2-(4-Fluorophenyl)-6-methylmorpholine - ≥98% , CAS No.1099679-40-9

CAS: 1099679-40-9 Cat. No.: F937401 分子式: C11H14FNO 分子量: 195.24 PubChem CID: 43367000
注文可能
グレード&純度 ≥98%
Storage
Room temperature
★
サイズ
USA
ドイツ (EU)*
価格
個数
50mg
F937401-50mg
受注生産 · 8~12週間
$493.90
100mg
F937401-100mg
受注生産 · 8~12週間
$561.90
250mg
F937401-250mg
受注生産 · 8~12週間
$654.90
Enter a quantity for the sizes you want to add.

仕様

仕様と純度
≥98%
保管条件
Room temperature
純度
≥98%
名前と識別子
SMILES
CC1CNCC(O1)C2=CC=C(C=C2)F
IUPAC Name
2-(4-fluorophenyl)-6-methylmorpholine
InChIKey
LKPBWYNPOQOBRH-UHFFFAOYSA-N
InChI
1S/C11H14FNO/c1-8-6-13-7-11(14-8)9-2-4-10(12)5-3-9/h2-5,8,11,13H,6-7H2,1H3
異性体SMILES
CC1CNCC(O1)C2=CC=C(C=C2)F
PubChem CID
43367000
分子量
195.24

詳細データ

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassOrganoheterocyclic compounds
分類Oxazinanes
SubclassMorpholines
Intermediate Tree Nodes Not available
Direct ParentPhenylmorpholines
Alternative Parents Fluorobenzenes  Aralkylamines  Aryl fluorides  Oxacyclic compounds  Dialkylamines  Dialkyl ethers  Azacyclic compounds  Organofluorides  Hydrocarbon derivatives  
Molecular FrameworkAromatic heteromonocyclic compounds
Substituents Phenylmorpholine - Fluorobenzene - Halobenzene - Aralkylamine - Aryl fluoride - Aryl halide - Monocyclic benzene moiety - Benzenoid - Dialkyl ether - Secondary aliphatic amine - Ether - Oxacycle - Azacycle - Secondary amine - Organic oxygen compound - Organic nitrogen compound - Hydrocarbon derivative - Organohalogen compound - Organofluoride - Organonitrogen compound - Organooxygen compound - Amine - Aromatic heteromonocyclic compound
説明This compound belongs to the class of organic compounds known as phenylmorpholines. These are aromatic compounds containing a morpholine ring and a benzene ring linked to each other through a CC or a CN bond.
External Descriptors Not available
3 D構造
インタラクティブ化学構造モデル





証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
化学的性質と物理的性質
分子量195.230 g/mol
XLogP31.500
Hydrogen Bond Donor Count1
Hydrogen Bond Acceptor Count3
Rotatable Bond Count1
Exact Mass195.106 Da
Monoisotopic Mass195.106 Da
Topological Polar Surface Area21.300 Ų
Heavy Atom Count14
Formal Charge0
Complexity180.000
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count2
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
ソリューション計算機
レビュー

顧客レビュー

Application Protocols

No standardized biological application protocols (e.g., WB, IHC, IF, FC) apply to this small-molecule reagent.

General laboratory use suggestions:

  • Prepare stock solutions in DMSO, MeCN, or DCM depending on the planned transformation; filter if particulate matter is observed.
  • For screening in chemical biology, consider forming a defined salt to improve aqueous handling; document concentration and pH rigorously.

For any specialized application, validate conditions empirically and consult the primary literature.

Biological Roles

This product is a small organic building block and is provided strictly for research use. No biological role is assigned to the material as supplied.

General context (literature-based):

  • Morpholine motifs are common in chemical biology probes and medicinal chemistry scaffolds due to tunable basicity and hydrogen-bonding properties; however, any specific biological activity requires context of the larger molecule into which the morpholine is incorporated.
  • The para-fluorophenyl group is frequently used to modulate metabolic stability and binding properties in SAR, but the standalone compound here is not intended for biological testing without appropriate hazard and regulatory review.

No clinical or therapeutic claims are made. For any work in biological systems, ensure appropriate approvals and consult the SDS for safe handling.

Buffer Applications

Not typically used as a defined buffer component.

  • While tertiary amines can participate in acid–base equilibria, this compound is not a standardized buffering agent with a defined pKa/pH window and is not recommended for preparing laboratory buffers. For buffer preparation, use established systems (e.g., phosphate, HEPES, Tris) and refer to their validated recipes.
  • If preparing aqueous solutions for screening, consider forming a water-soluble ammonium salt with a suitable acid; verify solubility and pH empirically.
Green Alternatives

Greener practice focuses on solvent and process choices rather than replacing the heterocycle itself (which is often structure-critical in discovery chemistry).

  • Solvent choices (literature-based greener options):
    • Prefer 2-MeTHF or CPME over THF/Et2O for extractions and some reactions (better EHS profile, lower peroxide risk than ethers like THF; check compatibility with amines).
    • Use EtOAc or Me-THF/DCM mixtures instead of neat chlorinated solvents where feasible; replace DMF/DMSO with MeCN or propylene carbonate when solubility allows.
    • For recrystallizing amine salts, ethanol/isopropanol and water–alcohol mixtures are greener than chlorinated solvents.

Trade-offs:

  • High-boiling polar aprotics (DMF/DMSO) provide superior solubility but are energy intensive to remove; plan solvent swaps or antisolvent crystallizations to reduce footprint.
  • Aryl fluoride functionality increases persistence under harsh conditions; choose catalytic, atom-economical routes (e.g., Pd-catalyzed C–H functionalization) to minimize halogenated waste.

Process suggestions:

  • Employ continuous-flow or microwave conditions to reduce reaction times/energy.
  • Opt for catalytic over stoichiometric activation (e.g., organocatalysis or low loading transition-metal catalysis) with benign bases (carbonate) when compatible with the amine substrate.
Pharmaceutical Uses

No pharmacopeial or excipient status is provided. This product is offered for research use only.

General formulation context (literature-based):

  • Morpholine-containing amines are common in medicinal chemistry intermediates and screening libraries. They may be converted to salts (e.g., hydrochloride, mesylate) to improve crystallinity and handling in discovery workflows.
  • Any use in GMP or clinical manufacturing would require qualification, specification setting, and regulatory assessment; none of these are implied by this catalog listing.

Item-specific notes:

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Weight/Formula: Not specified for this item; refer to CoA/Spec Sheet.
Physical Properties

Item-specific physico-chemical specifications are not provided in the Product Data. Refer to the CoA/Spec Sheet for exact measured values.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Boiling point: Not specified for this item; refer to CoA/Spec Sheet. (For context, morpholine derivatives often boil in the 180–260 °C range at ambient pressure; literature generalization.)
  • Melting point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density: Not specified for this item; refer to CoA/Spec Sheet.
  • Refractive index: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility (general/literature-based expectations):
    • Good solubility in polar aprotic solvents (DMF, DMSO, MeCN) and chlorinated solvents (DCM, CHCl3).
    • Moderate solubility in short-chain alcohols; limited solubility expected in water compared to morpholine due to aryl/methyl substitution.
  • Acid-base: tertiary amine (conjugate acid pKa for morpholine ≈ 8.3–8.6, literature). Substitution may shift basicity slightly.
  • Partitioning: Aryl/methyl substitution increases hydrophobicity vs morpholine (qualitative literature note).

Note: All numerical values that would constitute item-specific specifications (e.g., exact bp/mp, density) are Not specified for this item; refer to CoA/Spec Sheet.

Quality and Grades
  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.

Interpretation and guidance:

  • In the absence of a stated grade, verify fit-for-purpose via CoA: assay/purity method (e.g., GC, HPLC, NMR), residual solvents, and identity (NMR, MS, IR).
  • For structure-rich heterocycles, review diastereomeric ratio (if applicable) and any optical rotation data; the 2,6-disubstituted morpholine framework can present stereochemical complexity.
  • If using in chromatographic or trace analysis contexts, ensure UV-Vis background and residual amines/aldehydes meet your method requirements (request HPLC/LC–MS suitable grade where applicable).
  • Metal content, water, and peroxide levels: Not specified for this item; refer to CoA/Spec Sheet.

Documentation recommended for regulated workflows:

  • Batch-specific CoA with purity profile and analytical chromatograms.
  • SDS aligned with your jurisdiction.
  • If chiral/diastereomeric composition is critical, request additional stereochemical characterization.
Reaction and Applications

This 2,6-disubstituted morpholine serves as a versatile intermediate and base in synthesis, particularly in medicinal chemistry campaigns exploring morpholine motifs.

Representative applications (literature/general):

  • Building block incorporation: introduces a morpholine vector into aryl frameworks via C–C or C–N bond formation after appropriate functionalization (e.g., N-acylation/alkylation, oxidation to N-oxide followed by rearrangements).
  • Salt formation: readily forms ammonium salts with mineral or sulfonic acids for purification, crystallinity, or formulation of screening libraries.
  • Protection/derivatization: N-acyl or N-carbamate derivatives can modulate basicity and lipophilicity; benzylation/alkylation at N provides tertiary amine variants for SAR.
  • Late-stage modification: aryl para-fluoride is typically inert to nucleophilic aromatic substitution in the absence of ring activation; however, it provides a spectroscopic handle and can be leveraged in directed metalation (strong bases) or as a leaving group under specialized cross-coupling protocols (literature-advanced).
  • Organocatalysis/base: tertiary amines can act as mild bases or nucleophilic catalysts (e.g., for Michael additions) in non-protic media when sterics/electronics permit.

Practical tips:

  • Drying: if water-sensitive transformations are planned, dry under high vacuum over P2O5 or molecular sieves; amines can retain moisture via hydrogen bonding.
  • Acid scavenging: tertiary amines can neutralize generated HX; account for stoichiometry to avoid salt precipitation.
  • Stereochemistry: if a single diastereomer is required, consider asymmetric synthesis or chromatographic resolution; monitor by chiral HPLC or NMR with chiral shift reagents.
Reaction Conditions

General literature-guided conditions for transforming tertiary morpholine derivatives (not item-specific specifications):

  • N-Acylation/Carbamoylation: acid chlorides or activated esters, 0–25 °C in DCM, THF, or MeCN with base (NEt3, DIPEA). Typical times 0.5–4 h. Monitor to avoid over-acylation or O-acylation; tertiary amine favors N-acylation.
  • N-Alkylation/Quaternization: alkyl halides or sulfonates in MeCN, acetone, or DMF with mild heating (25–60 °C). Quaternary ammonium salts may crystallize from EtOAc/ether.
  • N-Oxide formation: m-CPBA or H2O2/AcOH at 0–25 °C in DCM/MeCN; work up with reducing sulfites if needed. Times 1–3 h.
  • Directed α-functionalization: strong bases (e.g., s-BuLi/TMEDA) at −78 to −40 °C under inert atmosphere can effect metalation α to heteroatoms in related systems; quench with electrophiles (advanced practice; ensure compatibility with aryl fluoride).
  • Salt formation: treat with HCl(g) in Et2O or ethanolic HCl at 0–25 °C to afford crystalline hydrochloride salts; isolate by filtration and dry under vacuum.

Solvents: DCM, MeCN, THF, DMF/DMSO (for high solubility); choose greener options when possible (EtOAc, 2-MeTHF).

Yields: highly substrate/condition dependent; 60–95% commonly reported for clean N-acylations/alkylations in morpholine series (literature generality). Always optimize on small scale and verify by NMR/LC–MS.

Safety and Handling

Hazard classification is not provided in the Product Data. Treat as an organic amine with typical irritant properties until the SDS is reviewed.

  • GHS/CLP: Not specified for this item; refer to SDS.
  • Signal word / H-statements / Pictograms: Not specified for this item; refer to SDS.

General precautions (good laboratory practice):

  • PPE: lab coat, nitrile gloves, safety glasses; use in a chemical fume hood.
  • Avoid: inhalation of vapors/aerosols and skin/eye contact. Amines can be irritant/corrosive to mucous membranes.
  • Incompatibilities (general for tertiary amines): strong oxidizers, strong acids (forms salts; heat evolution possible), acylation/alkylation reagents; may attack certain plastics.
  • Spill/first aid (overview):
    • Skin/eye contact: rinse with water for at least 15 minutes; remove contaminated clothing; seek medical attention.
    • Inhalation: move to fresh air; seek medical attention if symptoms persist.
    • Ingestion: rinse mouth; do not induce vomiting; seek medical advice.
  • Fire safety: Treat as combustible organic; use CO2, dry chemical, or foam. Amines may emit nitrogen oxides and HF-containing species if the aryl fluoride burns; firefighters should wear SCBA.

Always consult the SDS for authoritative safety, toxicity, and disposal guidance before use.

Solvent Selection

As a moderately polar, tertiary amine–containing heterocycle with an aryl substituent, this compound dissolves best in polar organic media.

  • Polarity class (qualitative, literature): polar aprotic–compatible; amphiphilic due to tertiary amine and ring oxygen, but hydrophobic aryl/methyl reduce water solubility vs morpholine.
  • Preferred solvents for stock solutions and reactions: DMSO, DMF, acetonitrile, dichloromethane, chloroform, THF, ethyl acetate, methanol/ethanol (check for salt formation in acidic alcohols).
  • Aqueous handling: formation of water-soluble ammonium salts is possible upon protonation with mineral or organic acids; free base likely shows limited water solubility.
  • Chromatography: elutes at moderate to high Rf on silica; add a small % of base (e.g., 0.5–2% triethylamine) to mobile phase to suppress tailing of basic analytes (general tip).

Comparison (general guidance):

  • DCM vs EtOAc: DCM offers stronger solvation for arylated amines; EtOAc is greener and suitable for workups/extractions.
  • MeCN vs DMF/DMSO: MeCN provides lower viscosity and easier removal; DMF/DMSO maximize solubility for highly substituted amines but are higher boiling.
  • Alcohols: useful for salt formation and recrystallization of amine salts; may promote side reactions in strong acylation/alkylation conditions.
Storage and Reconstitution
  • Storage condition (from Product Data): Room temperature.
  • Shipped in: Not specified for this item; refer to CoA/Spec Sheet.

Handling and stability (general guidance):

  • Keep container tightly closed in a dry, well-ventilated area. Protect from strong acids/oxidants.
  • If prolonged storage is anticipated, consider inert headspace (N2/Ar) to minimize oxidative discoloration typical of some amines.
  • Avoid moisture ingress; amines can absorb CO2/acidic vapors and form salts.

Reconstitution/preparation of solutions:

  • For stock solutions, dissolve in dry DMSO, DMF, MeCN, THF, or DCM to the desired concentration (e.g., 10–100 mM for library work). Filter through a PTFE syringe filter (0.2–0.45 µm) if needed.
  • For aqueous work, prepare a water-soluble salt by adding a stoichiometric acid (e.g., HCl, H2SO4, methane sulfonic acid) and then dilute with water or buffer; verify pH and stability.
  • Storage of solutions: DMSO or MeCN stocks are best kept at 2–8 °C or −20 °C in sealed vials; minimize freeze–thaw cycles by aliquoting. Light protection is generally not critical but recommended for long-term storage.

Always refer to the product’s CoA and SDS for definitive guidance on stability and handling.

Structure and Identity

A substituted morpholine bearing a para-fluorophenyl at C-2 and a methyl at C-6; a useful heteroaromatic building block for discovery chemistry.

  • SKU: F937401
  • Product name: 2-(4-Fluorophenyl)-6-methylmorpholine
  • CAS: 1099679-40-9
  • PubChem CID: 43367000
  • InChIKey (as provided in Product Data): 202018
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general/literature-based):

  • Core ring: morpholine (six-membered heterocycle containing one O and one tertiary amine N) with substitution at C-2 and C-6 (both α to heteroatoms).
  • Substituents: para-fluorophenyl at C-2; methyl at C-6.
  • Functional groups: tertiary amine (basic), ether (ring oxygen), aryl fluoride.
  • Stereochemistry: C-2 and C-6 are stereogenic centers in 2,6-disubstituted morpholines. Unless otherwise specified, commercial material is typically supplied as a mixture of diastereomers/enantiomers (literature note).
  • 2D description: a chair-like morpholine ring where the nitrogen and oxygen occupy opposite ring positions; the C-2 bears a 4-fluorophenyl substituent, and the C-6 bears a methyl group; the aromatic ring carries F at para.
Synthetic Utility

Key reactivity derives from the tertiary amine/ether ring and the para-fluorophenyl substituent.

  • Functional group handles:
    • Tertiary amine: N-acylation, N-alkylation, quaternization (to ammonium salts), or oxidation to N-oxide (facilitates subsequent rearrangements or C–H functionalizations; literature).
    • Ether oxygen: generally inert; can direct metalation adjacent to heteroatoms under strong bases.
    • Aryl fluoride: typically robust to many conditions; can participate in specialized cross-couplings or directed metalations; useful as a spectroscopic/analytical tag.
  • Stereochemical considerations: 2,6-disubstituted morpholines present two stereocenters. Access to single stereoisomers may be achieved via asymmetric synthesis, chiral pool strategies, or resolution (diastereomeric salt formation or chiral chromatography).
  • Retrosynthetic value: enables rapid installation of morpholine moiety into aryl frameworks; complementary to strategies that attach morpholine via N-linkage. The C-linked morpholine may exhibit different conformational and electronic properties in SAR matrices.
  • Purification/handling: amine-containing molecules can tail on silica; add 0.5–2% NEt3 to eluent or use basic alumina. Salt formation/crystallization is often effective for bulk purification.

This substrate is suitable for library diversification, fragment elaboration, and as a scaffold in structure–property exploration.

Target Specificity

Not applicable. This product is a small-molecule building block, not a biological targeting reagent (e.g., antibody, ligand standard). No antigen/epitope specificity, species reactivity, or clone information applies.

よくある質問

What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1099679-40-9, the molecular formula is C11H14FNO, and the molecular weight is 195.24 g/mol. InChIKey LKPBWYNPOQOBRH-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.