"}

TNT Buffer (10×) - sterile-filtered, BioReagent, Suitable for molecular biology, 10×

在庫あり
SKU
T476217
グループ製品アイテム
製品名 個数
[T476217-500ml] TNT Buffer (10×) (500ml)
$19.90

  Tris-NaCl-Tween Buffer, abbreviated as TNT Buffer, is a commonly used buffer in molecular biology and hybridization experiments. It mainly consists of 100 mM Tris-HCl (pH 8.0), 1.5 M NaCl, and 0.5% Tween. The product is prepared through strict sterilization by filtration with a 0.45 μm pore size membrane. This product is a 10× concentrated solution; after filtration sterilization, it only needs to be diluted to the working concentration with sterile distilled water or deionized water before use.
Operating Steps:
1. Dilute to 1× with distilled water or deionized water.
2. Use the diluted buffer for washing as required by the experiment.
Precautions:
1. After opening the reagent, use it as soon as possible to avoid affecting the results of subsequent experiments.
2. This product is limited to scientific research use by professional personnel. It shall not be used for clinical diagnosis or treatment, nor for food or pharmaceuticals, and shall not be stored in ordinary residential premises.
3. This product does not contain highly toxic substances; however, for your safety and health, please wear a lab coat and disposable gloves during operation.

その他の情報

その他の情報
集中10×
同義語TRIS NaCl Tween 20 buffer solution | Tris-NaCl-Tween buffer | 10X TNT Buffer
仕様と純度sterile-filtered, BioReagent, Suitable for molecular biology, 10×
安定性と保管Store at room temperature long term (12 months).
法的情報TWEEN is a registered trademark of Croda International PLC
保管条件Room temperature
入荷Normal
Product Description

  Tris-NaCl-Tween Buffer, abbreviated as TNT Buffer, is a commonly used buffer in molecular biology and hybridization experiments. It mainly consists of 100 mM Tris-HCl (pH 8.0), 1.5 M NaCl, and 0.5% Tween. The product is prepared through strict sterilization by filtration with a 0.45 μm pore size membrane. This product is a 10× concentrated solution; after filtration sterilization, it only needs to be diluted to the working concentration with sterile distilled water or deionized water before use.
Operating Steps:
1. Dilute to 1× with distilled water or deionized water.
2. Use the diluted buffer for washing as required by the experiment.
Precautions:
1. After opening the reagent, use it as soon as possible to avoid affecting the results of subsequent experiments.
2. This product is limited to scientific research use by professional personnel. It shall not be used for clinical diagnosis or treatment, nor for food or pharmaceuticals, and shall not be stored in ordinary residential premises.
3. This product does not contain highly toxic substances; however, for your safety and health, please wear a lab coat and disposable gloves during operation.

レビュー

顧客レビュー

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.

Copyright © 2023-present Aladdin Scientific Corp All rights reserved.