NGS Library Quantification Kit - for Ion torrent, high purity

Cat. No.: N665925

グレード＆純度 for Ion torrent

概要

N665925	Component	1 mL	5 mL	Storage
N665925A	2×SYBR qPCR Master Mix 1	1 mL	5 mL	-20℃. Avoid freeze/ Thaw cycle.
N665925B	qPCR Primer Mix 1	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925C	DNA Standard I	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925D	DNA Standard II	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925E	DNA Standard III	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925F	DNA Standard IV	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925G	DNA Standard V	100 μL	500 μL	-20℃. Avoid freeze/ Thaw cycle.
N665925H	50×High ROX	40 μL	200 μL	-20℃. Avoid freeze/ Thaw cycle.

Product Introduction

This product is a real-time fluorescence quantitative PCR of the products after NGS library construction using a dye method (SYBR Green I).

(qPCR). The kit provides the reaction mixes, DNA primer mixtures, standards and sample dilutions required for the qPCR process, making the reagent system complete and easy to use. The fluorescent dye SYBR Green I contained in the reaction mixture can bind to all double-stranded DNA; the GoldStar Taq DNA Polymerase used is a chemically modified new high-efficiency hot-start polymerase, and the activation of the enzyme needs to be incubated at 95℃ for 10 minutes. the product has high specificity, high amplification efficiency, and is able to quickly and accurately quantify the concentration of the constructed libraries. The product is highly specific and efficient in amplification, and can quickly and accurately quantify the concentration of the constructed library.

ROX dye is used to correct the fluorescence signal error generated between wells of a quantitative PCR instrument, and is generally used in Real Time PCR amplifiers from ABI, Stratagene, and other companies. The excitation optics vary from instrument to instrument, so the concentration of ROX dye must be matched to the corresponding fluorescence quantitative PCR instrument.

Instruments that do not require ROX calibration: Roche LightCycler 480, Roche LightCyler 96, Bio-rad iCyler iQ, iQ5, CFX96, etc.

Instruments requiring Low ROX calibration: ABI Prism7500/7500 Fast, QuantStudio®3 System, QuantStudio®5 System, QuantStudio®6 Flex System, QuantStudio®7 Flex System, ViiA 7 System, Stratagene Mx3000/Mx3005P, Corbett Rotor Gene 3000, and others.

Instruments requiring High ROX calibration: ABI Prism7000/7300/7700/7900, Eppendorf, ABI Step One/Step One Plus, etc.

Note: High Rox and Low Rox are formulated as described in Use 2.

Scope of application

This product is designed for absolute quantification of the concentration of Ion torrent platform second generation sequencing libraries. The end of the library contains Ion torrent P5 and P7 microarray binding sequences, the length of which does not exceed 1kb, and the concentration is not less than 0.005pM can be used to perform quantitative experiments with this product. The qPCR Primer Mix provided in the kit contains the following two primer sequences:

Primer 1:5'-CCA TCT CAT CCC TGC GTG TC - 3' Primer 2: 5'-CCT CTC TAT GGG CAG TCG GTG AT-3'

The primer sequence can be used in advance to confirm whether the library can be amplified by that primer pair.

Usage

1. Amplification template preparation

The library samples to be detected were diluted with TE (10 mM Tris-Cl, pH 8.0, 1 mM EDTA), and the concentration after dilution was as close as possible to the range of 0.05-50 pM. 4°C on ice was set aside.

2. qPCR reaction system preparation

The desired cryopreservation reagent is pre-melted completely and mixed by inverting several times before preparation, then centrifuged briefly and set aside.

The base reaction system for 20 μl was as follows:

Reagent	20 μl Reaction system
2×SYBR qPCR MasterMix	10 μl
qPCR Primer Mix 1	0.8 μl
Template	4 μl
ddH₂O	5.2 μl

Description: High Rox model: add 1 μl High Rox per 50 μl of reaction system;

Low Rox model: 1 μl High Rox per 500 μl of reaction system.

Prepare a sufficient amount of reaction system mixture according to the need, mix well and add to the reaction wells in a volume of 16 μl per well, add the same volume of TE to the blank control, and then add the prepared standards and diluted samples to the corresponding reaction wells in a volume of 4 μl/well. It is recommended to use 20 μl reaction system, if you need to carry out a smaller system reaction, the system components can be reduced in equal proportion.
3. qPCR reaction program

1) Please use 60-64℃ as a reference for setting range of annealing temperature, and increase the annealing temperature when non-specific reaction occurs.

2) If the average length of the library is greater than 700bp, the annealing/extension time should be increased appropriately.

data analysis

1. Standard curve production

The standard curve was plotted using Ct values in the valid range. The standard curve correlation coefficient R2 should not be less than 0.99 and the slope should lie between -3.1 and -3.6. If the standard curve parameters are not reasonable, it is recommended to repeat the experiment.

DNA Standard Name	DNA Standard Concentration
DNA Standard I	50 pM
DNA Standard II	5 pM
DNA Standard III	0.5 pM
DNA Standard IV	0.05 pM
DNA Standard V	0.005 pM

2. Library concentration calculation

The difference in Ct between the three replicate wells of the experiment should be no more than 0.2, otherwise the invalid data should be deleted or the experiment should be repeated. Do not use the Ct outside the valid Ct range of the standard curve to calculate the concentration of the diluted libraries. Please refer to the data processing Excel of this product for the specific library concentration calculation method.

matters needing attention

1. Before testing, these instructions should be read in detail. It should be operated by personnel with professional experience or qualified by training.

2. For use, please mix gently by turning up and down, avoid foaming as much as possible, and use it after centrifugation for a short period of time.

3. Avoid repeated freezing and thawing of the product, repeated freezing and thawing may degrade the performance of the product.

4. When preparing the reaction solution, please use new or non-contaminated tips and centrifuge tubes to prevent contamination as much as possible.

仕様

仕様と純度

for Ion torrent

保管と配送

保管条件

Store at -20°C,Avoid repeated freezing and thawing

入荷

Ice chest + Ice pads