Determine the necessary mass, volume, or concentration for preparing a solution.
Ethidium Bromide (molecular formula: C₂₁H₂₀BrN₃, molecular weight: 394.31) is a highly sensitive fluorescent dye used for visualizing DNA in agarose and polyacrylamide gels. It emits an orange-red fluorescence signal when excited by a 302 nm UV transilluminator. EB is toxic; all EB-containing solutions must be decontaminated before disposal to prevent environmental pollution. EB Solution (10 mg/mL) is prepared with sterile double-distilled water and is widely applied in electrophoresis of DNA and RNA samples.
Required Materials:
1. Electrophoresis running buffer (e.g., TAE, TBE)
2. Microwave oven
3. UV analyzer or gel documentation imaging system
Operating Protocol:
1. Melt 50 mL agarose gel solution (commonly 0.8-2% concentration) in a microwave oven.
2. Add 50–100 μL Ethidium Bromide stock solution (10 mg/mL) and mix gently to avoid air bubbles.
3. Pour the gel when cooled to 50–60°C (touchable without scalding). After complete solidification, remove the comb, submerge the gel in electrophoresis buffer, and load samples for electrophoresis.
4. Observe, photograph and document the results under a UV analyzer or gel imaging system.
Precautions:
1. Gel thickness should not exceed 0.5 cm; excessive thickness will reduce detection sensitivity.
2. Avoid prolonged UV exposure when recovering DNA fragments via gel electrophoresis.
3. EB is toxic and irritates the skin and eyes. Handle with extreme caution.
4. For personal safety, wear a lab coat, disposable gloves and a face mask during operation.
5. This product is for scientific research use by qualified professionals only. It must not be used for clinical diagnosis or treatment, food or pharmaceutical production, nor stored in residential premises.
Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Data | Oggetto |
|---|---|---|---|
| Certificate of Analysis | Oct 28, 2026 | E1526364 |
| Sensibilità | Light-sensitive |
|---|---|
| Punto di fusione (°C) | 260-262°C |
H341:Suspected of causing genetic defects
H302:Harmful if swallowed
H330:Fatal if inhaled
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P284:[In case of inadequate ventilation] Wear respiratory protection.
P281:Use personal protective equipment as required.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P330:Rinse mouth.
P320:Specific treatment is urgent (see ... on this label).
P203:Obtain, read and follow all safety instructions before use.
P301+P317:IF SWALLOWED: Get medical help.
P318:if exposed or concerned, get medical advice.
P316:Get emergency medical help immediately.
La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.
Visualizza la guida alle qualità BioReagent → Visualizza la guida alle qualità Suitable for electrophoresis →