Phosphate Buffer (pH 7.2, Dehydrated) (ChP) - BioReagent

Cat. No.: P1528253
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Taille
USA
Allemagne (EU)*
Prix
Qté
250g
P1528253-250g
Sur commande · 8–12 semaines
59,90$US
Enter a quantity for the sizes you want to add.

Vue d’ensemble

For pharmaceutical dilution

Spécifications

Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateArticle
ZJ26F1039688ZJ26F1039688Certificate of AnalysisOct 09, 2026 P1528253
Calculateurs de solution
Avis

Avis des clients

Application Protocols

No manufacturer-validated protocols are provided in the Product Data. The following are general, literature-based examples for a pH 7.2 phosphate buffer; adapt to your application and refer to the item’s CoA/label for reconstitution specifics.

  • General reconstitution (conceptual): Dissolve the manufacturer-specified mass of dehydrated blend in high-purity water to the indicated final volume. Mix until fully dissolved. Verify pH at 20–25 °C; adjust minimally if permitted by your method.
  • Filter sterilization: Pass through a 0.22 µm PES or PVDF membrane into a sterile container for cell- or protein-facing uses. Label with concentration, pH, and date.
  • ELISA wash buffer (example): Prepare 1× phosphate buffer pH 7.2; add 0.05% Tween 20 (v/v). Use 3–5 washes between steps; validate detergent level for your assay.
  • Protein dilution/buffer exchange: Exchange into 10–50 mM phosphate, pH 7.2, by dialysis (3× buffer changes) or spin columns; confirm protein stability and activity.
  • Chromatography equilibration: Equilibrate IEX columns with 20–50 mM phosphate, pH 7.2, with defined conductivity; perform linear salt gradients as required.

Note: These are literature-style examples. Do not substitute for your internal SOPs. For this item, exact mass/volume instructions and acceptance criteria are Not specified; consult the product label/CoA.

Biological Roles

This product is a laboratory buffer; the following notes summarize the biological context of phosphate buffering (literature, general information).

  • Physiological relevance:
    • Inorganic phosphate (Pi) participates in fundamental biochemical processes, including ATP/ADP/Pi energy metabolism and phosphorylation/dephosphorylation equilibria.
    • Cytosolic pH in mammalian cells is near 7.2, matching the target pH of this buffer, which helps maintain protein structure and activity ex vivo for phosphate-tolerant systems.
  • Buffer chemistry:
    • The H2PO4−/HPO42− conjugate pair has pKa2 ≈ 7.21 at 25 °C, providing buffering centered at neutral pH with modest temperature dependence.
  • Interactions and limitations:
    • Phosphate can weakly coordinate metals and can precipitate with divalent cations (Ca2+, Mg2+), potentially perturbing metal-dependent biochemical pathways.
    • Certain enzymes are inhibited by phosphate or require metal ions that are sequestered/precipitated by phosphate; buffer choice should be validated empirically.
  • Applications derived from biological context:
    • Protein stabilization near physiological pH; sample handling and storage; immunoassay diluents/washes; nucleic acid workflows where amine buffers are undesirable.

Note: No clinical/therapeutic claims are made. This product is designated For research use only (from Product Data).

Buffer Applications

This dehydrated blend is intended to prepare a phosphate buffer at pH 7.2. Exact reconstitution mass and final volume for this item are Not specified; follow the label/CoA for item-specific instructions. The guidance below provides literature-based practices.

  • Working pH range (literature): Effective buffering ~5.8–8.0; optimal near 7.2 (pKa2 ≈ 7.21 at 25 °C).
  • Typical use concentrations (literature examples): 10–100 mM for general biochemistry; higher for chromatography as needed.
  • Example recipes (literature, not item-specific):
    • 0.1 M Sodium Phosphate, pH 7.20 (25 °C): • Na2HPO4 (anhydrous) 0.1 M and NaH2PO4 adjust ratio to reach pH 7.20; e.g., 61.5 mM Na2HPO4 + 38.5 mM NaH2PO4 per liter yields ~pH 7.2 (verify and fine-tune).
    • 10 mM Potassium Phosphate, pH 7.20: KH2PO4/HK2PO4 mixture adjusted to pH 7.2; verify at working temperature.
    • PBS variant (literature): Phosphate buffer plus ~137 mM NaCl and ~2.7 mM KCl (and 10 mM phosphate) at pH 7.4. For pH 7.2, adjust acid/base ratio accordingly. Note: This catalog item is phosphate buffer only; saline is not included unless stated on CoA.
  • Practical tips:
    • Temperature matters: pH drifts with temperature; calibrate pH meter at measurement temperature.
    • Sterility: Filter-sterilize (0.22 µm) for sensitive applications; store cold (2–8 °C) and use within 1–4 weeks, or prepare fresh.
    • Avoid precipitation: Do not mix with high Ca2+/Mg2+ without prior compatibility testing; visible haze indicates phosphate salt precipitation.
    • Conductivity/ionic strength: Document and control if used in chromatography or electrophoresis.

Always follow the specific reconstitution instructions and acceptance criteria on the product label/CoA for this item.

Green Alternatives

Phosphate buffer is already a relatively benign, inorganic, non-volatile aqueous buffer with good environmental profile. Nevertheless, buffer choice can impact sustainability and process performance.

  • Environmental perspective (literature):
    • Phosphate: inorganic, readily handled in wastewater treatment but can contribute to eutrophication; minimize discharges and follow local regulations.
    • Tris/Good’s buffers (HEPES, MOPS): organic, generally low toxicity but lower biodegradability and potentially higher persistence than phosphate; often higher cost.

Comparison (literature, general):

  • Phosphate (pH 7.2):
    • Pros: inexpensive, minimal UV absorbance, robust buffering near neutrality, widely available to pharmacopeial standards (e.g., ChP, USP) for related salts.
    • Cons: precipitates with Ca2+/Mg2+; can inhibit certain enzymes; contributes to phosphate load in effluents.
  • HEPES/MOPS:
    • Pros: minimal metal precipitation; stable pH across temperature; low interference with many enzymes.
    • Cons: higher cost; lower biodegradability; higher UV background in some analytics.
  • Tris:
    • Pros: strong buffer capacity, inexpensive.
    • Cons: primary amine can interfere with derivatizations and some enzyme reactions; higher temperature coefficient of pH.

Greener practice with phosphate buffer:

  • Prepare only the volume needed; store concentrates to reduce waste.
  • Reuse for compatible wash steps within validated limits.
  • Implement phosphate capture or dilution strategies in waste management to mitigate eutrophication risk.
Pharmaceutical Uses

This product is offered as BioReagent grade; it is intended for research and laboratory use. The “(ChP)” designation indicates relevance to Chinese Pharmacopoeia nomenclature. No therapeutic or clinical use is claimed.

  • Roles in formulation (literature, general):
    • Buffering agent to maintain pH ~7.2 in aqueous solutions, protein formulations, and diagnostics reagents.
    • Component of process buffers (e.g., chromatography equilibration, wash, and elution buffers) where phosphate is acceptable.
    • Vehicle in analytical sample preparation for stability and method robustness.
  • Regulatory context:
    • Many phosphate salts have pharmacopeial monographs (e.g., ChP/USP/EP). However, specific monograph compliance for this catalog item is Not specified; refer to CoA/Spec Sheet.
  • Practical considerations:
    • Low UV background is advantageous for UV-based analytics.
    • Risk of Ca2+/Mg2+ precipitation should be managed in parenteral-like test systems and process development studies (research only).
    • For MS-based assays, inorganic phosphate may suppress ionization; evaluate alternative buffers or volatile systems when needed.

Note: For research use only (from Product Data). Not for human or veterinary use.

Physical Properties

Item-specific specifications are not provided in the Product Data for this dehydrated blend.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight (of blend): Not applicable as a single value; refer to CoA/Spec Sheet.
  • Melting point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density (solid): Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Highly water-soluble (literature, typical for phosphate salts and phosphate buffer blends).
  • pH: Target pH 7.2 when reconstituted per manufacturer instructions (item-specific target from Product Name). Exact pH tolerance/spec is not provided; refer to CoA/Spec Sheet.
  • Buffering range (literature): Phosphate buffer effectively covers pH ~5.8–8.0 with optimal capacity near pKa2 ≈ 7.21 at 25 °C.
  • Ionic strength/osmolality: Not specified for this item; depends on reconstitution concentration and any added salts (refer to CoA/Spec Sheet).
  • Refractive index/viscosity (solution): Not typically specified for buffers; not provided.

General notes (literature):

  • Temperature dependence: Apparent pKa2 of phosphate decreases slightly with increasing temperature; solution pH may shift ~−0.002 to −0.003 pH units/°C around room temperature.
  • Compatibility: Phosphate readily dissolves in water; insoluble precipitates may form in the presence of high concentrations of Ca2+ or Mg2+ (e.g., Ca3(PO4)2), depending on ionic strength and pH.
Quality and Grades
  • Item-specific grade: BioReagent (from Product Data). This denotes suitability for common laboratory and biochemical workflows (buffer preparation, routine protein/nucleic acid procedures), but it is not a GMP or clinical grade. UV absorbance, microbial limits, metal content, and other analytical specifications are not provided here; consult the CoA/Spec Sheet.
  • Pharmacopoeial notation: “(ChP)” in the product name indicates alignment with Chinese Pharmacopoeia nomenclature/usage for phosphate buffer. However, exact monograph compliance details (e.g., assay tolerances, impurity limits) are Not specified for this item; refer to CoA/Spec Sheet.
  • Appearance, assay, pH after reconstitution, and bioburden/endotoxin (if controlled): Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/preservatives: None stated. Not specified for this item; refer to CoA/Spec Sheet.

Practical guidance for users:

  • If using in regulated workflows, verify acceptance criteria (pH, conductivity/ionic strength, bioburden) with your internal specifications and request a current CoA/Spec Sheet.
  • For optical applications (UV/LC), if low background absorbance is critical, verify UV cutoffs/absorbance of the prepared buffer per your method; item-specific low-UV specifications are not provided here.
  • Lot-to-lot control: Reconfirm pH after reconstitution at the target temperature (typically 20–25 °C), as phosphate pH is temperature dependent.
Reaction and Applications

This dehydrated phosphate buffer is primarily for preparing an aqueous buffer at pH 7.2. It is not a classical reagent for organic transformations, but it is widely used as the reaction medium or diluent in biochemical and analytical workflows.

  • Biochemical/analytical applications (literature):
    • Protein preparation: resuspension, dialysis, dilution, and storage when phosphate-compatible.
    • Enzyme assays near neutral pH for enzymes not inhibited by phosphate.
    • Immunoassays: wash buffers and sample diluents (often with added surfactant such as Tween 20; note this item is phosphate buffer only—additives not included unless specified on CoA).
    • Nucleic acids: gel electrophoresis running buffer variants (e.g., sodium phosphate) and DNA/RNA handling steps where amine-containing buffers are undesirable.
    • Chromatography: aqueous component for IEX/HIC and as sample diluent with controlled ionic strength.
  • Practical tips (general):
    • Reconstitute with high-purity water. Verify pH at the working temperature; adjust minimally with small aliquots of acid/base only if permissible for your method.
    • For PBS-like formulations, ionic strength is increased by adding NaCl (literature); this product is phosphate buffer only unless otherwise noted—check CoA.
    • Avoid phosphate with solutions rich in Ca2+/Mg2+ to prevent precipitation; pre-screen enzyme systems for phosphate sensitivity.
    • Filter-sterilize (0.22 µm) for cell- or protein-facing applications; avoid autoclaving if your process shows pH drift—validate.

Manufacturer Applications: Not specified in Product Data. The above represent common literature uses for phosphate buffer at pH ~7.2 and should be adapted to your method needs.

Reaction Conditions

No item-specific reaction condition data are provided. The following are general, literature-based guidelines for using phosphate buffer (pH 7.2) as a reaction medium in biochemical and analytical contexts.

  • Typical concentrations: 10–100 mM phosphate; adjust ionic strength with NaCl/KCl if required by the method.
  • Temperature: Commonly 4–37 °C for biochemical reactions; verify pH at the operating temperature due to small temperature dependence of pKa2.
  • Additives: Surfactants (e.g., 0.05% Tween 20) for wash buffers; preservatives (e.g., 0.02% sodium azide) for storage solutions—only add if appropriate and safe for your application. This item is phosphate buffer only unless specified on the CoA.
  • Reaction times: Method-dependent; buffer provides pH stability rather than kinetic control.
  • Expected performance: Stable pH near neutrality; monitor for precipitation if divalent cations are present.
  • Compatibility notes:
    • Avoid with EDC/NHS coupling to carboxyls—MES or other buffers are commonly recommended.
    • For metal-catalyzed transformations or assays, test for phosphate inhibition/coordination.

Always adapt conditions to your specific protocol and verify with small-scale trials.

Safety and Handling
  • GHS classification, signal word, pictograms, H/P statements: Not specified for this item; refer to the product SDS for authoritative safety information.
  • General hazards (literature): Phosphate buffer salts are generally regarded as of low acute toxicity and low volatility. Dust may cause mechanical irritation to eyes/respiratory tract. Solutions at neutral pH are typically not corrosive.
  • PPE (good laboratory practice):
    • Wear lab coat, safety glasses, and appropriate gloves (nitrile) when handling powder and solutions.
    • Use dust control measures when weighing; avoid inhalation of particulates.
  • Handling advice:
    • Prepare solutions with deionized water. Mix until fully dissolved before pH verification.
    • Avoid contamination; use clean scoops and containers. For sterile applications, prepare under aseptic conditions and filter-sterilize (0.22 µm) if required.
  • Incompatibilities (literature):
    • Divalent cations (Ca2+, Mg2+) can precipitate with phosphate, causing turbidity and fouling of fluid systems and columns.
    • Strong acids/bases will shift pH and destroy buffer capacity.
    • Avoid mixing phosphate buffers with solutions intended for calcium-sensitive processes where precipitation would be problematic (e.g., some cell culture feeds or enzyme assays requiring free Ca2+).
  • First-aid overview (general):
    • Eye/skin contact: Rinse with water. Remove contaminated clothing.
    • Inhalation of dust: Move to fresh air; rinse mouth. Seek medical attention if irritation persists.
  • Storage: Store the dehydrated powder at room temperature in a tightly closed container. Protect from moisture and humidity to prevent caking and composition drift. Always defer to the SDS/label for any additional, item-specific precautions.
Solvent Selection

This product is itself a buffer system rather than an organic solvent. Selection considerations focus on where a pH 7.2 phosphate medium is appropriate versus alternatives.

  • Polarity and medium (general):
    • Aqueous, highly polar, ionic medium once reconstituted. Provides strong buffering near neutrality with the H2PO4−/HPO42− pair.
  • Miscibility/compatibility (literature):
    • Fully miscible with water; miscible with typical aqueous additives (salts, sugars, surfactants at low levels). Not miscible with most neat organic solvents; can be used as the aqueous phase in biphasic systems.
  • When to choose phosphate pH 7.2:
    • Protein handling near physiological pH where Tris amine reactivity is undesirable.
    • Enzyme assays that tolerate phosphate and benefit from its minimal temperature coefficient.
    • Ion-exchange chromatography mobile phases (aqueous component) where inorganic buffers are preferred for MS-inactive conditions.
  • When to avoid or consider alternatives:
    • Processes involving Ca2+/Mg2+ (risk of precipitation) → consider HEPES, MOPS, or Tris without phosphate.
    • Carbodiimide (EDC/NHS) couplings to carboxyls → MES or PBS without phosphate is typically advised (phosphate can reduce coupling efficiency; literature).
    • Metal-catalyzed reactions or systems sensitive to phosphate coordination.

Small comparison (literature):

  • Phosphate (pH 7.2): inorganic, minimal UV background, can precipitate with divalent cations.
  • Tris (pH 7–9): good buffer capacity, primary amine can participate in reactions and shows higher temperature coefficient.
  • HEPES (pH 6.8–8.2): zwitterionic, low metal binding, higher cost and lower biodegradability vs phosphate.
Storage and Reconstitution
  • Storage (from Product Data): Store the dehydrated product at room temperature. Ship under normal conditions. Keep tightly closed and protected from moisture and humidity.
  • Shelf life: Not specified for this item; refer to CoA/Spec Sheet.
  • Reconstitution: Item-specific mass and final volume instructions are Not specified; follow the label/CoA. General steps (literature):
    1. Add the specified mass of dehydrated buffer blend to ~80–90% of the final volume of high-purity water.
    2. Stir until fully dissolved; bring to final volume with water.
    3. Verify pH at 20–25 °C; adjust minimally with dilute acid/base only if your method allows.
    4. For sterile applications, filter-sterilize through a 0.22 µm membrane.
  • Storage of prepared solutions (general guidance):
    • Short term: 2–8 °C for 1–4 weeks, protected from contamination.
    • Long term: Prepare fresh as needed; freezing can cause salt crystallization and pH/ionic-strength shifts—validate before use if frozen/thawed.
  • Freeze–thaw: Avoid repeated freeze–thaw of buffer solutions; aliquot if freezing is necessary for your workflow and verify pH after thawing.
  • Compatibility and inspection: Avoid contact with solutions rich in Ca2+/Mg2+ to prevent precipitation. Inspect solutions for clarity; discard if turbidity or microbial growth is observed.

For authoritative, lot-specific instructions and acceptance criteria (e.g., target pH tolerance, concentration), consult the product’s CoA/Spec Sheet.

Structure and Identity

This product is a dehydrated, pre-formulated phosphate buffering blend intended to yield an aqueous buffer at pH 7.2 upon dissolution.

  • Item identity (from Product Data)

    • Product name: Phosphate Buffer (pH 7.2, Dehydrated) (ChP)
    • Grade: BioReagent
    • Form: Dehydrated solid blend (salts) intended for reconstitution
    • Storage: Room temperature; shipped under normal conditions
    • CAS / CID / SMILES / InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula / molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Structural features (general chemistry, literature)

    • Phosphate buffers are typically composed of a conjugate acid/base pair of inorganic phosphate salts such as NaH2PO4/Na2HPO4 or KH2PO4/K2HPO4 (literature). The buffering species is the dihydrogen phosphate/hydrogen phosphate couple (H2PO4−/HPO42−).
    • No discrete single-molecule structure applies; the system is an ionic mixture in the solid state that forms an aqueous buffer upon dissolution.
  • 2D description (general)

    • Constituent ions are tetrahedral phosphate anions (PO43−) in protonated forms (H2PO4−, HPO42−) balanced by alkali metal cations (commonly Na+ or K+ in literature formulations). The relative ratio sets pH ≈ 7.2 at the stated concentration and temperature.

Note: Exact salt identities, stoichiometry, and any additional components for this catalog item are not specified here; consult the CoA/Specification Sheet for definitive composition.

Synthetic Utility

As an aqueous buffer at pH 7.2, this product serves primarily as a medium/environment rather than a reactive reagent in small-molecule synthesis.

  • Utility in synthesis workflows (literature, general):
    • Aqueous phase for biphasic oxidations/reductions where pH control is needed (e.g., TEMPO-mediated oxidations in water-organic biphasic systems—buffer controls pH but phosphate may coordinate metals; validate).
    • Workup/quench medium to neutralize reaction mixtures to near-neutral pH before extraction.
    • Medium for biocatalysis employing phosphate-tolerant enzymes; note some metalloenzymes can be inhibited by phosphate.
  • Non-utility/limitations:
    • Not suitable for reactions sensitive to phosphate anions (e.g., certain metal-catalyzed couplings) or where low ionic strength is required.
    • Not volatile—avoid in lyophilization of analytes where volatile buffers (e.g., ammonium bicarbonate) are preferred.

Because composition details for this item are not provided, confirm compatibility empirically and consult the CoA/Spec Sheet for any constraints before integrating into synthetic processes.

Target Specificity

Not applicable. This product is a non-biological reagent (buffer blend) and is not an antibody, probe, or affinity reagent. No target specificity, clone, isotype, or species reactivity data apply.

Foire aux questions

How should this product be stored?
Store at room temperature.

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.