TPE Buffer (10×) - BioReagent, for NA electrophoresis, 10×

Cat. No.: T301544

GRADE & PURITY BioReagent, for NA electrophoresis, 10×

Synonyms

Tris-Phosphate-EDTA Buffer

Storage

Room temperature

Shipped In

Normal

Application

NA electrophoresis

概要

  Tris-Phosphate Electrophoresis Buffer, abbreviated as TPE Buffer, is commonly used in RNA gel electrophoresis. It mainly consists of 900 mM Tris-phosphate, 20 mM EDTA, and other components. This product is a 10× concentrated solution and needs to be diluted to 1× TPE with distilled water or deionized water before use.
Operating Steps:
1. Dilute to 1× with distilled water or deionized water.
2. Dissolve agarose in 1× TPE, heat to melt it. After cooling to 55°C, add the dye, then cool to room temperature.
3. Load the sample and perform electrophoresis.
Precautions:
1. After opening the reagent, use it as soon as possible to avoid affecting the results of subsequent experiments.
2. This product is limited to scientific research use by professional personnel. It shall not be used for clinical diagnosis or treatment, nor for food or pharmaceuticals, and shall not be stored in ordinary residential premises.
3. This product does not contain highly toxic substances; however, for your safety and health, please wear a lab coat and disposable gloves during operation.

Specifications

同義語

Tris-Phosphate-EDTA Buffer

仕様と純度

BioReagent, for NA electrophoresis, 10×

安定性と保管

Store at room temperature long term (12 months).

保管条件

Room temperature

入荷

Normal

等級

BioReagent, for NA electrophoresis