HO-PEG8-Propionic acid

Cat. No.: H487705
注文可能
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
サイズ
USA
ドイツ (EU)*
価格
個数
1g
H487705-1g
受注生産 · 8~12週間

$1,255.90

$1,465.90
保存 $210.00 (14.33%)
Enter a quantity for the sizes you want to add.

概要

Description

Applications may include: bioconjugation, drug delivery, PEG hydrogel, crosslinker, and surface functionalization

仕様

法的情報
保管条件
Store at -20°C
入荷
Ice chest + Ice pads
この製品は冷冷この冷このこの製品の運送が必要です。地上およびその他の経済サービスは利用できません。

詳細データ

証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
安全と危険(GHS)
信号
Warning
危険表示

H315:Causes skin irritation

H319:Causes serious eye irritation

注意表示

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

ソリューション計算機
レビュー

顧客レビュー

Application Protocols

No vendor-validated biological assay protocols are provided for this item. Typical research workflows (general guidance):

  • Surface coupling via carboxyl end (EDC/NHS): Clean and amine-functionalize surface → activate PEG carboxyl in MES buffer (pH ~5.5) → couple at pH 7.5–8.5 → rinse and block unreacted sites.
  • Polymer conjugation (amide formation): Dissolve PEG acid and amine-bearing polymer in DMF/DMSO → add EDC/HOBt or DIC/HOAt → stir RT → precipitate polymer into ether/MTBE; wash and dry.
  • Hydroxyl-end activation to carbonate: React with CDI in anhydrous solvent → purify (precipitation/chromatography) → couple to amines (urethane formation) in dry conditions.

Parameters (stoichiometries, times, temperatures) should be optimized empirically. For any bio-related workflow, avoid amine-containing buffers during activation and verify compatibility of co-solvents with the target substrate.

Biological Roles

Item-specific biological/biochemical activity: Not applicable; this is a synthetic PEG linker for research/materials use, not a biological molecule.

General context (literature):

  • Poly(ethylene glycol) chains are widely used to impart “stealth” and hydration layers to surfaces, reducing protein adsorption and cell adhesion through steric repulsion and water structuring.
  • Carboxyl-terminated PEGs enable covalent attachment to amine-bearing biomolecules or surfaces under mild conditions, forming amide bonds while preserving biomolecule integrity (when used in compatible buffers/conditions).
  • The PEG8 length offers an intermediate spacer distance: long enough to project functional groups away from a surface for accessibility, yet short enough to limit excessive flexibility that can reduce ligand presentation density.
  • In aqueous environments, PEG adopts dynamic, solvated conformations; end-group ionization (carboxylate at neutral/basic pH) can modulate local charge and interactions.

Note: Any discussion of physiological effects or therapeutic use would be out of scope; this product is for research use only.

Buffer Applications

This material is not a buffering reagent. However, its carboxyl terminus is commonly activated and coupled in buffered media. Practical guidance (general/literature):

  • Preferred buffers for EDC/NHS coupling: MES (pH 4.7–6.0) or acetate buffer (pH 4.5–5.5). Maintain pH near 5.0–5.5 to favor O-acylisourea formation and NHS-ester stability while limiting hydrolysis.
  • Avoid buffers containing primary amines (e.g., Tris, glycine) during activation, as they compete with the intended amine target.
  • For subsequent amidation, adjust to pH 7.5–8.5 (e.g., phosphate, HEPES, or bicarbonate) after forming an NHS ester; this promotes nucleophilic attack by the amine.
  • Solubility aids: Up to 10–20% DMF or DMSO can be included to dissolve hydrophobic partners; verify compatibility with biomolecules/surfaces.
  • Ionic strength: Moderate salt (e.g., 100–150 mM NaCl) can reduce nonspecific electrostatic interactions during conjugation workflows.

Recipes and concentrations are application-dependent; confirm optimal conditions empirically for your substrate and maintain stoichiometry based on the acid value of the PEG reagent.

Green Alternatives

Sustainability considerations for PEG-based linkers (general):

  • Solvent choices strongly impact greenness; the core PEG linker is relatively benign but synthesis/coupling often relies on hazardous solvents and coupling agents.

Greener choices (literature/practice):

  • Solvents:
    • Replace DMF/NMP with ethanol, water, or 2-MeTHF/EtOAc where feasible. Aqueous EDC/NHS couplings in MES buffer (pH ~5.0–6.0) can be effective for amide formation.
    • Use CPME or 2-MeTHF instead of THF/DCM for non-aqueous esterifications when solubility allows.
  • Coupling reagents:
    • Prefer water-soluble carbodiimide (EDC) over DCC to avoid DCU waste; use catalytic NHS to form stable intermediates in water-rich media.
    • Explore enzyme-catalyzed esterifications (lipases) in green solvents for certain transformations.
  • Workup/purification:
    • Precipitation and membrane-based purification (dialysis/ultrafiltration) can reduce chromatographic solvent waste.
  • Energy:
    • Conduct reactions at ambient temperature when possible; PEG chemistry often proceeds without heating.

Trade-offs:

  • Greener solvents may reduce solubility of reactants, requiring co-solvents or longer reaction times.
  • EDC in water can hydrolyze; balancing buffer pH and reagent stoichiometry is essential to maintain efficiency while minimizing waste.

Comparison snapshot (general):

  • DMF/NMP (excellent solubility, toxic/reprotoxic) vs Water/MES (benign, sometimes slower, limited solubility for hydrophobes).
  • DCC/DCM (efficient, generates DCU/halogenated waste) vs EDC/water (greener, sensitive to pH/hydrolysis).
Pharmaceutical Uses

No therapeutic/clinical claims are made for this product. It is for research use only.

Formulation/manufacturing context (general):

  • PEGylated linkers are used in R&D for device coatings, diagnostic surface passivation, and prototype drug-delivery materials to improve hydrophilicity and reduce nonspecific adsorption.
  • Carboxyl-terminated PEGs serve as intermediates to prepare activated esters (e.g., NHS esters) or amides/urethanes that can be further formulated into hydrogels, nanoparticles, or surface treatments in development stages.
  • Regulatory status/pharmacopeia: Not specified for this item; PEG as a class appears in pharmacopeias, but heterobifunctional PEG oligomers are typically specialty research reagents. Consult project-specific regulatory guidance.
  • Extractables/leachables: For any device/prototype work, assess residual solvents, low-MW PEG fractions, and coupling reagent byproducts; perform project-specific risk assessments.

Any use in manufacture of finished pharmaceuticals requires appropriate qualification; this listing provides no such certification.

Physical Properties

Item-specific values (this product):

  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight (average Mn): Not specified for this item; refer to CoA/Spec Sheet.
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics for PEG8-based HO/CO2H oligomers:

  • Physical state: typically low-melting waxy solid or viscous syrup depending on Mn and end groups.
  • Solubility (literature):
    • Highly soluble in water and polar protic solvents (MeOH, EtOH).
    • Readily soluble in polar aprotic solvents (DMSO, DMF, NMP, acetonitrile).
    • Limited solubility in nonpolar solvents (hexanes, toluene); solubility can improve with slight heating or co-solvents.
  • Partitioning: PEG segments are hydrophilic; carboxylic acid end can be deprotonated (pH > pKa) to enhance aqueous solubility.
  • Acid pKa (aliphatic carboxyl, literature): typically ~4–5 for propionic acid termini; local microenvironment within PEG may shift apparent pKa slightly.
  • Hygroscopicity: PEG oligomers may absorb atmospheric moisture.
  • Viscosity: increases with concentration and decreases with temperature; relevant for solution handling.

Optical/refractive data, density, melting/boiling points, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet. Do not treat any general values as specifications for this SKU.

Quality and Grades

Item-specific grade/purity for this SKU: Not specified for this item; refer to CoA/Spec Sheet.

Interpretation and considerations for PEG linkers (general):

  • Average molecular weight and polydispersity (Ð = Mw/Mn) strongly influence performance in materials functionalization and conjugation. Vendors often specify an average repeat count (e.g., PEG8) with a narrow distribution; check CoA for Mn and Ð.
  • End-group fidelity: Verify acid value (meq/g), hydroxyl number, and residual starting end-groups. High end-group conversion ensures predictable coupling.
  • Residuals: For coupling-grade materials, limits on residual solvents (e.g., DMF, DCM), catalysts (e.g., stannous octoate), and inorganic salts are relevant. Confirm by GC/LC/ICP as applicable on CoA.
  • Water content/peroxides/UV cutoff/metal limits: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers: Not specified for this item; if present, they may affect downstream reactions (e.g., hindered phenols can quench radicals). Review CoA.

Selecting grade for application (guidance):

  • Surface grafting and polymer synthesis: prioritize narrow Ð and high end-group integrity.
  • Bioconjugation R&D: prefer coupling-grade with low bioburden/endotoxin (if offered) and documented acid number.
  • Analytical confirmation: 1H/13C NMR (end-group signals), MALDI/ESI-MS for Mn, FTIR for –OH/–COOH, titration for acid value.
Reaction and Applications

This heterobifunctional PEG (HO- … –CO2H) is a versatile hydrophilic spacer/linker in materials and surface chemistry. Typical research applications (general, based on functionality):

  • Amide coupling via the carboxyl terminus:
    • EDC/NHS or DIC/HOAt/HOBt-mediated activation for conjugation to primary amines on surfaces, polymers, or ligands.
    • Formation of stable amide linkages that improve water compatibility and reduce nonspecific adsorption.
  • Esterification of the carboxyl end to graft onto hydroxylated substrates (e.g., polyols, inorganic hydroxylated surfaces after appropriate priming) using DCC/DMAP or Steglich conditions.
  • Hydroxyl-end derivatization:
    • Activation to p-nitrophenyl or succinimidyl carbonate for subsequent coupling to amines (urethane formation).
    • Conversion to tosylate/mesylate, enabling substitution (e.g., azidation → click chemistry after further alkyne introduction).
  • Surface passivation and spacing:
    • Fabrication of PEGylated monolayers/brushes to minimize protein fouling (materials science focus).
    • Spacer in nanoparticle and hydrogel functionalization, where PEG8 length (~3–4 nm contour, literature) balances flexibility and spacing.
  • Polymer-analogous modifications:
    • Chain extension, star-polymer synthesis, or block copolymer formation by selective end-group reactions.

Practical tips:

  • Keep reactions dry when using carbodiimides/acid chlorides; PEG absorbs moisture.
  • Control equivalents based on acid value or 1H NMR to account for polydispersity.
  • Purify by precipitation into cold ethers or by dialysis (MWCO chosen relative to Mn) when appropriate.
Reaction Conditions

General literature guidance for common transformations with HO–PEG8–(propionic acid):

  • EDC/NHS amide coupling (aqueous):
    • Solvent: MES buffer (50–100 mM), pH 5.0–5.5; optional 5–20% DMF for solubility.
    • Reagents: 1.1–1.5 eq EDC, 1.1–2.0 eq NHS relative to carboxyl groups.
    • Temperature/time: 20–25°C, 15–60 min activation; then add amine (pH 7.5–8.5) and react 1–4 h.
    • Notes: Control pH carefully; remove excess reagents by dialysis or precipitation.
  • DCC/DMAP esterification (organic):
    • Solvent: dry DCM, THF, or EtOAc.
    • Reagents: 1.1–1.5 eq DCC, catalytic DMAP (0.05–0.2 eq), alcohol (1.2–2 eq).
    • Temperature/time: 0°C to RT, 2–16 h.
    • Notes: Filter DCU precipitate; avoid over-activation that may lead to PEG chain scission.
  • Hydroxyl activation to p-nitrophenyl carbonate:
    • Solvent: dry DCM/MeCN.
    • Reagents: p-nitrophenyl chloroformate (1.2–1.5 eq), base (pyridine/Et3N, 1.5–2 eq).
    • Temperature/time: 0°C to RT, 1–3 h.
    • Notes: Protect from moisture; confirm activation by UV (pNP release in test reaction).
  • Tosylation of terminal –OH:
    • Solvent: dry DCM or pyridine.
    • Reagents: TsCl (1.2 eq), base (pyridine or Et3N, 2 eq), catalytic DMAP.
    • Temperature/time: 0–5°C addition, then RT 2–6 h.
    • Notes: Subsequent displacement with NaN3 in DMF (60–80°C) affords azide-PEG for click workflows.

Yields depend on substrate and purification; values are project-specific and not specified for this item.

Safety and Handling

Item-specific GHS/SDS data:

  • Signal word, H-statements, GHS classification, pictograms: Not specified for this item; refer to the product SDS.

General safety guidance for PEG-based carboxylic acids (literature/practice):

  • Hazards: Typically low volatility; may cause skin/eye irritation. Carboxylic acids can be irritants, especially in concentrated solutions. PEGs are generally considered low acute toxicity in lab handling, but avoid ingestion/inhalation.
  • PPE: Use lab coat, safety glasses or face shield, and appropriate chemical-resistant gloves (e.g., nitrile). For weighing viscous/waxy materials, use spatula; avoid aerosolization.
  • Handling: Work in a well-ventilated area. Avoid contact with strong oxidizers and strong bases/acids that may induce degradation or undesired salt formation.
  • Incompatibilities: Strong oxidizing agents; dehydration reagents may induce side reactions. Carbodiimide couplings can form urea byproducts—handle with care.
  • First aid (overview; defer to SDS):
    • Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing; seek medical attention if irritation persists.
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
  • Spill/leak: Absorb with inert material (spill pads, vermiculite). Clean surfaces with water/ethanol. Prevent release to drains without assessment.
  • Thermal decomposition: Heating above typical lab temperatures can cause degradation of PEG backbones to aldehydes/ether fragments; avoid overheating.

Always consult the official SDS for authoritative hazard information.

Solvent Selection

Polarity and miscibility (general/literature for PEG8 carboxylic acids):

  • Highly polar and hydrophilic due to PEG backbone; carboxyl terminus adds ionizable functionality.
  • Miscible/soluble in: water, methanol, ethanol, isopropanol, acetone, acetonitrile, DMSO, DMF, NMP.
  • Limited solubility in: nonpolar hydrocarbons (hexane, heptane) and weakly polar aromatics (toluene); use co-solvents or slight heating.

Choosing solvents by task:

  • Amide coupling (carboxyl terminus): DMF, DMSO, or NMP; for aqueous carbodiimide chemistry, MES or phosphate buffers (avoid primary amines in buffer) with co-solvent (≤20% DMF) if needed.
  • Esterification (carboxyl terminus): dry DCM/THF or DMF with DCC/EDC and catalytic DMAP; for greener options, 2-MeTHF or EtOAc may substitute.
  • End-group activation (hydroxyl terminus): anhydrous DCM/THF/MeCN for tosylation/mesylation or CDI/succinyl carbonate formation.
  • Purification: Precipitation from MTBE/diethyl ether into cold ether-rich media often removes small-molecule reagents; reverse-phase or size-exclusion chromatography is used when needed.

Comparison (general):

  • Water vs DMF: Water is preferred for EDC/NHS activation with water-soluble amines; DMF/DMSO boost solubility for hydrophobic counterparts.
  • THF/2-MeTHF: useful for non-aqueous esterifications; PEG oligomers may be only moderately soluble—test concentration and temperature.
Storage and Reconstitution

Storage (item-specific):

  • Store at −20°C. Shipping: Ice chest + ice pads (per product data).

General handling best practices for PEG linkers:

  • Protect from moisture; store tightly sealed under inert gas or in a desiccator. PEG oligomers can be hygroscopic.
  • Avoid repeated freeze–thaw of bulk material. If frequent use is anticipated, aliquot into dry, airtight containers upon first opening.
  • Light sensitivity: Typically low, but store in amber or opaque containers to minimize any potential photo-induced degradation of activated derivatives.

Reconstitution and solution stability (general):

  • Dissolve in dry solvents (e.g., anhydrous DMSO, DMF, MeOH) or in water/buffer as required by the application. Gentle warming (30–40°C) can aid dissolution of waxy solids.
  • For coupling reactions, prepare fresh solutions to minimize hydrolysis of activated intermediates (e.g., NHS esters, carbonates).
  • Aqueous stock solutions may be stored short-term (hours to a few days) at 2–8°C; for longer storage, freeze at −20°C and protect from moisture. Verify stability empirically.

Always refer to the CoA/SDS for any item-specific stability limits, impurity controls, or recommended storage atmospheres.

Structure and Identity

Item-specific identifiers (SMILES, InChIKey, CAS, formula, exact MW): Not specified for this item; refer to CoA/Spec Sheet.

Overview (general/literature description based on name):

  • The name “HO-PEG8-Propionic acid” denotes a heterobifunctional poly(ethylene glycol) oligomer with approximately eight ethylene glycol repeat units.
  • One terminus is a free hydroxyl (–OH) group; the opposite terminus bears a propionic acid (–(CH2)2–CO2H or –(CH2)3–CO2H spacer terminating in –CO2H). Vendors commonly use a 3-carbon spacer (propionic) linked via an ether to PEG; exact spacer definition for this item is not specified.
  • Structural features (general):
    • Linear PEG chain: –(O–CH2–CH2)8–, conferring hydrophilicity and water solubility.
    • One aliphatic carboxylic acid end for amide/ester coupling chemistry.
    • One primary alcohol end for further derivatization (e.g., tosylation/mesylation, carbonate/ester formation, or activation to succinimidyl carbonate).
  • 2D description in words: A flexible polyether backbone composed of eight repeating ethylene glycol units, capped on one end by a primary hydroxyl and on the other by a short alkyl chain terminating in a carboxylic acid group.

Stereochemistry and rings: None (achiral, acyclic polyether; local conformational flexibility typical of PEG).

Note: Exact end-group definitions, spacer length, and average molecular weight distribution (Ð) are item-specific quality attributes; consult the CoA for definitive identity data.

Synthetic Utility

Functional group leverage (general):

  • Carboxylic acid terminus:
    • Amide formation with primary/secondary amines via EDC/NHS (aqueous) or DCC/HOAt/HOBt (organic) conditions.
    • Conversion to acid chlorides (e.g., oxalyl chloride) for subsequent ester/amide synthesis when water intolerance is required.
    • Formation of activated esters (NHS, PFP) enabling one-pot or staged bioconjugation.
  • Hydroxyl terminus:
    • Carbonate formation (CDI; p-NPC) to generate amine-reactive PEGylating agents.
    • Sulfonate ester formation (tosylate/mesylate) permitting SN2 substitution (e.g., azide introduction → CuAAC after alkyne partner installation).
    • Esterification/etherification to anchor PEG onto substrates or extend chains.

Retrosynthetic value:

  • Serves as a hydrophilic spacer between hydrophobic domains, decoupling recognition elements from surfaces and increasing effective molarity in intramolecular designs.
  • PEG8 length balances solubility with manageable viscosity and defined spacing, aiding reproducibility in materials assembly.

Analytical control:

  • Monitor couplings by 1H NMR (disappearance of carboxylic OH/broad –OH signals, appearance of amide/urethane resonances), FTIR (C=O shifts), and MALDI/ESI-MS (Mn shift consistent with derivatization). Titrate residual acid (acid value) to assess conversion.
Target Specificity

Not applicable. This product is a small-molecule/oligomeric PEG linker, not an antibody, enzyme, or affinity reagent. No antigen/epitope specificity, clone, isotype, or species reactivity is associated with this item.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.