Ipatasertib dihydrochloride - 10mM in DMSO , CAS No.1396257-94-5

CAS: 1396257-94-5 Cat. No.: I656237 Formula: C24H34Cl3N5O2 Peso molecolare: 530.92 PubChem CID: 62707512
Disponibile su ordine
GRADE & PURITY 10mM in DMSO
Storage
Desiccated,Store at -80°C
Shipped In
Dry ice packs + Cold packs
★
Size
Germania (EU)
USA*
Price
Qty
1ml
I656237-1ml
Su ordinazione · 8–12 settimane
223,79€
Enter a quantity for the sizes you want to add.
🧪

Why this grade

10mM in DMSO for sensitive chromatographic and analytical workflows requiring minimal baseline interference.

🌡

Storage & shipping

Desiccated,Store at -80°C Ships Dry ice packs + Cold packs Check lot-specific COA for exact specifications.

📋

Quality documents

SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.

📚

Literature proof

Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.

Panoramica

Ipatasertib dihydrochloride (GDC-0068 dihydrochloride) is a highly selective and ATP-competitive pan-Akt inhibitor with IC 50 s of 5, 18 and 8 nM for Akt1 , Akt2 and Akt3 , respectively.

In Vitro

Ipatasertib shows more than 600 and more than 100-fold selectivity for Akt1 in IC 50 against the closely related kinases PKA and p70S6K, respectively. When tested at 1 μM in a panel of 230 protein kinases, which includes 36 human AGC family members, Ipatasertib inhibits only 3 other kinases by more than 70% at 1 μM concentration (PRKG1α, PRKG1β, and p70S6K). IC 50 s measured for these 3 kinases are 98, 69, and 860 nM, respectively. Thus, with the exception of PKG1 (relative to which Ipatasertib is >10-fold more selective for Akt1), Ipatasertib displays a more than 100-fold selectivity for Akt1 over the next most potently inhibited non-Akt kinase, p70S6K, in the screening kinase panel. The relationship between pharmacokinetics (PK) and pharmacodynamics (PD) of Ipatasertib is investigated in 3 xenograft models that showed dose-dependent response to drug treatment: MCF7-neo/HER2, TOV-21G.x1, and LNCaP. The mean cell viability IC 50 of Ipatasertib in these 3 cell lines is 2.56, 0.44, and 0.11 μM, respectively. MCE has not independently confirmed the accuracy of these methods. They are for reference only.

In Vivo

Ipatasertib is typically efficacious in xenograft models in which Akt is activated because of genetic alterations including PTEN loss, PIK3CA mutations/amplifications, or HER2 overexpression. In these models, tumor growth delay, stasis, or regression is achieved at or below 100 mg/kg daily oral dose, which is the maximum dose tested in immunocompromised mice that is well tolerated. When tested in vivo, daily dosing of Ipatasertib in combination with RP-56976 induces tumor regression and stasis in the PC-3 and MCF7-neo/HER2 xenograft models, at doses where each single agent is ineffective or only causes modest tumor growth delay. Similarly, increased TGI is observed in the OVCAR3 ovarian cancer xenograft model when Ipatasertib is combined with NSC 241240. The combination of Ipatasertib with RP-56976 or NSC 241240 is tolerated with less than 5% body weight loss when compared with treatment with each chemotherapeutic agent alone. MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Assay

The 384-well plates are seeded with 2,000 cells per well in a volume of 54 μL per well followed by incubation at 37°C under 5% CO 2 overnight (~16 hours). Compounds (e.g., Ipatasertib) are diluted in DMSO to generate the desired stock concentrations then added in a volume of 6 μL per well. All treatments are tested in quadruplicates. After 4 days incubation, relative numbers of viable cells are estimated using CellTiter-Glo and total luminescence is measured on a Wallac Multilabel Reader. The concentration of drug resulting in IC 50 is calculated from a 4-parameter curve analysis (XLfit) and is determined from a minimum of 3 experiments. For cell lines that failed to achieve an IC 50 , the highest concentration tested (10 μM) is listed. MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Animal administration

Mice In vivo efficacy is evaluated in multiple tumor cell line- and patient-derived xenograft models. Cells or tumor fragments are implanted subcutaneously into the flank of immunocompromised mice. Female or male nude (nu/nu) or severe combined immunodeficient mice (SCID)/beige mice are used. The LuCaP35V patient-derived primary tumors are obtained; male mice are castrated before implantation of tumor fragments. After implantation of tumor cells or fragments into mice, tumors are monitored until they reached mean tumor volumes of 180 to 350 mm 3 and distributed into groups of 8 to 10 animals/group. Ipatasertib is formulated in 0.5% methylcellulose/0.2% Tween-80 (MCT) and administered daily (QD), via oral (per os; PO) gavage. RP-56976 is formulated in 3% EtOH/97% saline and dosed intravenously (IV) every week (QW) at 2.5 or 7.5 mg/kg. NSC 241240 is formulated in saline and dosed intraperitoneally (IP) weekly at 50 mg/kg. aladdin has not independently confirmed the accuracy of these methods. They are for reference only.

IC50& Target:Akt1 5 nM (IC 50 ) Akt3 8 nM (IC 50 ) Akt2 18 nM (IC 50 ) PKA 3100 nM (IC 50 )

Specifications

Specifiche e purezza
10mM in DMSO
Meccanismi biochimici e fisiologici
Ipatasertib dihydrochloride (GDC-0068 dihydrochloride) is a highly selective and ATP-competitive pan-Akt inhibitor with IC 50 s of 5, 18 and 8 nM for Akt1 , Akt2 and Akt3 , respectively.
Condizioni di conservazione di stoccaggio
Desiccated,Store at -80°C
Spedito in
Dry ice packs + Cold packs
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Tipo di azione
INHIBITOR
Nomi e identificatori
Isomeri SMILES C[C@@H]1C[C@H](C2=C1C(=NC=N2)N3CCN(CC3)C(=O)[C@H](CNC(C)C)C4=CC=C(C=C4)Cl)O.Cl.Cl
CAS alternativo 1396257-94-5
PubChem CID 62707512
Peso molecolare 530.92

Documentazione

📋 Safety Data Sheet (SDS)

Comprehensive hazard, handling, storage, and regulatory compliance document.

Download SDS →

✅ Certificate of Analysis (COA)

Lot-specific quality data. Enter your lot number to retrieve the exact COA.

Look up COA →

📊 Datasheet

Quick-reference summary of product specifications and applications.

View datasheet →

🔬 Specification Sheet

Full quality attributes and acceptance criteria for this grade.

View spec sheet →

Advanced Data

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Domande frequenti

How should this product be stored?
Store at ?80 °C, desiccated. Keep the container tightly closed with desiccant — the material is moisture-sensitive.
How is this product shipped?
This product ships frozen with dry ice and cold packs. Unpack on arrival and transfer it to the storage condition stated above; handle dry ice with insulated gloves in a ventilated area.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1396257-94-5, the molecular formula is C24H34Cl3N5O2, and the molecular weight is 530.92 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.