L-Proline-¹³C₅ - ≥99 atom% 13C,≥99% , CAS No.201740-83-2

CAS: 201740-83-2 Cat. No.: L474091 Formula: C5H9NO2 Peso molecolare: 120.09
Disponibile su ordine
QUALITÀ & PUREZZA ≥99 atom% 13C,≥99%
Storage
Room temperature
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
100mg
L474091-100mg
Su ordinazione · 8–12 settimane
2.603,13€
Enter a quantity for the sizes you want to add.

Specifiche

Specifiche e purezza
≥99 atom% 13C,≥99%
Condizioni di conservazione di stoccaggio
Room temperature
Purezza
≥99 atom% 13C,≥99%
Nomi e identificatori
SMILES
C1CC(NC1)C(=O)O
IUPAC Name
(2S)-(2,3,4,5-13C4)azolidine-2-carboxylic acid
InChIKey
ONIBWKKTOPOVIA-JRGPAWSWSA-N
InChI
1S/C5H9NO2/c7-5(8)4-2-1-3-6-4/h4,6H,1-3H2,(H,7,8)/t4-/m0/s1/i1+1,2+1,3+1,4+1,5+1
Isomeri SMILES
[13CH2]1[13CH2][13C@H](N[13CH2]1)[13C](=O)O
Peso molecolare
120.09
Reaxys
80809
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=80809&ln=

Dati avanzati

Struttura 3D
Modello di struttura chimica interattiva





Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Proprietà chimiche e fisiche
Punto di fusione (°C)228℃ (dec.) (lit.)
Sicurezza e pericoli (GHS)
Reaxys
80809
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=80809&ln=
RIDADR
NONH for all modes of transport
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

Item‑specific tested applications are not provided. Below are general, non‑clinical research protocols for typical uses of L‑Proline‑¹³C₅.

  • LC‑MS/MS internal standard stock

    • Dissolve accurately weighed solid in water or 50:50 water/MeOH to 1.0 mg/mL.
    • Sonicate briefly if needed; filter through 0.20 µm PTFE or PVDF.
    • Prepare working solutions (e.g., 1–10 µg/mL) in initial mobile phase; spike samples at constant concentration to construct calibration curves.
  • ¹³C NMR sample

    • Dissolve 10–100 mg in 0.6 mL D₂O (or H₂O/D₂O with suitable buffering) to reach 0.2–1.5 M.
    • Acquire ¹³C{¹H} spectra; use inverse‑gated decoupling for quantitative work. Reference with external standard or TSP.
  • Isotope tracing (general, in vitro biochemical systems)

    • Prepare a concentrated aqueous stock (e.g., 100 mM) of L‑Proline‑¹³C₅.
    • Add to the reaction mixture to the desired final concentration; incubate under defined conditions.
    • Quench and analyze isotopologue distributions by LC‑MS; correct for natural abundance and isotopic purity from the CoA.

Note: Parameters should be optimized for your instruments and matrices. Follow institutional guidelines for sample preparation and method validation.

Biological Roles

Content in this section reflects general biochemistry of L‑proline; the ¹³C label enables tracing but does not alter function.

  • Role in proteins (literature)

    • Structural modulator: Proline’s cyclic secondary amine restricts φ torsion angles, often inducing turns and disrupting α‑helices; abundant in collagen as hydroxyproline derivatives.
    • Post‑translational context: Proline residues can be hydroxylated (e.g., 4‑hydroxyproline), affecting extracellular matrix stability.
  • Metabolism

    • Proline–P5C cycle: Interconversion of proline and pyrroline‑5‑carboxylate links to glutamate and ornithine metabolism; participates in redox balance via proline dehydrogenase and P5C reductase.
    • Anaplerosis/catabolism: Catabolism funnels into the TCA cycle via glutamate/α‑ketoglutarate pathways.
  • Isotope tracing utility

    • ¹³C labeling: Enables measurement of proline uptake, synthesis from glutamate, and incorporation into proteins (e.g., collagen) by monitoring ¹³C isotopologue patterns using MS or ¹³C NMR.
    • Turnover studies: Pulse–chase designs quantify pool sizes and turnover kinetics in cells or biochemical systems.

Note: This product is for research use only. No medical or clinical claims are made or implied.

Buffer Applications

L‑Proline‑¹³C₅ is not commonly used as a primary buffer system. While amino acids can exhibit buffering near their pKa values, proline’s buffering capacity is limited and not typically exploited for precise pH control.

  • Practical guidance
    • For experiments requiring controlled pH, use established buffers (e.g., phosphate, HEPES, Tris) and add L‑Proline‑¹³C₅ as a tracer/analyte as needed.
    • If proline is present at significant concentrations in a matrix, account for its zwitterionic nature when modeling ionic strength and pH, but do not rely on it for buffering.

For detailed buffer preparation suitable for your assay, consult validated buffer systems rather than relying on proline.

Green Alternatives

For L‑Proline‑¹³C₅, the principal environmental considerations relate to solvent selection and minimizing waste in analytical workflows rather than replacing the reagent itself.

  • Greener handling strategies (general)

    • Aqueous media first: Prefer water or water/alcohol mixtures for dissolution and sample prep instead of chlorinated or high‑toxicity organics.
    • Micro‑scale standards: Prepare concentrated stocks and use microliter aliquots to lower waste; adopt 96‑well or automated dilution to reduce solvent consumption.
    • Benign modifiers: Use volatile acids/bases (formic/acetic acid, ammonium bicarbonate) to maintain LC‑MS compatibility and ease of waste treatment.
  • Comparative view (literature)

    • Replacing ACN‑rich mobile phases with water/MeOH where chromatographic performance allows can reduce environmental impact.
  • Trade‑offs

    • Higher aqueous content may alter retention and ionization; method re‑optimization (gradient, temperature) may be required to preserve resolution and sensitivity.

Because the isotopologue is essential for tracer accuracy, there is no practical “green substitute” for ¹³C labeling; instead, focus on solvent choice, right‑sizing experiments, and proper segregation of aqueous vs organic waste.

Pharmaceutical Uses

No therapeutic or clinical claims are made for this product. In the context of pharmaceutical research and manufacturing, L‑Proline‑¹³C₅ is used as an analytical tool rather than as a formulation excipient.

  • Typical roles (research/manufacturing analytics)

    • Internal standard in bioanalysis: Supports accurate quantitation of proline in biological matrices (plasma, urine, tissue hydrolysates) by LC‑MS/MS, improving precision and recovery calculations.
    • Stability/forced degradation studies: Traces degradation or conversion pathways in amino‑acid containing formulations via isotopologue tracking.
    • Process analytics: Monitors proline levels in fermentation or cell‑culture media for process development and control.
  • Regulatory context (general)

    • Stable‑isotope standards are commonly used in validated analytical methods, but specifications (purity, isotopic enrichment) should be defined in the method’s acceptance criteria and supported by a Certificate of Analysis.
  • Formulation note

    • When spike‑recovery experiments are performed, match solvent composition (e.g., water/MeOH) and pH to the sample matrix to maintain equivalency and minimize matrix effects.
Physical Properties

Item-specific specifications such as melting point, water content, UV cutoff, and exact solubility are not provided in the Product Data.

  • Item-specific values

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general properties for L‑proline (unlabeled; ¹³C substitution has negligible effect on bulk properties)

    • Physical state: White crystalline solid (literature)
    • Melting point (decomp.): ~220–225 °C (literature)
    • Solubility: Highly soluble in water; sparingly soluble to insoluble in most nonpolar organic solvents; soluble in polar protic media (e.g., methanol, ethanol) to varying degrees (literature).
    • pKa values (25 °C, water): pKa1 (carboxyl) ≈ 1.99; pKa2 (ammonium) ≈ 10.6; pI ≈ 6.3 (literature).
    • LogP (octanol/water): approximately −2.5 (estimated/literature), reflecting high hydrophilicity.
    • Optical rotation (L‑proline, water): [α]D typically negative; magnitude varies with c and T (literature; consult primary sources for exact values).

Notes

  • Reported values are representative for L‑proline; exact numeric specs for this specific ¹³C₅ item are Not specified for this item; refer to CoA/Spec Sheet.
  • Isotopic enrichment does not materially alter solubility or acid–base behavior, but it does shift exact molecular mass for MS/NMR applications.
Quality and Grades
  • Item-specific grade/purity information

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
    • Stabilizers/Additives: Not specified for this item; refer to CoA/Spec Sheet.
  • Interpreting quality for stable‑isotope amino acids (general guidance)

    • Isotopic enrichment: For quantitative MS/NMR, the degree of ¹³C incorporation (e.g., ≥98–99 atom % ¹³C) is typically the most critical parameter. Verify enrichment, positional labeling (uniform vs site‑specific), and residual ¹²C content on the CoA.
    • Chemical purity: High chemical purity minimizes matrix effects and background ions in LC‑MS. Check for residual solvents, inorganic salts, and related amino acids.
    • Optical purity (ee/er): Confirm L‑configuration via chiral HPLC or optical rotation on the CoA to avoid racemization artifacts in biological labeling studies.
    • Residual water/volatile content: Karl Fischer and loss‑on‑drying are often reported; these affect accurate gravimetric preparation of standards.
    • Inorganic content/ash: Low ash/metal content helps prevent ion suppression in ESI‑MS.
  • What to look for on the CoA/Spec Sheet (practical checklist)

    • Isotopic enrichment (% ¹³C), chemical purity (%), specific rotation or chiral purity, KF water, residual solvent profile, and MS (HRMS) confirmation of isotopic pattern.

Note: In the absence of a stated grade, treat this as a research‑use reagent and tailor QC stringency to your analytical application.

Reaction and Applications

This ¹³C‑labeled amino acid is primarily used as a tracer or internal standard rather than as a stoichiometric reagent; however, it retains the chemistry of L‑proline.

  • Stable‑isotope applications (literature/practice)

    • LC‑MS quantitation: Serves as an internal standard for accurate quantification of endogenous proline in biofluids and hydrolysates, correcting for matrix effects and ion suppression.
    • Metabolic flux analysis (MFA): Traces incorporation into proline pools and downstream pathways (e.g., collagen biosynthesis, proline–P5C cycle) using isotope‑resolved MS/NMR.
    • Protein/peptide labeling: Incorporation studies in cell‑free translation or cell culture to follow proline‑rich motifs; analysis by MS of peptide isotopologue distributions.
    • NMR: ¹³C enrichment enhances sensitivity of carbon spectra; useful for conformational and pH‑dependent studies of proline and simple peptides.
  • Reactivity as an amino acid (general chemistry)

    • Amide bond formation: Standard carbodiimide (EDC/HOBt), uronium (HATU/HBTU), or phosphonium (PyBOP) couplings with potential for ring‑nitrogen participation; control racemization at the α‑center.
    • Ester/amide derivatives: Formation of methyl/benzyl esters or N‑acyl derivatives for protecting‑group strategies.
    • Organocatalysis (conceptual): L‑proline is a classical enamine catalyst (e.g., aldol reactions); the ¹³C label can help mechanistic probing via isotopic tracing.
  • Practical tips

    • Use high‑purity water and low‑salt media for MS work; filter stock solutions (0.2 µm) to prevent particulates.
    • Document exact isotopic enrichment and correct for minor ¹²C content in quantitative calculations.
Reaction Conditions

General conditions below reflect literature practice for L‑proline and its derivatives; adjust to your system and consult primary references. These are not item‑specific specifications.

  • Amide coupling (solution phase)

    • Typical reagents: HATU (1.1–1.5 eq), DIPEA (2–4 eq), carboxylic acid partner (1.0 eq); dry DMF or NMP, 0–25 °C, 1–16 h. Minimize base and time to reduce racemization.
    • Aqueous coupling: EDC·HCl (1.1–1.5 eq) with NHS (1.1–1.5 eq) in water or water/DMF, pH 5.0–6.0, 0–25 °C, 0.5–4 h, followed by amine addition pH 7.5–8.5.
  • Esterification (carboxyl protection)

    • Fischer conditions: ROH/HCl(g) or catalytic acid, reflux, 2–12 h; risk of racemization—prefer mild coupling to avoid.
    • Benzyl ester: BnBr, base (NaHCO₃) in water/acetone, or via DCC/DMAP with BnOH in DCM, 0–25 °C.
  • N‑acylation (amine protection)

    • Boc protection: Boc₂O (1.1–1.5 eq), NaHCO₃ or Na₂CO₃ in dioxane/water, 0–25 °C, 1–4 h.
    • Fmoc protection: Fmoc‑OSu (1.1–1.5 eq), NaHCO₃ in water/acetone or dioxane/water, 0–25 °C.
  • Stocks for analytical use (LC‑MS)

    • Preparation: 1–10 mg/mL in water or 50:50 water/MeOH; acidify with 0.1% formic acid for positive‑mode ESI; store aliquots at −20 °C.
  • NMR solutions

    • D₂O at 5–50 mM; adjust pD for sharper spectra; reference via internal standard or residual solvent peak.

Note: Yields and times are typical literature ranges and will vary by substrate and scale.

Safety and Handling

Authoritative safety information should be taken from the product SDS.

  • Item-specific GHS data (from Product Data)

    • Signal Word: Not specified for this item; refer to SDS.
    • H‑Statements: Not specified for this item; refer to SDS.
    • GHS Classification/Pictograms: Not specified for this item; refer to SDS.
  • General handling guidance for amino acids (literature/best practice)

    • Hazards: L‑proline and its stable‑isotope analogs are generally regarded as low hazard laboratory chemicals; avoid inhalation of dust and contact with eyes/skin.
    • PPE: Laboratory coat, safety glasses, nitrile gloves. Use a dust mask or work in a fume hood when handling powders.
    • Hygiene: Avoid generating dust; wash hands thoroughly after handling; do not eat/drink in work area.
    • First aid (overview):
      • Inhalation: Move to fresh air; seek medical attention if symptoms persist.
      • Skin: Wash with soap and water; remove contaminated clothing.
      • Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek medical attention if irritation continues.
      • Ingestion: Rinse mouth; seek medical advice if unwell.
    • Storage incompatibilities: Avoid strong oxidizers and strong acids/bases that could cause degradation; keep containers tightly closed to prevent moisture uptake and caking.
    • Spill/cleanup: Sweep up gently to minimize dust; collect in appropriate container; wash spill area with water.
  • Waste disposal

    • Dispose of in accordance with institutional and local regulations for nonhazardous organic solids.
Solvent Selection

L‑Proline‑¹³C₅ is a zwitterionic, highly polar solid. Solvent choice is governed by the need for complete dissolution and compatibility with the analytical or reaction system.

  • Polarity and miscibility (literature)

    • Primary solvent: Water (excellent solubility).
    • Alcohols: Methanol and ethanol often dissolve at moderate to high concentrations; useful for LC‑MS stock solutions (consider water/MeOH mixes to improve wetting).
    • Aqueous buffers: Suitable near neutral pH; adjust pH to enhance solubility if needed.
    • Aprotic organics: Poorly soluble in acetonitrile, DMSO can dissolve to moderate levels but may not be ideal for all assays; insoluble in nonpolars (e.g., hexane, toluene).
  • Practical selection by application

    • LC‑MS internal standards: Water or water/MeOH (50:50 v/v) with 0.1% formic acid for positive‑mode ESI; avoid salts where possible.
    • NMR solutions: D₂O is preferred; add a drop of dilute base or acid if required to sharpen signals by fixing ionization state.
    • Peptide coupling/bioconjugation: Use water or mixed aqueous/organic media (e.g., water/DMF) if coupling free amino acid; protected derivatives are typically handled in anhydrous DMF/DCM.
  • Comparison (general)

    • Water vs MeOH: Water maximizes solubility and biocompatibility; MeOH improves LC elution and reduces surface tension in ESI. A 1:1 mix balances both for standards.
Storage and Reconstitution
  • Item-specific storage/shipping

    • Storage Conditions: Room temperature (as provided).
    • Shipped In: Not specified for this item; refer to CoA/Spec Sheet.
  • General storage guidance (solid)

    • Keep tightly closed in a clean, dry container; protect from moisture to prevent caking and to ensure accurate weighing.
    • Store away from strong oxidizers and reactive chemicals; standard benchtop chemical cabinet is suitable.
  • Solution stability (general, not item‑specific specs)

    • Aqueous stock solutions are typically stable for days at 2–8 °C and weeks to months at −20 °C when aliquoted to avoid repeated freeze–thaw.
    • Use polypropylene or glass vials compatible with aqueous/alcoholic media.
  • Reconstitution

    • Dissolve in water or water/alcohol mixtures to the desired concentration; gentle warming or brief sonication may help dissolution.
    • For LC‑MS, consider adding 0.1% formic acid to improve ionization and reproducibility; filter through 0.20 µm if particulate is present.

Always consult the product’s CoA and SDS for definitive guidance on storage limits, stability, and handling precautions.

Structure and Identity

L‑Proline‑¹³C₅ is the universally ¹³C‑labeled isotopologue of the proteinogenic amino acid L‑proline, useful as a stable‑isotope tracer and internal standard.

  • Item-specific identifiers (from Product Data)

    • Product Name: L‑Proline‑¹³C₅
    • CAS: 201740-83-2
    • InChIKey: 262440 (as provided)
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/computed identity details (for context; isotopic labeling does not change connectivity)

    • Base skeleton (L‑proline): A five‑membered pyrrolidine ring bearing a carboxylic acid at the stereogenic C2; secondary amine ring (proline is a cyclic secondary α‑amino acid).
    • Stereochemistry: L‑configuration at the α‑carbon (S in CIP for L‑proline’s natural form).
    • Functional groups: Secondary amine (in ring), carboxylic acid; forms a zwitterion near neutral pH.
    • Typical formula (isotopically labeled): ¹³C₅H₉NO₂ (literature)
    • Approximate molecular weight increase vs unlabeled: +5.0168 Da; unlabeled L‑proline MW ≈115.13 g/mol; ¹³C₅ variant ≈120.15 g/mol (literature/computed).
  • 2D structural description (general)

    • The molecule consists of a saturated five‑membered ring (–NH–CH₂–CH₂–CH–) fused conceptually to the α‑carbon that bears a carboxylate/acid substituent; all five ring carbons are ¹³C in this isotopologue. The α‑center is chiral and in the L configuration, giving the natural amino acid stereochemistry.
Synthetic Utility

Although primarily an analytical tracer, L‑Proline‑¹³C₅ retains the synthetic versatility of L‑proline, enabling isotopic labeling in target molecules.

  • Building block for labeled compounds

    • Peptide synthesis: Incorporate into peptides/proteins to create ¹³C‑enriched sequence motifs for MS/NMR characterization. Protected derivatives (e.g., Fmoc‑L‑Pro(¹³C₅)‑OH) are typically preferred for SPPS.
    • Derivatization: Conversion to esters (e.g., methyl/benzyl) or N‑acyl proline enables installation into more complex architectures while retaining the ¹³C label at carbon positions.
  • Mechanistic and tracing studies

    • Organocatalysis: Use ¹³C labels to follow enamine/iminium pathways in proline‑catalyzed aldolizations (isotope scrambling/kinetic isotope effects via ¹³C NMR/MS).
    • Metabolite mapping: Synthesize labeled proline derivatives (e.g., ¹³C‑hydroxyproline) to study collagen maturation and turnover.
  • Reaction considerations (general)

    • Protect the amine (Boc/Fmoc) and/or carboxyl (tBu/benzyl) as required; preserve stereochemistry at the α‑center (avoid strong base/heat that can racemize).
    • Choose coupling reagents that minimize epimerization (HATU/HOAt; EDCI with auxiliary additives) and control pH during aqueous‑phase couplings.

Document isotopic enrichment throughout multi‑step sequences by HRMS and, where possible, quantitative ¹³C NMR to confirm label integrity.

Target Specificity

This product is a small‑molecule amino acid standard, not a biological affinity reagent. Target specificity parameters (antigen, clone, isotype, species reactivity) do not apply.

Domande frequenti

What is the purity of this product?
This product is isotopically enriched to ≥99 atom% carbon-13. Isotopic enrichment is a separate specification from chemical purity — a labelled compound has both. This product is supplied at ≥99% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 201740-83-2, the molecular formula is C5H9NO2, and the molecular weight is 120.09 g/mol. InChIKey ONIBWKKTOPOVIA-JRGPAWSWSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.