PEG-based ultra-tough hydrogel solution - BioReagent,sterile-filtered
在庫あり
SKU
P1518388
Product Introduction
PEG-based Ultra-tough Hydrogel Solution is a biomimetic interfacial bonding hydrogel material developed based on the original gel technology of "photocoupling reaction". It is composed of o-nitrobenzyl alcohol-modified polyethylene glycol (PEGNB), methacrylated hyaluronic acid sodium salt (HAMA), photoinitiator (NAP) and phosphate aqueous solution. This product is a sterile, ready-to-use hydrogel solution. Only a few seconds of light irradiation is required for this product to form a strong and tough hydrogel, which almost subverts the preparation and mechanical properties of conventional hydrogels.
Product Specifications
| Product Code | Appearance | Specification | Note |
| P1518388 | Pale yellow transparent solution | 5 mL/vial、10 mL/vial | Store in the dark |
Performance Parameters
| Test Item | Performance Parameter | Test Item | Performance Parameter |
| Tensile Modulus | 320~350 kPa | Elongation at Break | 148~165% |
| Tensile Strength | 3.3~3.7 MPa | Compressive Strength | 15.0~16.2 MPa |
| Water Content | ≈80% | Swelling Degree | 150~170% |
| Cytocompatibility | No potential cytotoxicity |
Usage Instructions
1. Before use, tighten the plunger to the rubber stopper inside the syringe, then unscrew the hard spiral rubber stopper to push out the solution for use.
1. Before use, tighten the plunger to the rubber stopper inside the syringe, then unscrew the hard spiral rubber stopper to push out the solution for use.
2. The product undergoes cross-linking reaction to form a gel when irradiated with light at a wavelength of 365-405 nm.
3. The product is sterilized. Please maintain aseptic operation during use to avoid microbial contamination.
4. Before use, the outer surface of the product syringe can be wiped and disinfected with alcohol.
5. The product must be stored strictly protected from light.
その他の情報
| 仕様と純度 | BioReagent,sterile-filtered | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 安定性と保管 | Store at 2-8℃ long term (24 months). Store in the dark. | ||||||||||||||||||||||||||||
| 保管条件 | Store at 2-8°C,Protected from light | ||||||||||||||||||||||||||||
| 入荷 | Wet ice | ||||||||||||||||||||||||||||
| Product Description | Product Introduction PEG-based Ultra-tough Hydrogel Solution is a biomimetic interfacial bonding hydrogel material developed based on the original gel technology of "photocoupling reaction". It is composed of o-nitrobenzyl alcohol-modified polyethylene glycol (PEGNB), methacrylated hyaluronic acid sodium salt (HAMA), photoinitiator (NAP) and phosphate aqueous solution. This product is a sterile, ready-to-use hydrogel solution. Only a few seconds of light irradiation is required for this product to form a strong and tough hydrogel, which almost subverts the preparation and mechanical properties of conventional hydrogels. Product Specifications
Performance Parameters
Usage Instructions 1. Before use, tighten the plunger to the rubber stopper inside the syringe, then unscrew the hard spiral rubber stopper to push out the solution for use. 2. The product undergoes cross-linking reaction to form a gel when irradiated with light at a wavelength of 365-405 nm. 3. The product is sterilized. Please maintain aseptic operation during use to avoid microbial contamination. 4. Before use, the outer surface of the product syringe can be wiped and disinfected with alcohol. 5. The product must be stored strictly protected from light. | ||||||||||||||||||||||||||||
| 感度 | Light-sensitive |
レビュー
顧客レビュー
Remind me later