Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
レビュー
顧客レビュー
Application Protocols
Not applicable. No immunoassay or bioassay protocols are defined for this chemical standard. For analytical use, follow your method-specific SOPs (e.g., GC–MS or HPLC calibration workflows). If concentration, diluent, or ampule format is needed, refer to the label and CoA for this specific lot (not specified here).
Biological Roles
General biochemical context (literature): 2-Chlorophenol is not a natural metabolite; it is a xenobiotic arising from industrial use and as a degradation intermediate of chlorinated aromatics. It can be formed during chlorination of phenolic waters or as a byproduct in pesticide synthesis/degradation.
Biotransformation and fate:
Microbial degradation pathways include initial hydroxylation to chlorocatechols, followed by ring-cleavage via ortho- or meta-cleavage pathways. Dehalogenation steps (reductive or hydrolytic) can yield phenol.
In mammals, phase I metabolism (CYP-mediated hydroxylation) and phase II conjugation (sulfation, glucuronidation) enhance elimination; nevertheless, acute toxicity arises from protein denaturation and membrane disruption due to its phenolic/halogenated nature.
Toxicological notes (non-clinical, literature):
Corrosive to tissues; uncouples oxidative phosphorylation at sufficient concentrations; exhibits narcosis-like effects typical of phenolic compounds.
Aquatic toxicity is high; bioaccumulation potential is moderate (log Kow ~2.8) but mitigated by ionization at environmental pH.
Laboratory relevance:
Frequently used as a target analyte in ecotoxicology studies and as a model substrate for phenol oxidases and peroxidases (e.g., horseradish peroxidase-mediated oxidative coupling), enabling kinetic comparisons across substituted phenols.
No medical/clinical uses are implied; this information is provided solely to support research planning and risk assessment.
Buffer Applications
2-Chlorophenol is not used as a buffering agent. Its pKa (~8.5, literature) does not make it suitable for precise buffering in biological systems due to toxicity and poor buffering capacity near physiological ionic strengths.
Practical note: For pH control in assays involving this analyte, use established buffers (e.g., phosphate, Tris, borate) and avoid introducing 2-chlorophenol as a buffer component. If needed, maintain pH above its pKa to keep it deprotonated (for solubility/ionization control) but do so with an appropriate, compatible buffer system.
Green Alternatives
Because 2-chlorophenol is toxic, corrosive, and environmentally hazardous, green chemistry planning should aim to minimize its use and release while maintaining data quality.
Substitution possibilities (context-dependent):
Analytical method development: Consider less hazardous surrogates (e.g., phenol or cresols) when a chlorinated phenol is not strictly required for system checks; however, regulatory calibrations for chlorophenols require the target analyte itself.
Synthetic transformations: If only phenolic reactivity is needed, substitute with non-halogenated phenols to reduce halogenated waste.
Process and solvent choices (greener operations):
Prefer greener solvents for solutions/standards when compatible (ethanol, ethyl acetate, 2-MeTHF) instead of chlorinated solvents. For LC methods, water–acetonitrile can be favored over acetonitrile–methanol mixes with high organic content.
For cross-couplings, use aqueous micellar media or bio-based solvents where feasible; modern Pd catalysis tolerates water/ethanol mixtures for some substrates.
Waste and exposure reduction:
Microscale standard preparation and single-use ampules minimize repeated thaw/refreeze and headspace losses.
Closed transfers with gastight syringes; collect all residues as halogenated organic waste.
Comparison (general):
2-Chlorophenol vs. phenol: phenol is less persistent/toxic and often adequate for method development, but it cannot replace 2-chlorophenol in target-analyte calibration.
DCM vs. ethyl acetate for extractions: ethyl acetate is a greener alternative with lower toxicity; verify recovery and matrix effects before substitution.
Pharmaceutical Uses
No excipient or formulation role is specified for this item. 2-Chlorophenol is not typically used as a pharmaceutical excipient.
Analytical/QC context (general): It can serve as a reference analyte or system suitability compound in pharmaceutical analytical methods exploring phenolic impurities or environmental contaminants.
Regulatory notes: If using as a reference standard in GMP/GLP settings, confirm that the material’s documentation (CoA) meets your quality system requirements (identity confirmation, purity assessment, storage/stability, and, if needed, traceability). This product is designated for research use only; it is not intended for human or veterinary applications.
Physical Properties
Note: Values below are literature/reference values and provided for context; they are not item-specific specifications. For certificate values applicable to this lot, see the CoA/Spec Sheet.
State/appearance (literature): colorless to pale yellow low-melting solid/liquid (mp near ambient); may crystallize below room temperature.
Melting point (literature): ~8–9 °C
Boiling point (literature): ~176–177 °C at 1 atm
Density (literature): ~1.26–1.27 g/mL at 25 °C
Refractive index (literature): nD20 ~1.553–1.556
Vapor pressure (literature): ~0.5–0.8 mmHg at 25 °C
Aqueous solubility (literature): moderately soluble; on the order of 20–30 g/L at 25 °C; fully miscible with many organic solvents (alcohols, ethers, ketones, chlorinated solvents).
pKa (phenolic OH, literature): ~8.5 (25 °C, water)
Log Kow (literature): ~2.7–2.9
Item-specific specifications (if required for your method validation): Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
Item-specific status:
Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Designation: “Standard” in the product name indicates intent for analytical/reference use, such as calibration or system suitability. Unless explicitly stated on the CoA, this is not a certified reference material (CRM).
What “Standard” typically implies (general guidance):
Manufactured and packaged to support analytical workflows (e.g., GC/GC–MS/HPLC calibration of phenolic analytes).
Emphasis on identity confirmation (CAS match, spectral conformity) and controlled handling/packaging to minimize contamination.
If supplied as neat material, users often gravimetrically prepare stock solutions for traceable calibrations. If supplied as a solution, concentration and solvent would be defined on the label/CoA (not provided here).
Considerations for analytical use:
Verify identity by orthogonal techniques where required (GC–MS EI spectrum vs. library, FTIR of phenolic O–H stretch, NMR aromatic pattern).
For regulated methods (e.g., environmental phenols), confirm acceptance criteria (purity, uncertainty, stability) per your method. If a CRM is required, ensure the certificate explicitly states metrological traceability.
Stabilizers/additives for this item: Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
Analytical applications (most typical for a “Standard”):
Environmental monitoring: calibration/QA for US EPA and similar methods targeting chlorophenols in water, soil, and waste (e.g., GC–MS after derivatization, or LC with electrochemical/UV detection).
System suitability: retention time markers and response-factor determination in phenols panels.
Derivatization studies: silylation (BSTFA/TMCS), acylation (acetic anhydride) to improve GC volatility and peak shape.
Electrophilic aromatic substitution (EAS): The phenolic OH activates the ring; with the ortho position blocked by Cl, substitution occurs predominantly at the para (4-) position (e.g., nitration, sulfonation, Friedel–Crafts acylation under controlled conditions).
Nucleophilic transformations at oxygen: formation of 2-chlorophenyl ethers via Williamson ether synthesis (RO− generated by base; DMF/DMSO, 20–80 °C).
Cross-coupling of aryl chloride: Pd-catalyzed Suzuki–Miyaura, Buchwald–Hartwig, or Ullmann-type couplings are possible but typically require more active catalysts/ligands for aryl chlorides (e.g., BrettPhos/XPhos systems).
Directed lithiation/halogen–lithium exchange: At low temperature (≤−78 °C), BuLi or t-BuLi in THF/Et2O, often with prior protection of the phenol (e.g., as TMS ether) to access 2-lithiophenol equivalents for formylation or borylation.
Practical tips:
Drying: phenols can retain water; azeotropic drying (toluene) or vacuum may be useful before moisture-sensitive steps.
For analytical standards, prepare gravimetrically and store aliquots cold and protected from light to minimize oxidative discoloration.
Reaction Conditions
General, literature-based guidance for common transformations of 2-chlorophenol (not item-specific specifications):
Base: K2CO3 or NaH; solvent: DMF, DMSO, or acetone; temperature: 25–80 °C; time: 2–18 h. Dry conditions help minimize side reactions. Typical isolated yields: 60–90% depending on alkyl halide.
Esterification/acylation:
With acyl chlorides/anhydrides under pyridine or DMAP catalysis; solvents: DCM, toluene; 0–25 °C; rapid (0.5–4 h). Work-up with aqueous base to remove acid byproducts.
Nitration: HNO3/H2SO4 at 0–5 °C to control exotherm; regioselectivity favors 4-nitro-2-chlorophenol.
Friedel–Crafts acylation: Acyl chloride, AlCl3, 0–25 °C; OH often protected or directed acylation via Fries rearrangement of phenyl esters.
Pd-catalyzed cross-coupling on aryl chloride:
Suzuki–Miyaura: Pd2(dba)3 (1–2 mol%), XPhos/BrettPhos (2–4 mol%), base (K3PO4, Cs2CO3), solvent (dioxane/H2O or toluene), 80–110 °C, 4–24 h. Phenol may require protection (e.g., benzyl, silyl) to avoid competitive coordination.
Buchwald–Hartwig amination: Pd(0) with bulky biaryl phosphines, strong base (NaOtBu), 90–120 °C.
n-BuLi or t-BuLi in dry THF or Et2O at −78 °C; quench with electrophiles (CO2, DMF, B(OMe)3). Protect the phenol (TMS, MOM) to suppress proton quench. Typical conversions are high with careful temperature control.
These conditions are illustrative; optimize for your substrate/equipment and follow appropriate safety measures.
Safety and Handling
Authoritative safety information resides in the product SDS. The following is general guidance for 2-chlorophenol based on literature and common GHS classifications; consult the SDS for this specific item.
GHS overview (literature, substance-level):
Likely classifications: Acute Toxicity (oral/dermal/inhalation), Skin Corrosion/Serious Eye Damage, Specific Target Organ Toxicity (single exposure) – irritant, Hazardous to the Aquatic Environment (acute/chronic).
Representative H-statements (literature examples): causes severe skin burns and eye damage; toxic if swallowed, in contact with skin, or if inhaled; very toxic to aquatic life with long-lasting effects.
PPE and handling:
Use chemical-resistant gloves (e.g., butyl rubber, Viton), lab coat, splash goggles or face shield. Work in a fume hood.
Avoid skin/eye contact and inhalation; minimize aerosol and vapor generation.
Incompatibilities and reactivity (general):
Strong bases generate phenoxide salts; strong oxidizers may induce exothermic reactions; reactive with acid chlorides/anhydrides (acylation). Avoid alkali metals and strong reducing agents.
Skin/eye: immediate decontamination with copious water for ≥15 min; remove contaminated clothing; seek medical attention.
Inhalation: move to fresh air; oxygen/supportive care as needed; seek medical attention.
Ingestion: rinse mouth; do not induce vomiting unless directed; seek medical attention.
Storage notes specific to this item: Store at 2–8 °C; keep tightly closed in a well-ventilated place. Protect from light and moisture. Segregate from incompatibles.
Waste: Treat as halogenated organic hazardous waste; prevent release to the environment.
Solvent Selection
2-Chlorophenol is both an analyte and a moderately polar organic compound. Solvent selection depends on task (sample prep, calibration, reaction medium).
Polarity/miscibility (literature, general):
Moderate polarity; hydrogen-bond donor/acceptor via phenolic OH.
Miscible with many organics (MeOH, EtOH, acetone, ethyl acetate, DCM, toluene). Moderately to highly soluble in water (~20–30 g/L at 25 °C).
For analytical standards:
GC/GC–MS: Prepare stocks in high-purity acetone, ethyl acetate, or isooctane depending on method. Avoid protic solvents if derivatizing (e.g., silylation) downstream.
HPLC/LC–MS: Methanol, acetonitrile, or water/methanol with 0.1% formic acid (if ion suppression acceptable). For negative ESI, basic modifiers (ammonium bicarbonate) can enhance deprotonation of the phenol.
Headspace SPME: Use water or low-organic matrices; salt-out (NaCl) may improve partitioning.
For synthesis:
As a nucleophile (phenoxide): polar aprotic solvents (DMF, DMSO, MeCN) under basic conditions facilitate Williamson ether synthesis.
As an aryl chloride coupling partner: high-boiling polar aprotics (dioxane, DMF, toluene with Pd-catalyst) are common.
Small comparison (general):
Methanol: excellent solubility; good for HPLC calibration; not GC-friendly for silylation workflows.
Acetone/ethyl acetate: GC compatible; good volatility; avoid for base-sensitive steps.
Acetonitrile: LC-friendly, low UV cut-off; weaker H-bonding than MeOH, sometimes better for stability.
Storage and Reconstitution
Item-specific storage and shipping:
Store at 2–8 °C (Product Data). Shipments are made on wet ice via FedEx DG Service.
Container/handling recommendations (general best practice):
Keep tightly closed in amber glass to minimize light exposure and oxidation. Use PTFE-lined caps. Purge headspace with inert gas (nitrogen/argon) for long-term storage to reduce oxidative discoloration.
Given the melting point near ambient (~8–9 °C, literature), the material may be solid in the refrigerator and liquid at room temperature. If crystallized, allow to warm gradually to room temperature to liquefy before aliquoting. Mix gently to ensure homogeneity.
Reconstitution/solution preparation:
If supplied neat: prepare standards gravimetrically using pre-dried Class A glassware. Common solvents include methanol, acetonitrile, acetone, or ethyl acetate (select per analytical method). Record temperature and buoyancy corrections for high-accuracy work.
If supplied as a solution: concentration, solvent, and stabilizers are Not specified for this item; refer to CoA/Spec Sheet. Invert to mix before use; avoid adsorption losses by using silanized vials for trace-level work.
Stability guidance (general):
Store cold (2–8 °C) and protected from light. Prepare single-use aliquots to avoid repeated freeze–thaw/warm cycles. Monitor for discoloration or precipitate; discard if significant changes occur.
Stabilizers/additives for this item: Not specified for this item; refer to CoA/Spec Sheet.
Structure and Identity
Brief description: 2-Chlorophenol is a chlorinated phenolic aromatic. In this product, it is supplied as a “Standard” for laboratory/research use (see Quality & Grades).
Item-specific (from Product Data):
Product name: 2-Chlorophenol Standard (SKU C299136)
CAS: 95-57-8; PubChem CID: 7245
Storage: Store at 2–8°C
Shipped on wet ice via FedEx DG Service
Research Use: For research use only
Other identifiers (SMILES, InChIKey, formula, MW): Not specified for this item; refer to CoA/Spec Sheet.
Literature/Computed identifiers (for reference only; not item specifications):
Aromatic benzene ring bearing two ortho substituents: a phenolic hydroxyl (–OH) and a chlorine (–Cl) at the 1- and 2-positions.
Functional groups: phenol (acidic hydrogen, capable of H-bonding; weak acid), aryl chloride (C–Cl on sp2 carbon).
2D description: a six-membered aromatic ring; adjacent carbons carry –OH and –Cl. The –OH activates the ring toward electrophilic substitution at the 4-position (para) while the ortho position next to –OH is occupied by Cl.
Stereochemistry: none (achiral).
Synthetic Utility
Functional group leverage:
Phenolic OH: enables etherification (Williamson), esterification (acyl chlorides/anhydrides), and directed metalation (after protection or as phenoxide).
Aryl chloride: potential handle for cross-coupling (Suzuki–Miyaura, Buchwald–Hartwig, Negishi), though aryl chlorides require more active catalysis (e.g., Pd with bulky electron-rich phosphines or NHCs).
Regioselectivity and directing effects:
The phenolic OH strongly activates the ring toward EAS; with the ortho position blocked by Cl, electrophiles typically install at the 4-position (para), affording 4-substituted products selectively.
Ortho metalation/halogen–lithium exchange at C2 can be achieved at cryogenic temperatures (THF, −78 °C), especially after temporary O-protection (e.g., TMS, MOM) to avoid proton quenching, giving access to 2-functionalized phenol derivatives.
Retrosynthetic value:
Serves as a versatile precursor to 2-alkoxyphenols (via O-alkylation), 2-acyloxyphenols (via acylation), and 2-aminophenol derivatives (through O→N transformations and/or coupling after activation of the aryl chloride).
Directed ortho-functionalization strategies enable late-stage diversification adjacent to OH while maintaining the chloro handle for subsequent cross-coupling.
Derivatization for analytics:
Silylation (e.g., BSTFA) or acylation (acetic anhydride) improves GC volatility and reduces tailing in phenolic analytes.
Target Specificity
Not applicable. This product is a small-molecule chemical standard, not a biological affinity reagent. No antigen/epitope/clone/isotype information applies.
よくある質問
How should this product be stored?
Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 95-57-8, the molecular formula is C6H5ClO, and the molecular weight is 128.56 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.