YM Broth Medium - BioReagent

Cat. No.: Y1528396
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Size
Germany (EU)
USA*
Price
Qty
250g
Y1528396-250g
Made to order · 8–12 wks
€95.36
Enter a quantity for the sizes you want to add.

Overview

For the cultivation of Saccharomyces carlsbergensis

Specifications

Specifications & Purity
BioReagent
Storage
Room temperature
Shipped In
Normal
Grade
BioReagent
Product Line
biological_products

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Reviews

Customer Reviews

Application Protocols

General, literature‑based protocols for YM Broth Medium (not item‑specific; validate locally):

  • Preparation of YM Broth (1 L):

    1. Add approximately 21 g of dehydrated medium to ~900 mL of purified water.
    2. Heat gently with stirring to dissolve completely; avoid boiling.
    3. Adjust pH if required (literature typical ~6.2). Bring volume to 1 L with water and mix.
    4. Dispense into suitable bottles or flasks with loose caps. Autoclave at 121 °C for 15 min. Cool to room temperature; tighten caps.
  • Yeast inoculation and growth (shake‑flask):

    1. Inoculate sterile YM Broth (e.g., 50–100 mL in a 250–500 mL baffled flask) with a fresh colony or an overnight culture to an initial OD600 of 0.05–0.1.
    2. Incubate at 30 °C, 200–250 rpm. Monitor OD600 every 2–3 h. Subculture or harvest in mid‑log phase (OD600 ~0.6–1.0), as appropriate.
  • Mold cultivation (broth):

    1. Inoculate with spores or mycelial fragments under aseptic conditions.
    2. Incubate 22–28 °C with gentle shaking or stationary, depending on desired morphology. Harvest by filtration; wash with cold buffer/water.
  • Supplementation:

    • Add antibiotics, inducers, or trace components after sterilization via sterile filtration (0.22 μm). Record final concentrations.
  • Quality checks:

    • Include uninoculated sterility controls; inspect for turbidity after incubation.
    • For optical assays, pre‑filter the medium before sterilization to reduce background haze.

Note: For this specific item, detailed preparation instructions are Not specified; refer to CoA/Spec Sheet.

Biological Roles

YM Broth Medium supplies essential nutrients required for fungal and yeast proliferation (literature/general):

  • Carbon and energy: Readily metabolizable sugars (e.g., dextrose) and malt‑derived oligosaccharides support glycolysis, fermentation, and respiration.
  • Nitrogen: Peptones provide peptides, amino acids, and ammonium upon metabolism, fueling protein synthesis and nitrogen assimilation pathways.
  • Vitamins and growth factors: Yeast extract contributes B‑vitamins (e.g., niacin, riboflavin), nucleotides, and cofactor precursors important for central metabolism and redox balance.
  • Minerals and buffering capacity: Extracts supply trace minerals and phosphates that assist enzyme function; the medium exhibits weak intrinsic buffering, typically near mildly acidic pH optimal for many fungi.
  • Physiological effects:
    • Encourages robust biomass formation and, for Saccharomyces, fermentative metabolism at higher sugar concentrations.
    • For filamentous fungi, nutrient richness can influence morphology (pellets vs dispersed mycelia) depending on agitation and inoculum density.
  • Application contexts:
    • Non‑selective recovery medium for stressed or environmentally isolated yeasts/molds.
    • Baseline growth medium before transitioning to selective, differential, or production media tailored to the organism and target phenotype.

Note: Specific micronutrient levels and exact composition are not specified for this item; consult the CoA/Spec Sheet when nutrient sensitivities or trace analyte backgrounds are critical.

Buffer Applications

YM Broth Medium is not a defined buffering system and is not typically used to prepare analytical buffers.

  • pH behavior: The medium exhibits mild intrinsic buffering due to phosphates, amino acids, and organic acids present in complex components, but the capacity is limited and composition‑dependent (literature/general).
  • Practical guidance: If precise pH control is required for experiments, prepare YM Broth at the desired pH and verify after sterilization, or supplement with a defined buffering system (e.g., 50 mM phosphate or citrate) compatible with the organism under study.

For dedicated buffer preparation, use defined buffer reagents rather than complex nutrient media.

Green Alternatives

YM Broth Medium is inherently water‑based and free of volatile organic solvents, aligning with several green chemistry principles (safer solvents and auxiliaries, energy efficiency via moderate prep temperatures). Considerations and options (literature/general):

  • Environmental footprint:
    • Water as solvent minimizes VOC emissions and flammability hazards.
    • Dehydrated format reduces transport mass and packaging versus ready‑to‑use liquids.
  • Energy and sterilization:
    • Autoclaving consumes energy; for small volumes, sterile filtration and gamma‑sterile water can reduce steam usage, though filter waste increases solid waste.
  • Alternatives and tradeoffs:
    • Defined minimal media: Lower lot‑to‑lot variability and reduced organic load in effluent; however, they may require more resources to formulate and often yield slower growth.
    • Plant‑based peptones/yeast‑free formulations: Avoid animal‑derived components; may alter growth performance and metabolite background.
  • Waste minimization:
    • Prepare only required volumes; store unused dehydrated medium sealed and desiccated to extend usability.
    • Segregate uncontaminated medium (non‑biohazard) from biologically contaminated waste to enable appropriate disposal pathways.

Summary comparison (general):

  • YM Broth: Rapid growth, complex organics, higher COD in waste.
  • Defined medium: Slower growth, lower organic burden, improved analytical background. Selection depends on experimental priorities.
Pharmaceutical Uses

For research and industrial laboratory use only. No clinical or therapeutic claims.

Relevant non‑clinical uses (literature/general):

  • Microbiological quality control: Cultivation and recovery of yeast/mold indicators in environmental monitoring and utilities testing (e.g., compressed air, cleanroom surface swabs) when paired with appropriate neutralizers and sampling protocols.
  • Growth promotion testing: As a positive control medium in QC to verify the suitability of test methods or neutralizing agents for fungal organisms.
  • Upstream process development: Preparation of seed cultures/inocula of recombinant or production yeasts prior to transfer into defined or fed‑batch media.
  • Raw material bioburden checks: Enrichment of low‑level fungal contaminants from non‑sterile samples prior to plating on selective agar.

Regulatory note: Pharmacopeial monographs exist for some media; however, exact compliance status, composition, and growth promotion acceptance criteria for this specific item are Not specified for this item; refer to CoA/Spec Sheet. Users operating under GMP should qualify the medium per internal SOPs and applicable pharmacopeial guidance.

Physical Properties

Item-specific numeric specifications are not provided in the Product Data for this complex medium.

  • Physical state/appearance: Not specified for this item; refer to CoA/Spec Sheet. (General: dehydrated, free‑flowing powder.)
  • Solubility: Freely soluble in water (general property of dehydrated media components); insoluble in most organic solvents (literature, general).
  • pH of prepared medium: Not specified for this item; refer to CoA/Spec Sheet. (Literature, typical YM broth pH: ~6.2 at 25 °C before sterilization.)
  • Osmolality/ionic strength: Not specified for this item; refer to CoA/Spec Sheet. (Varies with exact formulation.)
  • Density, refractive index, melting/boiling point, vapor pressure: Not applicable/Not specified for this mixture in dehydrated form; prepared solution is aqueous and inherits water’s bulk properties.

Practical notes (literature/general):

  • Reconstitution is typically rapid with gentle heating and agitation; avoid overheating to prevent caramelization of carbohydrates.
  • Prepared broth is clear to slightly opalescent, light amber, depending on composition and water quality.
  • Filtration may reduce haze due to high‑molecular components; autoclaving may darken the medium slightly (Maillard reactions).
Quality and Grades
  • Supplied grade: BioReagent (per Product Data). This denotes suitability for general laboratory and life‑science workflows, including microbiology, cell‑free assays, and routine QC, with controls on bioburden and common contaminants appropriate for research use.
  • Research use only: For research and laboratory use; not for human or animal diagnostic, therapeutic, or clinical applications.
  • What BioReagent grade implies (general):
    • Manufactured for reproducibility and consistent nutrient performance.
    • Typical controls include lot‑to‑lot consistency in growth promotion (e.g., support for representative yeast/mold strains), microbial limits of the dehydrated powder, and moisture content. The exact acceptance criteria are manufacturer‑specific.
  • Not specified for this item; refer to CoA/Spec Sheet:
    • Exact composition and per‑liter concentration.
    • Growth promotion test organisms and results.
    • Moisture content and ash.
    • pH of prepared medium and color standard.
  • Practical guidance:
    • For sensitive applications (e.g., downstream metabolomics or trace metal studies), review the CoA/Spec Sheet for potential background contributions from peptides, carbohydrates, and trace metals inherent to complex media.
    • If ultra‑low background is required, consider defined minimal media as a process control or comparator.
Reaction and Applications

As a life‑science culture medium, YM Broth Medium is not used as a chemical reagent but as a nutrient system for microbial growth. Key laboratory applications (literature/general):

  • Cultivation and maintenance of yeasts and molds, including Saccharomyces, Candida, Pichia, Kluyveromyces, and filamentous fungi (e.g., Aspergillus, Penicillium) for routine propagation and experimentation.
  • Pre‑culture/inoculum development for fermentation, expression of recombinant proteins in yeast, and screening of transformants prior to selective media transfer.
  • Enumeration and quality monitoring: recovery and counting of environmental or process‑related yeasts/molds in food, beverage, and bioprocess labs when used with appropriate plating methods.
  • Physiological studies: carbon utilization, stress response, and metabolite profiling under non‑selective, nutrient‑rich conditions.
  • Teaching laboratories: demonstration of fungal growth kinetics, aeration effects, and turbidity measurements.

Practical considerations:

  • Aeration strongly influences growth; use baffled flasks or orbital shaking (200–250 rpm) for aerobic yeasts. For filamentous fungi, lower agitation minimizes pellet fragmentation.
  • For selective workflows, YM Broth can be supplemented with antibiotics, dyes, or pH adjustments post‑sterilization (sterile technique required).
  • Monitor growth by OD600 for yeasts (linear range depends on spectrophotometer pathlength); for molds, dry weight or colony‑forming units may be more appropriate than turbidity due to mycelial clumping.
Reaction Conditions

As a culture medium, “reaction conditions” correspond to preparation and incubation parameters for microbial growth. The following are general, literature‑based guidelines (not item‑specific):

  • Reconstitution (typical): Dissolve the dehydrated medium at approximately 21 g per liter of purified water. Heat gently with stirring until fully dissolved. Adjust volume to final and mix thoroughly.
  • pH: Literature typical initial pH ~6.2 at 25 °C; adjust as required for specific organisms (e.g., pH 5.0–6.5 for many yeasts; molds may tolerate broader ranges). Verify pH after sterilization.
  • Sterilization: Autoclave at 121 °C for 15 minutes (15 psi). For heat‑labile supplements (antibiotics, vitamins), filter sterilize the supplement and add aseptically after cooling to 45–50 °C.
  • Incubation (organism‑dependent):
    • Yeasts (e.g., Saccharomyces, Pichia): 25–30 °C, shaking 180–250 rpm for aeration; typical growth to mid‑log in 8–16 h depending on strain and inoculum.
    • Molds/filamentous fungi: 22–30 °C; agitation gentle to moderate to control morphology; time frames 24–72 h or longer.
  • Monitoring:
    • Yeasts: OD600 for turbidity (ensure readings within linear range; dilute as necessary).
    • Molds: Dry cell weight, microscopy, or plating for CFU due to mycelial clumping.

Note: Exact concentration, pH, and performance parameters for this catalog item are Not specified for this item; refer to CoA/Spec Sheet and validate under your conditions.

Safety and Handling
  • GHS classification, signal word, pictograms, H‑statements: Not specified for this item; refer to SDS for authoritative safety information.
  • General hazards (literature/general for dehydrated media): Nuisance dust may cause mechanical irritation to eyes, skin, or respiratory tract; low acute toxicity expected. Not flammable as an aqueous solution; dehydrated powder contains organic matter and should be kept away from ignition sources and moisture.
  • PPE: Wear lab coat, safety glasses, and suitable disposable gloves. Use a dust mask/respirator if airborne dusts are generated (per institutional risk assessment).
  • Handling: Avoid generating dust; handle in a clean area to prevent contamination. When preparing sterile media, use good microbiological practices to avoid exposure to hot liquids and pressurized steam.
  • Incompatibilities: Strong oxidizers may degrade organic components. Avoid contact with strong acids/bases that can hydrolyze or caramelize medium constituents.
  • First aid (overview; defer to SDS):
    • Inhalation: Move to fresh air; seek medical advice if symptoms persist.
    • Skin contact: Wash with soap and water.
    • Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy; seek medical attention if irritation persists.
    • Ingestion: Rinse mouth; seek medical advice if unwell.
  • Sterilization hazards: Use caution when autoclaving; vent caps to prevent vessel rupture. Allow bottles to cool before tightening caps. Avoid superheating and boil‑overs.
  • Waste: Dispose according to local regulations for nonhazardous organic laboratory waste and for biohazardous waste if used/contaminated with microorganisms.
Solvent Selection

This product is a dehydrated microbiological medium designed to be reconstituted in purified water.

  • Primary solvent: Water (Type 1/Type 2 DI or equivalent microbiological‑grade water). Avoid tap water due to chlorine, metals, and variable hardness.
  • Polarity/miscibility: Fully water‑soluble; components dissolve to form a homogeneous aqueous broth (literature/general).
  • Sterilization choices:
    • Autoclaving (121 °C, 15 min) is standard for bulk preparation.
    • Sterile filtration (0.22 μm) is possible for heat‑labile supplements added post‑sterilization; complete filtration of the base medium is feasible but may be slow due to colloids.
  • When to choose YM Broth vs alternatives:
    • YM Broth: Broad support for yeasts/molds; moderate carbohydrate load; mildly acidic pH (literature typical ~6.2).
    • YPD Broth: Richer for Saccharomyces with higher yeast extract/peptone and glucose; may accelerate fermentative growth.
    • Sabouraud Dextrose Broth: More acidic and higher dextrose; selective for fungi over bacteria.
  • Practical tips:
    • Warm water (40–50 °C) speeds dissolution; avoid boiling to minimize sugar degradation.
    • Adjust final volume after dissolution to maintain target concentration.
    • If optical assays are planned, pre‑filter to reduce haze and background absorbance.
Storage and Reconstitution
  • Storage (dehydrated powder): Room temperature (per Product Data). Keep tightly closed in a cool, dry place. Protect from moisture and sources of contamination. If available, store with desiccant. Shelf life and moisture specifications: Not specified for this item; refer to CoA/Spec Sheet.
  • Shipping: Shipped under normal conditions (per Product Data).
  • Reconstitution (general, literature): Dissolve approximately 21 g of YM Broth powder in 1 L of purified water with gentle heating and stirring. Adjust pH if required (literature typical ~6.2). Sterilize by autoclaving at 121 °C for 15 minutes. Allow to cool before use. For heat‑labile supplements, sterile‑filter and add aseptically after cooling to 45–50 °C.
  • Storage (prepared medium): Store at 2–8 °C in tightly closed containers. Use within 1–2 weeks for best performance (general guidance; actual stability depends on sterility and storage conditions). Avoid repeated warming/cooling cycles.
  • Freeze–thaw: Not recommended for prepared broth due to potential precipitation and component degradation.
  • Thawing/temperatures before use: Warm refrigerated broth to room temperature or desired incubation temperature; mix to re‑homogenize before inoculation.

Always consult the product’s CoA/Spec Sheet and SDS for item‑specific instructions and safety information. Research use only.

Structure and Identity

YM Broth Medium (often called Yeast Malt Broth) is a dehydrated, multi‑component nutrient blend for cultivating yeasts and molds. As a complex mixture derived from biological and enzymatic digests, it does not have a single defined molecular structure.

  • Item identity: Complex microbiological growth medium (broth), dehydrated powder for reconstitution in water.
  • Mixture status: Contains multiple organic and inorganic constituents; exact composition of this catalog item is not specified here.
  • Molecular formula: Not applicable to mixtures; Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not applicable to mixtures; Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES / InChI / InChIKey: Not applicable to complex mixtures; not assigned.
  • Structural features (descriptive): Typically includes peptides/amino acids (from peptone), carbohydrates (e.g., dextrose, malt extract saccharides), vitamins and growth factors (from yeast extract), and trace minerals. Functional groups present across the mixture include amides/peptides, polyhydroxylated carbohydrates, organic acids, and salts (literature, general description).
  • 2D structure description: Not defined for complex media; components are heterogeneous, polydisperse biomolecules and small molecules.

Literature note (general, not item-specific): A common YM broth formulation per liter is yeast extract, malt extract, peptone, and dextrose totaling ~21 g/L, yielding a mildly acidic medium suitable for a broad range of yeasts and molds.

Synthetic Utility

Not a chemical building block or reagent. YM Broth Medium has no direct role in synthetic organic, organometallic, or polymer chemistry.

  • Context (general): It serves as a biological matrix enabling microbial transformations. If biocatalysis using yeasts or fungi is contemplated, YM Broth can be used to cultivate the catalyst organism prior to employing defined reaction media tailored to the biotransformation.
  • Recommendation: For chemical synthesis workflows, refer to solvent selection and reagent tabs relevant to your reaction class. For biocatalysis, consult organism‑specific literature for media that balance growth, enzyme expression, and product formation.
Target Specificity

Not applicable. This product is a non‑selective, complex growth medium and is not an antibody, probe, or affinity reagent. No antigen/epitope specificity, clone, isotype, or species reactivity applies.

Frequently Asked Questions

How should this product be stored?
Store at room temperature.

Need help choosing the grade?

Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.

View BioReagent grade guide →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.