BioReagent BioReagent ベースライン干渉を最小限に抑える必要がある、感度の高いクロマトグラフィーおよび分析ワークフロー向け。
Room temperature Normal に出荷。正確な仕様については、ロット固有の COA をご確認ください。
SDS、COA、データシート、仕様書をダウンロードできます。ロット固有の COA はロット番号検索で入手可能です。
クロマトグラフィー、有機合成、クロスカップリング反応に関する 0 件の査読済み論文で引用されています。
When certain tissues contain bone substance or calcified lesions during tissue sectioning, calcium-containing tissues cannot be directly embedded in paraffin for sectioning. This is attributed to the density difference between calcium and paraffin, which makes it difficult to obtain intact sections.For calcium-containing tissues, decalcification is preferably performed after fixation, or fixation and decalcification may be carried out simultaneously, followed by subsequent procedures including dehydration, clearing, wax impregnation, embedding and sectioning.
A variety of decalcifying reagents are available, including organic acids, inorganic acids, ethylenediaminetetraacetic acid (EDTA) and electrolytic decalcification methods. Among organic acids, formic acid and acetic acid are suitable for decalcification of bone marrow tissues.
Electrolytic Decalcifying Solution is mainly composed of formic acid and dilute acid.Advantages: ① Rapid decalcification speed; ② Applicable to decalcification of most types of tissues.
Disadvantages: ① It may cause certain damage to tissues; ② Alkali treatment with sodium sulfate solution is required after decalcification.This reagent is intended solely for scientific research and shall not be used for clinical diagnosis or other purposes.
Materials to be Prepared by User：
1. PBS
2. Distilled water
3. Thermostatic water bath
4. 5% Sodium Sulfate Solution
Operating Procedures (For Reference Only)：
1. When decalcifying bone tissues, the sampled tissue should not be too thick, with a recommended thickness of approximately 5 mm.
2. After tissue fixation, rinse the sample with PBS 3 times, 20 minutes each time.
3. Rinse the tissue with distilled water 3 times, 20 minutes each time.
4. Assemble the electrolytic device: Take a platinum wire, wrap one end of the wire around the specimen and place it on one side of the container bottom, then connect the other end of the platinum wire to the positive electrode of the power supply. On the opposite side of the container, insert the lower end of a steel sheet or carbon rod into the solution, and connect its upper part to the negative electrode of the power supply. Place an insulated organic glass plate between the positive and negative electrodes to prevent electrical conduction caused by electrode contact.
5. Add 150～200 mL Electrolytic Decalcification Solution and place the container in a thermostatic water bath at 37～45 ℃. A 6 V direct current power supply is generally used; the voltage can be adjusted to 8～10 V if a rectifier is equipped. Electrolysis normally lasts 10 minutes to 3 hours, and the duration can be extended to 6～8 hours for compact bone.
6. Rinse the sample with running tap water for several hours.
7. Perform alkali treatment by immersing the sample in 5% Sodium Sulfate Solution.
8. Conduct routine dehydration and embedding.
Precautions：
1. For bone tissue blocks with a thickness of 5 mm, the decalcification period is generally 10 min to 3 h.
2. Complete decalcification is required to avoid insufficient or excessive decalcification. The decalcification degree shall be controlled to ensure no adverse impact on tissue sectioning while minimizing decalcification duration, so as to prevent tissue damage caused by overlong decalcification.
3. Bone tissue shall be fixed prior to decalcification, or fixation and decalcification shall be conducted concurrently. Decalcification before fixation is prohibited to reduce tissue damage.
4. Check the decalcification progress at regular intervals. Excessive decalcification will aggravate tissue damage and compromise staining results.
5. Wear a lab coat and disposable gloves during operation for personal safety and health.
危険性、取扱い、保管、および規制遵守を網羅した包括的な文書。
<<<<<<< HEAD SDS をダウンロード → ======= SDS をダウンロード → >>>>>>> release248-p3Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | 日付 | 商品 |
|---|---|---|---|
 ZJ26F0939209 | Certificate of Analysis | Sep 15, 2026 | E1525467 |
当社のグレード選定ガイドでは、カタログ内のすべてのバリエーションについて、純度、安定剤の状態、用途への適合性を網羅しています。
BioReagent グレードガイドを見る →
