Modified DG-18 Agar Base - BioReagent

Cat. No.: M1528643
注文可能
グレード&純度 BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
サイズ
USA
ドイツ (EU)*
価格
個数
250g
M1528643-250g
受注生産 · 8~12週間
$189.90
Enter a quantity for the sizes you want to add.

概要

For enumeration of molds and yeasts; add 220 g of glycerol per liter of medium

仕様

仕様と純度
BioReagent
保管条件
Room temperature
入荷
Normal
等級
BioReagent
Product Line
生物製品

詳細データ

証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
ソリューション計算機
レビュー

顧客レビュー

Application Protocols

Item-specific validated protocols are not provided. General, literature-style workflow for enumeration on DG-type media:

  1. Sample prep: Homogenize sample in appropriate diluent (e.g., buffered peptone water or other matrix-specified diluent). Prepare serial tenfold dilutions.
  2. Plate prep: Pour plates with prepared medium and allow surface to dry (e.g., 30–60 min in sterile conditions) to minimize spreading.
  3. Inoculation: Spread 0.1 mL of selected dilutions onto plate surfaces (spread-plate) or use pour plate method per method requirements.
  4. Incubation: Invert plates and incubate at the temperature/time specified by your method (commonly 25–30 °C for 3–7 days).
  5. Enumeration: Select plates with 10–150 colonies; count colonies and calculate CFU/g or CFU/mL considering dilution factor and plated volume.
  6. Confirmation: Examine colony morphology; subculture as needed for identification. Note: Adjust steps to match ISO/industry or internal SOPs. This product is for research use only.
Biological Roles

Modified DG-18 Agar Base does not have a single biological role as a molecule; instead, as a complex medium it establishes environmental conditions that select for xerophilic and osmotolerant fungi. • Functional roles in culture (literature, general for DG-type media):

  • Reduced water activity via osmotic modifiers favors growth of xerophiles while inhibiting many bacteria and fast-growing molds.
  • Dichloran constrains radial growth of spreading fungi, yielding discrete colonies suitable for enumeration.
  • Peptones/yeast extracts provide amino acids, peptides, and vitamins that support fungal metabolism and sporulation for identification.
  • Agar supplies a firm matrix enabling colony isolation and morphology assessment. • Microbial targets (typical): Xerophilic species (e.g., some Aspergillus, Penicillium, Eurotium/Aspergillus sect.); exact recovery spectrum depends on formulation and incubation parameters. • Application context: Food and environmental microbiology—enumeration and isolation rather than enrichment of fastidious organisms. Not for clinical diagnostics. • Performance factors: Water activity, pH, incubation temperature/time, plate surface dryness, and sample pre‑treatment (dilution buffers, surfactants) influence selectivity and colony morphology. This product is intended for research and laboratory use only and should be deployed within validated microbiological methods.
Buffer Applications

Not applicable. Modified DG-18 Agar Base is a complete culture medium base rather than a buffering reagent. While prepared media possess a defined pH, the product is not used to formulate laboratory buffer systems. For practical guidance, see Storage & Reconstitution and Reaction & Applications.

Green Alternatives

Green chemistry considerations are limited for dehydrated culture media, which are water-based and used at modest concentrations. • Potential improvements (general):

  • Use energy-efficient autoclave cycles validated for media volumes to reduce energy and water consumption.
  • Prepare only the amount of plates needed to minimize waste; store plates appropriately to extend usability and reduce discard rates.
  • Consider reusable glassware for media preparation to reduce single‑use plastics. • Alternative media: Depending on sample matrix and target organisms, alternatives like Sabouraud Dextrose Agar with antibiotics or Rose Bengal Chloramphenicol Agar may be considered; however, these alter selectivity and are not inherently “greener.” Choice should be driven by method suitability and organism recovery (literature note). • Packaging/waste: Segregate biohazardous plates and autoclave prior to disposal; consult local regulations for composting agar-containing waste—nutrient and inhibitor content may preclude it. Overall, sustainability gains stem from process efficiency rather than substituting the medium with a specific greener chemical.
Pharmaceutical Uses

Direct pharmaceutical formulation/excipient uses are not typical. In pharma/biotech quality control laboratories, DG-type agars may be used in non-clinical environmental or raw-material monitoring to assess fungal bioburden in dry/high-sugar matrices (lab QC context). No therapeutic or clinical diagnostic use is intended or implied. Compendial status (e.g., pharmacopeial monographs) is not specified for this item; refer to CoA/Spec Sheet and your quality system for suitability assessments.

Physical Properties

Item-specific physico-chemical constants are not provided for this complex mixture.

• Form: Dehydrated blend/powder (general for agar media; item-specific appearance not provided). • Solubility: Dispersible in water upon heating; forms a gel on cooling due to agar content (general, literature). • pH (prepared medium): Not specified for this item; refer to CoA/Spec Sheet. (DG-18 media are commonly near neutral–slightly acidic in literature.) • Moisture sensitivity: Dehydrated media are typically hygroscopic; keep container tightly closed to prevent clumping and performance drift (general guidance). • BP/MP, density, refractive index, logP, pKa: Not applicable/Not specified for this heterogeneous medium; refer to CoA/Spec Sheet for any lot-specific details. • Color/clarity (prepared plates): Typically light amber and slightly opalescent after sterilization and pouring (literature, general for DG-type media), but appearance can vary with water quality, autoclave cycle, and supplements. • Sterility: Prepared medium must be sterile; verify via sterility control plate (general best practice).

Quality and Grades

• Grade: BioReagent (item-specific). This denotes suitability for laboratory research applications where consistent biological performance is required. BioReagent-grade media components are produced and packaged to minimize lot-to-lot variability and bioburden. • Performance attributes (general for microbiological media):

  • Growth promotion/inhibition testing against defined fungal challenge strains to confirm selectivity typical of DG-type media (literature practice).
  • Controlled pH and gel strength after preparation.
  • Low background contamination in dehydrated powder. • Stabilizers/antimicrobials: Not specified for this item; refer to CoA/Spec Sheet. • UV cutoff/trace impurities/metals: Not applicable for this application and not specified for this item; refer to CoA/Spec Sheet for any analytical limits. • Documentation: For regulated or QA-controlled labs, retain lot CoA/Spec Sheet and SDS. Record preparation parameters (mass of powder, water volume, sterilization cycle, cooling/pour temperature) for reproducibility. • Shipping/Storage: Shipped under normal conditions (item-specific). Store at room temperature (item-specific). Protect from moisture uptake and microbial contamination of the powder after opening.
Reaction and Applications

This product is not used as a reagent in synthetic organic reactions. Its primary application is microbiological culture of xerophilic and osmotolerant fungi on low–water-activity agar (general for DG‑type media). Practical laboratory applications (literature/guideline-based): • Food microbiology: Enumeration of yeasts and molds in high-sugar or low‑aw foods (dried fruits, confectionery, spices), where reduced aw and dichloran minimize overgrowth and facilitate colony counting. • Environmental monitoring: Recovery of xerotolerant fungi from dry processing environments. • Method frameworks: Commonly referenced in ISO/ICUMSA/US FDA BAM style protocols for fungal counts in foods (literature), often with specified incubation temperatures (e.g., 25–30 °C) and durations (3–7 days), and optional antibiotics to suppress bacteria. • Practical tips:

  • Allow media to cool to ~45–50 °C before pouring plates to reduce condensation (literature practice).
  • Dry plates prior to use to remove surface moisture that can cause colony spreading.
  • Invert plates during incubation to limit condensation drip and colony smearing.
  • Record sample dilution schemes meticulously; DG-type selectivity assists in counting discrete colonies of slow-growing xerophiles. Note: Follow your laboratory’s validated method for the specific matrix and regulatory framework. No medical/clinical use is intended or implied.
Reaction Conditions

Not applicable to chemical reactions. For microbiological use, typical incubation conditions on DG-type media (literature, general guidance) include: • Temperature: Commonly 25–30 °C depending on method and target organisms. • Atmosphere: Aerobic incubation; plates inverted to reduce condensation. • Duration: Often 3–7 days, extending to 10 days for slow growers; enumerate at specified intervals. • Selective supplements: Some protocols add antibiotics (e.g., chloramphenicol) to further suppress bacteria—follow validated procedures. Refer to your method (ISO/industry standard or internal SOP) for exact parameters. Item-specific preparation conditions are provided on the label/CoA.

Safety and Handling

• GHS/CLP: Not specified for this item; refer to the product SDS for authoritative hazard classification, pictograms, signal word, and H‑statements. • Likely hazards (general for dehydrated media): Dust may cause mechanical irritation to eyes, skin, or respiratory tract; some blends may contain inhibitors (e.g., dichloran) that warrant enhanced care. Avoid inhalation of dust and contact with eyes/skin. Do not ingest. • PPE (best practice): Laboratory coat, nitrile gloves, safety glasses/goggles, and dust control (work in a fume hood or use local exhaust) when handling powders. Use heat-resistant gloves when removing hot media from autoclave/water bath. • Handling: Minimize dust generation. Weigh promptly; re-seal container immediately. Prepare media with appropriate sterilization (typically autoclaving). Prevent post-sterilization contamination. • Incompatibilities (general): Strong oxidizers/reactives are not typically encountered in media prep; however, avoid contact with strong oxidants and acids/bases that could degrade nutrients. Do not autoclave in sealed containers; ensure steam can vent. • Thermal hazards: Autoclaving at 121 °C under pressure poses burn/scald risks. Allow vessels to depressurize fully before opening. • Spill response: Avoid creating dust; sweep or vacuum with HEPA filtration. Wash area with water. • First aid (overview; refer to SDS): Eye contact—rinse with water for several minutes; remove contacts if easy. Skin—wash with soap/water. Inhalation—move to fresh air. Ingestion—rinse mouth; seek medical advice if symptoms persist. • Waste: Dispose of unused dehydrated powder and prepared culture plates according to institutional biohazard and chemical waste policies. Decontaminate used plates by autoclaving before disposal.

Solvent Selection

Not typically applicable. Modified DG-18 Agar Base is intended to be dispersed in purified water to prepare a solid culture medium. Selection considerations are limited to water quality (e.g., ASTM Type II or better) and optional supplements per method requirements. For other uses, see Reaction & Applications and Storage & Reconstitution.

Storage and Reconstitution

• Storage (item-specific): Store at room temperature. Keep container tightly closed. Protect from moisture. • Shipping: Shipped in normal conditions (item-specific). • Shelf life: Not specified for this item; refer to CoA/Spec Sheet. • Reconstitution/Preparation (general media guidance; not item-specific):

  • Water quality: Use purified/distilled water (ASTM Type II or better).
  • Weighing: Follow the label/CoA for grams of dehydrated medium per liter. Do not substitute other amounts.
  • Dissolution: Suspend powder in water with stirring. Heat with gentle boiling until completely dissolved. Avoid overheating/caramelization.
  • Sterilization: Autoclave at 121 °C for ~15 minutes (literature standard) unless the label specifies otherwise. Do not autoclave heat-labile supplements.
  • Cooling: Cool to 45–50 °C; add sterile supplements if required by your method. Mix gently to avoid air bubbles.
  • Pouring: Aseptically dispense into sterile Petri dishes or tubes. Allow to solidify. Dry plate surfaces before use.
  • Storage of prepared plates: Typically 2–8 °C in sealed bags/containers to prevent desiccation; use within the period defined by your QA system (literature). • Research Use Note: For research use only. For any item-specific preparation rates, target pH, and performance characteristics, consult the lot CoA/Spec Sheet and SDS.
Structure and Identity

• Item type: Modified DG-18 Agar Base is a dehydrated, multi‑component microbiological culture medium base formulated for the isolation/enumeration of xerophilic and osmotolerant fungi from foods and environmental samples. • Composition nature: Complex mixture (peptones/yeast extracts, carbohydrates/osmotic modifiers, selective agents such as dichloran, and agar). Exact formulation varies by manufacturer. • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet. • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. • SMILES / InChI / InChIKey: Not applicable to complex mixtures; not specified for this item; refer to CoA/Spec Sheet. • Structural description (general): Heterogeneous solid blend; no single defined 2D structure. Functional classes (literature, typical):

  • Gelling polysaccharide (agar) supplying the solid matrix.
  • Peptone/yeast extract providing amino nitrogen, vitamins, and growth factors.
  • Osmotic modifier (e.g., glycerol) establishing reduced water activity (aw ≈ 0.95) to favor xerophiles (literature, typical for DG-18 formulations).
  • Selective inhibitor (dichloran) moderating colony spreading of fast-growing fungi to aid enumeration (literature). • Appearance: Not specified for this item; refer to CoA/Spec Sheet. • Identity confirmation (general practice): Lot-specific performance testing (growth response of challenge strains), pH of prepared medium, gel strength, and sterility after autoclaving (literature).
Synthetic Utility

Not applicable to synthetic chemistry. Modified DG-18 Agar Base is not a reagent for chemical transformations. Its value lies in microbiological selectivity and plate-based enumeration of xerophilic fungi. For usage details, see Reaction & Applications and Application Protocols.

Target Specificity

Not applicable. This product is not an antibody, probe, or affinity reagent. It is a culture medium base with functional selectivity for xerophilic/osmotolerant fungi (general microbiological selectivity rather than molecular target specificity). See Biological Roles.

よくある質問

How should this product be stored?
Store at room temperature.

グレードの選択でお困りですか?

当社のグレード選定ガイドでは、カタログ内のすべてのバリエーションについて、純度、安定剤の状態、用途への適合性を網羅しています。

BioReagent グレードガイドを見る →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.