Copper Selenide - PrimorTrace™,≥99.99% metals basis,powder , CAS No.20405-64-5

CAS: 20405-64-5 Cat. No.: C1509654 Formula: Cu2Se Peso molecolare: 206.05 Numero EC: 243-796-7
Disponibile su ordine
QUALITÀ & PUREZZA PrimorTrace™ ? PrimorTrace™ — Aladdin's trace-metal-analysis line with ultra-low metal background. Use for ICP/AAS trace-metal work where contamination must be minimal. ≥99.99% metals basis powder
Storage
Room temperature,Desiccated
Shipped In
Normal
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
1g
C1509654-1g
Su ordinazione · 8–12 settimane
69,33€
5g
C1509654-5g
Su ordinazione · 8–12 settimane
286,27€
Enter a quantity for the sizes you want to add.

Panoramica

Application:

Copper(I) selenide (Cu2Se) is a semiconductor material, which exists in cubic, tetragonal or orthorhombic forms. It forms thin films, which can be used as solar cell materials, optical filters, thermoelectric converters, electro-optical devices, and microwave shield coatings.


Specifiche

Specifiche e purezza
PrimorTrace™,≥99.99% metals basis,powder
Condizioni di conservazione di stoccaggio
Room temperature,Desiccated
Spedito in
Normal
Grado
PrimorTrace™
Purezza
≥99.99% metals basis
Nomi e identificatori
SMILES
[Cu].[Cu].[Se]
InChIKey
KTLOQXXVQYUCJU-UHFFFAOYSA-N
InChI
1S/2Cu.Se
Isomeri SMILES
[Cu].[Cu].[Se]
Peso molecolare
206.05
Reaxys
16539844
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=16539844&ln=

Dati avanzati

Taxonomic Classification

Taxonomy Tree

KingdomInorganic compounds
SuperclassMixed metal/non-metal compounds
ClasseMiscellaneous mixed metal/non-metals
SubclassNot available
Intermediate Tree Nodes Not available
Direct ParentMiscellaneous mixed metal/non-metals
Alternative Parents Not available
Molecular FrameworkNot available
Substituents Miscellaneous mixed metal/non-metal
DescrizioneThis compound belongs to the class of inorganic compounds known as miscellaneous mixed metal/non-metals. These are inorganic compounds containing non-metal as well as metal atoms but not belonging to afore mentioned classes.
External Descriptors Not available
Struttura 3D
Modello di struttura chimica interattiva





Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Proprietà chimiche e fisiche
SolubilitàSoluble in hydrochloric acid. Insoluble in water.
Punto di fusione (°C)1113 °C
Peso molecolare206.06
XLogP3
Hydrogen Bond Donor Count0
Hydrogen Bond Acceptor Count0
Rotatable Bond Count0
Exact Mass205.776 Da
Monoisotopic Mass205.776 Da
Topological Polar Surface Area0.000 Ų
Heavy Atom Count3
Formal Charge0
Complexity2.800
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count3
Sicurezza e pericoli (GHS)
Pictogrammi
GHS06,   GHS08,   GHS09
Segnale
Danger
Indicazioni di pericolo

H373:May causes damage to organs through prolonged or repeated exposure

H410:Very toxic to aquatic life with long lasting effects

H301+H331:Toxic if swallowed or if inhaled

Precauzioni

P260:Do not breathe dust/fume/gas/mist/vapors/spray.

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P264:Wash hands [and …] thoroughly after handling.

P270:Do not eat, drink or smoke when using this product.

P271:Use only outdoors or in a well-ventilated area.

P273:Avoid release to the environment.

P321:Specific treatment (see ... on this label).

P330:Rinse mouth.

P391:Collect spillage.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P405:Store locked up.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P501:Dispose of contents/container to an approved waste disposal plant.

P301+P316:IF SWALLOWED: Get emergency medical help immediately.

P316:Get emergency medical help immediately.

P319:Get medical help if you feel unwell.

Reaxys
16539844
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=16539844&ln=
Citations of This Product
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

Not applicable (no antibody/biochemical assay validation).

Practical handling examples for materials use (general guidance)

  • Film deposition by spin coating: Disperse ligand-exchanged copper selenide nanocrystals in DMF (10–50 mg/mL). Filter (0.2 µm PTFE). Spin at 1500–3000 rpm for 30–60 s. Dry under N2. Anneal at 200–300 °C in N2/Se vapor to densify.
  • Electrode modification: Drop-cast an IPA/DMF dispersion (1–5 mg/mL) onto cleaned glassy carbon or FTO. Dry at 60–80 °C. Optionally, activate by brief anodic/cathodic cycling in alkaline electrolyte to form catalytically active surface.
  • Colloid stabilization: For aqueous inks, add 0.1–1 wt% PVP or 1–10 mM SDS; probe sonicate in ice bath for 5–10 min; adjust pH to maximize zeta potential magnitude.

Note

  • The above are literature-style examples intended for experienced users; they are not validated protocols for this specific SKU. Optimize locally for your system and consult the CoA for any item-specific constraints.
Biological Roles

Applicability

  • Copper selenide is an inorganic solid-state material and does not serve a known physiological role as such. This section provides context from biochemistry regarding its constituent elements; it is not a clinical claim.

Literature context

  • Selenium: An essential trace element in the form of selenocysteine within selenoproteins (e.g., glutathione peroxidases, thioredoxin reductases). However, insoluble selenium-containing minerals like copper selenide are not recognized biological nutrients and can be toxic if bioavailable as soluble Se species.
  • Copper: An essential micronutrient involved in redox enzymes (e.g., cytochrome c oxidase). Again, bulk copper selenide does not function as a bioavailable copper source under normal conditions.

Research intersections

  • Nanomaterials research has explored Cu–Se nanoparticles for imaging, photothermal, or catalytic applications in vitro; such studies often rely on surface functionalization to modulate dispersion and bio-interactions. Any such work must be conducted strictly as laboratory research and with appropriate toxicological assessment.

Summary

  • No inherent biological signaling or metabolic role is associated with copper selenide as a bulk material. Handle as a potentially hazardous, poorly soluble inorganic solid to prevent environmental and biological exposure.

Research use notice

  • For research use only. Not for human or veterinary use.
Buffer Applications

Not typically applicable.

  • Copper selenide is an insoluble inorganic solid and is not used to prepare biochemical buffer systems. If dispersions are required for materials studies, use appropriate solvents or aqueous surfactant systems (see Solvent Selection) rather than classical biological buffers.
  • Note that standard buffers (PBS, Tris) can promote ionic strength-driven aggregation of nanoparticulate dispersions and may contain components (e.g., phosphates) that adsorb to particle surfaces, modifying surface charge and conductivity.
Green Alternatives

Context

  • Copper selenide provides unique electronic/thermoelectric properties but involves selenium, a chalcogen with potential toxicity and environmental persistence. Greener choices may be appropriate depending on the application.

Alternative materials (literature comparisons; benefits/tradeoffs)

  • Cuprous oxide (Cu2O)
    • Pros: Selenium-free; abundant, low-toxicity; visible-light absorber; established aqueous electrodeposition.
    • Cons: Lower carrier mobility and stability in some environments; different band alignment vs Cu selenides.
  • Zinc oxide (ZnO) or Tin oxide (SnO2)
    • Pros: Non-chalcogenide, lower EHS burden; excellent n-type transport; scalable sol–gel synthesis in alcohols/water.
    • Cons: n-type by default; may not substitute for p-type Cu selenide roles without additional dopants.
  • Copper sulfide (CuxS)
    • Pros: Sulfur less problematic than selenium; similar p-type plasmonic behavior; broad, low-cost syntheses.
    • Cons: Often more prone to phase changes/oxidation; different bandgap and thermal stability.
  • CZTS (Cu2ZnSnS4)
    • Pros: Earth-abundant, Se-free absorber for PV; compatible with solution processing.
    • Cons: Complex phase space; requires tight stoichiometry control; typically lower device efficiencies than Se analogs.

Process greening for copper selenide itself

  • Use low-toxicity solvents (e.g., fatty amines/green ethers) and avoid TOP/TOPSe where possible.
  • Replace hydrazine/NaHSe with benign selenium sources (e.g., selenourea or Na2SeSO3 from Se and sulfite) in aqueous chemical bath deposition.
  • Implement closed-loop solvent recovery and HEPA filtration for powder handling to minimize releases.

Note

  • Material substitution must consider device-level performance; pilot comparative studies are recommended.
Pharmaceutical Uses

Not typically applicable.

  • Copper selenide is not an approved pharmaceutical excipient and is not used in drug formulations. In materials R&D, it may be explored as a component in diagnostic devices (e.g., electrodes or sensing films), but such use is strictly nonclinical and requires appropriate materials validation.
  • No pharmacopeial monograph is associated with bulk copper selenide. Any use must be limited to research and development under laboratory conditions.
Physical Properties

Item-specific specifications

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

Literature/general properties for copper selenides (for context only)

  • Physical state and color (literature): typically dark gray to black crystalline or microcrystalline solid.
  • Density (literature):
    • CuSe (klockmannite): ~6.6–6.8 g/cm³
    • Cu2Se (berzelianite): ~6.7–6.9 g/cm³
  • Melting/transition behavior (literature): incongruent melting reported; Cu2−xSe exhibits a superionic phase transition near ~400 °C; bulk melting points vary by stoichiometry and may involve decomposition/selenium loss rather than a sharp melt.
  • Electrical/optical (literature): p-type semiconductor; reported band gaps vary with composition and morphology, typically ~1.0–2.0 eV (e.g., Cu2Se ~1.1–1.4 eV; CuSe ~1.6–2.0 eV). Strong sub-bandgap absorption owing to defect states.
  • Solubility (literature): insoluble in water and common organic solvents; can be dispersed as colloids with surfactants/ligands; dissolves/etches in oxidizing acid mixtures (e.g., nitric acid) with selenium oxidation.
  • Thermal stability (literature): air-stable at ambient conditions; prolonged heating in air can lead to surface oxidation to copper oxides/selenium oxides.
  • Magnetic behavior (literature): diamagnetic/weakly paramagnetic depending on defect concentration.

Note

  • Do not treat literature values as specifications for this catalog item. For measured values of this lot, refer to the CoA.
Quality and Grades

Item-specific facts

  • Grade: PrimorTrace™ (proprietary grade designation by Aladdin Scientific/partner). No item-specific impurity limits or assay values are provided here. For definitive specifications, see the CoA/Spec Sheet for this SKU/lot.

What PrimorTrace™ generally implies (general guidance; not a specification)

  • The PrimorTrace™ designation is intended for materials science and analytical workflows where trace-level impurities can influence electrical/optical properties. Typical expectations for such a grade include:
    • Tight control of trace metallic contaminants that could dope or quench carrier transport.
    • Low volatile/adsorbed moisture and minimized surface oxides through desiccated handling/packaging.
    • Batch documentation suitable for reproducible device fabrication or comparative studies.

Why this matters for copper selenide

  • Carrier concentration and mobility in copper selenides are highly defect- and impurity-sensitive. Trace Fe, Ni, Ag, Cl, or alkali residues can shift Fermi level and band structure, impacting thermoelectric power factor, plasmonic response, or catalytic activity.
  • For thin films or colloids, surface adsorbates (acetates, chlorides, amines) may alter ligand exchange and film densification; PrimorTrace™ control helps reduce such variability.

Verification and documentation

  • Item-specific: Assay, phase fraction (e.g., XRD), particle size, and impurity profiles are Not specified for this item; refer to CoA/Spec Sheet.
  • Recommended incoming QC (user): PXRD for phase identification, ICP-MS for trace metals, XPS for surface composition, and TGA for adsorbates.
Reaction and Applications

Focus: materials science applications of copper selenide (literature-based; expand/use with this item as a source material)

Key application areas

  • Thermoelectrics: Cu2−xSe exhibits superionic Cu+ mobility and promising ZT at mid-to-high temperatures; defect engineering (x) tunes carrier concentration and phonon scattering.
  • Photovoltaics/photodetectors: Copper selenide serves as an absorber or as a selenization precursor for CIGS/CZTS devices; also acts as a hole-transport/counter-electrode layer in DSSCs.
  • Plasmonics/IR: Degenerate p-type carrier densities in Cu2−xSe nanocrystals yield tunable near-IR localized surface plasmon resonances; responsive to redox/ligand environment.
  • Electrocatalysis: Reported activity for HER/OER and CO2RR after surface activation/etching; active phases may involve Cu–Se–O reconstruction.
  • Chemical sensing: Chemiresistive and electrochemical sensors leveraging conductivity changes upon gas or analyte adsorption.

Synthesis/processing roles

  • Precursor in selenization: Reacts under Se vapor/H2Se to form multi-cation selenides; copper selenide layers provide Cu and Se concurrently to seed chalcopyrite/kesterite growth.
  • Colloidal nanocrystal libraries: Cation exchange (e.g., Cu2−xSe → Ag2Se, CdSe) allows topology-preserving transformations.

Practical tips

  • Control Cu:Se ratio via precursor stoichiometry and post-annealing under Se or Cu flux; confirm by XRD/Raman/XPS.
  • Avoid halogen/oxidizer contamination when aiming for high conductivity; rigorously dry solvents/ligands.
  • For device films, perform ligand exchange (e.g., with Na2S, NH4SCN, short thiols) followed by mild anneal (150–300 °C) to enhance interparticle coupling while minimizing Se loss.
Reaction Conditions

General literature conditions for preparing/processing copper selenide (guidance only; adjust per substrate and scale)

  1. Chemical bath deposition (CBD)
  • Reagents: Cu2+ salt (e.g., CuSO4), selenium source (e.g., Na2SeSO3 prepared from Se + Na2SO3), complexant (e.g., EDTA, citrate), pH 8–10.
  • Conditions: 60–90 °C, 10–60 min for thin films on glass/ITO; growth rate tuned by complexant and [Se].
  • Notes: Rinse promptly; mild anneal (200–300 °C) in N2/Se vapor improves crystallinity.
  1. Colloidal hot-injection/heat-up
  • Solvents/ligands: Oleylamine, oleic acid, TOP/TOPSe alternatives (e.g., selenourea in OAm).
  • Conditions: 160–300 °C under N2/Ar for 10–60 min; size/phase controlled by temperature and Cu:Se ratio.
  • Post-processing: Ligand exchange with shorter ligands (thiols, NH4SCN, halides) to enhance film conductivity.
  1. Solvothermal/hydrothermal
  • Solvents: Ethylenediamine, ethylene glycol, water/amine mixtures; selenium from Se powder reduced by NaBH4 or hydrazine alternatives (e.g., ascorbate with selenourea).
  • Conditions: 120–220 °C, 6–24 h in sealed autoclaves; yields nanoplates, nanorods, or microcrystals depending on additives.
  1. Selenization/annealing
  • Process: Anneal Cu-containing films (Cu, Cu2O, CuO) in Se vapor or H2Se at 300–550 °C to form Cu–Se, or further react with In/Ga/Zn/Sn for multinary phases.
  • Atmosphere: Se overpressure or graphite box to mitigate Se loss; ramp/soak profiles tailored to substrate.

Performance notes

  • Verify phase (XRD), composition (EDS/ICP), and optoelectronic properties (Hall, UV–Vis–NIR) after processing; small stoichiometry shifts can substantially alter properties.

Caution

  • Replace hazardous selenium precursors (H2Se, hydrazine) with safer alternatives when possible; ensure appropriate gas handling if used.
Safety and Handling

Item-specific safety fields (from Product Data)

  • GHS classification, pictograms, signal word, H-statements: Not specified for this item; refer to SDS.
  • Storage: Room temperature, desiccated. Shipped under normal conditions.

General safety guidance for copper selenides (literature/consensus; consult SDS for authoritative instructions)

  • Hazards: Insoluble copper/selenium compounds can pose risks if inhaled or ingested. Selenium compounds may be harmful and ecotoxic; copper salts are hazardous to aquatic life. Treat powders as hazardous dusts.
  • PPE: Use appropriate gloves (e.g., nitrile), lab coat, and eye protection. Handle powders in a fume hood or glovebox to minimize inhalation and environmental release.
  • Incompatibilities: Avoid strong oxidizers (may generate SeO2/selenates and Cu(II) salts), strong acids or oxidizing acid mixtures which can dissolve/oxidize the solid releasing selenium oxides; avoid halogenating agents at elevated temperature.
  • Dust control: Minimize dust formation; use antistatic measures and HEPA local capture when transferring powders.
  • First aid (overview):
    • Inhalation: Move to fresh air; seek medical attention if symptoms persist.
    • Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; obtain medical advice as needed.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
  • Spill/cleanup: Avoid dry sweeping. Dampen and collect mechanically; place in suitable container for hazardous waste disposal.
  • Waste: Dispose of as heavy-metal/selenide-containing waste in accordance with institutional and local regulations.

Always defer to the product’s SDS for definitive hazard classification and response measures.

Solvent Selection

Applicability

  • Copper selenide is a solid inorganic semiconductor; it is not used as a solvent. This section focuses on dispersing/processing media for powders/films/nanocrystals.

Dispersion/processing media (literature guidance)

  • Aqueous systems: Insoluble in water, but can be dispersed with surfactants (e.g., SDS, CTAB) or polymers (PVP) using probe sonication; zeta potential tuning via pH/surfactant aids stability.
  • Polar aprotic: DMF, DMSO, NMP can disperse ligand-capped nanocrystals; useful for spin-coating and doctor blading. Dry, anhydrous grades minimize oxidation/aggregation.
  • Nonpolar/high-boiling: Toluene, octane, and especially coordinating solvents like oleylamine or trioctylphosphine (TOP) are common for colloidal synthesis and storage of nanocrystals.
  • Alcohols: Ethanol/isopropanol serve as antisolvents for ligand exchange or as inks with co-solvents to tune drying dynamics.

Selection principles

  • Match surface chemistry: Native ligands (amines, phosphines, oleates) dictate dispersibility; perform ligand exchange (e.g., with thiols, short amines, halide salts) to render films conductive.
  • Device processing: For uniform films, use low-water, low-residue solvents with controlled evaporation rates; consider NMP/DMF for blade coating; IPA/EtOH for spray coating.
  • Avoid oxidizing media: Peroxides or strong oxidants can etch Se and alter Cu:Se stoichiometry.

Quick comparison (literature)

  • Oleylamine: excellent colloidal stability; slow evaporation; requires post-degassing/ligand removal.
  • DMF/NMP: good wetting of substrates; compatible with ligand-exchanged inks; higher boiling, slower drying.
  • IPA/EtOH: fast drying; may require additives to prevent coffee-ring effects.
Storage and Reconstitution

Item-specific instructions (from Product Data)

  • Storage conditions: Room temperature, desiccated.
  • Shipping: Normal conditions.

General guidance for this material type

  • Container: Store in tightly sealed, clean glass or compatible polymer bottle with a secondary desiccant pack. Minimize headspace oxygen/moisture for highly defect-sensitive applications.
  • Light/atmosphere: Protect from prolonged humidity exposure; dark storage is advisable to avoid inadvertent photoeffects on surface ligands (if present). Inert-gas backfilling is beneficial for long-term stability of nanocrystal forms.

Reconstitution/dispersion (if needed)

  • Dry handling: Break up agglomerates gently (agate mortar) inside a fume hood or glovebox to reduce dust and moisture uptake.
  • Dispersions: Prepare slurries in appropriate media (e.g., DMF, NMP, IPA, oleylamine) using bath or probe sonication. For aqueous dispersions, add surfactant/polymer (e.g., SDS, PVP) before sonication. Filter through 0.2–0.45 µm PTFE/NY filters to remove large particulates.
  • Film formation: After casting/coating, anneal under inert gas or Se-containing atmosphere to improve crystallinity and stoichiometry.

Stability and shelf life

  • Item-specific shelf life and assay/phase stability are Not specified for this item; refer to CoA/Spec Sheet. Inspect periodically by PXRD or optical methods if used for sensitive device fabrication.

Safety note

  • Avoid creating airborne dust; clean tools and surfaces to prevent cross-contamination of materials and analytical equipment.
Structure and Identity

Item-specific facts (from Product Data)

  • SKU: C1509654
  • Product name: Copper Selenide
  • CAS: 20405-64-5
  • CID: 6914519
  • InChIKey: 189202 (as provided)
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Grade/Purity: PrimorTrace™ (see Quality & Grades)

Literature/general identity (for context; not item-specific specifications)

  • Common stoichiometries: CuSe (klockmannite phase) and Cu2−xSe (berzelianite/superionic phases).
  • Representative empirical formulas and formula weights (literature):
    • CuSe: Cu1Se1; Mr ≈ 142.52 g/mol (Cu 63.546, Se 78.971)
    • Cu2Se: Cu2Se1; Mr ≈ 206.03 g/mol
  • Structural features: binary copper chalcogenide; typically contains Cu(I) centers with chalcogenide Se2− anions; possible copper vacancy defects in Cu2−xSe leading to p-type conductivity and superionic behavior.
  • 2D structural description (words): a close-packed array of Se atoms with copper occupying tetrahedral and/or trigonal sites, forming a layered or defect anti-fluorite network depending on composition; no discrete molecular SMILES is generally used for bulk inorganic solids.

Notes

  • Exact phase/stoichiometry of this catalog item is not specified; consult the CoA for definitive structural/phase information.
Synthetic Utility

Perspective

  • Copper selenide is primarily a functional material rather than a conventional reagent. Nevertheless, it can play synthetic roles in materials chemistry and as a platform for post-synthetic transformations (literature context).

Utility highlights

  • Precursor/seed layer: Thin films or powders of copper selenide can act as reactive precursors for forming complex selenides (e.g., Cu(In,Ga)Se2, Cu2ZnSnSe4) via cation exchange or annealing under Se vapor; the pre-existing Cu–Se lattice lowers kinetic barriers for chalcopyrite/kesterite formation.
  • Cation exchange scaffold: Cu2−xSe nanocrystals undergo rapid topotactic cation exchange (e.g., with Ag+, Cd2+, Pb2+) to yield isostructural chalcogenides while preserving morphology (rods, plates, spheres), enabling shape-controlled syntheses that are difficult by direct routes.
  • Heterogeneous catalyst/support: After activation (oxidative etch to form Se vacancies/Cu sites), copper selenide has been reported to catalyze electrochemical hydrogen/oxygen evolution and CO2 reduction; also explored in organic electrosynthesis and as a conductive support.
  • Doping platform: Incorporation of aliovalent dopants (e.g., Zn, Sn, Ag) into Cu–Se matrices tunes carrier density and optical properties; post-synthetic diffusion/annealing strategies are common.

Practical notes

  • Characterize phase and stoichiometry rigorously (PXRD/Raman/XPS) before and after transformations.
  • Control atmosphere during high-temperature steps to avoid selenium loss; employ Se overpressure or encapsulation.
Target Specificity

Not applicable.

  • This product is an inorganic material (copper selenide), not a biological affinity reagent. There is no antigen/epitope specificity, clone, or isotype associated with this item.

Hai bisogno di aiuto per scegliere la qualità?

La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.

Visualizza la guida alle qualità PrimorTrace™ →

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.