Amine Coupling Kit

Cat. No.: A1507130
注文可能
グレード&純度 BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
★
サイズ
USA
ドイツ (EU)*
価格
個数
1kit
A1507130-1kit
受注生産 · 8~12週間
$399.90
Enter a quantity for the sizes you want to add.

概要

  Amine Coupling Kit is a specialized set of reagents and materials used to covalent immobilization biomolecules (like antibodies, proteins, or peptides) carrying a primary amine group onto a carboxylated sensor surface for analysis using Surface Plasmon Resonance (SPR) biosensors.

The kit contains reagents sufficient for 30 to 50 immobilizations.

  The kit can be used with All Biacore™ systems except Biacore 4000, Biacore A100 and Biacore S51.

Contents and storage

A1507130Component 1 kitStorage
A1507130AN-Hydroxysuccinimide (NHS)115mg 2–8°C
A1507130B1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)750mg 2–8°C
A1507130C1 M Ethanolamine hydrochloride-NaOH pH 8.510.5mL2–8°C

Instructions for Use

1.     Reagent preparation

a)       Dissolve the EDC and NHS by adding 10.0 mL of filtered, deionized water to each vial.

b)       Cap vials tightly and agitate until the solids are completely dissolved.

c)       Dispense the EDC and NHS solutions separately in aliquots for storage.

d)       Store the aliquots of EDC and NHS frozen at -18°C or below. Ethanolamine may be stored at 2°C to 8°C.

Note: Use aliquots within two months.

2.     Handling

a)       Thaw frozen aliquots and agitate them gently to make sure that the solutions are homogeneous.

b)       For Biacore systems with autosampler:

Place the aliquots separately in the autosampler as instructed in the software.

c)       For Biacore systems without autosampler:

Mix equal volumes of EDC and NHS immediately before use.

3.     Suggested immobilization procedure

This guideline provides recommendations for immobilization of ligands by amine coupling to Biacore™ sensor chips. The user needs to optimize the reaction conditions based on the actual situation.

a)       Activate the surface by injecting a mixture of EDC/NHS (1:1) for 6–10 min (30 s for Sensor Chip PEG).

b)       Immobilize the ligand by injecting the ligand solution for 5–10 min.

c)       Deactivate excess reactive groups by injecting ethanolamine for 6–7 min.

Important considerations

1.     EDC and NHS Reagent solutions should be freshly prepared and mixed shortly before use. The efficiency of the immobilization will be reduced if solutions are not fresh.

2.     The EDC/NHS ester has a short half-life, so ligand should be injected shortly after activation

仕様

仕様と純度
BioReagent
等級
BioReagent
アプリケーション
Amine Coupling
保管と配送
保管条件
Store at 2-8°C
入荷
Wet ice
安定性と保管
Store at 2-8℃ long term (12 months).
Contents & Storage
A1507130Component NameAppearance1 kitStorageQuantity Per Test
A1507130AN-Hydroxysuccinimide (NHS)White solid115mg 2–8°CPrepare according to instructions
A1507130B1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)White solid750mg 2–8°CPrepare according to instructions
A1507130C1 M Ethanolamine hydrochloride-NaOH pH 8.5Colorless liquid10.5mL2–8°CPrepare according to instructions

詳細データ

証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate Type日付商品
ZJ26F0838805ZJ26F0838805Certificate of AnalysisSep 02, 2026 A1507130
よくある質問と記事
ソリューション計算機
レビュー

顧客レビュー

よくある質問

What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

グレードの選択でお困りですか?

当社のグレード選定ガイドでは、カタログ内のすべてのバリエーションについて、純度、安定剤の状態、用途への適合性を網羅しています。

BioReagent グレードガイドを見る →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.