グレード&純度BioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
レビュー
顧客レビュー
Application Protocols
Item-specific protocols: Not specified for this item; follow the instructions on the product label and CoA/Spec Sheet.
General workflow for plate preparation and use (literature guidance; adjust per your SOPs):
Preparation: Weigh the dehydrated medium as directed by the manufacturer into purified water. Heat with stirring until fully dissolved. If advised for your formulation, autoclave at 121 °C for ~15 minutes.
Post-sterilization handling: Cool molten agar to ~45–50 °C. If using a heat-sensitive indicator component, add aseptically at this stage per the manufacturer’s instructions. Mix gently to avoid bubbles.
Plate pouring: Dispense into sterile Petri dishes on a level surface. Allow to solidify. Dry plates as needed in a biosafety cabinet to remove surface moisture. Protect from light.
Inoculation and incubation: Streak, spread, or overlay/membrane-filter as per method; incubate at the temperature and duration appropriate for the target organisms (commonly 30–37 °C in research contexts).
Detection: Examine colonies under long-wave UV (~365 nm). Record presence/absence and intensity of blue fluorescence. Limit illumination time to reduce photobleaching.
Quality controls: Include known positive/negative control strains each run. Document lot numbers and plate prep dates.
Disposal: Autoclave used plates/media before discarding per biosafety regulations.
Notes: For research use only (from Product Data).
Biological Roles
Scope: This tab discusses biological context relevant to the fluorogenic indicator and target enzyme in this medium. It is not a clinical claim and not item-specific.
β-Glucuronidase (GUD) pathway (literature):
Many Enterobacteriaceae, including numerous E. coli strains, express GUD that cleaves β-D-glucuronides. MUG serves as a surrogate substrate; enzymatic hydrolysis releases 4-methylumbelliferone (4-MU), a fluorescent molecule.
The reaction: MUG + H2O —(GUD)→ 4-MU + D-glucuronic acid. The liberated 4-MU exhibits strong blue fluorescence, which intensifies under mildly alkaline conditions.
Microbial physiology notes (literature):
GUD expression can vary with strain, temperature, and growth phase. Some pathogenic E. coli lineages (e.g., O157:H7) may be GUD-negative, while certain non-E. coli organisms can be GUD-positive, underscoring the need for confirmatory testing.
Nutrient agar provides amino acids, peptides, vitamins, and minerals to support non-fastidious heterotrophs, with agar creating a semi-solid matrix suitable for colony isolation and enumeration.
Analytical considerations (literature):
Fluorescence readouts are influenced by pH, ionic strength, and medium background. Blue fluorescence of 4-MU is commonly measured with excitation ~360–370 nm and emission ~440–455 nm.
Photobleaching and quenching can occur; minimize ambient light exposure and consider brief UV illumination during observation.
Buffer Applications
Applicability: This product is a complex culture medium designed for microbial cultivation and fluorogenic detection; it is not intended or optimized for use as a buffering agent or analytical buffer system.
Guidance:
If your workflow requires defined buffering (e.g., for fluorescence quantitation of 4-MU in extracts), use standard laboratory buffers (e.g., phosphate, Tris) prepared at appropriate pH/ionic strength and validated for compatibility with fluorescence assays.
The inherent buffering capacity of complex media is variable and composition-dependent; item-specific buffer capacity or pH specifications are Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
Context: As a water-based microbiological medium, the principal environmental considerations are energy use (heating/autoclaving), plastic/agar waste, and management of biohazardous materials rather than solvent hazards.
Greener practice options (general literature guidance):
Energy optimization: consolidate autoclave loads, use validated minimum sterilization cycles, and pour only the number of plates required to reduce waste.
Waste reduction: adopt reusable glassware where feasible; segregate inoculated (biohazard) from uninoculated (non-biohazard) waste. Solidify and autoclave plates prior to disposal following institutional guidelines.
Indicator selection tradeoffs:
MUG (fluorogenic) vs chromogenic glucuronides (e.g., X-Gluc-type):
Pros of MUG: high sensitivity, simple UV visualization, minimal dye leaching.
Cons of MUG: requires UV illumination (worker exposure controls), fluorescence can be pH dependent; photobleaches with light.
Chromogenic alternatives: visible color readout without UV; may introduce colored effluents and can be less sensitive depending on formulation.
Procurement: source agar from responsibly harvested seaweed and consider suppliers with stated sustainability practices.
Item-specific alternative recommendations: Not specified for this item; no designated “green” substitute provided by the manufacturer.
Pharmaceutical Uses
Applicability: This product is not an excipient or active ingredient; it is intended for research microbiology workflows.
Potential roles in pharmaceutical R&D/QC settings (general, non-clinical):
Environmental monitoring method development, microbial enumeration studies, and research on indicator systems for presumptive identification of GUD-positive organisms.
Training and validation studies comparing fluorogenic versus chromogenic detection platforms for microbial screening.
Compliance note:
No pharmacopeial status or compendial equivalence is claimed here. Item-specific regulatory or compendial alignment is Not specified for this item; refer to CoA/Spec Sheet.
Research Use Only statement (from Product Data): For research use only.
Physical Properties
Item-specific facts (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
General/literature characteristics for this class of medium (not specifications):
Physical form: typically a free-flowing, beige to tan dehydrated powder before preparation; forms a firm gel when dissolved in water and solidified (agar ~1–2% w/v in typical media).
Solubility: components dissolve/disperse in water with heating; insoluble in organic solvents.
pH: final medium pH is medium-dependent; Not specified for this item; refer to CoA/Spec Sheet.
Optical properties (MUG/4-MU fluorophore, literature): excitation ~365 nm (near-UV) and emission ~440–455 nm (blue fluorescence) after enzymatic cleavage to 4-MU; fluorescence increases with alkaline pH (>8) during measurement.
Sterilization (literature practice): moist heat at 121 °C for ~15 minutes is commonly used for agar media; components sensitive to heat are often filter-sterilized and added aseptically after cooling to ~45–50 °C.
Stability (general): protect from light to preserve fluorogenic substrates; avoid prolonged overheating to minimize sugar/coumarin degradation.
Quality and Grades
Item-specific facts (from Product Data):
Grade: BioReagent
Interpretation of grade (general):
BioReagent grade indicates suitability for biological and microbiological research applications, emphasizing consistent performance, low background interference for biological assays, and controlled bioburden/impurity levels suitable for research (not clinical) use. It does not imply pharmacopeial compliance unless explicitly stated.
For fluorogenic media, BioReagent grade supports reliable enzyme-indicator reactions (e.g., β-glucuronidase with MUG) by controlling impurities that could quench or enhance fluorescence or inhibit growth.
What is not specified for this item (consult CoA/Spec Sheet):
Exact formulation (g/L of peptones/extracts/NaCl/agar/MUG), pH of prepared medium, sterility testing parameters, fluorescence background, and performance criteria (e.g., recovery rates for target organisms). Not specified for this item; refer to CoA/Spec Sheet.
Practical quality notes (general):
Lot-to-lot consistency is important for growth and fluorescence readout; retain CoAs for each lot used in a study.
For fluorescence-based detection, low intrinsic background and good optical clarity of the gel are desirable; protect from light to maintain substrate integrity.
Reaction and Applications
Item-specific applications (from Product Data):
Manufacturer Applications: Not specified for this item in the catalog entry.
General/literature applications for MUG Nutrient Agar-type media (research use only):
Detection of β-glucuronidase-positive bacteria (classically many E. coli isolates) by fluorogenic readout: colonies exhibiting GUD activity hydrolyze MUG to release 4-methylumbelliferone, yielding blue fluorescence under long-wave UV (∼365 nm) in the agar or colony vicinity.
Enumeration studies, water/food/environmental microbiology research (e.g., membrane filtration or spread-plating) where a general nutrient base plus a GUD indicator facilitates presumptive identification while maintaining broad growth support for non-fastidious organisms.
Education and method development: side-by-side evaluation of indicator systems (e.g., MUG vs chromogenic glucuronides) and impacts of incubation conditions on enzyme expression.
Practical tips (literature):
Protect plates from light to preserve fluorophore sensitivity.
UV visualization is best in a dark room using appropriate eye/skin protection; verify excitation/emission settings if using a transilluminator or fluorescence imager.
Some E. coli serotypes (e.g., O157:H7) can be GUD-negative; conversely, certain non-E. coli may express GUD. Use confirmatory tests for taxonomic resolution.
Incubation temperature, medium composition, and oxygenation can modulate enzyme expression and fluorescence intensity.
Reaction Conditions
Item-specific conditions: Not specified for this item; refer to CoA/Spec Sheet and product label for exact preparation instructions.
General preparation and use conditions for MUG-supplemented agar (literature guidance; not a specification):
Dissolution: disperse dehydrated medium in purified water with stirring and heat until fully dissolved; avoid scorching. If the indicator is heat-labile in a given formulation, aseptically add it after autoclaving when the molten agar cools to ~45–50 °C.
Sterilization: autoclave at 121 °C for ~15 minutes; vent properly to avoid boil-over. Allow to cool to pouring temperature before plating.
Incubation: typical aerobic incubation for environmental/food isolates is 30–37 °C; actual temperatures and times depend on organism and method under study.
Detection: examine plates under long-wave UV (~365 nm) in a dark environment; record fluorescence promptly to minimize photobleaching. For quantitative measurement, extract with an appropriate buffer and measure fluorescence (Ex/Em ~365/445 nm) with pH control.
Controls: include known GUD-positive and GUD-negative strains as process controls to verify medium selectivity and indicator performance.
Environmental parameters:
Light: minimize exposure during preparation and storage to protect the fluorogenic substrate.
pH: maintain within the range recommended for the medium; excessive alkalinity/acidity can alter growth and fluorescence.
Safety and Handling
Item-specific hazard data (from Product Data):
Signal word / GHS classification / Pictograms / H-statements: Not specified for this item; refer to SDS.
General laboratory safety guidance (literature/practice; not a substitute for the SDS):
Use standard microbiological PPE: lab coat, safety glasses, and appropriate gloves. Handle powders in a way that minimizes dust generation; employ local exhaust if needed.
Avoid inhalation and contact with eyes/skin. Wash thoroughly after handling.
Microbiological risk: once inoculated, plates/broths contain live microorganisms. Treat all used media as biohazardous and autoclave before disposal, in compliance with institutional biosafety procedures.
Thermal hazards: molten agar is hot; handle flasks and plates with heat-resistant gloves and face protection to prevent burns. Avoid boiling over when heating.
Chemical incompatibilities (general): strong oxidizers and strong acids/bases may degrade organic components and fluorophore integrity; keep away from reactive chemicals and light to preserve MUG activity.
First aid (overview): in case of eye/skin contact with powder or molten medium, rinse with copious water; if inhaled, move to fresh air; if ingested, rinse mouth. Seek medical attention as needed. Refer to the SDS for authoritative instructions.
Fire safety: organic content is combustible; use water spray, foam, CO2, or dry chemical as appropriate. Thermal decomposition can produce irritating fumes; firefighters should wear SCBA.
Solvent Selection
Applicability: This product is a dehydrated culture medium intended to be prepared in water; organic solvent selection is not applicable.
Aqueous preparation considerations (general literature guidance):
Use high-purity water (e.g., ASTM Type I/II) to minimize inhibitory ions, organics, or particulates that could impact microbial growth or fluorescence background.
Adjust water quality to be low in residual chlorine/chloramine; pre-boiling or activated carbon may be used in facility water systems to remove oxidants that degrade coumarins.
Degassing water before autoclaving can reduce bubble formation in poured plates.
Comparison to alternatives (general):
Buffering: If your application demands tighter pH control during incubation or fluorescence measurement, consider preparing in a defined buffer (e.g., phosphate) only if compatible with the medium’s intended performance; otherwise, follow the product’s instructions. Excess buffering can alter enzyme activity and growth characteristics.
Light management: Prepare and store in opaque or amber containers to limit photodegradation of the MUG substrate.
Not specified for this item: any requirement for special solvents, co-solvents, or additives. Refer to the product’s CoA/Spec Sheet for definitive preparation guidance.
Storage and Reconstitution
Item-specific storage and shipping (from Product Data):
Storage Conditions: Room temperature
Shipped In: Normal
Reconstitution guidance (general literature; follow the product label/CoA for exact instructions):
Solvent: Use purified water for reconstitution.
Dissolution: Add the dehydrated medium gradually with stirring; heat to fully dissolve. Avoid localized overheating that can caramelize sugars or degrade indicator components.
Sterilization: Autoclave at 121 °C for ~15 minutes unless the product label specifies an alternative. If an indicator is heat-sensitive in your formulation, aseptically add it after cooling the sterilized base to ~45–50 °C.
Plate/broth storage: Protect prepared media from light. Store poured plates inverted in sealed sleeves or bags to limit desiccation. Typical laboratory practice stores plates at 2–8 °C and uses them within a few weeks; verify and align with your SOPs. Prepared broths are generally stored refrigerated and used promptly.
Freeze–thaw: Do not freeze prepared agar plates; freezing disrupts the gel matrix. If long-term storage of dehydrated medium is required, keep tightly closed in a cool, dry, light-protected place per label instructions.
Not specified for this item:
Exact shelf life, rehydration volumes, pH after reconstitution, and composition. Refer to the CoA/Spec Sheet.
Structure and Identity
Item-specific facts (from Product Data):
Product: MUG Nutrient Agar Medium (SKU: M1528700)
Grade: BioReagent
CAS/InChIKey/SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula / Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
General description (literature):
This product category denotes a complex, multi-component microbiological culture medium composed of a nutrient agar base supplemented with a fluorogenic substrate MUG (4-methylumbelliferyl-β-D-glucuronide). It is intended for the cultivation of non-fastidious bacteria and the fluorogenic indication of β-glucuronidase (GUD) activity, characteristically associated with many Escherichia coli strains.
Structural features (qualitative):
Nutrient agar: a heterogeneous mixture of peptones/tryptones, yeast/beef extract, NaCl, and agar (a sulfated galactan polysaccharide) serving as a gelling matrix.
MUG: a β-D-glucuronide of 4-methylumbelliferone; enzymatic hydrolysis liberates the phenolic fluorophore 4-methylumbelliferone (4-MU).
2D structure in words (literature):
Agar: linear galactose-based polymer with alternating 3,6-anhydro-L-galactose and D-galactose units (agarose fraction) and variable agaropectin side groups.
MUG: a glucuronic acid-containing glycoside linked via a β-glycosidic bond to a coumarin ring (4-methylumbelliferone).
Synthetic Utility
Applicability: As a microbiological culture medium, this product is not used as a reagent in organic synthesis.
Related biochemical reaction context (literature, for conceptual clarity):
The key transformation associated with the indicator is an enzyme-catalyzed hydrolysis of a β-D-glucuronide (MUG) to release 4-methylumbelliferone. While not a synthetic method, this reaction underlies the analytical readout and can be modeled in vitro with purified β-glucuronidase for kinetic studies.
For chemical synthesis needs related to components (general):
Researchers interested in coumarin derivatives or glycosides would typically source neat reagents (e.g., 4-methylumbelliferone, protected glucuronides) rather than formulated media. Reaction planning for such targets would involve glycosylation chemistry and coumarin functionalization, which lies outside the scope of this product.
Target Specificity
Item-specific target data: Not specified for this item; no organism-specific performance or selectivity claims are provided in the Product Data.
General/literature context (not a claim for this item):
MUG-based media provide a fluorogenic readout of β-glucuronidase activity, commonly associated with many E. coli strains. However, some E. coli (e.g., certain O157:H7 isolates) may be GUD-negative, and some non-E. coli species can be GUD-positive. Therefore, fluorescence should be considered presumptive and followed by confirmatory identification.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.