This compound belongs to the class of organic compounds known as phenol ethers. These are aromatic compounds containing an ether group substituted with a benzene ring.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
Not applicable. No validated bioassay protocols (WB, IHC, IF, FC) are associated with this small-molecule reagent in the Product Data.
For synthetic usage, see the Reaction Conditions and Application notes provided in other sections.
Biological Roles
This product is a synthetic aromatic ether building block and does not have a primary biological role. No biological function is specified for this item in the Product Data.
General context (chemistry/biochemistry knowledge):
Dialkoxybenzenes are structural motifs present in lignin-derived aromatics and in some natural products after O-alkylation, but 1,2-diethoxybenzene itself is typically a laboratory intermediate rather than a metabolite.
After deprotection to catechol, derivatives can participate in redox cycling (catechol/o-quinone interconversion), metal chelation, and enzyme interactions (e.g., as substrates/inhibitors in phenol-oxidizing systems). These are properties of catechol derivatives broadly and not specific to this exact dialkoxy compound.
Usage note: For research use only, as stated in the Product Data. No clinical or therapeutic claims are made or implied.
Buffer Applications
Not typically applicable. 1,2-Diethoxybenzene is a hydrophobic aromatic ether and is not used to prepare aqueous buffer systems or to control pH.
For relevant guidance, see the Reaction & Applications and Synthetic Utility sections for how this reagent is employed in organic synthesis.
Green Alternatives
Selection of protecting groups and solvents around 1,2-diethoxybenzene can impact process greenness. Considerations (literature/general):
Protecting group choice for catechols:
Ethyl ethers are robust but often require BBr3 or HBr for cleavage (corrosive, waste-intensive). Greener alternatives include carbonate-type protections (e.g., cyclic carbonates) or acetal/ketal-derived protection that can be removed under milder, aqueous-acidic conditions.
Benzyl ethers allow catalytic hydrogenolysis (H2, Pd/C), avoiding halogenated Lewis acids, but introduce flammability and metal-catalyst use.
Methoxy groups (veratrol) cleave more readily than ethoxy, potentially with milder conditions; however, methanol byproduct handling and selectivity must be managed.
Solvent choices during transformations:
Replace dichloromethane in dealkylations with greener ethers (2-MeTHF) or esters (EtOAc) where compatible with the reagent system; note that BBr3 often requires halogenated solvents for stability—trade-off is real.
For EAS or acylations, toluene or anisole can replace chlorinated solvents; CPME or 2-MeTHF can substitute for THF in some low-temperature steps.
Oxidation routes:
Use oxygen or H2O2 with suitable catalysts in place of stoichiometric heavy-metal oxidants where feasible; however, controlling selectivity on highly activated rings may be challenging.
Simple comparison (general):
Ethyl ethers (this item): Robust, high stability; harsher deprotection (BBr3/HBr).
Benzyl ethers: Easy hydrogenolysis; requires H2/Pd and hydrogen infrastructure.
Carbonates/Acetals: Potential aqueous/acidic cleavage; may be less stable to base/heat.
Pharmaceutical Uses
Item-specific pharmacopeial status or excipient use is not provided; this compound is offered for research use only.
General context (chemistry knowledge):
1,2-Diethoxybenzene may serve as a synthetic intermediate in the preparation of active pharmaceutical ingredient (API) building blocks where a catechol motif is needed but must be masked during earlier steps. The ethyl ether can be removed at late stage to reveal the phenolic diol.
It is not commonly used as an excipient due to hydrophobicity and lack of approved status as a formulation aid.
Process development notes:
Consider deprotection compatibility with downstream functionality (BBr3/BCl3 sensitivity) when planning routes that use this protected catechol.
Residual solvent and reagent limits (e.g., boron species after BBr3) should be addressed through quench/neutralization and robust workup, followed by appropriate ICH-compliant analytical release testing when used in process research.
Physical Properties
Item-specific specs are not provided in the Product Data; consult the CoA/Spec Sheet for authoritative values. The following are literature values for 1,2-diethoxybenzene and are provided for reference only (not product specifications):
Appearance: Typically a colorless to pale yellow liquid (literature).
Boiling point: ~245–250 °C at 1 atm (literature reports vary by source and purity).
Melting point: Often reported as below room temperature; many sources list it as a liquid at ambient conditions (literature).
Density: ~1.05–1.10 g/mL at 20–25 °C (literature range).
Refractive index (n20 D): ~1.510–1.525 (literature range).
Vapor pressure: Low at ambient temperature (literature qualitative).
LogP (octanol/water): Expected >2 due to two ether substituents and aromatic core (literature/estimated).
Solubility:
Water: Very low (hydrophobic aromatic ether; literature qualitative).
Organic solvents: Miscible with common organic solvents such as dichloromethane, chloroform, ether, THF, acetone, toluene, and other aromatics (literature/general).
Notes and cautions:
Physical constants can shift with impurity content, stabilizers, or dissolved gases. Always measure or confirm prior to critical process design.
If using distillation for drying or purification, employ an appropriate fractionation column due to the relatively high normal boiling point and potential overlap with high-boiling impurities.
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on grades and implications (general chemistry knowledge):
Analytical/AR grade emphasizes low inorganic/organic contaminants; suitable for most synthetic uses and analytics where ultra-low background is not required.
High-purity or HPLC grade solvents/reagents control UV-absorbing impurities and particulates; while this compound is primarily a building block rather than a chromatography solvent, low-UV/background can matter when it is used as an internal standard or in photochemical studies.
Water and peroxide specifications are meaningful for ethers used as solvents; for aryl ethers like 1,2-diethoxybenzene, water content still affects moisture-sensitive reactions (e.g., BBr3 dealkylation), but peroxide specs are typically less critical compared with dialkyl ethers.
Verification best practices:
Confirm identity by 1H/13C NMR (look for characteristic ethoxy triplets/quartets and aromatic pattern consistent with ortho-disubstitution), GC–MS or LC–MS (M+ at m/z ~166), and IR (Ar–O–C stretching around 1200–1050 cm−1).
If trace acid/base can impact downstream steps, perform simple acid/base neutrality tests or titration; consider distillation or short-path purification for critical applications.
Reaction and Applications
1,2-Diethoxybenzene functions as an electron-rich, ortho-disubstituted arene and as a protected catechol equivalent. Typical applications (literature/general):
Protected catechol synthon: The aryl–O–ethyl groups can be cleaved to regenerate catechol. BBr3, BCl3, AlCl3/thiols, or HBr/AcOH under controlled conditions effect dealkylation, enabling access to catechols that might otherwise oxidize or polymerize.
Oxidation to o-quinones: Its electron-rich ring undergoes oxidation (e.g., with ceric ammonium nitrate (CAN), silver oxide, DDQ, or Fremy’s salt), furnishing o-quinones or dealkylated quinonoid species used in redox mediators and Diels–Alder dienophiles.
Electrophilic aromatic substitution (EAS): The two alkoxy groups activate and direct strongly ortho/para; nitration, halogenation, sulfonation, and Friedel–Crafts acylation occur more readily than on benzene. Ortho crowding influences regioselectivity—para positions relative to each alkoxy are favored when sterics dominate.
Directed metalation (under forcing conditions): While alkoxy groups are weaker directors for lithiation than amides, low-temperature metalation adjacent to alkoxy groups can be achieved with strong bases (e.g., s-BuLi/TMEDA), enabling subsequent electrophile trapping.
Cross-coupling after prefunctionalization: Halogenation (e.g., NBS/NCS or Sandmeyer routes from anilines obtained by nitration/reduction) enables Suzuki, Buchwald–Hartwig, or Kumada couplings on the activated ring.
Tips:
Maintain anhydrous conditions for dealkylation (BBr3) to minimize side reactions.
Control temperature carefully during EAS to manage overreaction due to strong activation.
For oxidation, monitor closely (TLC/UV–vis) to avoid overoxidation to tars.
Reaction Conditions
General literature guidance (not item specifications):
Ether deprotection to catechol:
Reagent: BBr3 (1.0–3.0 equiv per ether group) in dry CH2Cl2.
Temperature: −78 to 0 °C for addition; then 0 to rt for 1–16 h depending on substrate.
Workup: Careful methanol/water quench at 0 °C; extract and neutralize boron residues.
Notes: BCl3 is milder; HBr/AcOH under reflux can also cleave ethyl aryl ethers but may be slower/less selective.
Oxidation to o-quinone (example with CAN):
Solvent: MeCN/H2O or MeOH.
Conditions: 0 to rt; stoichiometric CAN; monitor by TLC/UV–vis (appearance of quinone bands in visible range).
Alternative oxidants: Fremy’s salt (K2NO(SO3)2), Ag2O, or DDQ depending on selectivity needs.
Electrophilic aromatic substitution:
Nitration: Dilute HNO3/H2SO4 at 0–5 °C to control polysubstitution; strongly activated ring—use limiting reagent.
Halogenation: NBS/NCS in the presence of Lewis acids or via electrophilic Br2/Cl2 under controlled, low-temperature conditions.
Friedel–Crafts acylation: Acyl chloride/AlCl3 in inert solvent (e.g., DCM, CS2, or nitrobenzene); sterics influence regiochemistry.
Directed metalation (advanced):
Base: s-BuLi/TMEDA at −78 to −40 °C in THF/hydrocarbon mixtures; quench with electrophiles (CO2, aldehydes, halides). Requires careful optimization due to competitive ortho/benzylic sites.
Yields are substrate- and condition-dependent; consult primary literature for specific transformations.
Safety and Handling
Item-specific hazard statements, GHS classification, and pictograms are not provided in the Product Data; refer to the SDS for definitive safety information.
General safety considerations for aromatic ethers (chemistry knowledge):
Hazards: Combustible liquid; may cause skin/eye irritation and respiratory irritation upon vapors/aerosols. Low acute toxicity is typical for related dialkoxybenzenes, but avoid ingestion, inhalation, and prolonged skin contact.
Peroxide formation: Aryl ethers are generally far less prone to peroxide formation than dialkyl ethers; however, best practice is to store away from air/UV if long-term storage is anticipated and test prior to concentrating aged material.
Incompatibilities: Strong oxidizers (can lead to exothermic reactions/oxidation), strong Lewis/Brønsted acids (may catalyze cleavage), and strong bases under forcing conditions.
PPE: Lab coat, safety glasses or chemical splash goggles, and appropriate chemically resistant gloves (e.g., nitrile). Work in a fume hood to minimize inhalation exposure.
First aid (overview; follow SDS):
Skin: Wash with soap and water; remove contaminated clothing.
Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing.
Inhalation: Move to fresh air; seek medical attention if symptoms persist.
Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
Fire safety: Use CO2, dry chemical, or foam. Cool containers with water spray. Vapors may be heavier than air near heated sources.
Spill response: Absorb with inert material (vermiculite, sand), collect in chemical waste. Prevent entry into drains.
Solvent Selection
This material is predominantly used as a building block/intermediate rather than as a routine laboratory solvent.
Water immiscible; miscible with many organic solvents (aromatics, halogenated solvents, ethers, ketones).
When it is used as a medium: Its high boiling point (~245–250 °C, literature) and low polarity can be advantageous for high-temperature reactions requiring an inert aromatic ether, but practical use as a solvent is uncommon compared to toluene, anisole, or 1,2-dimethoxybenzene.
Comparison (literature/general):
Anisole: Lower bp (~154 °C), similar aryl-ether character; often preferred as an inert, mildly donating aromatic solvent.
1,2-Dimethoxybenzene (veratrol): Similar activation but lower bp (~206 °C) and slightly higher polarity; widely used as both substrate and sometimes medium.
Toluene: Inert, cheaper, lower bp (~111 °C); more common general-purpose aromatic solvent.
Practical recommendation:
Select 1,2-diethoxybenzene primarily as a reagent/substrate. For solvent duties, consider anisole or toluene unless the higher bp or specific solvation profile of the diethoxy derivative is required.
Storage and Reconstitution
Storage conditions (item-specific from Product Data): Store at room temperature.
Shipping (item-specific): Shipped under normal conditions.
General guidance (chemistry knowledge):
Keep container tightly closed under inert atmosphere (e.g., nitrogen) if long-term storage is anticipated, to limit slow oxidation or discoloration typical of electron-rich aromatics.
Protect from strong light/UV and sources of ignition. Store away from oxidizers and strong acids/bases.
If solid impurities precipitate on cooling or during aging, gentle warming and filtration through a small plug of silica/alumina can restore clarity; verify purity by NMR/GC before use in critical steps.
No reconstitution is required; use as supplied. If drying is necessary, sparge with inert gas and, if appropriate, subject to brief high-vacuum at ambient temperature to remove volatile moisture. Avoid prolonged heating near its high boiling point to prevent degradation.
Research Use Note: For research use only (as provided in the Product Data).
Structure and Identity
Aromatic diether building block (o-diethoxybenzene), useful as a protected catechol and activated arene for electrophilic substitution.
Item-specific identifiers from Product Data:
SKU: D155734
Product Name: 1,2-Diethoxybenzene
CAS: 2050-46-6
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Computed/literature structural identity (for reference; not item specification):
2D structural description: A benzene ring bearing two ethoxy substituents (–O–CH2–CH3) at adjacent (ortho) positions. The two alkoxy groups are strong electron-donors via resonance, activating the ring toward electrophilic substitution and directing new substituents ortho/para relative to each alkoxy.
Functional groups: Two aryl–O–alkyl ether linkages (alkoxy substituents on an aromatic ring). No stereocenters.
General notes on features (chemistry knowledge):
The ortho relationship can impart chelating ability to Lewis acids or metals via the two oxygen atoms (after coordination or deprotection), and influences regiochemistry in further substitutions.
As a dialkoxybenzene, it is a common precursor to o-quinones by oxidative demethylation/deethoxylation or direct oxidation of the electron-rich ring.
Synthetic Utility
Key roles in synthesis (literature/general):
Protected catechol equivalent: The two ethoxy groups mask the diol, allowing transformations incompatible with free phenols (e.g., acylations, cross-couplings, oxidations) without polymerization/oxidation of the catechol.
Electronic activation: Two alkoxy substituents donate electron density, accelerating electrophilic substitution (EAS). This facilitates regioselective functionalization, often favoring positions para to the alkoxy groups when sterics disfavor further ortho substitution.
Precursor to o-quinones: Oxidation of the dialkoxybenzene ring delivers o-quinones useful in Diels–Alder chemistry, redox mediators, and as electrophilic partners in nucleophilic additions.
Handle for orthogonal transformations: After selective monodealkylation (under careful control), one phenolic OH can be differentially protected (e.g., silyl, carbonate, benzyl), enabling stepwise diversification of catechol derivatives.
Platform for cross-coupling: Introduction of halogens or triflates on the activated ring (after suitable prefunctionalization) allows Suzuki, Negishi, Kumada, or Buchwald–Hartwig reactions to assemble biaryl or aryl–heteroatom linkages.
Practical tips:
Use anhydrous, halogenated solvents for BBr3-mediated ether cleavage; quench at low temperature to control exotherm and avoid borate gelation.
For EAS, moderate temperature and dilute conditions help prevent polysubstitution due to strong activation.
Consider protecting-group strategy early: ethyl ethers are robust under base but demand stronger acids to cleave compared with methyl or benzyl ethers.
Target Specificity
Not applicable. This product is a small-molecule reagent, not a biological targeting agent or antibody. No antigen/epitope, species reactivity, clone, or isotype information applies.
Domande frequenti
What is the purity of this product, and how is it determined?
This product is supplied at ≥98% purity, determined by gas chromatography (GC). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 2050-46-6, the molecular formula is C10H14O2, and the molecular weight is 166.22 g/mol. InChIKey QZYDOKBVZJLQCK-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.