DAB-Stained Sample Preservation Solution (For Plant) - BioReagent,for microscopy,Biological Stain

Cat. No.: D1511471
注文可能
グレード&純度 BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed.
Synonyms
Plant Section Preservation Solution (Post-DAB Staining)
Storage
Room temperature
Shipped In
Normal
★
サイズ
USA
ドイツ (EU)*
価格
個数
500ml
D1511471-500ml
US製・受注生産 · 2~4週間 ·
—
$49.90
Enter a quantity for the sizes you want to add.

概要

  Plant tissues produce various reactive oxygen species (ROS) under stress conditions. Due to their high reactivity and poor stability, ROS are typically analyzed by detecting their downstream products. Hydrogen peroxide is a common ROS. Catalyzed by catalase, it can rapidly react with DAB (3,3'-Diaminobenzidine tetrahydrochloride) to produce a brownish-red product, enabling the localized detection of hydrogen peroxide in tissues. This method is also known as the DAB staining method and is suitable for in situ staining of hydrogen peroxide in living plant tissues.

  The DAB Staining Sample Preservation Solution (for Plant) is specifically designed for preserving plant samples after localized hydrogen peroxide staining. It allows stained samples to be stored stably at room temperature for one week and is primarily suitable for whole-mount staining samples of materials such as young root tips and leaves. Areas with hydrogen peroxide accumulation appear brown to dark brown after staining. This product is for research use only and not intended for clinical diagnosis or other non-research purposes.

Materials to Be Prepared by User

  • Fresh plant leaves or roots, tap water, distilled water, 95% ethanol
  • Ultrasonic cleaner, magnetic stirrer, electronic balance, filter paper, camera
  • DAB Staining Solution (for Plant Use)

Procedure (For Reference Only)

  1. Sample Preparation: Collect stressed (e.g., by heavy metals) plant seedlings or root tips. Rinse briefly with tap water and place on filter paper to remove excess moisture.

  2. Staining: Immerse the plant seedlings or root tips in the DAB Staining Solution. Stain at room temperature, protected from light, for 2~6 hours, until positive areas develop a dark brown color, while other areas remain nearly colorless or retain the plant's natural color. (Adjust staining time based on plant tenderness and degree of color development.)

  3. Destaining (Chlorophyll Removal): Carefully remove the seedlings or leaves with forceps. Rinse by immersing and agitating in distilled water 3~5 times. Place on filter paper to remove excess water, then immerse in 95% ethanol and treat at 40°C for 3~16 hours. The purpose is to remove the chlorophyll from the seedlings or leaves. Replace with fresh 95% ethanol several times during this process.

  4. Observation and Preservation: Remove the seedlings or leaves with forceps. Rinse by immersing and agitating in distilled water 3~5 times. Place on filter paper to remove excess water. Transfer the sample to an adequate amount of DAB Sample Preservation Solution and soak for 30 minutes. Subsequently, the sample can be removed for photography. The sample can be stored in this preservation solution at room temperature for up to one week.

Notes

  1. Once prepared, the DAB staining working solution should be stored at 4°C, protected from light, and used within one week. Prolonged storage may affect color development.

  2. Since hydrogen peroxide is prone to decomposition and any external factors may stimulate its stress-induced production in plants, plant samples should be freshly collected and stained as soon as possible. It is recommended to include negative and positive control groups.

  3. Photograph the stained samples as soon as possible after staining to preserve the results.

  4. DAB may be carcinogenic. Handle with care and avoid direct contact.

  5. For the staining and destaining steps, the following alternative procedure is also recommended: Place the tissue in the staining solution, apply vacuum to -0.1 MPa, maintain the negative pressure for 20~30 minutes, then let it stain at room temperature for 60 minutes. Discard the staining solution. Add 95% ethanol and destain in a water bath at 70~80°C, changing the 95% ethanol every 10 minutes. Destaining can be stopped once the green color of the sample has completely faded.

  6. For your safety and health, please wear a lab coat and disposable gloves during operation.

  7. Use the reagents as soon as possible after opening to avoid affecting subsequent experimental results.

  8. Recommended DAB Staining Solution Product Numbers:

    • D1509200 DAB Staining Solution (1.0 mg/mL, pH 3.8, for Plant Use)

    • D1509202 DAB Staining Solution (1.0 mg/mL, pH 5.5, for Plant Use)

    • D1509203 DAB Staining Solution (2.0 mg/mL, pH 3.8, for Plant Use)

仕様

同義語
Plant Section Preservation Solution (Post-DAB Staining)
仕様と純度
BioReagent,for microscopy,Biological Stain
安定性と保管
Store at room temperature long term (12 months).
保管条件
Room temperature
入荷
Normal
等級
Biological Stain, BioReagent, 顕微鏡用
Product Line
生物製品

詳細データ

証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate Type日付商品
ZJ26F0434133ZJ26F0434133Certificate of AnalysisApr 13, 2026 D1511471
よくある質問と記事
ソリューション計算機
レビュー

顧客レビュー

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.