グレード&純度Moligand™?Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools.10 mM in DMSO
proTAME, a cell-permeable proagent form of TAME, is an anaphase promoting complex/cyclosome (APC/C) inhibitor. proTAME causes cell cycle arrest in metaphase .
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
レビュー
顧客レビュー
Application Protocols
Validated application protocols, recommended working ranges, and assay conditions are not provided for this item on the product page.
Tested applications: Not specified for this item; refer to CoA/Spec Sheet or SDS for any handling constraints.
General guidance: Establish dose–response curves, include vehicle controls, and confirm on-pathway effects with orthogonal readouts appropriate to your model system.
For detailed, fit-for-purpose protocols, consult peer-reviewed literature using proTAME in assays similar to yours and adapt conditions through pilot experiments.
Biological Roles
proTAME is widely used in research as a cell-permeable prodrug form of TAME to perturb the ubiquitin–proteasome system at the level of the anaphase-promoting complex/cyclosome (APC/C). The notes below summarize literature context only and are not item-specific specifications.
Mechanistic focus: Upon cellular uptake, intracellular esterases unmask the active motif that competes at APC/C substrate-recognition interfaces. This modulation impacts ubiquitination of canonical APC/C substrates (e.g., cyclins, securin), enabling interrogation of metaphase–anaphase transitions.
Use cases: Acute inhibition helps synchronize populations in mitosis, dissect spindle assembly checkpoint dependencies, and study degron-mediated substrate turnover. It provides temporal control complementary to genetic methods.
Systems biology: Time-resolved proteomics and live-cell imaging with proTAME treatment are used to map substrate stability networks and checkpoint signaling feedback.
Selectivity considerations: Literature reports context-dependent effects across APC/C co-activator states (CDC20 vs CDH1), motivating careful controls, titrations, and parallel use of orthogonal probes where possible.
Experimental readouts: Accumulation of APC/C substrates, delay in sister chromatid separation, and altered ubiquitin chain formation are typical markers in cell and biochemical models.
Reminder: This product is for research use only. No clinical, diagnostic, or therapeutic use is intended or implied.
Buffer Applications
This compound is not a buffering agent. It does not form classical buffer systems nor is it used to control pH. For experimental work, it is typically dissolved in DMSO and then diluted into pre-formulated biological buffers or cell culture media.
Practical note:
Choose assay buffers that maintain protein stability and cell health (e.g., HEPES- or PBS-based systems) and verify that the final DMSO concentration is within tolerated limits for your model. Include vehicle controls to isolate compound effects from solvent effects.
Green Alternatives
Green chemistry considerations are not typically central for one-off use of bioactive screening compounds like proTAME. However, the choice of formulation solvent and handling can support greener practices.
Prefer lower-toxicity solvents for working solutions when feasible. For most cell-based assays, DMSO remains the standard; minimize volumes and avoid unnecessary dilutions.
Use small aliquots to reduce waste from degraded stock solutions. Plan experiments to consume aliquots fully rather than discarding partially used vials.
For cleaning and sample prep, consider water/ethanol blends where compatible with the analyte and instrumentation, reducing chlorinated solvent use.
Implement microscale assay formats (96/384-well) to significantly reduce chemical and plastic consumption without compromising data quality.
Because proTAME is a specialized bioactive tool rather than a process solvent or reagent, there are no direct “green substitute molecules” for the same biological function. Greener practice focuses on solvent minimization, right-sizing aliquots, and efficient experimental design.
Pharmaceutical Uses
This product is supplied strictly for research use only and is not manufactured to GMP standards. It is not an excipient, not listed with pharmacopeial monographs for clinical use, and is not intended for inclusion in human or veterinary drug products.
Relevant to formulation research only:
In preclinical assay development contexts, investigators may prepare DMSO stock solutions and dilute into biological media; such procedures are strictly non-clinical and for laboratory investigations.
For any translational or regulated applications, separate sourcing under appropriate quality systems and regulatory frameworks would be required.
Physical Properties
Item-specific physicochemical constants are not provided on this page. Refer to the CoA/Spec Sheet for definitive values suitable for method validation.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Melting point, boiling point, density, refractive index: Not specified for this item; refer to CoA/Spec Sheet.
Solubility (item-specific): Not specified for this item; refer to CoA/Spec Sheet.
General/literature guidance (not specifications):
proTAME is typically handled as a solid and reconstituted in polar aprotic solvents (e.g., DMSO) to make concentrated stocks for biological assays.
Working solutions are commonly prepared by diluting DMSO stocks into aqueous assay buffers or culture media; the final DMSO fraction is often kept ≤0.1–0.5% v/v to limit vehicle effects.
Light and moisture sensitivity can be a concern for ester-containing prodrugs; minimize exposure to ambient humidity and repeated warming to preserve integrity.
If you require exact values for QC, stability studies, or regulatory filings, please request the current CoA/Spec Sheet associated with SKU P1495667.
Quality and Grades
Grade: Moligand™. This designation indicates a screening-library–ready small molecule suitable for discovery biology and chemical probe studies. While not equivalent to GMP or pharmacopeial grades, Moligand™ emphasizes identity and purity consistent with high-throughput screening and mechanistic studies.
What Moligand™ typically entails (general guidance; consult CoA for item-specific details):
Identity confirmation by orthogonal methods (e.g., NMR, MS) appropriate for library compounds.
Purity sufficient for biological screening work; exact percentage and analytical methods are reported on the item’s CoA/Spec Sheet.
Packaging to minimize moisture uptake and photodegradation; often supplied in amber vials or plates compatible with robotics.
Implications for use:
Suitable for target validation, phenotypic screens, and mechanistic studies in cells or biochemical assays.
Not intended for human or veterinary use, diagnostics, or as a drug substance/excipient.
What is specific to this item:
Storage: Store at -80°C (provided in Product Data).
Shipping: Dry ice packs + cold packs.
Best practices:
Upon receipt, allow the sealed container to warm to room temperature in a desiccated environment before opening to avoid condensation. Aliquot into single-use portions to prevent cumulative freeze–thaw and maintain assay reproducibility.
For analytical assurance, review the provided CoA/Spec Sheet for this lot before critical experiments.
Reaction and Applications
This product is primarily used as a bioactive research tool rather than as a synthetic reagent. As such, reaction chemistry applications are not the focus. Instead, typical research applications involve cell-cycle investigations and mechanistic enzymology.
Cell-cycle studies: proTAME is widely used to interrogate the anaphase-promoting complex/cyclosome (APC/C) pathway by providing a cell-permeable, prodrug version of TAME. It can facilitate mitotic arrest or synchronization paradigms when used alone or in combination with microtubule agents, enabling downstream analyses (e.g., immunoblotting for cyclin substrates, live-cell imaging of mitotic progression).
Biochemical assays: Applied to study substrate recognition and ubiquitination dynamics in reconstituted systems; helps dissect co-activator (e.g., CDC20/CDH1) dependencies and degron interactions.
Chemical biology workflows: Useful in acute, reversible perturbation experiments compared with genetic knockdowns; supports time-resolved proteomics to profile APC/C substrate stability.
Practical tips (general):
Prepare fresh DMSO stocks or use single-use aliquots to avoid hydrolysis of ester promoieties.
Validate activity in your system with a concentration-response curve and appropriate vehicle controls.
Combine with orthogonal readouts (cyclin accumulation, securin stability, SAC markers) to confirm on-pathway effects.
Note: This section reflects common literature practice and is provided for context; consult primary references and your CoA/Spec Sheet for item-specific handling or potency information.
Reaction Conditions
Not typically applicable. This product is not used as a reagent in preparative organic reactions; instead, it is applied as a bioactive probe in cells or biochemical systems.
General laboratory use conditions (literature-based, not specifications):
Stock preparation: Dissolve in anhydrous DMSO to prepare concentrated stocks; aliquot and store frozen to limit hydrolysis. Avoid repeated freeze–thaw cycles.
Working concentrations: Determined empirically for each system; establish a concentration–response curve and monitor assay-specific readouts. Include vehicle controls.
Temperature and atmosphere: Standard biological assay conditions (ambient to 37°C, aqueous buffers/medium). Protect from moisture and prolonged light exposure where feasible.
For synthetic reaction parameters (solvent, catalysts, yields), this section is not applicable to proTAME.
Safety and Handling
Hazard classification and detailed toxicological data are not listed here. Always consult the product SDS for authoritative, up-to-date safety information before use.
GHS classification: Not specified for this item; refer to SDS.
Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
General laboratory safety guidance (non-exhaustive):
PPE: Wear lab coat, appropriate gloves (e.g., nitrile), and safety glasses. Use in a chemical fume hood when handling powders, concentrated DMSO stocks, or when weighing to avoid inhalation and minimize dermal exposure.
Avoid ingestion and inhalation; prevent contact with skin and eyes. Wash thoroughly after handling.
Handling: Many bioactive small molecules are irritants or harmful if swallowed; handle as if harmful. Prevent cross-contamination of screening collections.
Incompatibilities: Strong oxidizers and strong acids/bases may promote degradation of ester-containing prodrugs. Avoid prolonged exposure to moisture and elevated temperatures.
Spill/accident response (general): For small spills, absorb with inert material, collect in a chemical waste container, and ventilate area. For skin/eye contact, rinse with water for at least 15 minutes and seek medical attention as appropriate.
Waste: Dispose of unused product and solutions as hazardous organic waste according to institutional and governmental regulations.
Storage-related safety:
Store at -80°C as specified; keep container tightly closed. Minimize freeze–thaw cycles by aliquoting upon first receipt. Shipments are supplied on dry ice + cold packs to maintain the cold chain.
Solvent Selection
This product is a bioactive small molecule, not a solvent. Solvent selection here pertains to reconstitution and assay preparation rather than reaction media.
General, literature-based guidance for proTAME handling (not specifications):
Primary stock solvent: DMSO is commonly used to prepare concentrated stocks for cell-based and biochemical assays due to its strong solvating power for moderately lipophilic, ester-containing prodrugs.
Aqueous compatibility: Working solutions are typically made by diluting DMSO stocks into aqueous assay buffers or complete cell culture media. Keep final DMSO ≤0.1–0.5% v/v when possible to reduce vehicle effects on cells.
Alternative solvents: For method development, DMF can be used as a co-solvent; ethanol is sometimes acceptable but may be less effective for highly polar salts or very hydrophobic promoieties.
Filtration: If sterile working solutions are required, pass through a 0.22 µm PTFE or PVDF filter compatible with DMSO.
Quick comparison (general):
DMSO: Highest solvating power; broadly compatible with biological assays at low percentages; hygroscopic.
DMF: Strong solvent, but less favored in live-cell work; typically used in analytical/sample prep contexts.
Aqueous buffers: Final vehicle; solubility may be limited without an organic co-solvent.
Always verify item-specific solubility and stability with the current CoA/Spec Sheet and pilot tests.
Storage and Reconstitution
Storage conditions (item-specific): Store at -80°C. Keep tightly closed and protected from moisture. Shipment is maintained on dry ice packs + cold packs to preserve integrity.
Reconstitution (general guidance; not item-specific specifications):
Solvent: Prepare concentrated stocks in anhydrous DMSO. Vortex to ensure complete dissolution. If sterility is required, sterile-filter the solution through a 0.22 µm PTFE/PVDF membrane compatible with DMSO.
Aliquoting: Dispense single-use aliquots (e.g., 10–50 µL) in low-bind tubes or plates to minimize freeze–thaw cycles. Label with concentration, date, and lot.
Working solutions: Dilute DMSO stocks into pre-warmed assay buffer or complete media immediately before use. Aim for minimal final DMSO (commonly ≤0.1–0.5% v/v) unless your system tolerates higher.
Stability: Prodrug esters can hydrolyze upon repeated warming or exposure to moisture. Keep solutions cold and capped; avoid extended bench time. Discard aliquots showing precipitation, discoloration, or unexpected assay behavior.
Always consult the lot-specific CoA/Spec Sheet for any available item-specific solubility, concentration limits, and stability data before critical experiments.
Structure and Identity
proTAME is a bioactive small molecule commonly used in chemical biology for cell-cycle research. This listing is for a research-use compound without full structural metadata disclosed here.
CAS: 1362911-19-0 (literature-identifies proTAME)
PubChem CID: 56924780 (literature)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general, literature description):
proTAME is a cell-permeable prodrug derivative of TAME (tosyl-L-arginine methyl ester). It is designed to mask polarity and enhance uptake; intracellular esterases reveal the active motif.
Functional group motifs typically include masked carboxylates/esters and a cationic guanidino/arginine-like moiety in the unmasked form. The prodrug often contains hydrophobic promoieties to improve membrane permeability.
2D structure description (general):
A peptidomimetic scaffold bearing an arginine-like side chain and a tosyl-related aromatic sulfonyl group in the parent TAME motif; in the proTAME form, additional ester/alkyl groups are appended to reduce polarity until intracellular cleavage. Exact atom-connectivity for this item is not specified here; consult CoA/Spec Sheet or primary literature for definitive structure.
Note: Where exact identifiers are needed for registration or method development, obtain the item-specific CoA/Spec Sheet for authoritative structural data.
Synthetic Utility
proTAME is a finished bioactive probe and is not typically employed as a synthetic intermediate or reagent.
Not a building block: Due to its complex, prodrug-oriented structure tailored for biological uptake and target engagement, it is not commonly used in stepwise chemical synthesis or as a catalyst/ligand.
If derivatization is desired (e.g., to generate tool analogs or tagged probes), custom medicinal chemistry is usually undertaken starting from known TAME analogs or by reconstructing the prodrug masking strategy rather than modifying a finished proTAME sample.
Researchers seeking reagents for organic synthesis should consult other catalog categories (e.g., protected amino acids, coupling reagents, heteroaromatic building blocks), whereas this listing serves chemical biology applications.
Target Specificity
Only item-specific target data from the product page may be listed here. For this SKU, target specificity details are not provided.
Target/Pathway: Not specified for this item; refer to CoA/Spec Sheet.
Species reactivity, selectivity profile, and off-target screening: Not specified for this item; refer to CoA/Spec Sheet.
For study design, consult primary literature on proTAME and perform in-house validation with appropriate controls.
よくある質問
What is Moligand??
Moligand? is one of Aladdin Scientific's premium product lines, formulated for high-purity applications across multiple workflows. Compared to standard grades in the same workflow, Moligand? products typically offer tighter specifications, more rigorous QC, and stronger lot-to-lot consistency.
How should this product be stored?
Store at ?80 °C. Ultra-low temperature storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships frozen with dry ice and cold packs. Unpack on arrival and transfer it to the storage condition stated above; handle dry ice with insulated gloves in a ventilated area.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1362911-19-0.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.