Tefluthrin-d 5 is the deuterium labeled Tefluthrin.
Specifications
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
This product requires cold chain shipping. Ground and other economy services are not available.
Names and Identifiers
Molecular Weight
423.76
Advanced Data
Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Isotope-dilution LC-MS/MS (general example)
Prepare a primary stock of Tefluthrin-d in acetonitrile (e.g., 1 mg/mL). Serially dilute to working solutions (e.g., 10 µg/mL, 100 ng/mL). Store stocks at −20 °C in amber glass.
Spike a fixed volume of IS into all samples, calibration standards, and QCs prior to extraction (typical final IS level: 1–50 ng/mL in extract; optimize per method).
Extract matrix (e.g., QuEChERS for produce, SPE for water). Perform cleanup as required. Analyze by LC-MS/MS monitoring MRM pairs for tefluthrin and Tefluthrin-d.
Quantify using the analyte/IS peak area ratio versus a matrix-matched calibration curve.
GC-MS (general example)
Prepare IS in isooctane. Spike prior to extraction. Analyze on a low-bleed GC column with selected ion monitoring for analyte/IS ion clusters.
Quality control
Include method blanks, matrix spikes, duplicate samples, and continuous calibration verification. Evaluate surrogate and IS recoveries to accept/reject batches.
Note: The above are general guidelines. Item-specific protocols, concentrations, and transitions are not specified for this item; consult your method SOP and validate in your laboratory.
Biological Roles
Item focus
Tefluthrin-d is an isotopically labeled analytical standard; it is not intended to probe biological function directly. No biological activity data are provided for this item.
General context (literature, for tefluthrin/pyrethroids)
Pyrethroids act on insect voltage-gated sodium channels, altering gating kinetics and causing neuroexcitation. They are widely used in agriculture and public health pest control.
In mammalian systems, pyrethroids can interact with neuronal ion channels at higher exposures; however, the present product is for laboratory research/analytical use only, not for in vivo applications.
Research applications
Used to quantify tefluthrin in biological matrices (e.g., serum, urine, tissue extracts) for exposure assessment studies, toxicokinetic research, and in vitro metabolism assays, employing isotope-dilution MS.
Facilitates mass-balance studies by distinguishing spiked analyte from endogenous/background residues.
Note
Any specific bioactivity, binding constants, or ADME parameters for this deuterated material are not specified for this item; consult primary literature for the unlabeled compound where needed.
Buffer Applications
Not typically applicable. Tefluthrin-d is a hydrophobic, non-ionic organic analyte standard and is not used to prepare aqueous buffer systems or to control pH.
Practical note
If introduced into aqueous phases for LC-MS/MS, it is carried by organic co-solvents (e.g., acetonitrile, methanol). Aqueous buffers used in LC (e.g., ammonium formate/acetate, 2–10 mM) are selected based on the chromatographic method rather than properties of this analyte.
Green Alternatives
Context
While the analyte itself (tefluthrin) is not replaceable in targeted analysis, greener choices often exist for the solvents and sample-prep steps used with Tefluthrin-d.
Greener solvent options (general guidance)
Replace dichloromethane with ethyl acetate for liquid–liquid extraction where feasible.
Use ethanol or ethyl acetate in place of hexane/isooctane for some cleanup steps, acknowledging potential changes in recoveries and selectivity.
Prefer acetonitrile over acetonitrile/dichloromethane blends; consider water-acetonitrile mixes to reduce solvent use.
Dichloromethane: strong eluent, fast evaporation; halogenated waste burden. Alternative: ethyl acetate or MTBE (with caution, peroxides), validated for recovery.
Acetonitrile: widely used in QuEChERS; acceptable green profile relative to chlorinated solvents; maintain water content to improve safety and reduce VOCs.
Trade-offs
Method performance (recoveries, matrix effects, partitioning) can shift with greener solvents. Validate changes with matrix spikes and CCV/QC samples.
Item-specific green attributes: Not specified for this item; refer to CoA/Spec Sheet.
Pharmaceutical Uses
This product is supplied strictly for research use only. No pharmacopeial monographs or excipient roles are specified for this item.
Relevant laboratory uses (general)
May be employed as an internal standard in analytical method development and validation (e.g., ICH Q2) for residue testing or exposure studies; however, it is not intended for human or veterinary formulation, clinical, or diagnostic use.
Item-specific regulatory status and grade: Not specified for this item; refer to CoA/Spec Sheet.
Physical Properties
Item-specific data (this product)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Purity/grade: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet (varies with deuterium incorporation).
Storage and shipping (from Product Data)
Storage: Store at −20 °C.
Shipping: Ice chest + ice pads.
General/literature guidance for tefluthrin (unlabeled)
Physical state: hydrophobic oily liquid or low-melting solid depending on formulation; very low water solubility; high solubility in nonpolar and moderately polar organic solvents (e.g., hexane, toluene, acetone, acetonitrile) — literature/general.
Volatility: lower than light hydrocarbons but can partition into headspace at room temperature — literature/general.
LogP: high (typical of pyrethroids; strong nonpolarity) — literature/general.
Deuteration minimally perturbs retention time vs unlabeled tefluthrin; exact RT shift depends on D positions (usually small). Vapor pressure and solubility are essentially comparable to the unlabeled compound. All item-specific numeric values: Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Typical expectations for isotope-labeled analytical standards (general)
Identity confirmation by high-resolution MS and/or NMR; isotopic enrichment reported as atom % D and labeling pattern; residual unlabeled analyte often controlled.
Purity expressed as chemical purity (by GC/LC) and isotopic purity (by MS). Low levels of volatile/non-volatile impurities reduce background in trace analysis.
What to look for on the CoA (practical guidance)
Exact deuteration pattern and enrichment.
Assay/impurity profile and residual solvents.
Recommended solvent for initial dissolution and stability guidance (light, temperature).
Intended use statement (research/analytical only) and storage instructions.
Stabilizers
If stabilizers are present in some lots of pyrethroids, they can affect MS baselines; this item’s stabilizer status: Not specified for this item; refer to CoA/Spec Sheet.
Fit-for-purpose notes (general)
For quantitative LC-MS/MS or GC-MS, isotope-labeled internal standards should co-elute with the native analyte and exhibit minimal H/D exchange; verify with a matrix-matched check standard prior to routine use.
Reaction and Applications
Primary application (this labeled compound)
Designed for use as an internal standard or surrogate in quantitative analysis of tefluthrin by GC-MS or LC-MS/MS. Enables isotope-dilution quantification to correct for extraction losses, matrix effects, and instrument variability.
Typical workflows (general)
Environmental monitoring: spike Tefluthrin-d into water, soil, sediment, air sampler extracts prior to extraction/cleanup; quantify native tefluthrin via analyte/IS response ratio.
Food/feed residue testing: add before QuEChERS or SPE cleanup; follow matrix-matched calibration.
Fate/degradation studies: track transformation pathways; the D-label facilitates distinguishing dosed compound from background contamination.
Practical tips
Add internal standard early in the workflow (prior to any extraction) at a fixed mass or concentration to all samples, calibrators, and QC materials.
Verify co-elution and absence of deuterium exchange under your chromatographic and sample-prep conditions.
Monitor one or more characteristic MRM/HRMS transitions for both analyte and IS with sufficient mass spacing to avoid cross-talk.
Synthetic chemistry note
This deuterated pyrethroid is not typically used as a building block or reagent; it is supplied for analytical and tracing applications in research laboratories.
Reaction Conditions
Not a reagent for synthetic transformations; however, the following general conditions pertain to analytical workflows using Tefluthrin-d.
GC-MS (general guidance)
Injection solvent: isooctane or hexane; splitless or pulsed splitless injection at 250–280 °C (per instrument limits). Column: low-bleed 5% phenyl polysiloxane or equivalent. Oven programs tailored to separate pyrethroids (e.g., 70→320 °C ramp). Monitor characteristic ions for analyte/IS.
LC-MS/MS (general guidance)
Mobile phase: water with 0–10 mM ammonium formate/acetate and acetonitrile or methanol. Gradient elution to 80–95% organic. ESI or APCI typically in positive mode for many pyrethroids; evaluate both sources for sensitivity. Use MRM transitions separated by the deuterium mass shift.
Sample preparation
QuEChERS for food matrices; SPE/NVC for water; hexane/acetone extraction for soils/sediments. Spike IS before extraction.
Stability checks
Assess carryover and adsorption by running solvent blanks and post-extraction spikes. Verify absence of H/D exchange under method conditions.
Expected performance
Calibration linearity typically across low ng/L to µg/L (or ng/g) levels with isotope dilution; exact ranges and recoveries are matrix/method dependent (literature/general). Item-specific performance data: Not specified for this item; refer to CoA/Spec Sheet.
Safety and Handling
Authoritative source: Always consult the SDS for Tefluthrin-d before use. Item-specific GHS classification, hazard statements (H-phrases), and pictograms: Not specified for this item; refer to CoA/Spec Sheet/SDS.
General hazards (literature/general for pyrethroids)
Pyrethroids can cause skin paresthesia and eye irritation; avoid dermal/ocular contact and inhalation of aerosols/vapors.
Environmental hazard: highly toxic to aquatic organisms; prevent release to the environment and collect all waste appropriately.
Recommended PPE and controls
Wear lab coat, nitrile gloves, and splash-resistant safety glasses; use in a fume hood, especially when preparing volatile standards or evaporating solvents.
Avoid generating dust/aerosols; use sealed autosampler vials and crimp caps for standards.
Incompatibilities and stability (general)
Avoid strong oxidizers, strong bases/acids at elevated temperature, and prolonged UV exposure; store in amber containers where possible.
Adsorption losses may occur on plastics; use glassware for stock solutions and sample storage.
First-aid overview (general)
Skin: Wash with soap and water; remove contaminated clothing.
Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do.
Inhalation: Move to fresh air; seek medical attention if symptoms persist.
Ingestion: Rinse mouth; seek medical advice. Provide SDS to responders.
Solvent Selection
Polarity and solubility (general/literature for tefluthrin)
Highly hydrophobic; readily soluble in nonpolar to moderately polar organics such as hexane, isooctane, toluene, dichloromethane, ethyl acetate, acetone, and acetonitrile. Practically insoluble in water.
Recommended solvents for standards (practical guidance)
GC methods: prepare stock in isooctane or hexane to minimize adsorption and ensure injector compatibility.
LC-MS/MS methods: acetonitrile or methanol stocks, with final diluent matched to starting mobile phase (e.g., 50:50 ACN:water with 0.1% formic acid if appropriate for the method).
Handling tips
Use amber glass vials; avoid plastic syringes where adsorption losses can occur. Pre-rinse syringes and autosampler vials with a small aliquot of the standard solution.
For low-ppb work, include 0.1–1% DMSO or isopropanol as a carrier to reduce wall losses (verify compatibility with your detection system).
When to choose alternatives
If method requires greener media, ethyl acetate or ethanol can substitute for halogenated solvents; confirm stability and recovery for your matrix.
Note: Item-specific solvent specifications are not provided; refer to CoA/Spec Sheet for any lot-specific recommendations.
Storage and Reconstitution
Storage (from Product Data)
Store at −20 °C. Shipments are made in an ice chest with ice pads to maintain the cold chain.
General handling
Keep tightly closed in amber glass vials under inert headspace (e.g., nitrogen or argon) to minimize oxidation and photolysis. Allow to equilibrate to room temperature before opening to avoid condensation.
Minimize freeze–thaw cycles by preparing single-use aliquots of stock solutions.
Reconstitution and stock preparation (general)
Dissolve in high-purity acetonitrile, methanol, hexane, or isooctane depending on the analytical platform. Typical primary stock: 0.1–1 mg/mL. Filter not required; avoid plastic consumables to reduce adsorption.
For LC use, prepare working solutions in acetonitrile or methanol; for GC use, prepare in isooctane/hexane. Match final diluent to starting mobile phase for best peak shape.
Stability notes
Protect from light and heat; verify stability by periodic comparison of response factors versus freshly prepared standards. Monitor for any evidence of deuterium exchange under aqueous or acidic/basic conditions.
Item-specific shelf life and solution stability: Not specified for this item; refer to CoA/Spec Sheet.
Structure and Identity
Item-specific identifiers
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Naming and class
Product name: Tefluthrin-d (stable-isotope–labeled analogue of tefluthrin; the exact sites/extent of deuteration are not specified for this item).
Compound type: Deuterated pyrethroid insecticide standard (research/analytical use).
Structural features (general, literature)
Tefluthrin is a fluorinated synthetic pyrethroid composed of a cyclopropanecarboxylate linked to a highly fluorinated aryl/alkenyl alcohol fragment; it is structurally related to other Type I pyrethroids (no cyano group) bearing multiple F and CF3 substituents.
Deuterated forms replace one or more non-exchangeable hydrogens with deuterium to provide a mass shift for isotope-dilution MS without altering chromatographic behavior significantly.
2D description (general)
Ester functionality connecting a substituted cyclopropane carboxylate to a fluorinated benzyl/allylic alcohol moiety; multiple C–F and CF3 groups increase hydrophobicity and persistence. Stereocenters at the cyclopropane ring are typical of pyrethroids; exact stereochemistry and D-labeling pattern for this item: Not specified for this item; refer to CoA/Spec Sheet.
Synthetic Utility
Role in synthesis
Deuterated tefluthrin is not typically used as a synthetic intermediate due to its complexity and cost; it functions primarily as an analytical internal standard.
Potential research utility (general)
Mechanistic/environmental fate studies: the D-label enables tracing partitioning, adsorption/desorption, and degradation pathways in soils and sediments.
Metabolism and transformation studies: track biotic/abiotic conversion while differentiating from background contamination.
Pyrethroids comprise a substituted cyclopropanecarboxylate ester and a substituted benzyl/allylic alcohol motif. Stereochemical control at the cyclopropane and selective introduction of fluorinated groups are key steps; deuteration may be incorporated via labeled alcohol precursors or exchange-resistant positions. These are literature/general notes and not a specification of this item’s route.
Target Specificity
Not applicable. This product is a small-molecule analytical standard, not an antibody, enzyme, or ligand directed at a biomolecular target. No clone/isotype/epitope data are relevant.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.