; use amber vials or foil wrap as needed.
If any components are supplied as concentrates or lyophilized powders, reconstitute with the recommended solvent/buffer and mix gently to avoid foaming. Record the reconstitution date. For working solutions, prepare fresh on the day of use unless stability is documented.
Avoid repeated freeze–thaw of standards; aliquot upon first opening if long-term use is anticipated and stability permits at 2–8 °C or frozen storage (only if authorized by the kit insert).
Inspect reagents before use; do not use if precipitation, discoloration, or microbial growth is observed unless the insert acknowledges such characteristics as normal.
Stability/expiry: Follow the lot-specific expiration date. Do not expose to elevated temperatures or direct light during handling to maintain assay performance.
CAS, CID, InChIKey, SMILES: Not applicable to a multi-component kit; not specified for this item; refer to CoA/Spec Sheet.
General information (literature/kit context)
This is a multi-reagent kit designed to quantify total phospholipids in biological or synthetic samples. Typical kits comprise a digestion/acid hydrolysis reagent and a color-forming system that reacts with phosphate (e.g., molybdate-based) after phospholipid cleavage, measured spectrophotometrically.
No single molecular formula or molecular weight applies; the kit contains multiple solutions/buffers and possibly a phosphate standard.
Structural features relevant to the assay: phospholipids are amphiphilic molecules containing a glycerol backbone, two fatty acyl chains, and a phosphate-containing headgroup (e.g., choline, ethanolamine, serine). The assay typically converts the phosphate moiety to an inorganic phosphate derivative yielding a colored complex.
2D description of analytes (phospholipids): hydrophobic diacyl tail region linked via glycerol to a polar phosphate headgroup; the assay targets the phosphate functionality rather than acyl chain composition.
Synthetic Utility
This section is not typically applicable to an assay kit. The product is intended for analytical quantification of phospholipids rather than as a reagent for chemical synthesis. For work involving phospholipid synthesis or modification, refer instead to building-block listings (fatty acids, glycerol derivatives, activated phosphates) and use this kit post-synthesis to quantify total phospholipid content.
Target Specificity
Item-specific
Not an antibody or affinity reagent. No antigen/epitope, species reactivity, clone, or isotype applies.
General scope (literature)
The assay is generally responsive to total phospholipid phosphate content across classes (e.g., PC, PE, PS, PI, CL), measuring released inorganic phosphate after hydrolysis. Sensitivity to individual classes may vary slightly depending on hydrolysis efficiency; validate recovery with representative standards.
Frequently Asked Questions
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at 2–8 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Need help choosing the grade?
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.