E. coli/Coliform Chromogenic Medium - BioReagent

Cat. No.: E1528743
注文可能
グレード&純度 BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Store at 2-8°C
Shipped In
Wet ice
★
サイズ
USA
ドイツ (EU)*
価格
個数
46.3g
E1528743-46.3g
受注生産 · 8~12週間
$479.90
Enter a quantity for the sizes you want to add.

概要

For simultaneous rapid detection of Escherichia coli and coliforms; results within 24 hours; Escherichia coli appears purple, coliforms appear orange-red

仕様

仕様と純度
BioReagent
保管条件
Store at 2-8°C
入荷
Wet ice
この製品は冷冷この冷このこの製品の運送が必要です。地上およびその他の経済サービスは利用できません。
等級
BioReagent
Product Line
生物製品

詳細データ

証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
ソリューション計算機
レビュー

顧客レビュー

Application Protocols

Item-specific protocols

  • Not specified for this item; refer to CoA/Spec Sheet.

General workflow guidance (for context only; not product-specific instructions)

  • Sample processing: prepare representative aliquots; for water testing, consider membrane filtration (e.g., 100 mL) and place filter on medium; for food testing, prepare homogenates and appropriate dilutions.
  • Incubation: typical literature ranges are 18–24 h at 35–37 °C (total coliforms) or method-specific elevated temperatures for E. coli confirmation. Exact incubation parameters for this item are not specified.
  • Controls: include known positive and negative strains to verify selectivity and chromogenic response.
  • Interpretation: follow laboratory SOPs; colony color and morphology guide presumptive identification, followed by confirmatory tests.

Reminder

  • For regulated or validated testing, only follow officially specified methods and use the exact media and conditions required. This product is for research use only.
Biological Roles

General biological context (literature/general knowledge)

  • Indicator organisms: Total coliforms (lactose-fermenting, Gram-negative rods) and Escherichia coli are widely used as indicators of sanitary quality in water and food microbiology.
  • Enzymatic markers: Many chromogenic media differentiate organisms by detecting enzymatic activities—commonly β-galactosidase (coliforms) and β-glucuronidase (E. coli). Enzyme-mediated cleavage of chromogenic substrates yields colored products that localize to colonies.
  • Selective pressure: Bile salts, detergents, or antibiotics are often incorporated to suppress Gram-positive bacteria or non-target Gram-negatives, enhancing selectivity for coliforms. Specific selective agents for this item are not specified.

How the medium functions (conceptual overview)

  • Nutrient base: Provides carbon, nitrogen, vitamins, and minerals to support growth of Enterobacteriaceae.
  • Buffering: Maintains near-neutral pH during incubation to preserve enzyme activity and reliable chromogenic readouts.
  • Differentiation: Distinct chromogens provide visually separable colony colors for target vs non-target organisms under standard incubation conditions.

Limitations and controls

  • A minority of E. coli strains can be β-glucuronidase negative; likewise, some non-E. coli organisms may express β-glucuronidase. Confirmatory tests (e.g., oxidase, indole, IMViC, MALDI-TOF) are recommended for critical work.

Item-specific note

  • This product’s precise biological performance characteristics are not specified; consult CoA/Spec Sheet and validate with reference strains under your lab’s conditions.
Buffer Applications

Not typically applicable.

Notes (general)

  • While most culture media contain buffering systems (e.g., phosphates) to maintain pH during microbial growth, they are not used as defined laboratory buffers for titrations, enzymology, or electrophoresis.
  • For applications requiring controlled pH buffering without nutrients or selective agents, use defined buffer systems (e.g., phosphate, Tris, HEPES) prepared to the desired pH and ionic strength.
Green Alternatives

Context

  • Microbiological media are water-based and generally align with safer solvent principles. Environmental considerations focus on resource use, waste minimization, and energy consumption during sterilization and disposal.

Greener practice suggestions (general guidance)

  • Media format selection: Dehydrated media reduce shipping weight/volume and packaging compared with ready-to-use plates or broths, lowering transport footprint. The specific format of this item is not specified.
  • Sterilization efficiency: Optimize autoclave loading and cycles to reduce energy use while meeting sterility assurance levels. Consider validated lower-temperature cycles if compatible with chromogens (item-specific compatibility not specified).
  • Waste reduction: Batch-prep only the volume required; use smaller pour volumes where method allows to minimize plate waste. Consolidate biohazard autoclave runs.
  • Safer disposals: Neutralize bleach solutions before drain disposal when permitted; segregate plastic types for recycling where decontamination is feasible and permitted by policy.
  • Supplier documentation: Utilize CoA/SDS to verify shelf-life and storage, minimizing expired waste.

Comparison (general)

  • Indicator media alternatives include fluorogenic or enzymatic assays in microplates that can reduce solid-waste generation. Tradeoffs include instrumentation requirements and potential changes in sensitivity/specificity.

Note

  • No item-specific environmental certifications or eco-labels are provided. For detailed life-cycle impacts or format-specific recommendations, consult the product documentation.
Pharmaceutical Uses

Not intended for therapeutic or clinical diagnostic use. For research use only (per Product Data).

General relevance (literature/general knowledge)

  • In pharmaceutical quality control laboratories, chromogenic coliform media can be used for hygiene monitoring, water system testing, and non-sterile product bioburden assessments in research or method development contexts. Official compendial methods specify particular media/formulations; compliance requires using the exact listed media and conditions.

Item-specific note

  • No pharmacopeial listing, compendial alignment, or excipient role is specified for this item. For regulated applications, verify suitability through method validation and consult the CoA/Spec Sheet and SDS.
Physical Properties

Item-specific facts (from Product Data)

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Other physical constants (pH, osmolality, moisture content, etc.): Not specified for this item; refer to CoA/Spec Sheet.

General expectations for chromogenic coliform media (literature/general knowledge)

  • Supplied form: often as a dehydrated powder for reconstitution or as ready-to-use plates/broth; exact form for this item is not specified.
  • pH (at 25 °C): commonly near neutral (e.g., ~7.0 ± 0.2 in literature) to support Enterobacteriaceae growth; exact value not specified for this item.
  • Solubility: dehydrated media are water-soluble upon heating/stirring; chromogenic substrates can have limited solubility and may require gentle warming. Not a specification for this item.
  • Stability: chromogenic substrates are generally light-sensitive; mixtures are typically protected from light and moisture. Specific stability data for this item are not specified.

Important caution on specifications

  • Do not infer exact pH, concentration, or performance characteristics from literature norms. For precise parameters (pH after reconstitution, fill weights, plate volume, colony coloration expectations, etc.), consult the CoA/Spec Sheet for this specific lot/product.
Quality and Grades

Item-specific facts (from Product Data)

  • Grade/Purity: BioReagent.

What BioReagent grade typically signifies (general guidance)

  • BioReagent grade products are intended for biological and biochemical laboratory use, emphasizing low levels of impurities that could interfere with microbial growth, enzyme activity, or detection readouts. For chromogenic media, this includes careful control of background color/fluorescence, nutrient quality, and selective agent performance.
  • Batch-to-batch control generally covers pH after reconstitution, sterility (for sterile formats), growth promotion and selectivity testing with appropriate controls, and chromogenic response of target organisms. Item-specific QC metrics for this product are not specified; refer to CoA/Spec Sheet.

Stabilizers and additives

  • Any stabilizers, defoamers, or antimicrobial preservatives used in dehydrated or ready-to-use formats can influence performance and shelf-life. Not specified for this item; refer to CoA/Spec Sheet.

Practical implications for users

  • Expect consistent colony morphology and color development when following the manufacturer’s preparation/incubation instructions. Verify each new lot with in-house positive/negative controls (e.g., known E. coli and non-coliform strains) to confirm selectivity and chromogenic response.
  • Documentation: Retain lot-specific CoA and SDS, which define acceptance criteria and storage/expiry dating for the supplied format.
Reaction and Applications

This section is not focused on chemical synthesis for this product.

Practical laboratory applications (general knowledge, applicable to chromogenic coliform media)

  • Selective and differential cultivation: Designed to promote growth of coliform bacteria while inhibiting non-target organisms. Differentiation is typically achieved via chromogenic substrates cleaved by marker enzymes (e.g., β-galactosidase for coliforms; β-glucuronidase for many E. coli strains), producing distinct colony colors. Item-specific substrates and colors are not specified.
  • Water and food testing workflows: Commonly used in quality control labs for presence/absence or enumeration testing of coliforms/E. coli in potable water, wastewater, dairy, and food samples. For research use only per product data; not for clinical diagnostics.
  • Environmental microbiology: Source-tracking and microbial community assessments where indicator organisms are needed.

Methodological tips (general)

  • Include positive and negative control strains to verify selectivity and chromogenic response for each new lot.
  • Follow recommended incubation temperatures and times for target organisms (literature: 35–37 °C for total coliforms; up to ~44–45 °C for thermotolerant E. coli in specific methods). Exact conditions for this item are not specified.
  • High background flora may require pre-enrichment or selective pre-treatment; confirm compatibility with the medium’s selective agents.

Note: Item-specific performance claims, detection limits, incubation parameters, and chromogenic endpoints are not specified for this product; consult CoA/Spec Sheet.

Reaction Conditions

Not applicable to chemical reactions.

Microbiological incubation parameters (general literature guidance; not item-specific specifications)

  • Inoculation: spread plate, membrane filtration onto plates, or direct broth inoculation.
  • Incubation temperature/time: literature commonly uses 35–37 °C for total coliforms and, in certain methods, ~44–45 °C for thermotolerant E. coli, for 18–24 h. Exact conditions for this item are not specified.
  • Atmosphere: aerobic incubation; standard ambient CO2.
  • Readout: colony color development or broth color change as per chromogen(s) used. Specific chromogens and expected colors for this item are not specified.

Important

  • For this product, validated incubation conditions, read windows, and acceptance criteria are not specified; refer to CoA/Spec Sheet or the product insert.
Safety and Handling

Item-specific facts (from Product Data)

  • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to SDS.
  • Storage conditions: Store at 2–8 °C. Protect quality by minimizing repeated temperature cycling.
  • Shipping: Shipped on wet ice.

General safety guidance (literature/general knowledge; defer to SDS for authoritative instructions)

  • PPE: laboratory coat, gloves (nitrile or equivalent), and safety glasses. Handle under clean microbiological practices to avoid environmental contamination.
  • Biohazard considerations: When used to culture environmental or clinical isolates, plates/broth become biohazardous. Dispose of spent media and plates as biohazard waste after appropriate decontamination (e.g., autoclave 121 °C, 15–20 min) per institutional policy.
  • Incompatibilities: Avoid strong oxidizers and acids/bases that can degrade nutrients or chromogenic substrates. Avoid desiccation of prepared plates and exposure to direct light, which may fade chromogens.
  • First aid (general): In case of skin or eye contact, rinse with water. If inhaled (powder), move to fresh air. If ingested, rinse mouth with water. Seek medical attention as needed. Consult SDS for detailed measures.
  • Spill response: For powder, avoid dust generation; for liquid/plates, absorb with suitable material. Decontaminate area with appropriate disinfectant (e.g., 70% ethanol, freshly prepared bleach) and/or autoclave waste.

Note

  • Always consult the product’s SDS and your institutional biosafety guidelines for definitive handling and disposal procedures.
Solvent Selection

Not typically applicable to formulated microbiological media.

General notes (literature/general knowledge)

  • Reconstitution, when applicable, is performed with high-purity water (e.g., distilled or deionized). For autoclave-sterilized media, prevent caramelization or component degradation by following recommended heating profiles. Some chromogenic substrates are heat-labile and may be filter-sterilized separately in certain formulations; item-specific instructions are not provided for this product.
  • Avoid organic solvents unless explicitly directed in the product’s preparation guide, as they can inhibit microbial growth or alter chromogen performance.

For this item

  • Specific reconstitution volumes, sterilization steps, and any solvent co-additives are not specified for this item; refer to CoA/Spec Sheet or preparation insert.
Storage and Reconstitution

Item-specific facts (from Product Data)

  • Storage conditions: Store at 2–8 °C.
  • Shipping: Shipped on wet ice.

Item-specific details not provided

  • Reconstitution instructions, volumes, sterilization, and plating procedures: Not specified for this item; refer to CoA/Spec Sheet.
  • Shelf-life/expiry and light sensitivity: Not specified for this item; refer to product label/CoA.

General guidance (literature/general knowledge)

  • Protect from moisture and light; keep container tightly closed. If supplied as dehydrated powder, equilibrate to room temperature before opening to minimize condensation. If supplied as ready-to-use plates, keep sealed in original packaging to prevent desiccation and store agar side up.
  • Water quality: Use freshly prepared, deionized/distilled water for reconstitution. Adjust to the manufacturer’s target pH at the specified temperature if directions require it (not specified for this item).
  • Sterilization: Some chromogenic substrates are heat-labile and may require post-sterilization aseptic addition; follow manufacturer instructions (not specified here). Avoid prolonged autoclaving to limit nutrient/chromogen degradation.
  • Use-by: Prepare only the quantity needed. Label with prep date and lot/traceability details. Discard if contamination, dehydration, or color change is observed.

Always consult the product’s CoA/Spec Sheet and SDS for definitive handling, preparation, and storage instructions.

Structure and Identity

Item-specific facts (from Product Data)

  • Product: E. coli/Coliform Chromogenic Medium (SKU: E1528743)
  • Grade: BioReagent
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES / InChI / InChIKey: Not applicable for complex, multi-component media; not specified for this item.

General description (literature/general knowledge)

  • This product is a complex, multi-component microbiological growth medium formulated to selectively grow and differentiate coliforms and E. coli using chromogenic substrates.
  • Typical functional components in such media include: peptones/yeast extracts (nutrients), buffering salts (pH control), selective agents (to suppress non-target flora), and chromogenic substrates that report key enzymatic activities (e.g., β-galactosidase for coliforms, β-glucuronidase for E. coli).
  • Structural features (conceptual): contains small-molecule chromogens bearing glycosidic or analogous enzyme-cleavable linkages; upon enzymatic cleavage, the aglycone forms a colored, insoluble or soluble dye localized to colonies.

Notes

  • Because the material is a formulated mixture, single-structure identifiers (SMILES, InChI) are not applicable. Any specific composition, enzyme substrates, or inhibitor identities are not specified for this item; consult the product CoA/Spec Sheet for exact formulation details.
Synthetic Utility

Not applicable.

Explanation

  • This product is a complex microbiological medium formulated for selective/differential cultivation and detection of coliforms and E. coli via chromogenic responses. It is not used as a reagent or building block in chemical synthesis and does not have defined functional groups or stoichiometric roles relevant to synthetic chemistry.
Target Specificity

Item-specific note (from Product Name)

  • Intended use context: E. coli/Coliform Chromogenic Medium—implying use in the growth and chromogenic differentiation of E. coli and other coliform bacteria. No further item-specific performance characteristics are provided.

Restrictions

  • No detailed target panel, inclusivity/exclusivity data, or organism lists are specified for this item. Consult CoA/Spec Sheet for any validated strains or performance testing results relevant to this product.

グレードの選択でお困りですか?

当社のグレード選定ガイドでは、カタログ内のすべてのバリエーションについて、純度、安定剤の状態、用途への適合性を網羅しています。

BioReagent グレードガイドを見る →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.