Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No item-specific validated protocols are provided in the Product Data. Below are general literature-style workflows for typical applications; adjust to your system and consult the CoA/SDS.
LC–MS/MS quantitation of proline (internal standard approach):
Prepare 1–10 mM stock in water (or 50:50 water:ACN) with 0.1% formic acid; store aliquots.
Spike samples with a fixed concentration of L-Proline-¹³C₅,¹⁵N (e.g., 1–5 µM final) prior to extraction.
Extract with cold MeOH or MeOH:water (80:20), centrifuge, dry, and reconstitute in mobile phase.
LC: HILIC or reversed-phase with ion-pairing/derivatization; MS: ESI+ MRM targeting +6 Da shift relative to native proline.
GC–MS analysis (derivatized):
Dry sample thoroughly, add MTBSTFA (or BSTFA) with ACN, heat 60 °C for 30 min, inject; monitor labeled/unlabeled fragment ions.
Use standard Fmoc/tBu chemistry; couple labeled Fmoc-Pro with HBTU/HATU; verify incorporation by HRMS of intermediates and final peptide.
These are illustrative, non-validated examples. For regulated analyses, develop full system suitability, calibration, and QA/QC procedures.
Biological Roles
Content in this section is general/literature-based for L-proline; isotopic enrichment does not alter biological function but enables tracing and quantitation.
Core roles:
Proteinogenic amino acid incorporated into proteins; proline imposes conformational constraints and often appears in turns and collagen triple helices (as Pro and hydroxyproline).
Osmoprotectant and compatible solute in many organisms; contributes to stress responses and redox balance.
Metabolic node: interconverts with pyrroline-5-carboxylate (P5C); links to ornithine/urea cycle and TCA intermediates via glutamate.
Uses of labeled proline in biology:
Tracer for collagen biosynthesis and turnover studies via incorporation into newly synthesized collagen and tracking by MS or NMR.
Flux analysis of the proline–P5C cycle and mitochondrial redox coupling using isotopomer distributions.
Internal standard in targeted metabolomics to normalize extraction and ionization variability for proline quantitation.
Considerations:
In cell culture, metabolic scrambling (e.g., arginine-to-proline conversion) can yield secondary labeling; interpret isotopomer data with appropriate controls and modeling.
L-stereochemistry is essential for normal biosynthetic incorporation; confirm enantiopurity when studying biosynthetic pathways.
Buffer Applications
L-proline is not a primary buffering agent in the narrow-pH sense like HEPES or phosphate. However, as a zwitterionic amino acid it can contribute modest buffering around its pI (~6.3) and is frequently used as an additive in biochemical buffers.
Practical (literature) uses:
Protein stabilization: Inclusion at 0.1–0.5 M in aqueous buffers (e.g., 20 mM HEPES, pH 7.4) can enhance protein solubility and reduce aggregation by osmolyte effects.
Enzymology and formulation: Serves as an osmoprotectant/lyoprotectant in assay and formulation buffers; compatible with common salts and many cofactors.
Preparation tips:
Dissolve directly in water/buffer; adjust pH with NaOH/HCl as needed. Proline’s buffering capacity is limited; pair with a true buffer (e.g., HEPES, MOPS, ammonium acetate for MS).
For MS workflows, prefer volatile counterions (ammonium) and avoid high phosphate that suppresses ESI signals.
Example buffer additive (illustrative):
20 mM HEPES, 150 mM NaCl, 0.2–0.4 M L-proline, pH 7.4 for protein stabilization studies.
Note: Exact concentrations and compatibility should be optimized per protein/assay; no item-specific buffer specs are provided.
Green Alternatives
As a solid amino acid/tracer, green considerations revolve around solvent systems and derivatization chemistry rather than replacing the compound itself.
Greener choices for common workflows (literature):
LC–MS sample prep: favor aqueous, volatile buffers (ammonium formate/acetate) over nonvolatile salts (phosphate) to reduce waste and improve instrument uptime.
Avoid chlorinated solvents in derivatization; use acetonitrile or ethanol where compatible.
For silylation-based GC–MS, minimize excess derivatization reagent and adopt micro-scale protocols to cut solvent/reagent consumption.
Comparison (illustrative):
Aqueous extraction vs MeOH-rich extraction: Aqueous or water–MeOH (≤50% MeOH) often achieves sufficient recovery for amino acids, reducing VOC emissions.
SPE cleanup vs liquid–liquid extraction: Solid-phase extraction can reduce solvent volumes and improve safety.
Process efficiency:
Using ¹³C/¹⁵N internal standards can decrease the number of calibration runs and re-analyses, reducing total solvent and sample consumption.
Note: The isotopic label is integral to the analytical purpose; there is no direct “greener substitute” for ¹³C₅,¹⁵N when isotopic fidelity is required.
Pharmaceutical Uses
No therapeutic claims are made. The following are formulation/manufacturing roles from general literature; item-specific pharmacopeial status is not provided.
Typical roles of L-proline in formulations (literature):
Excipient as stabilizer/osmolyte in biologics (e.g., antibodies, enzymes), helping maintain conformational stability during storage and lyophilization.
Cryo/lyoprotectant and isotonicity adjuster in parenteral or ophthalmic formulations.
Component in protein refolding buffers and virus inactivation formulations.
Relevance of isotope label:
¹³C₅,¹⁵N labeling is generally not required for final drug products but is valuable in process development, degradation pathway elucidation, leachables/extractables studies, and quantitative bioanalytical assays as an internal standard.
Compliance and quality:
For any use near GMP settings, confirm chemical purity, residual solvents, bioburden/endotoxin (if applicable), and isotopic enrichment on the item’s CoA/Spec Sheet (Not specified for this item; refer to CoA/Spec Sheet).
Physical Properties
Item-specific physicochemical specifications: Not specified for this item; refer to CoA/Spec Sheet.
Literature/computed values for the labeled/unlabeled analogue (for guidance only; isotopic substitution does not materially change bulk properties):
Molecular formula (labeled): ¹³C₅H₉¹⁵NO₂ (literature)
Molecular weight (labeled, calculated): ~121.1 g/mol (literature; +6.0 Da relative to unlabeled L-proline, 115.13 g/mol)
Appearance: crystalline solid (literature for L-proline)
Melting point: ~220–225 °C (decomp., literature for L-proline)
pKa values (25 °C, water, literature for L-proline): pKa₁ (–CO₂H) ≈ 1.95; pKa₂ (–NH⁺) ≈ 10.6; isoelectric point (pI) ≈ 6.3
Solubility (literature): highly soluble in water; freely soluble in dilute acids/bases; sparingly soluble in ethanol; negligible in nonpolar solvents
LogP/XlogP3 (literature, for L-proline): ~−2.5 to −2.7 (very hydrophilic)
Exact solubility, mp, and optical rotation can vary with isotopic enrichment, counterions, and measurement conditions; consult the item’s CoA for definitive values.
Quality and Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Isotopic enrichment: Not specified for this item; refer to CoA/Spec Sheet.
Context for isotopically labeled amino acids (general/literature):
Typical certificates include: chemical purity (%), isotopic enrichment for ¹³C and ¹⁵N at specified positions, residual unlabeled isotope content, and water/volatile content (Karl Fischer) — when applicable.
Common grades:
Isotopic tracer grade: defined ¹³C/¹⁵N enrichment; used in metabolomics, fluxomics, and quantitative LC–MS.
NMR grade: high chemical purity and enrichment suitable for heteronuclear NMR (e.g., ¹H–¹³C/¹H–¹⁵N HSQC) of labeled biomolecules.
Impurity profiles important to note:
Diastereomeric purity (L- vs D-proline)
Residual inorganic salts from synthesis
Trace metal content when relevant to catalytic or biophysical assays
Practical guidance:
Verify isotopic distribution (M+1…M+6 envelopes) via HRMS to confirm labeling fidelity for quantitative studies.
For quantitative LC–MS internal standards, match the labeled analyte’s retention/ionization closely to the native analyte; ¹³C/¹⁵N labeling is preferred to avoid chromatographic isotope effects seen with deuterium.
Always consult the item-specific CoA for exact enrichment, chemical purity, and any stabilizers or residual solvents.
Reaction and Applications
Key uses arise from its isotopic labeling rather than intrinsic reactivity.
Analytical applications (literature):
Internal standard for quantitative LC–MS/MS of proline in metabolomics, clinical chemistry research, and fluxomics. ¹³C₅,¹⁵N provides a +6 Da mass shift with near-identical chromatographic/ionization behavior.
Stable-isotope tracer in cell or animal studies to probe proline metabolism, collagen biosynthesis, and proline–P5C cycling via incorporation and subsequent isotopomer analysis (GC–MS or LC–HRMS).
NMR labeling to monitor proline residues in peptides/proteins or to study proline-rich motifs by ¹³C/¹⁵N HSQC and relaxation experiments (when incorporated biosynthetically).
Chemical/bioconjugation uses (literature):
Precursor for preparing labeled derivatives (e.g., Fmoc-L-Pro-¹³C₅,¹⁵N) for SPPS to introduce site-specific labels into peptides.
Derivatization for chromatographic detection: Marfey’s reagent (FDAA) or AccQ-Tag for UV/fluorescence LC analysis; silylation (BSTFA/MTBSTFA) for GC–MS.
Practical tips:
Verify isotopic purity by HRMS of underivatized and derivatized forms to rule out isotope scrambling.
When used in cell culture, consider arginine→proline metabolic conversion pathways that can create secondary labeling; design controls accordingly.
For LC–MS/MS MRM, select transitions reflecting +6 Da shift (e.g., b/y ions in peptides or characteristic fragment ions of proline derivatives).
Reaction Conditions
General literature guidance for typical transformations and analytical derivatizations involving L-proline (apply analogous conditions to the labeled material, verifying isotopic integrity):
Amide coupling (to form labeled dipeptides/peptidomimetics):
Solvent: DMF or NMP (anhydrous)
Reagents: HATU or HBTU (1.0–1.2 eq), base DIPEA (2–3 eq)
Temperature: 0–25 °C; time: 0.5–4 h
Notes: Protect the secondary amine (e.g., Boc/Fmoc) as needed to control selectivity; monitor by LC–MS.
Fmoc protection (for SPPS):
Reagents: Fmoc-Cl (1.1–1.5 eq), Na2CO3 or NaHCO3 in aqueous/acetone or dioxane–water biphasic; 0–25 °C
Alternatively, Fmoc-OSu in DMF with DIPEA, 0–25 °C.
GC–MS derivatization (for volatility):
Silylation: BSTFA + 1% TMCS or MTBSTFA in anhydrous acetonitrile or pyridine; 60–70 °C, 15–30 min.
LC pre-column derivatization (UV/Fluor):
Marfey’s reagent (FDAA) in acetone/NaHCO3 (0.1 M), 40–50 °C, 1 h; quench with acid before LC.
NMR sample prep:
Dissolve in D2O or H2O/D2O with appropriate buffer; reference chemical shifts to internal standards; ¹³C/¹⁵N labeling enhances sensitivity in HSQC/HMBC.
All parameters are representative literature ranges. Optimize stoichiometry/temperature and validate by LC–MS/HRMS to confirm preservation of the +6 Da isotopic signature.
Safety and Handling
Regulatory/GHS (item-specific):
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General safety considerations (literature/typical for amino acids):
Low acute toxicity; typically not classified as hazardous. Avoid inhalation of dust and contact with eyes.
Recommended PPE: lab coat, safety glasses, and gloves (nitrile); handle as a fine organic powder to minimize dust.
First aid overview: If inhaled, move to fresh air; if on skin/eyes, rinse with water; if ingested, rinse mouth. Seek medical attention if symptoms persist. Always follow your institution’s EHS guidelines.
Handling and incompatibilities:
Hygroscopicity: amino acids can absorb moisture; keep container tightly closed under dry conditions.
Chemical incompatibilities: strong oxidizers may react with organic material; avoid mixing with strong mineral acids/bases unless controlled for dissolution/adjusting pH.
Thermal stability: stable under ambient lab conditions; avoid excessive heat to prevent decomposition.
Waste disposal:
Dispose of aqueous solutions and solids according to local regulations for nonhazardous organic laboratory waste, unless contaminated by hazardous reagents.
Authoritative safety information is provided in the product SDS; defer to the SDS for risk phrases, exposure limits, and emergency measures.
Solvent Selection
This product is a zwitterionic, highly polar amino acid; solvent choice is driven by dissolution and application needs rather than extraction or reaction media.
Solubility profile (literature, L-proline):
Water: highly soluble; dissolution is accelerated by gentle warming and stirring.
Aqueous buffers: excellent solubility; final pH governed by Henderson–Hasselbalch around pKa values (≈1.95 and ≈10.6).
Alcohols (MeOH/EtOH): limited solubility; co-solvents with water often required.
Polar aprotic (DMF/DMSO): soluble; DMSO stocks (e.g., 0.1–1 M) are feasible but water is generally preferred for bioanalytical workflows.
For LC–MS: prepare aqueous stocks; adjust pH with volatile buffers (ammonium formate/acetate) to ensure MS compatibility.
For GC–MS: derivatize (e.g., TBDMS/TMS with BSTFA or MTBSTFA) to improve volatility, using anhydrous solvents (pyridine, acetonitrile).
For peptide coupling or protection chemistry: use DMF/NMP with base (e.g., DIPEA) under anhydrous conditions.
Small comparison (literature-based):
Water vs DMSO: Water maximizes biological compatibility and preserves zwitterion; DMSO enables high-concentration stocks but may complicate downstream assays.
Aqueous volatile buffers vs PBS: Volatile buffers are preferred for MS; phosphate buffers favor enzymology but suppress ESI response.
Storage and Reconstitution
Item-specific storage: Room temperature (from Product Data).
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/best practice for amino acids and isotopic standards):
Keep tightly capped in a dry environment; use desiccant to minimize moisture uptake.
Protect from prolonged exposure to high humidity and strong light to prevent caking or degradation of sensitive derivatives.
Reconstitution: dissolve in water or compatible buffer; filter (0.2 µm) for bioanalytical applications. Typical stock concentrations: 1–100 mM depending on assay.
Aqueous stock stability: store aliquots at −20 °C to 4 °C to limit microbial growth and preserve concentration; avoid repeated freeze–thaw cycles by preparing single-use aliquots.
For GC–MS derivatization, ensure samples are completely dry prior to reagent addition to prevent incomplete silylation.
Documentation:
Record preparation date, concentration, solvent, and pH of stocks; verify concentration by UV (after derivatization), NMR, or quantitative amino acid analysis where critical.
Always defer to the product label/CoA/SDS for specific storage and stability claims for this lot.
Structure and Identity
Isotopically enriched L-proline labeled with five 13C atoms and one 15N, suitable as a metabolic tracer or MS/NMR internal standard.
Item-specific identifiers (from Product Data):
SKU: L471824
Product Name: L-Proline-¹³C₅,¹⁵N
CAS: 202407-23-6
PubChem CID: 71310238
InChIKey: 262447 (as provided)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Structure (general/literature description):
Core scaffold: a five-membered saturated pyrrolidine ring (secondary amine) bearing a carboxylic acid at the 2-position (i.e., a secondary amino acid). Stereochemistry is L (S at C-2 of the amino acid center).
Isotopic composition: ¹³C₅ labeling spans the five ring/side-chain carbons; ¹⁵N labels the ring nitrogen. A representative formula notation is ¹³C₅H₉¹⁵NO₂ (literature).
Functional groups: secondary amine (as part of the pyrrolidine), carboxylic acid; zwitterionic at neutral pH.
2D description in words: a cyclic secondary amine (pyrrolidine) where the alpha carbon (chiral) is bonded to the carboxyl group (–CO₂H) and incorporated into the ring; substituents arrange to give L-configuration.
Synthetic Utility
From a synthetic standpoint, L-Proline-¹³C₅,¹⁵N serves as a labeled chiral building block and tracer.
Functional group reactivity (literature):
Carboxylic acid amenable to activation (acid chlorides, mixed anhydrides) or coupling (HATU/HBTU/EDC) for amide formation.
Secondary amine subject to protection (Boc, Cbz, Fmoc) and subsequent peptide coupling; pyrrolidine ring limits typical N-acylation patterns (on the ring N) versus side-chain substitution.
Applications:
Synthesis of isotopically labeled peptides/proteins via SPPS or chemoenzymatic ligation, enabling site-specific ¹³C/¹⁵N NMR or MS readouts.
Preparation of labeled derivatives for chiral analysis (e.g., Fmoc-Cl, Marfey’s reagent) to aid method development.
Calibration standards: formation of stable isotope-labeled internal standards for metabolite derivatization (e.g., TBDMS/TMS ethers for GC–MS calibration).
Retrosynthetic value:
Retains L-stereocenter; using labeled L-proline preserves chirality and locates isotope labels at defined backbone positions in peptide products, minimizing isotope effects versus deuterium labels.
Cautions:
Maintain isotopic integrity; avoid conditions that could induce exchange or scrambling (not an issue for ¹³C/¹⁵N under most conditions but consider transamination in biological matrices).
Target Specificity
Not applicable. This product is a small-molecule isotopically labeled amino acid, not an antibody, enzyme, or affinity reagent. No target, clone, isotype, or species reactivity information applies to this item.
Domande frequenti
What is the purity of this product?
This product is isotopically enriched to ≥98 atom% carbon-13. Isotopic enrichment is a separate specification from chemical purity — a labelled compound has both. This product is isotopically enriched to ≥98 atom% nitrogen-15. Isotopic enrichment is a separate specification from chemical purity — a labelled compound has both. This product is supplied at ≥95% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 202407-23-6, the molecular formula is C5H9NO2, and the molecular weight is 121.09 g/mol. InChIKey ONIBWKKTOPOVIA-XAFSXMPTSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.