Silver ink - 75 wt%, LIFT printable

Cat. No.: S466789

グレード＆純度 75 wt%, LIFT printable

Synonyms

Ag ink, Laser induced forward transfer

Storage

Room temperature

Shipped In

Normal

概要

Description

This Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.The ink offers:Uniform and reproducible donor layer with low drying speedStable accurate jetting in different types of laser systems, wide working window of jetting parametersHigh speed printing (20-50kHz), allowing high throughputNarrow patterning on plastic and glass substrates (line width ∼50 μm, height ∼0.5 μm, spacing ∼50 μm)Laser sintering of LIFT printed pattern, providing good electrical propertiesFit for:LIFT digital printingAdditive electronic manufacturingPrinted electronics: RFID, FPD, SensorsLaser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.

仕様

同義語

Ag ink, Laser induced forward transfer

仕様と純度

75 wt%, LIFT printable

安定性と保管

Keep container tightly closed. Store at room temperature, do not heat above 60 °C and do not freeze.

法的情報

Lumisizer is a trademark of LUM GmbH

保管条件

Room temperature

入荷

Normal

よくある質問

How should this product be stored?

Store at room temperature.

How is this product shipped?

This product ships under standard ambient conditions. No temperature-controlled packaging is required.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.