UV curable resin - rapid cure

Cat. No.: U475768

GRADE & PURITY rapid cure

Synonyms

CPS 1040 UV

Storage

Store at 2-8°C

Shipped In

Wet ice

概要

Storage:The storage temperature should not exceed 35 °C.Keep tightly closed. Store in a cool, dry, well-ventilated area.Do not expose to ultraviolet light.High temperatures (>80 °C), pressure, and contamination with peroxides may result in auto-polymerization of the product.Unstable upon depletion of inhibitor.Cures extremely rapidly to form a glassy, high modulus materialExcellent for use in optical applicationsHigh refractive index - 1.54High impact absorptionNon-yellowingNo oxygen inhibition.Mechanical properties after curing:Modulus*: 930 MPaStrength*: 34 MPaElongation*: 13%Pencil Hardness: 6HTack Free**: <2 min*Test Resources: tensile tester, 35 mm gauge length, 1.0 mm thickness, 6.5 mm width.** Cured under stated intensity. Medium pressure mercury bulb with 320-500 nm filter. Adhesion tests were conducted using a cross hatch tape test on films 0.125 mm thick on glass and PET. Material Data using ASTM D 638-02a.

Specifications

同義語

CPS 1040 UV

仕様と純度

rapid cure

保管条件

Store at 2-8°C

入荷

Wet ice

この製品は冷冷この冷このこの製品の運送が必要です。地上およびその他の経済サービスは利用できません。

よくある質問

How should this product be stored?

Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.

How is this product shipped?

This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.