QUALITÉ & PURETÉBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
General preparation and use (literature protocol; adjust to your SOP and product label):
A. Medium preparation
Weigh dehydrated medium per label (typical literature value ~50 g/L; confirm for this item).
Add to purified water with stirring; heat to near boiling until fully dissolved. Do not overboil.
Adjust pH if required (literature target ~7.1 at 25 °C) using sterile acid/base.
Dispense into suitable bottles with vented closures. Autoclave at 121 °C for ~15 min.
After sterilization, cool to 45–50 °C in a water bath, mix gently to redistribute indicator, and pour 20–25 mL per 90 mm plate. Allow to solidify and dry surface condensation under aseptic conditions.
B. Inoculation and incubation
Streak or spread sample onto the plate using sterile technique. If performing enumeration, use appropriate dilutions.
Incubate inverted plates at 35–37 °C for 18–24 h (or per method).
C. Interpretation
Lactose fermenters: pink to red colonies; possible bile precipitate halo.
Non-lactose fermenters: colorless to pale colonies.
Record colony morphology, count CFU where applicable, and subculture isolates for confirmation.
Quality controls (suggested framework): Include positive (lactose-fermenting) and negative (non-fermenting) control strains. Verify sterility of uninoculated plates.
Note: Item-specific preparation parameters and acceptance criteria are Not specified for this item; refer to CoA/Spec Sheet.
Biological Roles
MacConkey Agar functions as a selective and differential environment for Gram-negative enteric bacteria (general/literature information):
Selectivity mechanism: Bile salts and crystal violet mimic intestinal bile conditions and inhibit most Gram-positive species by disrupting cell envelopes, allowing bile-tolerant Gram-negative rods to grow.
Differential mechanism: Lactose serves as a fermentable carbohydrate. Acid produced by lactose fermenters lowers local pH, protonating neutral red and yielding pink/red colonies. Non-fermenters do not acidify the medium and remain colorless/pale.
Indicator dynamics: Neutral red has a pKa in the physiologically relevant range; at lower pH it is red/pink, revealing acidogenic colonies. Excessive heat or light can degrade the dye, reducing contrast.
Colony morphology cues: Strong lactose fermenters (e.g., typical coliform-like organisms in research) often display pink colonies with precipitated bile halos; weak fermenters may be lighter pink. Non-fermenters form translucent colonies without halos.
Osmotic and nutritional support: Peptones provide amino acids, peptides, and growth factors; NaCl maintains osmotic balance to support typical enteric growth.
Scope and limitations:
Some Gram-positive or fastidious organisms may be inhibited or grow poorly.
Certain non-enteric Gram-negative bacteria may grow but not exhibit classic differential reactions.
Incubation temperature, atmosphere, and inoculum size influence selectivity and differentiation.
Note: Use with appropriate controls to interpret lactose fermentation reliably in your research context.
Buffer Applications
Not typically used as a buffer system. MacConkey Agar is a complete culture medium whose pH is adjusted during preparation; buffering capacity is modest and arises from the medium’s components. For defined buffering in biochemical assays, use dedicated buffers (e.g., phosphate, HEPES) prepared separately.
Green Alternatives
While culture media selection is primarily driven by microbiological performance, several sustainability considerations apply (general guidance):
Ready-to-use vs. in-house preparation: Pre-poured plates reduce on-site energy and water use from autoclaving but increase packaging and shipping mass. In-house preparation allows bulk procurement and reuse of glassware but consumes energy (autoclave) and water. Choose based on local utilities, waste management, and throughput.
Batch sizing: Prepare only the volume needed to minimize expired plates and waste. Smaller, more frequent batches can reduce discard.
Water quality: Use appropriately purified water; avoid over-specifying ultra-high purity grades to reduce pretreatment energy unless required by your SOP.
Energy-efficient sterilization: Load autoclaves efficiently and select validated minimum cycles (e.g., 121 °C, 15 min) rather than excessively long programs that fade indicators and consume more energy.
Material choices: Reuse heat-resistant glass media bottles where feasible. Opt for recyclable plate sleeves and minimize secondary packaging.
Alternatives for specific goals: For lactose-fermentation studies with fewer inhibitors, Endo or VRBA agars may be method-specified; however, changes must be justified by method performance and are not inherently “greener.”
Always align environmental choices with biosafety and data integrity requirements.
Pharmaceutical Uses
No therapeutic applications. The relevance in pharmaceutical settings is methodological (general, non-clinical information):
Microbiological quality control (R&D and non-clinical QC): MacConkey Agar is commonly used for selective isolation and differentiation of bile-tolerant Gram-negative organisms when assessing bioburden in raw materials, water systems, and environments, where permitted by internal SOPs and compendial methods.
Growth promotion testing (GPT): Pharmacopeial and ISO standards often require verification that each lot of medium supports growth of specified organisms and inhibits others appropriately. Typical test strains include a lactose-fermenting Enterobacteriaceae member and a non-lactose fermenter; exact strains and acceptance criteria depend on the governing method. Item-specific GPT status is Not specified for this item; refer to CoA/Spec Sheet.
Method verification/validation: When introducing or changing suppliers, laboratories typically verify performance characteristics (recovery, selectivity, differentiation) under their specific conditions (incubation time/temperature, inoculum levels).
Environmental monitoring programs: In facilities where Gram-negative detection/differentiation is needed, MacConkey plates can complement non-selective media to aid in preliminary characterization of isolates.
Documentation: For regulated workflows, retain lot CoA, GPT records (e.g., ISO 11133 compliance), and sterilization logs. Confirm any “ChP” alignment and release criteria on the supplier’s CoA before use in pharmacopeial methods.
Physical Properties
MacConkey Agar Medium is supplied as a dehydrated blend intended for dissolution in water and subsequent sterilization.
Item-specific properties:
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Storage conditions: Room temperature (per Product Data).
Shipping: Normal (per Product Data).
General/literature properties for MacConkey Agar (dehydrated medium):
Physical form: free-flowing powder with mixed particle size; color typically light beige to pink-tan prior to hydration.
Solubility: readily dispersible in purified water; complete dissolution requires heating to near boiling.
Typical working concentration: approximately 50 g/L (varies by formulation and supplier; confirm with label/CoA).
Typical prepared medium appearance: clear to slightly opalescent, pinkish-red gel after sterilization and cooling in plates.
Typical pH (at 25 °C) of prepared medium: ~7.1 ± 0.2 (literature; confirm with lot-specific CoA).
Gel strength: sufficient to form firm plates at 1.5–1.6% agar equivalents (literature).
Not applicable/Not defined for mixtures (use-specific rather than intrinsic):
Melting point/boiling point, density, refractive index, logP, pKa: Not applicable to the dehydrated blend; for the set medium, agar gel softens above ~45–50 °C (literature) and liquefies near 85–90 °C (literature). These are operational rather than specification values.
Always verify lot-specific parameters (color, pH range, fill mass) on the product label or CoA.
Quality and Grades
Grade: BioReagent (per Product Data). In the context of culture media, BioReagent indicates suitability for biological laboratory use, emphasizing consistency, low bioburden in the dehydrated powder, and performance characteristics appropriate for microbial cultivation.
Pharmacopoeial note: The “(ChP)” designation in the product name typically denotes alignment with the Chinese Pharmacopoeia description for MacConkey Agar. Item-specific compliance claims, test limits, and performance criteria (e.g., growth promotion testing) are Not specified for this item; refer to CoA/Spec Sheet.
What quality means for this medium (general information):
Performance characteristics (literature): Demonstrated selectivity against Gram-positive organisms and differential response of lactose fermenters vs. non-fermenters. Growth promotion testing (GPT) commonly includes representative strains (e.g., Escherichia coli as positive lactose-fermenting control and Salmonella spp. as non-fermenting control). Exact strains and acceptance criteria must be confirmed on the CoA.
Chemical composition control: Lots are blended to deliver consistent nutrient, salt, inhibitor, and indicator content. Color/pH of the prepared medium, gel strength, and sterility post-autoclave are routinely monitored.
Suitability for regulated work: For QC or method validation, consult the lot-specific CoA for GPT results, pH after sterilization, fill mass, and any pharmacopoeial references. If documentation such as ISO 11133-compliant GPT is required, verify availability prior to use.
Stabilizers/antimicrobials: None are typically added to dehydrated media beyond the formulation components; any item-specific additives are Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
Chemical reaction paradigms do not apply to this product. Instead, the relevant context is microbiological application.
Selective and differential plating of Gram-negative enteric bacteria from mixed samples (e.g., environmental, food, and industrial hygiene testing in research settings). Bile salts and crystal violet inhibit most Gram-positive organisms, enriching for Enterobacteriaceae and other bile-tolerant Gram-negative rods.
Lactose fermentation differentiation: Organisms fermenting lactose produce acid that turns the neutral red indicator pink/red; strong acid production may precipitate bile, forming hazy haloes. Non-lactose fermenters form colorless to pale colonies on a pink background.
Typical use cases: enumeration and isolation of coliform-like bacteria; verification/confirmation plates in microbiology workflows; teaching laboratories for selective plating principles; non-clinical R&D and quality monitoring.
Practical tips (general good practice):
Ensure proper concentration and pH (post-sterilization) to maintain selectivity and indicator performance. Overheating or prolonged autoclaving can fade neutral red and reduce selectivity.
Dry plates (lid ajar, sterile environment) before use to minimize surface moisture and colony spreading.
Incubation: 35–37 °C is commonly used; adjust according to organism requirements and method protocols.
Interpret colonies promptly (typically 18–24 h) to avoid pH reversion or overgrowth masking differential features.
Note: For regulated testing, follow the relevant compendial or standard method and confirm all performance criteria with the lot-specific CoA.
Reaction Conditions
Not applicable to chemical reactions. For microbiological preparation conditions (general guidance): dissolve the dehydrated medium in purified water at the label-indicated concentration, heat to fully dissolve, sterilize by autoclaving (121 °C, ~15 min), cool to 45–50 °C, and pour plates. Item-specific instructions, including concentration and target pH, are Not specified for this item; refer to CoA/Spec Sheet and the product label.
Safety and Handling
GHS/label information for this specific item: Not specified for this item; refer to the product SDS for authoritative classification.
General safety considerations for dehydrated culture media (literature/good practice):
Hazards: Powders may cause mechanical irritation to eyes, skin, and respiratory tract. Avoid creating dust. Some formulations contain dyes (e.g., crystal violet) that can stain and may cause irritation.
PPE: Wear lab coat, suitable gloves, and safety glasses. Use a dust mask or work in a fume hood if dust generation is unavoidable.
Handling: Open containers gently. Weigh in a clean, dry environment. Avoid contamination of the dehydrated medium to maintain performance.
Incompatibilities: Strong oxidizers and strong acids/bases may degrade organic components and indicator dyes. Avoid contact with reactive chemicals and moisture ingress during storage.
Preparation hazards: Boiling and autoclaving hot liquids present burn/scald risks; use heat-resistant gloves and proper vessels with vented closures. Do not tightly cap during autoclaving.
Microbiological risk: Once inoculated, all plates/broths become biohazardous. Handle under appropriate biosafety practices (e.g., BSL-1/2 as applicable to organism). Decontaminate spent media and cultures by autoclaving (121 °C, ≥15 min) or validated chemical disinfection prior to disposal per institutional and regulatory requirements.
First aid (overview; consult SDS): Inhalation—move to fresh air. Eye/skin contact—rinse with water. Ingestion—rinse mouth. Seek medical attention if irritation persists.
Always defer to the SDS and local EHS policies for definitive guidance.
Solvent Selection
Not applicable. This is a dehydrated microbiological medium intended to be dissolved in purified water to prepare agar plates. For preparation, use high-quality water (e.g., ASTM Type II/ISO 3696 Grade 2) to ensure optimal clarity, pH, and performance.
Storage and Reconstitution
Storage (per Product Data and general best practice):
Store the dehydrated medium at room temperature in a tightly closed container, protected from moisture, heat, and light. Avoid prolonged exposure to humidity, which can cause clumping and degrade performance.
Shipped at ambient conditions.
Reconstitution and sterilization (literature guidance; follow product label):
Typical working concentration is ~50 g/L in purified water; exact value for this SKU is Not specified for this item; refer to CoA/Spec Sheet.
Suspend the powder in cold water with stirring. Heat to dissolve completely; do not char.
Adjust pH as required (literature target for prepared medium ~7.1 at 25 °C).
Sterilize by autoclaving at 121 °C for approximately 15 min. Do not over-sterilize, as excessive heat can diminish indicator color and selectivity.
Cool to 45–50 °C before pouring plates. Avoid forming condensation by equilibrating plates before incubation.
Prepared plate storage (general):
Store poured plates in sealed sleeves or wrapped stacks at 2–8 °C, protected from light to preserve neutral red and crystal violet. Allow plates to reach room temperature and dry surface condensation before use.
Shelf life of prepared plates is method- and facility-dependent; verify with internal QC. Discard any plates showing contamination, dehydration (cracking), or color change.
Research use note: For research use only.
Structure and Identity
MacConkey Agar Medium (ChP) is a complex, dehydrated culture medium designed for the selective and differential cultivation of Gram-negative enteric bacteria. It is a formulated mixture rather than a single chemical substance.
Item identity (mixture): a composite microbiological medium containing nutrients, selective agents, indicators, and a solidifying agent.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
CAS, InChIKey, SMILES: Not applicable to mixtures; Not specified for this item; refer to CoA/Spec Sheet.
General composition (literature, typical for MacConkey Agar; exact composition for this SKU not specified):
Bile salts and crystal violet (inhibit Gram-positive organisms)
Neutral red (pH indicator for lactose fermentation)
Sodium chloride (osmotic balance)
Agar (gelling agent)
Structural/functional features (general knowledge):
Selective components (bile salts, crystal violet) suppress most Gram-positive flora.
Differential system uses lactose and neutral red to indicate acid production: lactose fermenters produce pink to red colonies (often with bile precipitate haloes); non-fermenters remain colorless to pale.
Agar provides a hydrated polysaccharide matrix forming firm plates at room temperature.
Note: As a formulated medium, the product lacks a single defined molecular structure; analytical identifiers (e.g., InChIKey) are inherently not applicable.
Synthetic Utility
Not applicable. MacConkey Agar is a formulated microbiological medium and is not used as a reagent in chemical synthesis or as a building block for organic transformations.
Target Specificity
Not applicable. This product is not an antibody or affinity reagent. It is a non-selective nutrient base with selective/differential properties for classes of microorganisms rather than a molecular target.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.