Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
Example non-clinical workflows for using Hispidulin 7-glucuronide as an analytical standard (general guidance; optimize per lab SOPs):
Stock preparation:
Dissolve in DMSO to 10–50 mM; vortex and sonicate briefly if needed. Filter (0.22 µm PTFE) for LC–MS work. Store aliquots at −20 °C (amber vials).
Calibration curves (LC–MS/MS):
Prepare serial dilutions in 50:50 water:MeOH (0.1% formic acid) or matrix-matched blank extracts. Typical ranges: 1–5000 ng/mL depending on sensitivity.
Include internal standard (stable isotope-labeled analog or a structurally related glucuronide) when available.
Sample stability checks:
Assess bench-top (2–6 h), autosampler (4–24 h at 4–10 °C), freeze–thaw (3 cycles), and long-term (−20 °C) stability.
Enzymatic hydrolysis control (if applicable):
Split samples; treat one aliquot with β-glucuronidase under mild conditions; compare recovery of aglycone versus intact conjugate to verify method performance.
Spectrophotometric work:
Record UV spectra in MeOH to verify flavone band positions; use as identity confirmation alongside MS.
For all applications: For research use only. Adapt concentrations, matrices, and detection parameters to your instrumentation and regulatory environment.
Biological Roles
Functional context (biochemistry): Hispidulin 7-glucuronide is a phase II conjugate formed by UDP-glucuronosyltransferases (UGTs), increasing aqueous solubility and facilitating transport and excretion of the aglycone hispidulin. The glucuronide retains the flavone chromophore while adding a carboxylate-bearing sugar that modulates polarity and protein binding.
Formation pathways (general): Phenolic O-glucuronidation predominantly at the 7-OH of hispidulin; UGT isoforms involved can be probed using recombinant enzymes and selective inhibitors.
Transport/Disposition (general): Compared with aglycones, glucuronides exhibit altered interaction with membrane transporters (e.g., OATPs, MRPs) and serum proteins; they are more prevalent in plasma/urine than parent in many metabolism settings.
Enzymatic lability: Susceptible to hydrolysis by β-glucuronidases present in some tissues, microbes, and during certain sample preparation steps.
Spectroscopic/analytical advantages: Strong UV absorbance (flavone bands) and predictable negative-mode ESI response as [M−H]− facilitate detection and quantification in complex matrices.
Note: This information is provided for biochemical/analytical context only. No medical or clinical claims are made; use is restricted to research applications.
Buffer Applications
This compound is not a buffering agent. It does not serve as a pH buffer component in routine biochemical assays.
Practical note: When used as an analyte or enzyme substrate/standard, dissolve in DMSO or alcohol and dilute into appropriate assay buffers (e.g., phosphate, HEPES, Tris) at mild pH (≈7.0–8.0) to balance solubility and stability.
Avoid strongly acidic (<pH 2) or basic (>pH 9) buffers for extended periods to minimize glycosidic cleavage.
Include antioxidants (e.g., small amounts of ascorbate) only if validated for the assay, as additives can affect enzyme kinetics and LC–MS response.
Green Alternatives
This product is a solid analyte/standard rather than a process solvent or reagent used in bulk transformations. “Green alternatives” primarily concern solvent choices for handling, analysis, and purification.
Preferred greener media for dissolution/analysis (general guidance):
Water or buffered aqueous systems at mild pH for workups and dilutions.
Ethanol or methanol as greener organic cosolvents relative to chlorinated or highly toxic aprotics.
Minimize use of:
DMF and NMP (reproductive toxicity concerns) unless strictly necessary.
Large volumes of acetonitrile; consider MeOH–water where chromatographically acceptable.
Small comparison (general):
Water/EtOH vs ACN/DMSO: Water/EtOH improves EHS profile but may limit solubility; ACN/DMSO offer higher solubility/compatibility at the expense of greener metrics.
Operational greening tips:
Use low-volume, high-sensitivity LC–MS methods to reduce solvent consumption.
Reuse ACN/MeOH mobile phases via solvent-recycling systems when feasible.
Prefer solid-phase extraction (SPE) with aqueous eluents for sample cleanup over liquid–liquid extraction with halogenated solvents.
Pharmaceutical Uses
No direct excipient or approved pharmacopeial role is indicated for this item. It is typically used in research and development contexts.
Typical R&D uses (non-clinical):
Reference standard for bioanalytical assays supporting ADME studies of flavonoids.
Calibration and QC materials in LC–MS/MS quantitation of conjugated metabolites.
In vitro metabolism/transporter studies to characterize phase II conjugation and disposition.
Formulation context (analytical):
Prepared as DMSO or aqueous ethanolic stock solutions for spiking into plasma, urine, or tissue homogenates.
Employed to assess recovery, matrix effects, and stability during method validation per regulatory guidance (e.g., ICH/EMA/FDA analytical guidelines), strictly in a research setting.
Note: For research use only. No medical, diagnostic, or therapeutic use is intended.
Physical Properties
Item-specific specifications were not provided in the product data. Where values are given below, they are general literature/computed expectations for flavone glucuronides and should not be construed as specifications.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: ~476.4 g/mol (literature/computed for C22H20O12)
Melting point: Typically high with possible decomposition for flavonoid glucuronides (literature); exact MP not specified for this item; refer to CoA/Spec Sheet.
Solubility (general guidance, literature):
Water: low to moderate at neutral pH; improved in basic aqueous media due to carboxylate formation.
Polar organics: soluble in DMSO; typically sparingly to moderately soluble in methanol/ethanol; limited in acetonitrile; poor in nonpolar solvents.
pKa (literature expectations): carboxyl of glucuronic acid ~3–4; phenolic OH groups typically >8–9 (context-dependent). Exact values not specified for this item.
LogP/LogD (literature expectations): more hydrophilic than the aglycone; LogD7.4 often negative to low positive for flavone glucuronides. Exact value not specified for this item.
UV/Vis: Flavone π→π* bands often around 270–280 nm (band II) and 330–350 nm (band I) in methanol; exact maxima for this conjugate not specified for this item.
Refractive index, density, vapor pressure: Not applicable/not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
What grade implies (general guidance): For small-molecule library items, typical quality attributes include correct identity (NMR/HRMS), high purity by HPLC/UPLC (often ≥95% area), and well-controlled residual solvents/inorganics. Exact thresholds for this catalog number are not specified.
Stabilizers/additives: None indicated in the product data. If present, they would be declared on the CoA.
Analytical verification (typical for this class, literature):
Identity: 1H/13C NMR (diagnostic anomeric proton for β-D-glucuronide ~4.5–5.5 ppm; methoxy singlet near 3.7–3.9 ppm), HRMS [M−H]− expected near m/z 475.0.
Purity: Reverse-phase HPLC with UV detection at ~330–350 nm and 270–280 nm; LC–MS for confirmation.
Item-specific cautions:
Phenolic glucuronides can isomerize/hydrolyze under strong basic or acidic conditions; evaluate purity after any pH stress or prolonged warming.
Protect from prolonged light exposure to minimize photodegradation of the flavone chromophore.
For definitive acceptance criteria (assay %, water, metals, UV cutoff, etc.): Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
As a phase II metabolite of a flavone, Hispidulin 7-glucuronide is primarily employed as a reference standard and probe substrate rather than as a general synthetic reagent.
Typical laboratory uses (research):
Bioanalytical standard for LC–MS/MS quantification of hispidulin conjugation in microsomal, hepatocyte, or in vivo samples.
Positive control in UDP-glucuronosyltransferase (UGT) activity assays and enzyme kinetics (Km/Vmax determination), especially for O-glucuronidation at phenolic sites.
Substrate for β-glucuronidase hydrolysis studies to evaluate deconjugation efficiency and sample preparation workflows.
Stability studies across pH, temperature, and light to inform handling of flavonoid glucuronides in biological matrices.
Mechanistic context (general):
Forms via UGT-catalyzed transfer of glucuronic acid from UDPGA to the 7-phenolic oxygen of hispidulin (SN1-like glycosyl transfer through an oxocarbenium-like transition state in the enzyme active site).
Practical tips:
Avoid prolonged exposure to pH >9 or pH <2 to limit glycosidic cleavage or acyl migration.
For spike/recovery experiments, prepare fresh working solutions and keep samples on ice; include β-glucuronidase inhibitors if preventing deconjugation is critical.
Use amber vials and minimize air/light to preserve the flavone chromophore.
Related applications:
Method development for polarity-driven separations (HILIC vs C18).
Comparison with sulfate conjugates to study transporter selectivity and phase II conjugation pathways.
Reaction Conditions
While not generally employed as a reagent, the following conditions are relevant for working with Hispidulin 7-glucuronide in research assays (general literature guidance; not product specifications):
Buffer: Sodium acetate or phosphate, pH 5.0–6.8; 37 °C.
Enzyme: β-Glucuronidase from Helix pomatia, E. coli, or bovine liver; enzyme units optimized empirically.
Time: 0.5–4 h depending on matrix and enzyme load.
UGT-catalyzed formation (in vitro biosynthesis):
Reagents: UDP-glucuronic acid (UDPGA), Mg2+.
Enzymes: Recombinant UGT isoforms or pooled liver microsomes.
Buffer: Tris or phosphate, pH 7.4; 37 °C; inclusion of alamethicin for microsomal permeabilization.
Quench: Ice-cold ACN or MeOH; centrifuge; analyze by LC–MS.
LC–MS detection (typical settings):
Ionization: ESI negative; monitor [M−H]− around m/z 475 (literature expectation).
Chromatography: C18 column; water/MeOH or water/ACN with 0.1% formic acid or ammonium acetate.
All parameters above are general literature practices and should be optimized per laboratory protocols and instrument configuration.
Safety and Handling
GHS classification, signal word, pictograms, H-statements: Not specified for this item; consult the Aladdin SDS for authoritative safety information.
General hazards (class-based context): Organic polyphenolic glucuronides are typically low volatility solids; dust may cause irritation to eyes, skin, or respiratory tract. Avoid generating dust and inhalation of particulates.
Personal protective equipment (PPE):
Lab coat, safety glasses or chemical splash goggles, and appropriate chemically resistant gloves (e.g., nitrile).
Use in a fume hood when weighing, dissolving, or handling powders to minimize inhalation exposure.
Handling guidance:
Avoid contact with strong oxidizers and strong bases/acids that may hydrolyze the glycosidic bond.
Prepare solutions with dry, oxygen-free solvents only if required for sensitive analytical work; otherwise standard analytical handling is suitable.
First-aid overview (general):
Inhalation: Move to fresh air; seek medical advice if symptoms persist.
Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical attention if irritation develops.
Ingestion: Rinse mouth; seek medical advice.
Spill/cleanup: Avoid dust formation; collect mechanically; wipe residuals with ethanol/water; dispose of in accordance with institutional and local regulations.
Fire safety: Combustible organic solid; use CO2, dry chemical, or foam. Thermal decomposition may produce CO/CO2 and phenolic/acidic vapors.
Defer to SDS and institutional SOPs for complete hazard and exposure control information.
Solvent Selection
Hispidulin 7-glucuronide is a polar, polyfunctional small molecule (phenols, carboxylic acid, glycosidic ether). Solvent choice should account for hydrogen bonding and potential ionization of the glucuronic acid.
Polarity/miscibility (general):
Best dissolution in polar protic solvents (water, methanol, ethanol) or highly polar aprotics (DMSO, DMF).
Poor solubility in nonpolar solvents (hexanes, toluene) and limited in moderately polar aprotics (EtOAc, MTBE).
Practical recommendations:
For analytical stocks: Prepare 10–50 mM solutions in anhydrous DMSO, then dilute into aqueous buffers (0.1–1% DMSO final) as needed.
For purely aqueous systems: Adjust pH to 7.4–8.0 to increase solubility via partial deprotonation of the glucuronic acid; avoid strong base to protect the glycosidic bond.
For HPLC: Reverse-phase methods typically use water (0.1% formic acid) and acetonitrile/methanol. Methanol often improves peak shape for flavonoid conjugates.
Comparison notes (general):
DMSO vs methanol: DMSO provides highest solubility and stability; methanol allows direct UV detection and is LC-friendly.
Water (neutral) vs buffered basic water: Basic buffers enhance solubility but may promote slow hydrolysis; use mild pH and cold storage.
Acetonitrile: Often requires a co-solvent (water or MeOH) for dissolution; less effective as a sole solvent for this class.
Storage and Reconstitution
Storage conditions (item-specific): Store at −20 °C (per product data). Protect from light and moisture. Keep container tightly closed.
Shipping (item-specific): Shipped in an ice chest with ice pads (per product data) to maintain a low temperature during transit.
Stability guidance (general):
Solid: Stable for months at −20 °C when protected from light and humidity. Allow vial to equilibrate to room temperature in a desiccated environment before opening to prevent condensation.
Solutions: Prepare single-use aliquots. For DMSO or aqueous alcoholic stocks, store at −20 °C; avoid repeated freeze–thaw cycles. Inspect for precipitation or degradation before use.
Reconstitution recommendations:
Preferred solvents: DMSO for concentrated stocks; methanol or ethanol for LC-compatible stocks; dilute into aqueous buffers immediately before use.
Working solutions: Prepare fresh on the day of use; maintain on ice for biological assays.
pH considerations: If dissolving directly in water, adjust pH to ~7.4–8.0 to enhance solubility; avoid extremes of pH that can promote hydrolysis of the glycosidic bond.
Labeling/records: Document preparation date, solvent, concentration, and storage conditions on each aliquot.
Note: For research use only. Refer to the CoA/Spec Sheet for any item-specific stability or solution shelf-life data not provided here.
Structure and Identity
Hispidulin 7-glucuronide is a flavone glucuronide, the 7-O-β-D-glucuronide of hispidulin (4′,5,7-trihydroxy-6-methoxyflavone).
Structural features (general chemistry description):
Core scaffold: flavone (2-phenyl-4H-1-benzopyran-4-one) with a 6-methoxy substitution and phenolic OH groups at 5 and 4′.
Conjugation: β-D-glucuronic acid attached via an O-glycosidic bond at the 7-hydroxyl of the flavone.
Functional groups: conjugated ketone (flavone carbonyl), phenolic hydroxyls, aryl methoxy, glycosidic ether linkage, and a free carboxylic acid on the glucuronic unit.
2D description: A fused chromenone ring bearing 6-OMe and 5-OH; at C-7 the phenolic oxygen links to a pyranose (glucuronic) ring terminated by a carboxylate/acid; the B-ring carries a para-phenolic OH (4′-OH). No stereocenters in the aglycone; the glucuronide ring adopts the D-configuration typical of β-D-glucuronic acid.
Synthetic Utility
Hispidulin 7-glucuronide is not commonly used as a synthetic building block due to its polyfunctionality and liability of the β-O-glycosidic linkage; it is primarily an analytical standard.
Limited transformations (general/literature):
Enzymatic or acid/base-catalyzed deglucuronidation to regenerate the aglycone (hispidulin) for comparative analyses.
Derivatization at phenolic positions (e.g., methylation/acetylation) possible but risks competing reactions at the sugar and hydrolysis.
Retrosynthetic perspective: The molecule decomposes into hispidulin and D-glucuronic acid methyl ester (or activated donor) in typical synthetic plans; chemical synthesis often proceeds via protected glucuronyl donors (e.g., trichloroacetimidates) under glycosylation conditions with participating 2-O-acyl groups to enforce β-selectivity.
Practical takeaway: Use this compound chiefly as a reference analyte or enzyme substrate; for synthetic campaigns, start from protected sugar donors and hispidulin to construct the conjugate rather than modifying the isolated glucuronide.
Target Specificity
Not applicable. This product is a small-molecule flavone glucuronide, not an antibody, probe with defined biological target binding, or an oligonucleotide. No antigen/epitope, clone, isotype, or species reactivity information applies.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.