Comprehensive Potato Medium - BioReagent

Cat. No.: C1528517

QUALITÀ & PUREZZA BioReagent

Storage

Room temperature

Shipped In

Normal

Panoramica

For fungal cultivation.

Specifiche

Specifiche e purezza

BioReagent

Condizioni di conservazione di stoccaggio

Room temperature

Spedito in

Normal

Grado

BioReagent

Product Line

Prodotti biologici

Application Protocols

No item-specific, validated protocols are provided in the Product Data. Refer to the product label/CoA for preparation instructions. General, literature-based procedures for potato-derived media are as follows:

• Broth preparation:

  • Weigh the specified grams per liter (per label) into high-purity water; heat with stirring until fully dissolved.
  • Adjust pH as directed on the label.
  • Dispense into suitable vessels; autoclave at 121 °C for 15–20 min.
  • Cool, then inoculate aseptically.

• Agar plates (if using an agar-containing version or adding agar per label):

  • Dissolve medium and agar; sterilize as above.
  • Cool to 45–50 °C; add sterile supplements if required; pour plates in a sterile area; allow to solidify; dry plates briefly if needed.

• Quality controls:

  • Include sterility control (uninoculated) and growth-promotion control with reference strains appropriate for your application.

These steps are general guidance; adjust volumes, pH, additives, and incubation according to your organism and the product’s specific instructions.

Biological Roles

As a complex culture medium, this product does not have intrinsic biological “roles” like a single metabolite; rather, it supplies nutrients that support microbial physiology.

General, literature-based roles in culture:

• Carbon and energy: Readily metabolizable carbohydrates in potato-derived media fuel glycolysis and central carbon metabolism in fungi and yeasts.
• Nitrogen and growth factors: Peptides/amino acids and vitamins (depending on formulation) support biosynthesis of proteins, nucleotides, and cofactors.
• Morphogenesis: Medium composition and pH can influence hyphal development, sporulation, pigmentation, and secondary metabolite profiles in filamentous fungi.
• Oomycete support: Plant-derived components can favor growth of certain oomycetes relative to purely peptone-based media, which is useful for plant pathology studies.

Experimental considerations:

• Phenotypic expression is medium-dependent; when comparing strains/conditions, maintain the same lot and preparation protocol to avoid confounding effects.
• For differential studies (e.g., sporulation efficiency, metabolite production), consider running parallel cultures on potato-based and alternative media to interpret medium-specific effects.

Note: This product is for research use only and is not intended for human or animal diagnostic, therapeutic, or dietary use.

Buffer Applications

This product is a nutrient medium, not a defined buffering system. It is not typically used to prepare buffer solutions or to control pH in biochemical assays.

• If pH control is required in cultures, adjust the medium’s pH per the product label prior to sterilization, or incorporate appropriate buffer systems compatible with the target organism (e.g., citrate, phosphate), added as separate components (general, literature).
• For electrophoresis, chromatography, or enzyme assays, use dedicated buffer systems designed for those applications.

Green Alternatives

This culture medium is inherently plant-derived and water-based, aligning well with green chemistry and sustainable laboratory principles.

• Renewable feedstocks: Potato-based components are agricultural in origin, offering renewable content compared to entirely synthetic media components.
• Benign solvent: Reconstitution in water avoids hazardous organic solvents.
• Energy considerations: Autoclaving is energy-intensive; consider load optimization and cycle consolidation to reduce energy consumption while maintaining sterility assurance.

Alternatives and trade-offs (general, literature):

• DIY infusion vs dehydrated medium: Preparing potato infusion in-house from raw potatoes can reduce packaging but increases labor and batch variability. Dehydrated, standardized media improve reproducibility and reduce biological waste, at the expense of manufacturing footprint.
• Other plant-based media (e.g., malt extract, cornmeal): Also renewable and effective for fungi; each has a different nutrient profile influencing morphology and metabolite expression.
• Selective additives: Choose narrow-spectrum antibiotics or acidification only when required to minimize environmental impact and antimicrobial resistance concerns.

Simple comparison (general):

• Comprehensive Potato Medium: Standardized, convenient, reproducible; water-only preparation; suitable for broad fungal work.
• Home-prepared potato infusion: Lower material processing but higher variability and QC burden; potential for inconsistent performance.

Pharmaceutical Uses

Not a pharmaceutical excipient. This product is intended for research use only.

Relevant laboratory/industrial contexts (general):

• Microbial QC in research environments: Potato-based media are widely used in research labs for cultivation and morphological assessment of fungi and yeasts. In regulated manufacturing or QC environments, use pharmacopeial or validated media and methods as required by applicable standards.
• Seed culture generation for research-scale fermentations of fungi/yeasts (nonclinical, non-GMP). For any regulated use, consult appropriate compendial standards and validation requirements.

No clinical or therapeutic claims are made for this product.

Physical Properties

Item-specific values are not provided in the Product Data.

• Appearance: Not specified for this item; refer to CoA/Spec Sheet.
• Solubility: Intended to be water-soluble/dispersible as a culture medium (general expectation for dehydrated microbiological media; literature). Actual solubility and clarity depend on composition and preparation protocol; consult label/CoA.
• pH (prepared medium): Not specified for this item; refer to CoA/Spec Sheet. Potato-based media are often adjusted around mildly acidic pH to favor fungal growth (literature example: pH ~5.6 at 25 °C), but follow product label.
• Osmolality/ionic strength: Not specified for this item; refer to CoA/Spec Sheet.
• Density/bulk density (powder): Not specified for this item; refer to CoA/Spec Sheet.
• Melting/boiling point, refractive index, logP: Not applicable for a complex dehydrated medium.

Preparation-dependent properties (general, literature):

• Clarity: Broth is typically clear to slightly opalescent after proper dissolution and sterilization; agar plates set to a firm gel if agar is included. Clarity may vary with potato-derived particulates.
• Heat stability: Most dehydrated culture media are autoclavable at 121 °C for 15–20 min; heat-labile supplements (if any) should be filter-sterilized and added after cooling. Follow this product’s label for exact conditions.

Quality and Grades

• Grade: BioReagent

  • Meaning: BioReagent grade indicates suitability for biological research workflows, including routine microbiology and cell-related laboratory procedures where consistent performance and low bioburden/contaminants are important. It is not a clinical/diagnostic or GMP-grade material.
  • Implication for this item: Each lot is formulated and blended to meet internal specifications appropriate for culture medium use. Lot-to-lot performance should be validated with control organisms or workflows in your lab.

• Purity: Not specified for this item; refer to CoA/Spec Sheet. For complex media, performance metrics (growth promotion, pH, clarity, sterility before use) are typically more relevant than “chemical purity.”

• Stabilizers/antimicrobials: Not specified for this item; refer to CoA/Spec Sheet. Dehydrated media generally contain no antimicrobial agents unless explicitly stated.

• Performance expectations (general, literature):

  • Growth promotion: Potato-based media commonly support robust growth and sporulation of many fungi/yeasts and certain oomycetes. Your acceptance criteria may include colony morphology, radial growth rate, and sporulation counts for reference strains.
  • Clarity/pH: Prepared medium should meet label pH at 25 °C and display expected clarity/gel strength (if agar is included). Always verify against CoA.

• Documentation: For detailed specifications (pH, fill weights, preparation factors, growth-promotion test organisms), consult the product CoA and internal specification sheet.

Reaction and Applications

Chemical reaction applications are not relevant to this product. Instead, the focus is on microbiological and mycological applications.

Use cases (general, literature):

• Cultivation and maintenance of filamentous fungi and yeasts, including promotion of conidiation/sporulation for downstream assays (microscopy, genetics, and inoculum preparation).
• Isolation and enumeration of fungi from plant tissues, soil, and environmental samples, often with selective additives (e.g., antibiotics) to suppress bacteria.
• Growth and observation of plant-pathogenic oomycetes (e.g., Phytophthora, Pythium) where potato-derived nutrients can be advantageous.
• Morphology studies: Encourages characteristic colony textures, pigmentation, and radial growth patterns used in identification.
• Fermentation prep: Generation of pre-cultures or inocula for small-scale biomass or metabolite screening in research settings.

Practical tips (general):

• Asepsis: Prepare and pour plates or distribute broth under sterile conditions to avoid contamination.
• pH: Adjust per label before sterilization; potato-based media are commonly mildly acidic (literature example ~pH 5.6), which helps suppress many bacteria while favoring fungi.
• Additives: Antibiotics, acid solutions, or indicators may be added after sterilization and cooling to 45–50 °C (for agar media) or to room temperature (for broth), depending on stability.
• Quality control: Include positive-control strains and sterility controls with each new lot/preparation to confirm growth-promotion performance.

Reaction Conditions

Classical chemical reaction conditions are not applicable. For culture preparation, consider the following general, literature-based guidance; always follow the product label/CoA:

• Solvent: High-purity water.
• Typical preparation: Dissolve the indicated grams of dehydrated medium per liter of water with heating and stirring as needed. Adjust pH per label. Sterilize by autoclaving at 121 °C for 15–20 min. For agar media, cool to 45–50 °C before pouring plates.
• Additives: Heat-labile supplements (e.g., antibiotics, acidifying solutions) should be sterile-filtered and added after cooling to appropriate temperatures to preserve activity.
• Incubation (organism-dependent): Fungi/yeasts commonly 20–30 °C; plant pathogens per organism requirements. Time to visible growth ranges from 24 h to several days depending on strain and inoculum (literature). These are general ranges; consult organism-specific protocols.

Note: The above are general literature practices for potato-based media; adhere to the specific instructions provided with this product.

Safety and Handling

Follow standard microbiological reagent handling practices. Defer to the product SDS for authoritative safety information.

• GHS classification, signal word, pictograms, and H-statements: Not specified for this item; refer to SDS.
• Primary hazards (general): Dehydrated media are typically low hazard but can cause respiratory/skin/eye irritation as dust. Once hydrated and inoculated, cultures become biohazardous according to the organism handled; follow BSL procedures.
• PPE: Lab coat, safety glasses, and suitable gloves. Use a dust mask/respirator if dust generation cannot be controlled (consult SDS and institutional policy).
• Engineering controls: Prepare in a clean area; use a biosafety cabinet when handling live organisms or when asepsis is required. Employ dust control when weighing.
• Incompatibilities: Avoid moisture ingress prior to use; store away from strong oxidizers and contaminants. Do not mix with acids/bases or solvents except as directed (water for reconstitution).
• First aid (general):
  • Inhalation: Move to fresh air; seek medical advice if symptoms persist.
  • Skin/eyes: Rinse with water for several minutes; remove contaminated clothing; seek medical advice if irritation continues.
  • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
• Spill/cleanup: Avoid dust; sweep/vacuum with HEPA or damp methods; dispose according to local regulations.
• Waste: Autoclave any used/contaminated medium before disposal per biosafety policy.

Solvent Selection

This product is intended to be reconstituted in water; organic solvent selection is not applicable.

• Primary solvent: High-purity water (e.g., distilled, deionized, or Type II/Type I lab water). Endotoxin-free or sterile water may be chosen depending on downstream use.
• Miscibility: Fully water-based; do not dissolve in organic solvents.
• Sterilization: Autoclaving is the standard approach for dehydrated media. Where heat-labile supplements are used, filter-sterilize the supplement separately and add aseptically to cooled (45–50 °C) sterile medium.
• When to choose this medium vs alternatives (general, literature):
  • Choose potato-derived media to promote sporulation and pigmentation of many filamentous fungi and yeasts, and to recover plant-pathogenic oomycetes. Compared to rich bacteriological media (e.g., LB, TSB), potato media are typically more favorable for fungi and less selective for bacteria.
  • For selective isolation, pair with antibiotics/acidification as appropriate (added post-sterilization), or use specialized selective media (e.g., acidified PDA for fungi). Follow institutional biosafety rules.

Small comparison (general):

• Potato-based medium: Complex, plant-derived carbon/nutrient profile; good for fungi/oomycetes.
• Malt extract medium: Strongly supports yeasts and molds; different carbohydrate spectrum.
• Sabouraud dextrose medium: Acidic, peptone-based; broadly used for fungi; different nitrogen source and buffering.

Storage and Reconstitution

• Storage conditions (as supplied): Room temperature (per Product Data). Keep tightly closed in a cool, dry place. Protect from moisture, heat, and microbial contamination.
• Shipping: Normal (per Product Data).
• Shelf life: Not specified for this item; refer to CoA/Spec Sheet. Use opened containers promptly and reseal with desiccation as needed.

Reconstitution and preparation (general guidance; follow label/CoA for exact details):

• Solvent: High-purity water (distilled, deionized). Use sterile water if preparing without subsequent autoclaving.
• Concentration: Not specified for this item; refer to label for grams per liter. Do not deviate from label concentration without validation.
• Dissolution: Add powder to water with stirring; gentle heating may aid dissolution. Avoid scorching on hot plates.
• pH: Adjust to the label value before sterilization. Potato-based media are commonly mildly acidic (literature), but follow product-specific instructions.
• Sterilization: Autoclave at 121 °C for 15–20 min unless the label specifies otherwise. For heat-labile supplements, sterile-filter and add after cooling to 45–50 °C (agar) or room temperature (broth).
• Storage after preparation: Store sterile broth or plates at 2–8 °C, protected from light and dehydration. Use within a typical window of 2–4 weeks for plates and 1–2 weeks for broths unless otherwise validated (general practice). Always check for contamination or precipitation before use.

Research use only.

Structure and Identity

This product is a complex, multi-component culture medium formulated for potato-based microbial growth applications. It is not a single defined chemical entity.

• SKU: C1528517
• Product name: Comprehensive Potato Medium
• Category: Life Science reagent; culture medium (complex, plant-derived)
• Molecular formula: Not applicable for mixtures; Not specified for this item; refer to CoA/Spec Sheet.
• Molecular weight: Not applicable for mixtures; Not specified for this item; refer to CoA/Spec Sheet.
• CAS/EC identifiers: Not applicable for mixtures; Not specified for this item; refer to CoA/Spec Sheet.
• SMILES/InChI/InChIKey: Not applicable for mixtures comprised of multiple constituents.

Structural features (general, literature):

• Complex, undefined composition typically centered on potato-derived nutrients and a fermentable carbohydrate source. Such media provide amino acids/peptides, vitamins, minerals, and carbohydrates that support fungi, yeasts, and plant-pathogenic oomycetes (literature, e.g., potato-based media).
• If supplied as “medium” without agar, it is intended for broth; if supplemented with agar (literature: 15–20 g/L), it forms a solid gel for plate culture. Verify the specific format on the product label/CoA.

2D structural description: Not applicable to a mixture; no single discrete molecular structure can represent the product.

Synthetic Utility

Not applicable. This is a biological culture medium rather than a chemical building block or reagent for organic synthesis.

• If your workflow involves chemical synthesis of metabolites produced by organisms grown on this medium, the medium serves only as a biological growth platform, not as a reagent in the synthetic step.

Target Specificity

Not applicable. This is not an antibody or affinity reagent. No antigen/epitope specificity, clone, or isotype data are relevant to a culture medium.

• Tested organisms or growth-promotion data: Not specified for this item; refer to CoA/Spec Sheet.

Domande frequenti

How should this product be stored?

Store at room temperature.