Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Proprietà chimiche e fisiche
Peso molecolare
213.070 g/mol
XLogP3
3.200
Hydrogen Bond Donor Count
1
Hydrogen Bond Acceptor Count
1
Rotatable Bond Count
1
Exact Mass
211.984 Da
Monoisotopic Mass
211.984 Da
Topological Polar Surface Area
20.200 Ų
Heavy Atom Count
11
Formal Charge
0
Complexity
144.000
Isotope Atom Count
0
Defined Atom Stereocenter Count
0
Undefined Atom Stereocenter Count
0
Defined Bond Stereocenter Count
0
Undefined Bond Stereocenter Count
0
The total count of all stereochemical bonds
0
Covalently-Bonded Unit Count
1
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No biological assay or immunoassay protocols apply to this small-molecule building block. For synthetic applications, see Reaction Conditions and Synthetic Utility sections for representative procedures and optimization tips.
Biological Roles
This product is a synthetic organic building block and is not intended for biological use as supplied.
General context (not item-specific claims):
Phenolic scaffolds occur widely in natural products and can engage in hydrogen bonding and redox chemistry. Aryl bromides serve as synthetic handles rather than bioactive motifs per se.
Cyclopropyl substitution is a common medicinal chemistry tactic to modulate metabolic stability, steric footprint, and conformational bias, but any biological properties derive from the final analogs synthesized from this intermediate.
Research Use Note: For research use only.
Buffer Applications
Not typically applicable. 4-Bromo-2-cyclopropylphenol is a hydrophobic aryl building block rather than a buffering agent. If aqueous handling is needed (e.g., bioconjugation workup), the phenol can be deprotonated at high pH, but this is not its intended use. See Reaction & Applications and Synthetic Utility for relevant guidance.
Green Alternatives
Greener choices relate to solvent, base, and catalyst selection when employing this aryl bromide/phenol in synthesis.
Solvent substitutions:
Replace dioxane/DMF with 2‑MeTHF, CPME, or bio‑based EtOAc when feasible.
Employ aqueous micellar media (e.g., TPGS‑750‑M) for Suzuki couplings at ambient temperature, reducing organic solvent usage.
Bases:
Carbonates (K2CO3, K3PO4) in water/2‑MeTHF mixtures offer lower hazard profiles than strong alkoxides; avoid excess strong base to limit phenoxide-induced side reactions.
Catalysis:
Use low‑loading Pd catalysts (0.1–1 mol%) with modern ligands (XPhos, SPhos, P(tBu)3) or nickel catalysis where appropriate to lower precious-metal use.
Illustrative comparison (general):
Dioxane/water vs 2‑MeTHF/water for Suzuki
Safety: 2‑MeTHF is less problematic than dioxane (suspected carcinogen concerns for dioxane).
Performance: Similar conversions with suitable ligands; 2‑MeTHF has higher bp and improved phase behavior for biphasic systems.
DMF vs EtOAc or MeCN in O‑alkylation
Waste minimization and easier workup with EtOAc/MeCN; avoid DMF where not necessary.
Note: The compound itself is not a solvent; green chemistry choices focus on the surrounding reaction design and downstream purification (e.g., telescoping steps, avoiding silica by crystallization where possible).
Pharmaceutical Uses
No pharmacopeial/excipient role is specified for this item; it is supplied for research and development as a synthetic intermediate.
General notes (non-clinical):
Phenolic aryl bromides like this are commonly used in medicinal chemistry to access SAR around phenolic pharmacophores via cross-coupling and O‑derivatization.
Any use in drug substance or product manufacturing would require qualification to appropriate GMP specifications and impurity controls; this catalog item is intended for non-GMP research only unless otherwise stated (grade not specified for this item; refer to CoA/Spec Sheet).
Physical Properties
Item-specific specifications:
Boiling point, melting point, density, refractive index, purity grade, UV cutoff, water/peroxide/metal content: Not specified for this item; refer to CoA/Spec Sheet.
Literature/computed (informational only; not item specifications):
Expected physical state: low-melting solid or viscous oil typical of substituted phenols of similar size; exact mp/bp not widely reported in open literature for this exact substitution pattern.
Acid–base: phenolic OH is weakly acidic (typical pKa of phenols ~9–10; electron-withdrawing para-bromo can slightly lower pKa relative to phenol). Precise pKa for this structure not located in common databases.
Polarity/partitioning: presence of one phenolic OH suggests limited aqueous solubility at neutral pH and good solubility in polar aprotic and moderately polar organic solvents (e.g., EtOAc, THF, dioxane, MeCN); cyclopropyl and bromo increase lipophilicity (logP likely in the 2.5–3.5 range for analogous compounds; specific value not confirmed for this compound).
Solubility guidance (general):
Organic solvents: expected to dissolve in DCM, chloroform, toluene, THF, dioxane, acetone, and ethyl acetate; solubility typically improves upon gentle warming.
Aqueous: low at neutral pH; forms phenolate salts and becomes more water-soluble under basic conditions (e.g., pH > 11 with NaOH).
Always consult the product’s CoA/Spec Sheet for lot-specific values.
Quality and Grades
Item-specific details:
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on grades (general):
Research grade/bulk building block: Suitable for discovery chemistry, library synthesis, and route scouting. If HPLC/GC or spectroscopic grade is required (e.g., for photophysics or trace-metal–sensitive catalysis), specify or purify in-house (recrystallization, Kugelrohr, or flash chromatography) and verify by NMR/LC–MS.
Trace metals/halides: For Pd-catalyzed cross-coupling, low sulfur/amine impurities are beneficial; if your application is catalyst-sensitive, consider pre-washing or using scavengers post-reaction.
Stabilizers/additives:
None indicated for this item. If the presence/absence of stabilizers is critical (e.g., for polymerization studies), confirm by CoA.
Quality control suggestions (practical):
Identity: 1H/13C NMR (phenolic OH often broad/small; DMSO‑d6 can help), HRMS (M, M+2 for Br), IR (broad O–H ~3200–3600 cm−1).
Purity assessment: HPLC/GC where applicable; note phenolic tailing on silica—pre-treat silica with 1% NEt3 or use buffered mobile phases to improve peak shape.
Reaction and Applications
As an ortho-cyclopropyl, para-bromo phenol, this reagent is a versatile bifunctional handle for aromatic elaboration and scaffold diversification.
Key application families:
Cross-coupling via aryl bromide:
Suzuki–Miyaura: Couple with boronic acids/esters to install aryl, heteroaryl, or vinyl groups while retaining/derivatizing the phenol (or protected phenol).
Sonogashira: Introduce alkynes; useful for further cyclizations or click derivatives after hydration/oxidation.
Heck: Vinylation to forge C(sp2)–C(sp2) linkages on the aryl bromide site.
Negishi/Stille/Kumada: Alternative couplings where organozinc/stannane/magnesiate partners are preferred.
Phenol functionalization:
O‑Alkylation/arylation: Williamson ether synthesis (alkyl halides, sulfate esters); Ullmann or Buchwald protocols for aryl ethers.
O‑Acylation/sulfonylation: Generate esters/sulfonates (e.g., mesylate/tosylate) for protection or as leaving groups.
Protection: Convert to silyl (TBS), benzyl (Bn), or carbonate (Boc) protecting groups to enable cross-coupling without OH interference.
Directed ortho chemistry: Though already 2‑substituted, the phenolic OH can direct metalation at remaining ortho positions; the cyclopropyl at C2 modulates sterics/electronics, influencing regioselectivity in SEAr or metalation.
Cyclopropyl handle:
Acts as a compact, lipophilic substituent to tune potency/PK in medicinal chemistry.
Under strongly acidic or radical conditions, ring opening of cyclopropyl may be leveraged to access homoallylic motifs (strategic, not routine).
Practical tips:
Dry, oxygen-lean conditions favor Pd-catalyzed couplings; protect or neutralize the phenol (base or protecting group) to avoid catalyst inhibition.
Monitor for competitive O‑arylation vs C‑coupling in certain systems; ligand choice (e.g., XPhos/SPhos) mitigates.
Reaction Conditions
General literature guidance (illustrative; optimize per substrate and do not construe as item specifications):
Suzuki–Miyaura coupling (Ar–Br at C4):
Catalyst: Pd(PPh3)4 (1–3 mol%) or Pd2(dba)3 (1 mol%) with XPhos/SPhos (2–4 mol%).
Base: K2CO3, K3PO4, or Cs2CO3 (2–3 equiv).
Solvent: 1,4-dioxane/H2O, THF/H2O, or 2‑MeTHF/H2O.
Temperature/time: 60–100 °C, 2–16 h.
Notes: Protect or neutralize phenol (phenolate) to reduce catalyst inhibition; aqueous mixtures aid boron transmetalation.
Buchwald–Hartwig etherification (O‑arylation of a partner; this reagent supplies the aryl bromide):
Catalyst/ligand: Pd2(dba)3 or Pd(OAc)2 (1–2 mol%) with BrettPhos/XPhos (2–4 mol%).
Base: NaOtBu or Cs2CO3.
Solvent: Toluene, dioxane, or CPME.
80–110 °C, inert atmosphere.
Williamson ether synthesis (O‑alkylation of the phenol):
Base: K2CO3 or Cs2CO3 (2–3 equiv) in MeCN or acetone.
Alkylating agent: primary alkyl bromide/iodide or dimethyl sulfate; 20–60 °C, 2–12 h.
Caution: Competing C‑ vs O‑alkylation is minimal on neutral arenes; avoid strong bases that promote undesired side reactions.
Sonogashira coupling (Ar–Br):
Pd(PPh3)2Cl2 (1–2 mol%), CuI (2–5 mol%), Et3N or iPr2NH as base, THF or MeCN, 40–80 °C.
Halogen–metal exchange (advanced):
iPrMgCl·LiCl (Turbo Grignard) at −78 to 0 °C in THF, then trap with electrophiles; protect OH beforehand or work as magnesium phenolate.
Yields vary with partners and conditions; consult primary literature for close analogs.
Safety and Handling
Item-specific hazard data:
Signal Word, H-Statements, GHS Classification, Pictograms: Not specified for this item; refer to SDS.
General safety considerations for substituted phenols and aryl bromides (informational; defer to SDS):
Hazards: Phenolic compounds can be harmful by skin absorption, cause skin and eye irritation, and may cause respiratory irritation if aerosolized. Aryl bromides may cause irritation and are harmful if swallowed. Avoid contact and inhalation.
Peroxide formation: Not typically a peroxide-former (unlike ethers), but store away from strong oxidizers. Phenols can slowly oxidize/discolor on exposure to air/light; protect from prolonged light and air when possible.
Incompatibilities: Strong bases (can form phenolates; exothermic neutralization), strong oxidizers, acid chlorides/anhydrides (acylation), and reactive metals.
PPE: Lab coat, nitrile gloves, safety glasses/goggles; use in a fume hood to avoid inhalation of vapors/aerosols.
First aid (overview):
Skin/eye contact: Rinse with plenty of water for ≥15 minutes; remove contaminated clothing. Seek medical attention.
Inhalation: Move to fresh air; monitor breathing; seek medical attention if symptoms persist.
Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
Spills: Absorb with inert material (vermiculite, sand), collect for disposal. Avoid environmental release.
Always consult the official SDS for authoritative classification, exposure limits, and response procedures.
Solvent Selection
Compound role: This material is typically the substrate/reagent rather than a solvent.
Good solvents: DCM, chloroform, THF, 1,4-dioxane, acetone, ethyl acetate, toluene; MeCN often acceptable.
Limited in alcohols at RT; improves with heat. Poor in water at neutral pH; soluble as phenolate in basic aqueous media.
Polarity considerations:
The phenolic OH enables hydrogen bonding; aprotic polar media (THF, dioxane, MeCN, DMF) are commonly chosen for cross-couplings and O‑functionalizations.
When to choose specific media (examples):
Suzuki–Miyaura coupling (Ar–Br): 1,4-dioxane/water or THF/water; greener alternatives include 2‑MeTHF/water or aqueous micelles.
Buchwald–Hartwig amination/etherification: Toluene, dioxane, or tert-amyl alcohol; modern ligand/catalyst systems work in 2‑MeTHF or CPME.
Williamson ether synthesis (O‑alkylation): Polar aprotics (acetone, MeCN, DMF); stronger bases (K2CO3, Cs2CO3) in MeCN/acetone often effective.
Comparison note:
THF vs 2‑MeTHF: 2‑MeTHF offers higher boiling point and better water tolerance for coupling; THF remains popular but forms peroxides over time (solvent consideration, not the compound).
Storage and Reconstitution
Item-specific:
Storage Conditions: Room temperature.
Shipped In: Not specified for this item; refer to CoA/Spec Sheet.
General guidance for substituted phenols/aryl bromides:
Store tightly capped under ambient conditions, away from strong light and oxidants. A desiccator is beneficial to avoid moisture uptake and to mitigate slow oxidative discoloration.
If long-term storage is planned, consider an inert atmosphere (argon/nitrogen) and amber glass. Keep the container tightly closed to minimize air exposure.
Reconstitution: Not applicable (neat solid/liquid). For solution prep, use dry, oxygen-free solvents if the solution will be stored; phenolic solutions can slowly oxidize—prepare fresh when high sensitivity is required.
Freeze–thaw: Not relevant.
Always refer to the product label and CoA/SDS for handling and storage specifics and observe standard chemical hygiene practices.
Structure and Identity
Brief description: 4-Bromo-2-cyclopropylphenol is an ortho-cyclopropyl, para-bromo substituted phenol — a bifunctional aryl building block combining a reactive aryl bromide with a phenolic OH.
Typical molecular weight: ~213.07 g/mol (calculated from C9H9BrO) (literature)
Representative SMILES: Oc1c(C2CC2)ccc(Br)c1 (literature depiction of 2-cyclopropyl-4-bromophenol)
Structural features (general description):
Aromatic ring bearing two substituents: a phenolic hydroxyl at C1, a cyclopropyl group at the ortho (C2) position, and a bromine at the para (C4) position relative to the OH.
Functional groups: phenol (acidic Ar–OH), aryl bromide (cross-coupling handle), cyclopropyl (compact, strained, hydrophobic substituent that can modulate sterics/electronics).
2D description in words: a phenyl ring with an OH at position 1; moving clockwise, a cyclopropyl group at position 2; a bromine atom at position 4; remaining ring positions unsubstituted.
Notes:
Stereochemistry: none (acyclic substituents; cyclopropyl ring is achiral in this context).
Synthetic Utility
Functional handles and their reactivity:
Aryl bromide (para):
Highly competent in Pd/Ni-catalyzed cross-couplings (Suzuki, Buchwald–Hartwig, Sonogashira, Heck), enabling rapid diversification at C4.
Can be converted to aryl lithium/magnesium under halogen–metal exchange (care required with phenols; protect OH or form phenolate and use non-protic media).
Phenolic OH:
Protection (TBS, TBDPS, Bn, MOM) to allow harsh coupling/metalation.
O‑Alkylation/arylation to ethers; O‑acylation to esters/carbonates.
Activation as sulfonate (OTs/OMs) for subsequent substitution/elimination.
Cyclopropyl (ortho):
Sterically influences electrophilic aromatic substitution and metalation patterns; can be retained as a lipophilic vector or transformed under specialized conditions (ring opening to homoallylic units).
Retrosynthetic value:
Serves as a versatile node: phenol protects or directs, bromide couples to install complexity, then deprotect to unveil phenol for late-stage diversification (e.g., ether libraries, prodrugs).
Select strategic sequences:
Protect OH → Suzuki at C4 → deprotect → O‑functionalization.
Form phenolate → nucleophilic aromatic substitution on suitably activated partners, or intramolecular cyclizations leveraging the phenoxide.
Radical chemistry at the aryl bromide site (photoredox) to access aryl radicals for C–H functionalization or borylation.
Target Specificity
Not applicable. This product is a small-molecule building block and not a biological targeting reagent (no antigen/epitope/isotype information).
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.