グレード&純度BioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
pH gradient buffer is an innovative elution buffer (or mobile phase) that changes pH linearly for separation and purification of mAb antibodies, glycoproteins and PTM modified proteins by ion exchange (IEX) chromatography. In pH gradient buffer-based IEX chromatography, the pH of the initial buffer is kept at a constant level to ensure that the charged proteins bind to oppositely charged ions of the stationary phase. Then, the protein is eluted by linearly changing the pH of the buffer so that the protein has a zero net charge and can elute from the column.
Reagent Composition: Each bottle contains 2.5 mg BT Surfactant, 850 mg NaCl, and 6 g sulfonate.
Resuspension: Dissolve reagents in 500 mL deionized, double-distilled water.
pH Adjustment: At room temperature, use pH meter to ensure the pH error is less than 0.2, and use 2 M NaOH or hydrochloric acid to adjust the pH.
Elution Buffer (mAb): pH Buffer A, pH 5.5
Elution Buffer B (mAb): pH Buffer B, pH 10.2
Linear pH Range: Linear correlation coefficient > 0.99 at pH 5.5 - 10.2 in columns of IEX chromatography.
Reference Procedure of mAb subunit and intact protein:
Column: SCX, 10 μm, 2.1 * 250 mm or 2.1 * 50 mm
Flow rate: 0.3 mL/min
Eluent A: 1×mAb pH buffer A (pH 5.5)
Eluent B: 1× mAb pH Buffer B (pH 10.2)
Gradient: 0 - 1 min, 0% B; 1 - 31 min, 0 - 100% B; 31 - 34 min, 100% B; 34 - 40 min, 0% B
Temperature: 30 °C
FLR detection: Ex: 280 nm, Em: 360 nm
UV detection: 280 nm
Load: 0.2 - 10 μg
Inject volume: 4 μL
仕様
仕様と純度
BioReagent
保管条件
Store at -20°C
入荷
Ice chest + Ice pads
この製品は冷冷この冷このこの製品の運送が必要です。地上およびその他の経済サービスは利用できません。
等級
BioReagent
Product Line
生物製品
詳細データ
証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
ソリューション計算機
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
レビュー
顧客レビュー
よくある質問
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.