QUALITÀ & PUREZZAMoligand™?Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools.
This compound belongs to the class of organic compounds known as phenylpyrrolidines. These are polycyclic aromatic compounds containing a benzene ring linked to a pyrrolidine ring through a CC or CN bond. Pyrrolidine is a five-membered saturated aliphatic heterocycle with one nitrogen atom and four carbon atoms.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
Item-specific facts (from Product Data)
No tested applications or recommended protocols are provided for AC-98170.
General example protocols (not item-specific; adapt after confirming compound properties)
Preparing a DMSO stock
Weigh an appropriate amount of compound in a dry environment.
Add anhydrous DMSO to target 10–50 mM. Vortex and gently warm (≤40 °C) if needed. Record exact concentration by gravimetry or qNMR if critical.
Biochemical assay dosing
Prepare serial half-log dilutions in DMSO (10-point). Transfer to assay buffer to achieve final vehicle ≤1% v/v. Include positive/negative controls and vehicle controls.
Cell-based assay dosing
Pre-dilute DMSO stocks 1:10 in medium before addition to cells to minimize local solvent spikes. Verify absence of precipitation and monitor for cytotoxicity of vehicle.
Analytical verification
At the end of the assay window, analyze representative wells or retained solutions by UPLC–MS to confirm compound integrity and concentration.
Note
These are generic templates and not validated for AC-98170. Always tailor to your target biology and confirm compatibility empirically.
Biological Roles
Item-specific facts (from Product Data)
No biological function or target information is provided for AC-98170.
General guidance (not item-specific)
As a Moligand™ library member, AC-98170 may serve as a probe candidate in discovery studies after activity is demonstrated. Until then, it should be treated as a research chemical of unknown biological activity.
Potential roles explored in screening include modulation of enzyme catalysis, receptor binding, or pathway perturbation. Confirmed roles must come from empirical data using the exact lot and identity.
Assay interference awareness: Some small molecules can act as aggregators, redox cyclers, fluorescence quenchers/enhancers, or metal chelators (PAINS-like behaviors). Conduct counterscreens (detergent sensitivity, redox controls, inner-filter effect assessments) before assigning mechanism.
ADME considerations: If hits are progressed, evaluate permeability (e.g., Caco-2/MDCK), metabolic stability, and protein binding to contextualize observed potency (literature, general). These are not properties of AC-98170 unless measured for this item.
Note
No medical or clinical claims are made. Use strictly for research, under institutional biosafety and chemical safety protocols.
Buffer Applications
Applicability
AC-98170 is a small-molecule library compound and is not itself a buffering agent. Therefore, classical buffer system recipes (e.g., phosphate, HEPES, Tris) do not apply to this item specifically.
Practical assay-related notes (general; not item-specific)
Delivery vehicle: In biochemical or cell-based buffers, deliver compound from DMSO stocks with final vehicle typically ≤0.5–1% v/v. Maintain matched vehicle controls across conditions.
Precipitation control: Use compatible buffers (e.g., HEPES, PBS) and consider low levels of nonionic surfactant (0.01–0.05% Tween-20) or protein (0.1% BSA) to mitigate adsorption/precipitation for hydrophobic compounds.
pH sensitivity: If the molecule contains acid/base sites (unknown here), apparent solubility and activity can be pH-dependent. Evaluate at physiological pH (7.2–7.5) and any target-relevant pH.
Item-specific buffer properties
Not specified for this item; refer to CoA/Spec Sheet if any buffer compatibility notes are provided.
Green Alternatives
Context
Because AC-98170’s structure and solvent needs are not specified, green considerations focus on solvent handling for assay stock solutions and processing rather than synthetic applications.
General greener choices for small-molecule handling (not item-specific)
Prefer water-based assay buffers with minimal organic content (≤1–2% v/v vehicle), using DMSO as the carrier only when necessary.
For preparative dissolution, consider ethanol or isopropanol where solubility permits; these have better environmental and safety profiles than DMF/NMP.
Avoid chlorinated solvents unless analytically required. For LC, adopt water–acetonitrile gradients; consider methanol where chromatographic selectivity allows.
Illustrative comparison (general)
DMSO: Excellent solubilizer, miscible with water; high boiling point complicates removal; low volatility reduces VOC exposure; can affect cell membranes at >0.5–1%.
Ethanol: Renewable, low toxicity; poorer solubility window for many heteroaromatics; evaporative losses can change assay concentrations.
2-MeTHF: Bio-based, good for extractions; immiscible with water and less useful for aqueous assay delivery.
Operational tips
Use minimal volumes of organic vehicles and prepare concentrated stocks to reduce solvent load.
Implement closed-well plating and humidity control to limit evaporation and exposure.
Dispose of solvent waste via segregated, labeled streams to facilitate compliant recycling.
Pharmaceutical Uses
Applicability
No pharmacopeial status, excipient role, or formulation guidance is provided for AC-98170. As a Moligand™ screening compound, it is supplied strictly for research use only and is not indicated for human or veterinary use.
General considerations for research formulation (not item-specific)
If in vivo research is contemplated, ensure institutional approvals and conduct full preformulation (solubility, stability, pH, osmolality) with toxicology oversight. This is outside the scope of the supplied product documentation.
Common exploratory vehicles (for animal studies) include aqueous cosolvent systems (e.g., 10% DMSO + 40% PEG400 + 50% saline) or lipid-based carriers; confirm compatibility for the specific compound. This guidance is general and not a recommendation for AC-98170 without data.
Regulatory note
Not a GMP product; not intended for therapeutic, diagnostic, or clinical use. No medical claims are made.
Physical Properties
Item-specific facts (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Physical state (solid/liquid), color, odor: Not specified for this item; refer to CoA/Spec Sheet.
Melting point, boiling point, density, refractive index: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
LogP/logD, pKa: Not specified for this item; refer to CoA/Spec Sheet.
Literature/computed values
No literature values can be responsibly cited without a defined chemical structure. Please consult PubChem (CID 9696680) or the CoA for structure-specific physicochemical data (where available).
General guidance for small-molecule screening compounds (not item-specific)
DMSO solubility: Many screening molecules are provided to be DMSO-soluble at 10–50 mM (literature, general). Always verify actual solubility for the specific compound.
Hygroscopicity/polymorphism: Some heterocycles and salts may be hygroscopic or show polymorphism affecting apparent melting point (literature, general). Confirm by DSC/TGA if properties are critical to your workflow.
Aqueous compatibility: If aqueous work is required, cosolvent systems (e.g., DMSO 0.5–2% v/v in buffer, or DMSO/PEG400/water mixtures) are commonly used to reach micromolar working concentrations while minimizing precipitation (general practice).
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
What Moligand™ implies (general description of the grade; not item-specific specifications)
Research screening suitability: Moligand™-grade compounds are intended for discovery workflows (HTS, SAR-by-catalog, chemogenomic panels). Typical expectations include identity confirmation by LC–MS and/or NMR and purity consistent with screening use. Exact methods and thresholds are lot-specific—consult the CoA.
Purity reporting: Purity is commonly reported by HPLC/UPLC UV or LC–MS (literature, general). If spectral purity exceeds 90–95% for screening, that is often acceptable; however, medicinal chemistry follow-up may require further purification and orthogonal analytics.
Salt/solvate form: Screening libraries may be supplied as free base/acid or as common salts (e.g., HCl, TFA). The exact form, counterion content, and residual solvent levels are lot-specific and should be checked on the CoA prior to quantitative work.
Stabilizers: Not specified for this item; refer to CoA/Spec Sheet. If present in any lot, stabilizers should be disclosed and considered during biological assays (could affect background signals).
Recommendations
For critical assays, verify identity/purity in-house (qNMR, HRMS, UPLC) and, if needed, repurify to project specifications. Document lot and analytical traceability for reproducibility.
Reaction and Applications
Item-specific facts (from Product Data)
Manufacturer Applications: Not specified for this item.
Relevance to typical applications (general; not item-specific)
Primary use: As a Moligand™ small-molecule library member, AC-98170 is primarily intended for use as a screening compound or reference standard in discovery biology and chemoinformatics, not as a synthetic reagent.
Biochemical/Cell-based assays: Suitable for target-agnostic screening, counter-screening, and mechanism-of-action follow-up once identity and purity are confirmed. Use vehicle controls and concentration–response profiling (e.g., 10-point half-log dilutions) to establish potency windows.
Physicochemical profiling: Employ PAMPA, microsomal stability, solubility, and logD assessments to triage hits. These data guide assay conditions and storage practices.
Orthogonal confirmation: If activity is observed, confirm with orthogonal readouts (e.g., thermal shift vs enzymatic rate, label-free impedance vs reporter assays) to mitigate assay interference.
Not typically applicable
Named organic reactions: Without a structure and functional groups, it is not appropriate to prescribe synthetic reaction roles (e.g., cross-coupling, nucleophilic substitutions) for this specific item. If you intend to use AC-98170 as a building block, obtain structural information and consult reactivity-appropriate conditions.
Reaction Conditions
Applicability
Specific synthetic reaction conditions cannot be provided without knowledge of AC-98170’s structure and functional group profile.
General guidance for handling in discovery workflows (not item-specific)
Stock solutions: Dissolve in anhydrous DMSO at a verified concentration (e.g., 10–50 mM). Vortex, gentle heat (≤40 °C), or brief sonication may assist dissolution. Avoid prolonged heating.
Dilution into assay: Add stock to buffered media to reach the desired final concentration with vehicle ≤0.5–1% v/v. Mix thoroughly to ensure homogeneity; inspect for precipitation.
Stability checks: Monitor by LC at T0 and after typical assay windows (e.g., 4–24 h at room temperature or 37 °C) to detect hydrolysis/oxidation.
Light/air sensitivity: If unknown, handle under low light and minimize headspace oxygen for long incubations; consider inert gas blanket for storage of DMSO stocks.
Note
For any chemical transformations using this compound as a substrate or reagent, obtain structure-specific literature precedents and adjust solvent, temperature, and catalysts accordingly.
Safety and Handling
Item-specific facts (from Product Data)
GHS classification: Not specified for this item; refer to SDS.
Signal word and pictograms: Not specified for this item; refer to SDS.
H-statements: Not specified for this item; refer to SDS.
Storage conditions: Room temperature (as provided).
Research Use: For research use only.
General laboratory safety (not item-specific; always defer to SDS)
PPE: Use appropriate PPE including lab coat, safety glasses, and chemically resistant gloves. Handle powders/solid aerosols in a fume hood to avoid inhalation exposure.
Incompatibilities: Until structure is confirmed, avoid mixing with strong oxidizers, strong acids/bases, and reducing agents. Keep away from ignition sources if volatility or dusting is possible.
First aid overview: In case of skin contact, wash with soap and water. For eye exposure, rinse cautiously with water for several minutes and seek medical advice. If inhaled, move to fresh air. If ingested, rinse mouth and seek medical attention. Follow SDS for specifics.
Spill response: Avoid dust formation. Collect mechanically or with damp disposable towels; dispose of as chemical waste according to institutional procedures.
Waste: Dispose of according to local regulations. If halogens, metals, or other hazards are later identified, segregate appropriately.
Notes
Because identity-specific hazards are not provided, adopt a precautionary approach consistent with handling bioactive screening compounds of unknown toxicity.
Solvent Selection
Item-specific facts (from Product Data)
Solubility data: Not specified for this item; refer to CoA/Spec Sheet.
General solvent strategy for screening compounds (not item-specific)
Stock preparation
DMSO as primary solvent: Prepare a concentrated mother liquor (e.g., 10–50 mM) in anhydrous DMSO after confirming solubility visually and by LC.
Alternative cosolvents: If DMSO solubility is limited, consider DMF or NMP for intermediate stocks; dilute into assay buffer keeping final organic content ≤1–2% v/v to protect assay biology.
Aqueous delivery
Use surfactant-containing buffers (e.g., 0.01–0.05% Tween-20) or add PEG400 (2–10%) for poorly soluble chemotypes.
Pre-wet plasticware with solvent or include 0.1% BSA to reduce adsorption of lipophilic compounds (general practice).
Comparisons (general)
DMSO vs 2-MeTHF/EtOH: DMSO provides the broadest solvation for diverse libraries and is miscible with water; 2-MeTHF and EtOH are greener but may limit solubility for polar/charged species and may perturb some assays.
Buffered saline vs culture media: For biochemical assays, use HEPES or PBS with controlled organic percentages; for cell-based assays, pre-dilute in media and ensure vehicle-matched controls.
Tips
Filter sterilize through 0.22 μm only if the compound is not adsorptive; otherwise, prepare fresh sterile stocks aseptically.
Track freeze–thaw stability in DMSO; some chemotypes degrade via hydrolysis or oxidation upon water uptake.
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
General best practices (not item-specific)
As-supplied solid
Store tightly closed in a dry, inert environment, protected from light. Use desiccant in secondary containment to limit moisture ingress.
Record receipt date and lot; if long-term storage is planned, consider 2–8 °C in desiccation unless the CoA advises otherwise.
DMSO stock solutions
Prepare concentrated stocks (e.g., 10–50 mM) in anhydrous DMSO. Aliquot into low-bind, airtight vials to minimize headspace and freeze–thaw cycles.
Short-term: Store at 2–8 °C for days to weeks if stable. Long-term: Store at −20 to −80 °C. Avoid repeated freeze–thaw; thaw on ice and vortex to homogeneity.
Periodically check integrity by LC–MS or UPLC (e.g., every 3–6 months).
Aqueous working solutions
Prepare fresh prior to use. Discard after the experiment unless stability is confirmed.
Reconstitution notes
Solubility, pH stability, and light/air sensitivity are not specified for this item; verify empirically for your lot and document conditions in your lab records.
Structure and Identity
Item-specific facts (from Product Data)
SKU: A607358
Product Name: AC-98170
CAS: A607358 (catalog-assigned; not a standard CAS Registry Number)
PubChem CID: 9696680
InChIKey: 106460 (as provided; not a canonical InChIKey format)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Grade: Moligand™
General chemistry notes (no structure provided)
Without a defined structure, functional groups, ring systems, and stereochemistry cannot be described for this specific item. Please consult the compound’s CoA/Spec Sheet or PubChem (CID 9696680) for definitive identifiers (IUPAC name, canonical SMILES, InChI, formula).
For small-molecule screening compounds, typical features may span heteroaromatic rings, H-bond donors/acceptors, and drug-like physicochemical space (literature, general). This is not asserted for AC-98170 without its structure.
Practical guidance
If using in screening or profiling, confirm identity via vendor documentation (lot-specific CoA) and, where necessary, independent QC (NMR, LC–MS, HRMS) prior to critical studies.
Record any salt form, solvate, or stereochemical specification on the primary label to avoid ambiguity during hit triage and scale-up.
Synthetic Utility
Applicability
AC-98170 is supplied as a small-molecule screening compound. Without a disclosed structure, it is not appropriate to prescribe specific synthetic transformations or reagent roles for this item.
General notes (not item-specific)
If the structure is obtained (e.g., via PubChem CID 9696680 or CoA), retrosynthetic analysis can identify whether the molecule is best approached through cross-coupling, heterocycle construction, nucleophilic substitution, or condensation chemistry.
For SAR exploration, consider parallel synthesis around the identified chemotype once functional groups are known. Employ robust convergent routes to facilitate analog generation.
Analytical control: Use UPLC and HRMS for rapid reaction triage; confirm isomerism and regiochemistry with 2D NMR when relevant.
Recommendation
Before attempting any derivatization or scale-up, acquire the definitive structure and confirm the compound’s purity and salt state to avoid propagating structural uncertainty into synthetic campaigns.
Target Specificity
Applicability
No target, enzyme, receptor, or pathway specificity information is provided for AC-98170. As a Moligand™ screening compound, it has no declared biological target in this listing.
Guidance (general; not item-specific)
If activity is observed in primary assays, profile against off-target panels or orthogonal assays to evaluate selectivity. Employ concentration–response curves and counterscreens to rule out assay artifacts.
Annotate any emergent specificity with the exact lot number and analytical confirmation to ensure traceable reproducibility.
Domande frequenti
How should this product be stored?
Store at room temperature.
What is Moligand??
Moligand? is one of Aladdin Scientific's premium product lines, formulated for high-purity applications across multiple workflows. Compared to standard grades in the same workflow, Moligand? products typically offer tighter specifications, more rigorous QC, and stronger lot-to-lot consistency.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is A607358. InChIKey GNFXCDMTRHENBV-CJINARDKSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Hai bisogno di aiuto per scegliere la qualità?
La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.