Applications may include: bioconjugation, drug delivery, PEG hydrogel, crosslinker, and surface functionalization
Specifiche
Informazioni legali
Product of JenKem Technology
Condizioni di conservazione di stoccaggio
Store at -20°C
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Dati avanzati
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Sicurezza e pericoli (GHS)
Segnale
Warning
Indicazioni di pericolo
H315:Causes skin irritation
H319:Causes serious eye irritation
Precauzioni
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No vendor-validated biological assay protocols are provided for this item. Typical research workflows (general guidance):
Surface coupling via carboxyl end (EDC/NHS): Clean and amine-functionalize surface → activate PEG carboxyl in MES buffer (pH ~5.5) → couple at pH 7.5–8.5 → rinse and block unreacted sites.
Polymer conjugation (amide formation): Dissolve PEG acid and amine-bearing polymer in DMF/DMSO → add EDC/HOBt or DIC/HOAt → stir RT → precipitate polymer into ether/MTBE; wash and dry.
Hydroxyl-end activation to carbonate: React with CDI in anhydrous solvent → purify (precipitation/chromatography) → couple to amines (urethane formation) in dry conditions.
Parameters (stoichiometries, times, temperatures) should be optimized empirically. For any bio-related workflow, avoid amine-containing buffers during activation and verify compatibility of co-solvents with the target substrate.
Biological Roles
Item-specific biological/biochemical activity: Not applicable; this is a synthetic PEG linker for research/materials use, not a biological molecule.
General context (literature):
Poly(ethylene glycol) chains are widely used to impart “stealth” and hydration layers to surfaces, reducing protein adsorption and cell adhesion through steric repulsion and water structuring.
Carboxyl-terminated PEGs enable covalent attachment to amine-bearing biomolecules or surfaces under mild conditions, forming amide bonds while preserving biomolecule integrity (when used in compatible buffers/conditions).
The PEG8 length offers an intermediate spacer distance: long enough to project functional groups away from a surface for accessibility, yet short enough to limit excessive flexibility that can reduce ligand presentation density.
In aqueous environments, PEG adopts dynamic, solvated conformations; end-group ionization (carboxylate at neutral/basic pH) can modulate local charge and interactions.
Note: Any discussion of physiological effects or therapeutic use would be out of scope; this product is for research use only.
Buffer Applications
This material is not a buffering reagent. However, its carboxyl terminus is commonly activated and coupled in buffered media. Practical guidance (general/literature):
Preferred buffers for EDC/NHS coupling: MES (pH 4.7–6.0) or acetate buffer (pH 4.5–5.5). Maintain pH near 5.0–5.5 to favor O-acylisourea formation and NHS-ester stability while limiting hydrolysis.
Avoid buffers containing primary amines (e.g., Tris, glycine) during activation, as they compete with the intended amine target.
For subsequent amidation, adjust to pH 7.5–8.5 (e.g., phosphate, HEPES, or bicarbonate) after forming an NHS ester; this promotes nucleophilic attack by the amine.
Solubility aids: Up to 10–20% DMF or DMSO can be included to dissolve hydrophobic partners; verify compatibility with biomolecules/surfaces.
Ionic strength: Moderate salt (e.g., 100–150 mM NaCl) can reduce nonspecific electrostatic interactions during conjugation workflows.
Recipes and concentrations are application-dependent; confirm optimal conditions empirically for your substrate and maintain stoichiometry based on the acid value of the PEG reagent.
Green Alternatives
Sustainability considerations for PEG-based linkers (general):
Solvent choices strongly impact greenness; the core PEG linker is relatively benign but synthesis/coupling often relies on hazardous solvents and coupling agents.
Greener choices (literature/practice):
Solvents:
Replace DMF/NMP with ethanol, water, or 2-MeTHF/EtOAc where feasible. Aqueous EDC/NHS couplings in MES buffer (pH ~5.0–6.0) can be effective for amide formation.
Use CPME or 2-MeTHF instead of THF/DCM for non-aqueous esterifications when solubility allows.
Coupling reagents:
Prefer water-soluble carbodiimide (EDC) over DCC to avoid DCU waste; use catalytic NHS to form stable intermediates in water-rich media.
Explore enzyme-catalyzed esterifications (lipases) in green solvents for certain transformations.
Workup/purification:
Precipitation and membrane-based purification (dialysis/ultrafiltration) can reduce chromatographic solvent waste.
Energy:
Conduct reactions at ambient temperature when possible; PEG chemistry often proceeds without heating.
Trade-offs:
Greener solvents may reduce solubility of reactants, requiring co-solvents or longer reaction times.
EDC in water can hydrolyze; balancing buffer pH and reagent stoichiometry is essential to maintain efficiency while minimizing waste.
Comparison snapshot (general):
DMF/NMP (excellent solubility, toxic/reprotoxic) vs Water/MES (benign, sometimes slower, limited solubility for hydrophobes).
DCC/DCM (efficient, generates DCU/halogenated waste) vs EDC/water (greener, sensitive to pH/hydrolysis).
Pharmaceutical Uses
No therapeutic/clinical claims are made for this product. It is for research use only.
Formulation/manufacturing context (general):
PEGylated linkers are used in R&D for device coatings, diagnostic surface passivation, and prototype drug-delivery materials to improve hydrophilicity and reduce nonspecific adsorption.
Carboxyl-terminated PEGs serve as intermediates to prepare activated esters (e.g., NHS esters) or amides/urethanes that can be further formulated into hydrogels, nanoparticles, or surface treatments in development stages.
Regulatory status/pharmacopeia: Not specified for this item; PEG as a class appears in pharmacopeias, but heterobifunctional PEG oligomers are typically specialty research reagents. Consult project-specific regulatory guidance.
Extractables/leachables: For any device/prototype work, assess residual solvents, low-MW PEG fractions, and coupling reagent byproducts; perform project-specific risk assessments.
Any use in manufacture of finished pharmaceuticals requires appropriate qualification; this listing provides no such certification.
Physical Properties
Item-specific values (this product):
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight (average Mn): Not specified for this item; refer to CoA/Spec Sheet.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
General/literature characteristics for PEG8-based HO/CO2H oligomers:
Physical state: typically low-melting waxy solid or viscous syrup depending on Mn and end groups.
Solubility (literature):
Highly soluble in water and polar protic solvents (MeOH, EtOH).
Readily soluble in polar aprotic solvents (DMSO, DMF, NMP, acetonitrile).
Limited solubility in nonpolar solvents (hexanes, toluene); solubility can improve with slight heating or co-solvents.
Partitioning: PEG segments are hydrophilic; carboxylic acid end can be deprotonated (pH > pKa) to enhance aqueous solubility.
Acid pKa (aliphatic carboxyl, literature): typically ~4–5 for propionic acid termini; local microenvironment within PEG may shift apparent pKa slightly.
Hygroscopicity: PEG oligomers may absorb atmospheric moisture.
Viscosity: increases with concentration and decreases with temperature; relevant for solution handling.
Optical/refractive data, density, melting/boiling points, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet. Do not treat any general values as specifications for this SKU.
Quality and Grades
Item-specific grade/purity for this SKU: Not specified for this item; refer to CoA/Spec Sheet.
Interpretation and considerations for PEG linkers (general):
Average molecular weight and polydispersity (Ð = Mw/Mn) strongly influence performance in materials functionalization and conjugation. Vendors often specify an average repeat count (e.g., PEG8) with a narrow distribution; check CoA for Mn and Ð.
End-group fidelity: Verify acid value (meq/g), hydroxyl number, and residual starting end-groups. High end-group conversion ensures predictable coupling.
Residuals: For coupling-grade materials, limits on residual solvents (e.g., DMF, DCM), catalysts (e.g., stannous octoate), and inorganic salts are relevant. Confirm by GC/LC/ICP as applicable on CoA.
Water content/peroxides/UV cutoff/metal limits: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers: Not specified for this item; if present, they may affect downstream reactions (e.g., hindered phenols can quench radicals). Review CoA.
Selecting grade for application (guidance):
Surface grafting and polymer synthesis: prioritize narrow Ð and high end-group integrity.
Bioconjugation R&D: prefer coupling-grade with low bioburden/endotoxin (if offered) and documented acid number.
Analytical confirmation: 1H/13C NMR (end-group signals), MALDI/ESI-MS for Mn, FTIR for –OH/–COOH, titration for acid value.
Reaction and Applications
This heterobifunctional PEG (HO- … –CO2H) is a versatile hydrophilic spacer/linker in materials and surface chemistry. Typical research applications (general, based on functionality):
Amide coupling via the carboxyl terminus:
EDC/NHS or DIC/HOAt/HOBt-mediated activation for conjugation to primary amines on surfaces, polymers, or ligands.
Formation of stable amide linkages that improve water compatibility and reduce nonspecific adsorption.
Esterification of the carboxyl end to graft onto hydroxylated substrates (e.g., polyols, inorganic hydroxylated surfaces after appropriate priming) using DCC/DMAP or Steglich conditions.
Hydroxyl-end derivatization:
Activation to p-nitrophenyl or succinimidyl carbonate for subsequent coupling to amines (urethane formation).
Conversion to tosylate/mesylate, enabling substitution (e.g., azidation → click chemistry after further alkyne introduction).
Surface passivation and spacing:
Fabrication of PEGylated monolayers/brushes to minimize protein fouling (materials science focus).
Spacer in nanoparticle and hydrogel functionalization, where PEG8 length (~3–4 nm contour, literature) balances flexibility and spacing.
Polymer-analogous modifications:
Chain extension, star-polymer synthesis, or block copolymer formation by selective end-group reactions.
Practical tips:
Keep reactions dry when using carbodiimides/acid chlorides; PEG absorbs moisture.
Control equivalents based on acid value or 1H NMR to account for polydispersity.
Purify by precipitation into cold ethers or by dialysis (MWCO chosen relative to Mn) when appropriate.
Reaction Conditions
General literature guidance for common transformations with HO–PEG8–(propionic acid):
EDC/NHS amide coupling (aqueous):
Solvent: MES buffer (50–100 mM), pH 5.0–5.5; optional 5–20% DMF for solubility.
Notes: Filter DCU precipitate; avoid over-activation that may lead to PEG chain scission.
Hydroxyl activation to p-nitrophenyl carbonate:
Solvent: dry DCM/MeCN.
Reagents: p-nitrophenyl chloroformate (1.2–1.5 eq), base (pyridine/Et3N, 1.5–2 eq).
Temperature/time: 0°C to RT, 1–3 h.
Notes: Protect from moisture; confirm activation by UV (pNP release in test reaction).
Tosylation of terminal –OH:
Solvent: dry DCM or pyridine.
Reagents: TsCl (1.2 eq), base (pyridine or Et3N, 2 eq), catalytic DMAP.
Temperature/time: 0–5°C addition, then RT 2–6 h.
Notes: Subsequent displacement with NaN3 in DMF (60–80°C) affords azide-PEG for click workflows.
Yields depend on substrate and purification; values are project-specific and not specified for this item.
Safety and Handling
Item-specific GHS/SDS data:
Signal word, H-statements, GHS classification, pictograms: Not specified for this item; refer to the product SDS.
General safety guidance for PEG-based carboxylic acids (literature/practice):
Hazards: Typically low volatility; may cause skin/eye irritation. Carboxylic acids can be irritants, especially in concentrated solutions. PEGs are generally considered low acute toxicity in lab handling, but avoid ingestion/inhalation.
PPE: Use lab coat, safety glasses or face shield, and appropriate chemical-resistant gloves (e.g., nitrile). For weighing viscous/waxy materials, use spatula; avoid aerosolization.
Handling: Work in a well-ventilated area. Avoid contact with strong oxidizers and strong bases/acids that may induce degradation or undesired salt formation.
Incompatibilities: Strong oxidizing agents; dehydration reagents may induce side reactions. Carbodiimide couplings can form urea byproducts—handle with care.
First aid (overview; defer to SDS):
Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing; seek medical attention if irritation persists.
Inhalation: Move to fresh air; seek medical attention if symptoms occur.
Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
Spill/leak: Absorb with inert material (spill pads, vermiculite). Clean surfaces with water/ethanol. Prevent release to drains without assessment.
Thermal decomposition: Heating above typical lab temperatures can cause degradation of PEG backbones to aldehydes/ether fragments; avoid overheating.
Always consult the official SDS for authoritative hazard information.
Solvent Selection
Polarity and miscibility (general/literature for PEG8 carboxylic acids):
Highly polar and hydrophilic due to PEG backbone; carboxyl terminus adds ionizable functionality.
Limited solubility in: nonpolar hydrocarbons (hexane, heptane) and weakly polar aromatics (toluene); use co-solvents or slight heating.
Choosing solvents by task:
Amide coupling (carboxyl terminus): DMF, DMSO, or NMP; for aqueous carbodiimide chemistry, MES or phosphate buffers (avoid primary amines in buffer) with co-solvent (≤20% DMF) if needed.
Esterification (carboxyl terminus): dry DCM/THF or DMF with DCC/EDC and catalytic DMAP; for greener options, 2-MeTHF or EtOAc may substitute.
End-group activation (hydroxyl terminus): anhydrous DCM/THF/MeCN for tosylation/mesylation or CDI/succinyl carbonate formation.
Purification: Precipitation from MTBE/diethyl ether into cold ether-rich media often removes small-molecule reagents; reverse-phase or size-exclusion chromatography is used when needed.
Comparison (general):
Water vs DMF: Water is preferred for EDC/NHS activation with water-soluble amines; DMF/DMSO boost solubility for hydrophobic counterparts.
THF/2-MeTHF: useful for non-aqueous esterifications; PEG oligomers may be only moderately soluble—test concentration and temperature.
Storage and Reconstitution
Storage (item-specific):
Store at −20°C. Shipping: Ice chest + ice pads (per product data).
General handling best practices for PEG linkers:
Protect from moisture; store tightly sealed under inert gas or in a desiccator. PEG oligomers can be hygroscopic.
Avoid repeated freeze–thaw of bulk material. If frequent use is anticipated, aliquot into dry, airtight containers upon first opening.
Light sensitivity: Typically low, but store in amber or opaque containers to minimize any potential photo-induced degradation of activated derivatives.
Reconstitution and solution stability (general):
Dissolve in dry solvents (e.g., anhydrous DMSO, DMF, MeOH) or in water/buffer as required by the application. Gentle warming (30–40°C) can aid dissolution of waxy solids.
For coupling reactions, prepare fresh solutions to minimize hydrolysis of activated intermediates (e.g., NHS esters, carbonates).
Aqueous stock solutions may be stored short-term (hours to a few days) at 2–8°C; for longer storage, freeze at −20°C and protect from moisture. Verify stability empirically.
Always refer to the CoA/SDS for any item-specific stability limits, impurity controls, or recommended storage atmospheres.
Structure and Identity
Item-specific identifiers (SMILES, InChIKey, CAS, formula, exact MW): Not specified for this item; refer to CoA/Spec Sheet.
Overview (general/literature description based on name):
The name “HO-PEG8-Propionic acid” denotes a heterobifunctional poly(ethylene glycol) oligomer with approximately eight ethylene glycol repeat units.
One terminus is a free hydroxyl (–OH) group; the opposite terminus bears a propionic acid (–(CH2)2–CO2H or –(CH2)3–CO2H spacer terminating in –CO2H). Vendors commonly use a 3-carbon spacer (propionic) linked via an ether to PEG; exact spacer definition for this item is not specified.
Structural features (general):
Linear PEG chain: –(O–CH2–CH2)8–, conferring hydrophilicity and water solubility.
One aliphatic carboxylic acid end for amide/ester coupling chemistry.
One primary alcohol end for further derivatization (e.g., tosylation/mesylation, carbonate/ester formation, or activation to succinimidyl carbonate).
2D description in words: A flexible polyether backbone composed of eight repeating ethylene glycol units, capped on one end by a primary hydroxyl and on the other by a short alkyl chain terminating in a carboxylic acid group.
Stereochemistry and rings: None (achiral, acyclic polyether; local conformational flexibility typical of PEG).
Note: Exact end-group definitions, spacer length, and average molecular weight distribution (Ð) are item-specific quality attributes; consult the CoA for definitive identity data.
Synthetic Utility
Functional group leverage (general):
Carboxylic acid terminus:
Amide formation with primary/secondary amines via EDC/NHS (aqueous) or DCC/HOAt/HOBt (organic) conditions.
Conversion to acid chlorides (e.g., oxalyl chloride) for subsequent ester/amide synthesis when water intolerance is required.
Formation of activated esters (NHS, PFP) enabling one-pot or staged bioconjugation.
Hydroxyl terminus:
Carbonate formation (CDI; p-NPC) to generate amine-reactive PEGylating agents.
Esterification/etherification to anchor PEG onto substrates or extend chains.
Retrosynthetic value:
Serves as a hydrophilic spacer between hydrophobic domains, decoupling recognition elements from surfaces and increasing effective molarity in intramolecular designs.
PEG8 length balances solubility with manageable viscosity and defined spacing, aiding reproducibility in materials assembly.
Analytical control:
Monitor couplings by 1H NMR (disappearance of carboxylic OH/broad –OH signals, appearance of amide/urethane resonances), FTIR (C=O shifts), and MALDI/ESI-MS (Mn shift consistent with derivatization). Titrate residual acid (acid value) to assess conversion.
Target Specificity
Not applicable. This product is a small-molecule/oligomeric PEG linker, not an antibody, enzyme, or affinity reagent. No antigen/epitope specificity, clone, isotype, or species reactivity is associated with this item.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.