Sheet resistance, spin cast thin films: 10,000-50,000 Ohms/sqAverage transmittance: 70-90%Biodegradble conducting polymer for bomedical applications. PCL diol blocks have average molecular weight 2000 and PPy block have an average molecular weight of 4000 with a 25% doping level. Good biocompatibility with expected weight loss of 40% at 200 days in pH=7 buffer.Thin films can be prepared by spin casting the nitromethane dispersion at 1000 rpm. Thicker and more conducting films can be prepared by air spraying the dispersion on a substrate. Sprayed films can be dried at 30-40 °C, then pressed between two polished dye plates at 1000-10,000 psi to increase film density, strength and scratch resistance.
仕様
同義語
Biotron PP-NM, PCL-block-PPy
仕様と純度
0.3-0.7wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant
保管条件
Room temperature
詳細データ
証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
ソリューション計算機
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.