グレード&純度BioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.for Cell culture?Cell-culture grade — low endotoxin and contaminants to support viable cell growth. Use in mammalian/other cell culture media and supplements.Sterile?Sterile grade — processed and verified free of viable microorganisms. Use directly in aseptic procedures and cell culture without further sterilization.100mg/mL in water
Storage
Store at -20°C,Avoid repeated freezing and thawing
Protamine Sulfate is a basic protein sulfate extracted and purified from fresh mature sperm of fish. It is rich in arginine residues and carries a large number of strongly basic groups. This product binds electrostatically to heparin, an acidic mucopolysaccharide, forming a stable complex that neutralizes heparin's anticoagulant activity. It is suitable for research purposes such as anticoagulation neutralization of heparin-containing samples and removal of heparin activity.
Instructions for Use
1.Add this product to heparin-containing samples at an appropriate ratio according to experimental needs. Mix thoroughly and let stand at room temperature for several minutes.
2.For first-time use, determine the optimal amount through a preliminary experiment. Close the cap tightly immediately after use.
Precautions
1.This product is for research use only. It must not be used for clinical diagnosis or treatment, nor in food or pharmaceuticals.
2.For your safety and health, wear a lab coat and disposable gloves during operation.
3.Use the reagent as soon as possible after opening. Do not use if the solution appears turbid, discolored, or contains precipitate.
仕様
仕様と純度
BioReagent, for Cell culture, Sterile, 100mg/mL in water
安定性と保管
Store at -20℃ long term (12 months). Avoid repeated freeze-thaw cycles.
保管条件
Store at -20°C,Avoid repeated freezing and thawing
入荷
Ice chest + Ice pads
この製品は冷冷この冷このこの製品の運送が必要です。地上およびその他の経済サービスは利用できません。
等級
BioReagent, ステリル, 細胞培養用
Product Line
P1528882-5ml
詳細データ
証明書(CoA、COO、BSE/TSEと分析図)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
ソリューション計算機
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
レビュー
顧客レビュー
Application Protocols
The following are literature-style, research-use examples. Adapt to your system and validate. No performance claims are made for this item.
Removal of nucleic acids from protein lysates
Prepare cleared lysate in low-salt buffer (e.g., 20–50 mM Tris, pH 7.5, 50–150 mM NaCl).
Add Protamine Sulfate Solution (10%) dropwise to reach 0.5 mg/mL final. Mix gently for 10 min at room temperature.
Centrifuge 10,000–20,000 × g for 10 min. Collect supernatant; verify protein activity. If protein loss occurs, reduce protamine concentration or increase NaCl.
Enhancement of lentiviral transduction (in vitro)
Seed cells 12–24 h prior to transduction.
Prepare virus-containing medium and add protamine to 5–8 µg/mL final.
Replace culture medium with virus/protamine mix. Optionally centrifuge plates at low speed (“spinoculation”) if appropriate for your system.
Incubate 6–24 h, then replace with fresh medium. Assess transduction efficiency after 48–72 h. Titrate 2–10 µg/mL to optimize.
Heparin neutralization assay (biochemical)
In PBS (pH 7.4), combine fixed heparin amount with increasing protamine aliquots.
Mix and incubate 5–10 min. Monitor complexation by turbidity at 500–600 nm or by electrophoretic mobility.
Determine the charge-neutralization point empirically; confirm reversibility by raising ionic strength.
Sterility note
If aseptic workflows are required, filter-sterilize working solutions (0.22 µm) using sterile technique unless sterility is confirmed on the CoA.
Biological Roles
General biology (literature)
Natural function: Protamines are small, arginine-rich nuclear proteins that replace histones in the haploid phase of spermatogenesis, enabling extreme condensation of DNA in mature spermatozoa.
Molecular features: High density of guanidinium groups confers strong, cooperative binding to the phosphate backbone of nucleic acids via electrostatics and hydrogen bonding.
Sulfate counterion: Provides charge balance and enhances aqueous solubility; does not confer specific biological activity.
Research context
Model polyelectrolyte: Used to study electrostatic-driven assembly with DNA/RNA and glycosaminoglycans (e.g., heparin, dermatan sulfate), phase separation, and condensate formation in vitro.
Cell culture: As a cationic additive, protamine can influence membrane interactions and endocytosis-like uptake pathways, impacting delivery of nucleic acids and viral vectors (optimize dose to avoid cytotoxicity).
Enzyme/DNA interactions: By compacting or sequestering nucleic acids, protamine can modulate in vitro readouts of nucleases, polymerases, or nucleic acid–binding proteins, and is sometimes used to reduce background nucleic acids in lysates.
Note
These roles describe protamine biology and research applications broadly and are not product-specific performance claims.
Buffer Applications
Not typically applicable
Protamine sulfate is not a buffering agent. It is a strongly cationic polypeptide used for complexing polyanions rather than maintaining pH.
Related practical notes (literature)
If adding to buffered solutions (e.g., PBS, HEPES), be aware that phosphate and other anions may participate in complexation and can influence turbidity and precipitation. Maintain consistent ionic strength across experiments.
For assays requiring precise pH control, prepare the buffer first, verify pH, then add protamine last while monitoring for precipitation.
Green Alternatives
Context
As an aqueous 10% peptide solution, this product already avoids volatile organic solvents. Green-chemistry considerations focus on minimizing waste, ensuring biodegradability, and reducing hazards in downstream processes.
Options and tradeoffs (general literature)
Alternative polycations: Poly-L-lysine or chitosan can substitute for certain nucleic acid precipitation or surface-coating tasks. Tradeoffs include differences in biocompatibility, strength of binding, and reversibility.
Process intensification: Using concentrated stock (e.g., 10%) reduces storage volume and packaging. Prepare only the amount needed to minimize disposal.
Buffer selection: Prefer neutral, low-toxicity buffers (e.g., PBS without azide) and avoid heavy-metal-containing additives. Optimize ionic strength to achieve effects with minimal reagent.
Small comparison (general)
Protamine sulfate: Strong, rapid complexation with polyanions; widely used; animal-derived (typical sourcing) may not suit all sustainability policies.
Poly-L-lysine (synthetic/fermentation-derived): Renewable routes possible; somewhat less potent polyanion binding than arginine-rich protamines.
Chitosan: Biopolymer from crustacean sources; requires acidic conditions for solubility; variable batch-to-batch properties.
Note
Selection should balance performance, source sustainability, and regulatory preferences for your lab/institution.
Pharmaceutical Uses
Scope note
This product is for research use only. No clinical or therapeutic use is intended or implied.
Formulation/bioprocess research context (literature)
As a polyelectrolyte excipient in research, protamine sulfate is explored for complex coacervate formation with nucleic acids or anionic polymers to tune viscosity, clarify solutions, or modulate release characteristics in prototype formulations.
In protein and vaccine process development, protamine can be used experimentally to reduce residual nucleic acids in upstream materials or to assist flocculation/clarification steps prior to filtration.
Caveats
Composition (peptide distribution, counterion content) and bioburden/endotoxin profiles are critical in formulation experiments; verify with the lot-specific CoA where available. This listing does not provide pharmacopeial status or clinical-grade assurances.
Physical Properties
Item-specific facts (from Product Data)
Physical state/appearance: Not specified for this item; refer to CoA/Spec Sheet.
pH, osmolality, refractive index, viscosity: Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Nature of product: Aqueous 10% (w/v) solution of a cationic peptide mixture as sulfate salt; behaves as a polyelectrolyte solution with strong ionic interactions.
Solubility: Protamine sulfate is highly soluble in water and saline; insoluble in most organic solvents (literature).
Charge properties: Strongly basic (high isoelectric point) due to multiple arginine residues; forms stable complexes with polyanions (literature).
Thermal behavior: As an aqueous solution, bulk phase change reflects that of water; drying leads to an amorphous peptide solid that can char/decompose before melting (literature). These are general observations for peptide salts and are not product specifications.
Notes
For exact pH, conductivity, and density of this lot/formulation, consult the product’s CoA/SDS. Avoid assuming small-molecule solvent-like properties; the rheology and ionic strength can vary with concentration and counterion content.
Quality and Grades
Item-specific facts (from Product Data)
Grade: BioReagent
What BioReagent typically implies (general guidance)
Intended for research and laboratory applications, including molecular biology, cell culture (when sterile/low endotoxin), and biochemical assays. BioReagent grade emphasizes functional performance over trace-metal or optical specifications typical of analytical/solvent grades.
Typical expectations: Controlled bioburden and impurities appropriate for research; may include lot-specific data such as pH, conductivity, and sterility/endotoxin where relevant. For this specific item, any such values are Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers and formulation
No stabilizers, preservatives, or buffers are specified in the Product Data. If your assay is sensitive to salts or biocides, verify composition on the CoA/SDS.
Lot qualification
For reproducible biological outcomes (e.g., cell transduction enhancement, nucleic acid precipitation), verify lot-to-lot activity in a small-scale pilot. Retain lot numbers for data traceability.
Reaction and Applications
Scope (research-use, literature examples)
Polyanion complexation: Protamine sulfate binds and precipitates nucleic acids (DNA/RNA) and glycosaminoglycans (e.g., heparin) through multivalent electrostatic interactions. Used to remove nucleic acids from protein preps or to concentrate/clarify lysates.
Cell and virus handling: Commonly used as a polycationic additive to enhance adsorption/transduction of enveloped viral vectors (e.g., retro-/lentiviral systems) in cell culture by promoting virus–cell proximity (literature). Optimize concentration to balance efficacy and cell viability.
Chromatography/clarification: Useful as a flocculant to reduce viscosity of nucleic acid–rich solutions and aid downstream filtration/centrifugation.
Enzymology: Can modulate activities of polyanion-binding enzymes in vitro by sequestering inhibitory nucleic acids (application-specific; validate).
Practical tips
Titration: Start with low microgram-per-milliliter to low milligram-per-milliliter ranges depending on application; excessive protamine can cause irreversible precipitation or cytotoxicity in cells.
Order of addition: Add protamine slowly to the polyanion-containing solution with mixing to control complex formation and particle size. Ionic strength and pH critically influence outcomes.
Clarification: After complexation, remove precipitates by centrifugation or filtration. For reversible interactions, adjust salt or pH to dissociate complexes.
Notes
No specific performance claims are made for this item; optimize conditions empirically for your workflow.
Reaction Conditions
General, literature-based guidance (research use; optimize per system)
Nucleic acid precipitation from lysates: Add protamine sulfate to a final concentration of 0.1–1 mg/mL while vortexing; incubate 5–15 min at room temperature; clear by centrifugation at 10,000–20,000 × g for 5–10 min. Adjust ionic strength (e.g., 50–150 mM NaCl) to modulate selectivity.
Heparin neutralization in vitro assays: Titrate protamine against a fixed heparin amount in buffered saline at pH ~7.2–7.4, monitoring complex formation by turbidity or charge-neutralization assays. Stoichiometry is strongly system-dependent; start near charge equivalence and refine.
Viral transduction enhancement (cell culture): Typical screening range is 2–10 µg/mL in complete medium; add to cells with viral inoculum and incubate 2–24 h before media change. Verify cell-type tolerance and optimize to minimize cytotoxicity. Perform all cell culture steps under sterile conditions.
Polyelectrolyte assembly: For nanoparticle/coacervate formation with DNA/RNA, mix components at defined N/P ratios (amine to phosphate); explore N/P ~2–10 at low ionic strength, then adjust salt to stabilize or destabilize complexes as needed.
Notes
These conditions are literature examples and not product specifications. Always verify compatibility with your cells, proteins, and assay components.
Safety and Handling
Item-specific facts (from Product Data)
GHS classification, signal word, H-statements, pictograms: Not specified for this item; refer to SDS.
Storage conditions: Store at 2–8°C (do not freeze unless validated for your workflow).
Shipment: Shipped on wet ice (per Product Data).
General safety guidance (literature/standard lab practice)
Hazards: Proteinaceous materials may cause allergic or respiratory sensitization in susceptible individuals. Protamine sulfate is strongly cationic and may cause irritation to skin, eyes, and mucosa upon contact. Handle solutions to avoid aerosol formation.
PPE: Wear lab coat, nitrile gloves, and safety glasses/goggles. Use appropriate containment (biosafety cabinet) if preparing sterile solutions or working with viral vectors/cell culture.
Engineering controls: Work in a well-ventilated area; employ BSC when handling in biological workflows.
Incompatibilities: Strong polyanions (e.g., heparin, nucleic acids, anionic detergents) will form tight complexes/precipitates with protamine; avoid unintended mixing. Avoid strong oxidizers.
First aid (overview; defer to SDS): In case of skin/eye contact, rinse with water for several minutes. If inhaled, move to fresh air. If ingested, rinse mouth with water. Seek medical attention if symptoms persist.
Spill response: Absorb with inert material, collect, and dispose in accordance with institutional and local regulations. Decontaminate with water; surfactant may aid cleanup.
Always consult the latest SDS for authoritative hazard classifications and response measures.
Solvent Selection
Applicability to this product
This product is supplied as a prepared aqueous solution (10%); traditional organic solvent selection is not typically applicable.
General guidance (literature)
Solvent/base medium: Water or physiological buffers (e.g., PBS, HBSS) are compatible, but note that protamine strongly complexes with polyanions (phosphate, heparin, nucleic acids). Complexation may induce turbidity or precipitation depending on ionic strength and pH.
pH and ionic strength: Complex formation with polyanions is enhanced at lower ionic strength and near-neutral pH. High salt can screen interactions and reduce complexation.
Miscibility: Readily miscible with water and aqueous buffers; not miscible with most organic solvents. If blending with organic cosolvents (e.g., for transduction cocktails), keep the organic fraction low and validate stability/compatibility.
When to choose this item vs alternatives
Choose an aqueous 10% solution when convenience, accurate dosing, and sterility (if provided) are needed. Choose solid protamine sulfate when custom concentrations, lyophilization, or alternative counterions are required. Polybrene (hexadimethrine bromide) is a common alternative polycation for some cell-culture workflows; performance tradeoffs exist and should be empirically determined.
Storage and Reconstitution
Item-specific facts (from Product Data)
Storage: Store at 2–8°C.
Shipping: Shipped on wet ice.
Handling guidance (general)
Avoid repeated warming/cooling cycles. For frequent use, aliquot aseptically into working volumes to limit contamination and preserve consistency.
Do not freeze unless your validated protocol confirms no loss of performance upon freezing; some peptide solutions may precipitate or show activity changes after freeze–thaw.
If visible precipitate forms upon cold storage, allow to equilibrate to room temperature and mix gently to redissolve. If insoluble material persists, clarify by brief centrifugation or 0.22 µm filtration.
Reconstitution: Not applicable—this product is supplied as a ready-to-use 10% solution. If dilution is required, use sterile water or appropriate buffer; confirm that buffer components (especially polyanions) do not cause unintended complexation.
Shelf-life and specs
Specific shelf-life, pH, and preservative content are Not specified for this item; refer to CoA/Spec Sheet. Always record open date and lot number, and inspect for turbidity, color change, or microbial growth prior to use.
Structure and Identity
Item-specific facts (from Product Data)
Product: Protamine Sulfate Solution (10%)
Grade: BioReagent
Concentration: 10% solution (as named item)
CAS, CID, InChIKey, SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula and molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
General chemistry/biochemistry (literature)
Protamine sulfate is a mixture of short, highly basic, arginine-rich polypeptides (commonly sourced from fish sperm). The sulfate counterion balances the high cationic charge density of the protamine peptides.
Structural features: Dominated by L-arginine residues (guanidinium side chains), typically with minor amounts of other amino acids; lacks defined tertiary structure in dilute aqueous salt but strongly binds polyanions (e.g., DNA, RNA, heparin) via electrostatic interactions and hydrogen bonding.
Because it is a heterogeneous peptide mixture rather than a single small molecule, conventional line notations (SMILES, InChI) and a single exact molecular formula are not applicable.
2D description in words: Linear cationic peptide chains composed largely of –(Ala/Lys)-Arg– repeats with multiple guanidinium groups; formulated as sulfate salts to improve solubility and stability in water.
Synthetic Utility
Not a classical synthetic building block
Protamine sulfate is a heterogeneous peptide mixture supplied as an aqueous solution; it is not typically used as a reagent or substrate in small-molecule synthetic transformations.
Relevant laboratory utility (literature)
Acts as a macromolecular, polycationic “reagent” to precipitate nucleic acids and anionic biopolymers, aiding sample cleanup prior to analytical or preparative steps.
Can serve as a component in materials synthesis (e.g., formation of polyelectrolyte multilayers, nanoparticles with DNA/RNA or anionic polymers) where its cationic nature drives assembly.
For small-molecule synthesis tasks that require bases, nucleophiles, or phase-transfer agents, alternative reagents should be selected; see appropriate sections in solvent/reagent catalogs.
Target Specificity
Not applicable
This product is not an antibody or affinity reagent with defined antigen specificity. It is a polycationic peptide mixture that binds polyanions (e.g., nucleic acids, heparin) primarily via electrostatic interactions rather than sequence-specific recognition.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.