Progesterone- 13 C 2 is the 13 C-labeled Progesterone. Progesterone is a steroid hormone that regulates the menstrual cycle and is crucial for pregnancy.
Specifications
Specifications & Purity
≥99%
Storage
Store at 2-8°C
Shipped In
Wet ice
This product requires cold chain shipping. Ground and other economy services are not available.
Purity
≥99%
Names and Identifiers
Molecular Weight
316.45
Advanced Data
Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
No tested application protocols are provided for this item. The following are general, literature-based handling suggestions for small, hydrophobic steroidal compounds used in research contexts (not validated for this SKU):
Stock preparation:
Dissolve in anhydrous DMSO (e.g., 10–50 mM) or ethanol (5–20 mM). Filter through 0.22 μm PTFE if particulate is present. Aliquot to minimize freeze–thaw.
Cell-based assays:
Dilute stock into culture medium to a final DMSO/EtOH content typically ≤0.1% v/v. Include vehicle controls. Pre-warm to 37 °C and mix thoroughly to mitigate precipitation.
Biochemical binding assays:
Use assay buffer with 0.01–0.1% nonionic surfactant or 0.1–1% BSA to reduce nonspecific adsorption. Validate equilibrium times and avoid plastic adsorption by using low-bind consumables.
Analytical calibration (if used as reference):
Prepare serial dilutions in MeCN or MeOH with 0.1% formic acid for LC–MS. Confirm linearity and stability over the run.
These are general practices only. Develop and validate protocols specific to your application and confirm suitability with the CoA/Spec Sheet for this lot.
Biological Roles
No biological/biochemical properties are specified for this exact catalog item. The following context summarizes literature-known roles of progesterone-class steroids and should not be construed as item-specific performance claims or clinical use.
Endogenous function (literature): Progesterone is a key steroid hormone in mammals, acting via nuclear progesterone receptors (PR-A/PR-B) to modulate gene expression. It also engages membrane-associated receptors leading to rapid signaling cascades.
Biosynthesis (literature): Derived from cholesterol through pregnenolone by 3β-HSD/Δ5-Δ4 isomerase; serves as a precursor to corticosteroids and androgens/estrogens via tissue-specific enzymatic pathways.
Binding and transport (literature): Circulates bound to serum albumin and corticosteroid-binding globulin; intracellular concentration is regulated by local synthesis and metabolism (e.g., 20α-HSD, cytochrome P450s).
Research relevance: Serves as a probe or control in receptor-binding assays, transcriptional reporter systems, and studies of steroidogenic enzymes.
Important: “Progesterone‑C” may represent a derivative, conjugate, or labeled analog whose receptor interactions and cellular permeability can deviate substantially from native progesterone. Users should confirm the intended biological mechanism and potency using the item’s CoA and primary literature before deploying in biological experiments. For research use only.
Buffer Applications
This product is a hydrophobic small molecule and is not itself a buffering agent. Therefore, classical buffer system guidance (e.g., phosphate, HEPES, Tris) is not directly applicable.
Practical notes for handling in buffered systems (general literature best practices):
Prepare concentrated stock solutions in DMSO or ethanol, then dilute into the target buffer with vigorous mixing; maintain final organic solvent typically ≤0.1–1% v/v to limit vehicle effects.
Use surfactants (e.g., 0.01–0.1% Tween-80) or serum-containing media where appropriate to minimize precipitation and adsorption to plastics.
Verify stability in the presence of buffer components (amines, reducing agents) that could form adducts with enone/ketone groups.
For precise compatibility (pH stability, precipitation limits) of this SKU, consult the CoA/Spec Sheet and perform a small-scale solubility/stability check in the intended buffer.
Green Alternatives
Greener handling focuses on solvent and reagent choices, as the steroid core itself is fixed. The following are literature-based recommendations (not item-specific requirements):
Prefer greener solvents where feasible:
Replace DCM with ethyl acetate or 2-methyltetrahydrofuran (2-MeTHF) for extractions and some reactions.
Replace hexane with heptane or cyclopentyl methyl ether (CPME) for chromatography and workups.
Use ethanol or isopropanol (bio-based where possible) as co-solvents instead of MeOH/ACN when compatible with assay chemistry.
Aqueous/biobased media:
Employ aqueous micellar catalysis (TPGS-750-M systems) for certain conjugate additions or reductions when compatible with the substrate.
Oxidants/reductants:
Favor milder, selective conditions (e.g., catalytic hydrogenation with reusable catalysts, or TEMPO/O2 for alcohol oxidations on derivatives) to minimize hazardous waste.
Comparison snapshot (literature-based):
DCM vs EtOAc: EtOAc has lower toxicity and better biodegradability; however, DCM may offer superior solubility for some steroid derivatives and gives sharper chromatographic separations.
THF vs 2-MeTHF: 2-MeTHF is bio-derived and forms fewer peroxides; water partitioning and boiling point differ, which may alter reaction rates and workups.
Always pilot greener substitutions on small scale to confirm solubility, selectivity, and crystallization behavior with the specific Progesterone‑C lot.
Pharmaceutical Uses
No pharmacopeial status, excipient role, or formulation grade is specified for this catalog item. It is supplied for research use only.
General formulation context for progesterone-class molecules (literature; not item-specific and not a therapeutic claim):
Solubilization approaches: lipid-based vehicles, cyclodextrin inclusion complexes, or ethanol/propylene glycol co-solvent systems are commonly used to improve solubility of hydrophobic steroids in research formulations.
Solid-state considerations: polymorphism and solvate formation can influence dissolution and stability; DSC/XRPD are standard tools when developing research formulations.
Analytical quality: quantitative methods typically involve HPLC/UV or LC–MS with stability-indicating gradients to monitor degradation (e.g., isomerization, oxidation).
Important: This product is not intended for human or veterinary use, diagnostic procedures, or as an active pharmaceutical ingredient. Any discussion here is provided solely to inform laboratory formulation experiments and analytical method development under research conditions.
Solubility tendencies: very low in water; soluble in alcohols, acetone, DMSO, DMF, chlorinated and aromatic solvents (literature).
logP (octanol/water) for progesterone: ~3.9 (literature).
Experimental handling notes (general, not item-specific specifications):
Steroidal ketones are generally crystalline solids with limited aqueous solubility; they dissolve readily in polar aprotic organics (DMSO/DMF) and moderately in lower alcohols.
For analytical work (HPLC/LC-MS), DMSO stocks (e.g., 10–50 mM) are commonly prepared, then diluted into organic/aqueous mobile phases with attention to precipitation risk.
Always verify exact physical property targets, purity, and acceptance criteria from the item’s CoA or specification sheet before use in quantitative work.
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpretation and implications:
Without an explicit grade (e.g., ≥98%, analytical, HPLC, BioXtra), end-users should consult the CoA for assay method (HPLC/GC/LC–MS), purity basis (area % vs. weight %), and limits for residual solvents, moisture, and inorganic contaminants.
For ligand-binding assays, receptor pharmacology, or high-sensitivity analytics, high-purity material with low UV background and minimal stabilizers is preferred. Confirm stabilizers/additives, if any, on the CoA (none are specified here).
If the material is supplied as a library compound, lot-to-lot traceability (batch number, synthesis route, analytical spectra) is critical. Request NMR, LC–MS, and chromatograms if not included in the CoA.
Notes on stabilizers and additives:
Stabilizer presence/absence: Not specified for this item; refer to CoA/Spec Sheet.
Water/peroxide/metal limits, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
Recommended user QC (good practice):
Verify identity by LC–MS (expected [M+H]+ consistent with structure provided on CoA), and purity by HPLC with orthogonal methods if needed.
Document storage conditions upon receipt and record any deviations from cold-chain requirements (this item ships on wet ice; store 2–8 °C).
Reaction and Applications
Manufacturer application text: Not provided for this item.
General research uses for progesterone-class small molecules (literature context; not item-specific claims):
Chemical biology: tool compound for studying nuclear hormone receptor (PR) binding, co-regulator recruitment, and transcriptional modulation in cell-based or biochemical assays.
Analytical reference: calibration or positive control in receptor-binding or LC–MS workflows (where structure is appropriate), subject to verification of identity/purity.
Conjugation chemistry: derivatization at the 3- or 20-keto positions (oximes, hydrazones, semicarbazones) for generating haptens, affinity probes, or labeled tracers.
Reaction families applicable to a progesterone-like enone dione scaffold (literature):
Nucleophilic additions to the 20-ketone; 1,4-conjugate (Michael) additions to the Δ4–3‑keto enone.
Selective reductions (e.g., 20‑ketone to alcohol using NaBH4/CeCl3, Luche conditions) while preserving the enone.
Formation of oximes/hydrazones at C3/C20 using hydroxylamine or hydrazine derivatives (useful for immobilization or detection).
Halogenation/epoxidation of the Δ4-enone (e.g., peracids for epoxides), followed by regioselective opening.
Practical tips:
Maintain anhydrous and oxygen-controlled conditions for sensitive transformations; protect from strong acids/bases that cause isomerization.
Use TLC/UPLC with UV (200–254 nm) and evaporative light scattering as needed for non-UV-strong derivatives.
Confirm that the specific structure of Progesterone‑C supports the intended chemistry before applying these methods.
Reaction Conditions
No item-specific reaction conditions are provided. The following literature-informed guidelines apply broadly to progesterone-like enone diones; confirm compatibility with Progesterone‑C’s exact structure.
Reductions:
Selective 20‑ketone reduction: NaBH4 (0.5–1.5 eq) in MeOH/THF at 0–25 °C, 0.5–2 h; Luche conditions (CeCl3·7H2O, 1–2 eq) improve 1,2‑selectivity.
Global hydrogenation of the Δ4‑enone: H2 (1–3 atm) with Pd/C (5–10 wt%) in EtOH/EtOAc at RT–50 °C; monitor for over-reduction.
Oxime/hydrazone formation:
Hydroxylamine hydrochloride (2–5 eq) with pyridine or AcONa buffer in EtOH/MeOH, RT–50 °C, 2–16 h; analogous conditions for hydrazine/semicarbazide.
Michael additions/epoxidation:
Soft nucleophiles (e.g., thiols) under base catalysis (Et3N, DBU) in MeCN/THF at 0–25 °C; peracid epoxidation (mCPBA, 0.9–1.2 eq) in DCM at 0–10 °C, 0.5–2 h.
Workup/purification:
Avoid strong base/acid during quench to limit isomerization; use buffered aqueous washes and silica pre-treated with 1–2% Et3N for base-sensitive derivatives.
Ensure rigorous characterization (NMR, LC–MS, HRMS) after each step due to potential isomerization or minor diastereomer formation.
Safety and Handling
Item-specific GHS data: Not specified for this item; refer to SDS for authoritative safety information.
Signal word: Not specified for this item; refer to SDS.
Hazard statements (H-phrases): Not specified for this item; refer to SDS.
GHS classification and pictograms: Not specified for this item; refer to SDS.
General safety considerations for progesterone-class small molecules (literature/precautionary context):
May exhibit endocrine activity; avoid inhalation, ingestion, skin contact. Handle in a chemical fume hood.
PPE: lab coat, nitrile gloves (change regularly), safety glasses or face shield. Use dedicated tools to prevent cross-contamination.
Hygiene: wash thoroughly after handling; avoid generating dust/aerosols; prevent contamination of work surfaces and instruments.
Storage incompatibilities: keep away from strong oxidizers and strong acids/bases that could degrade enone/ketone functionalities.
Environmental: prevent release to drains; collect solid/solution waste in properly labeled organic waste streams per institutional policy.
First-aid overview (consult SDS):
Inhalation: move to fresh air; seek medical advice if symptoms persist.
Skin/eye contact: rinse with water for at least 15 minutes; remove contaminated clothing; seek medical attention if irritation persists.
Ingestion: rinse mouth; do not induce vomiting unless directed by medical personnel; seek medical attention.
Always defer to the product-specific SDS for definitive hazard classification, exposure controls, and emergency procedures.
Solvent Selection
Item-specific solubility is not provided. The following guidance reflects general behavior of progesterone-like steroids (literature context; verify with this item’s CoA/specs):
Polarity class: nonpolar to moderately lipophilic neutral ketone (enone), typically favoring organic media.
Poor: water and aqueous buffers without co-solvent.
Practical approaches:
Prepare concentrated DMSO or ethanol stock solutions (e.g., 10–50 mM) and dilute into assay buffers maintaining final organic content (often 0.1–1% v/v) to avoid precipitation.
For synthetic transformations, use dry polar aprotic solvents (THF, DCM, MeCN, dioxane, toluene) compatible with enone/ketone chemistry.
Comparison notes (literature-based):
DMSO vs ethanol: DMSO generally affords higher solubility and stability in freezer aliquots; ethanol is often preferred for biological compatibility at low final percentages.
MeCN vs THF/DCM for chromatography: MeCN/H2O mobile phases are LC-friendly; DCM/hexane/EtOAc systems are common for flash chromatography of steroids.
Important: Because “Progesterone‑C” may differ structurally from progesterone, verify solvent compatibility and maximum achievable concentration experimentally for this SKU.
Storage and Reconstitution
Item-specific directives:
Storage Conditions: Store at 2–8 °C (per Product Data).
Shipped In: Wet ice (per Product Data).
Additional best practices for hydrophobic small molecules (general guidance):
Protect from light and moisture. Store in tightly sealed, chemically compatible containers; purge with inert gas if long-term storage is anticipated.
If supplied as a solid, desiccate upon receipt and allow to equilibrate to room temperature in a desiccator before opening to prevent condensation.
If supplied in solution, verify solvent composition and concentration on the CoA; maintain cold chain and avoid repeated freeze–thaw.
Reconstitution (if solid; verify with CoA):
Use anhydrous DMSO or ethanol to prepare a concentrated stock (e.g., 10–50 mM). Vortex and, if needed, sonicate briefly to ensure complete dissolution. Filter through 0.22 μm PTFE if clarity is required.
Prepare single-use aliquots and store at 2–8 °C for short term or at −20 °C for extended periods, subject to compound stability. Record preparation date and conditions.
Deviations from these practices should be justified by the item-specific specifications on the CoA/Spec Sheet. For research use only.
Structure and Identity
Brief overview: Progesterone-C is listed in our small-molecule/compound library category. Structural identifiers for this exact catalog item are not provided in the Product Data.
Item-specific identifiers (this SKU):
CAS: 82938-07-6
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general literature context for progesterone-class steroids; not item-specific):
Typical functional groups for progesterone: a 3-keto-4-ene (enone) in ring A and a 20-ketone in the side chain.
Stereochemistry: multiple defined stereocenters at ring junctions and substituents (e.g., 8β, 9α, 10β, 13β, 14α in the canonical steroid framework).
Common 2D depiction: fused three six-membered rings (A–C) and one five-membered D ring, with a 17-acetyl side chain and a Δ4-double bond.
Important note: The exact substitution pattern, labeling, or conjugation underlying the designation “Progesterone‑C” is not specified here. Please consult the Certificate of Analysis (CoA) or specification sheet for definitive structure, stereochemistry, and analytical identifiers of this SKU.
Synthetic Utility
With a progesterone-like core (literature context), a compound of this class offers a versatile platform for selective functionalization and probe construction. Verify the exact structure of Progesterone‑C before applying the strategies below.
Key functional handles (literature):
C3 enone (Δ4‑3‑keto): amenable to Michael additions, oxime/hydrazone formation, selective epoxidation, and photochemical cycloadditions.
C20 ketone: nucleophilic additions, reductive transformations to 20‑alcohol, and derivatization to oximes/semicarbazones.
Allylic positions: potential for allylic oxidation or halogenation to access further diversity.
Named/typical transformations:
Luche reduction (NaBH4/CeCl3) for 20‑ketone chemoselective reduction.
Oppenauer oxidation on appropriate alcohol derivatives to regenerate ketones selectively.
Oxime ligation for conjugation to carriers (e.g., linkers, resins) enabling affinity reagents or immunogens.
Cross-coupling from prefunctionalized steroid derivatives (e.g., via enol triflates) to append reporter groups.
Retrosynthetic value:
Acts as a chiral, densely functionalized scaffold; late-stage diversification enables SAR studies in receptor-binding research.
Analytical considerations:
1H/13C NMR shows characteristic enone resonances (δ 5–6 ppm for vinylic H) and ketone carbons (~200–210 ppm) in the parent; MS typically shows a strong molecular ion/adduct for intact framework.
Always align route selection with the verified structure and protecting-group needs specific to this SKU.
Target Specificity
Not applicable. This product is a small molecule from a compound library, not an antibody or protein reagent. No target specificity attributes (antigen, clonality, isotype, species reactivity) are provided or applicable to this SKU.
If using in receptor-binding assays (e.g., progesterone receptor), confirm ligand identity, affinity, and selectivity from the item’s CoA and primary literature pertinent to the exact structure of Progesterone‑C.
Frequently Asked Questions
What is the purity of this product?
This product is supplied at ≥99% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 82938-07-6, the molecular formula is C1913C2H30O2, and the molecular weight is 316.45 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.