LB Broth - BioReagent, CellNourish™ Basic

Cat. No.: L113084
Disponibile su ordine
QUALITÀ & PUREZZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. CellNourish™ Basic ? CellNourish™ Basic — cost-efficient culture media for routine cell growth. Use for standard maintenance and expansion where premium media aren't needed.
Synonyms
Luria-Bertani|Lysogeny broth
Storage
Room temperature,Argon charged
Shipped In
Normal
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
250g
L113084-250g
2 Disponibile
4 Disponibile
141,35€
Enter a quantity for the sizes you want to add.

Panoramica

Lennox LB is a highly-referenced microbial growth medium used for the cultivation of E. coli. This nutrient-rich microbial broth contains peptides, amino acids and carbohydrates in a low-salt formulation.
Suitable for non-selective cultivation of E. coli strains for cloning, DNA plasmid production and production of recombinant proteins. Also suitable for selective cultivation when appropriate antibiotics are added, including those that require low-salt conditions,

Weigh 20 g of this product, add 1 L of distilled water or deionized water, stir and heat to boil until completely dissolved, divide into test tubes or conical flasks, and sterilize at 121°C for 15 minutes. For general bacterial culture, especially for the preservation and enrichment of Escherichia coli in molecular biology experiments.


Specifiche

Sinonimi
Luria-Bertani | Lysogeny broth
Specifiche e purezza
BioReagent, CellNourish™ Basic
Condizioni di conservazione di stoccaggio
Room temperature,Argon charged
Spedito in
Normal
Grado
BioReagent, CellNourish™ Basic

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

7 results found

Lot NumberCertificate TypeDataOggetto
D2615387D2615387Certificate of AnalysisMar 16, 2026 L113084
E2520520E2520520Certificate of AnalysisMay 09, 2025 L113084
I2301137I2301137Certificate of AnalysisAug 09, 2023 L113084
I2301138I2301138Certificate of AnalysisAug 09, 2023 L113084
D23061702D23061702Certificate of AnalysisOct 31, 2022 L113084
D23061709D23061709Certificate of AnalysisOct 31, 2022 L113084
G2222494G2222494Certificate of AnalysisJun 18, 2022 L113084
Proprietà chimiche e fisiche
SensibilitàMoisture sensitive
Domande frequenti e articoli
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No manufacturer-validated assay protocols are specified for this item.

  • General/literature protocol example: LB Broth (Miller) 1 L

    • Weigh 25 g LB powder into a suitable flask.
    • Add ~900 mL high-purity water; stir to dissolve. Bring to 1.0 L with water.
    • Optional: Verify pH near 7.0.
    • Autoclave at 121 °C for 15–20 min (liquid cycle). Cool to ~50 °C.
    • Aseptically add antibiotics/inducers as needed. Mix and dispense.
  • Agar plates (literature)

    • Prepare LB agar by adding ~15 g/L agar before autoclaving.
    • After sterilization, cool to ~50–55 °C, add antibiotics, pour plates, and allow to set. Store plates bagged at 2–8 °C to minimize desiccation.

These procedures are provided as general guidance only; adjust for your strain, selection markers, and laboratory SOPs.

Biological Roles

LB Broth functions as a nutrient reservoir supporting heterotrophic bacterial growth.

  • Functional components (literature)

    • Peptone/tryptone: Supplies peptides and free amino acids as carbon and nitrogen sources; provides growth factors for rapid biomass accumulation.
    • Yeast extract: Contributes vitamins (B-complex), nucleotides, trace elements, and additional amino acids that support robust growth and stress tolerance.
    • Sodium chloride: Maintains osmotic balance and influences membrane transport and antibiotic interactions.
  • Cellular processes supported (literature)

    • DNA replication and plasmid maintenance: Adequate nucleotide and amino acid availability supports high-copy plasmid propagation during overnight cultures.
    • Protein biosynthesis: Rich nitrogen sources sustain high translational activity; however, unbuffered acidification can limit very high-density cultures.
    • Stress responses: Complex nutrients can partially buffer against oxidative and osmotic stresses compared with minimal media, improving recovery after transformation.
  • Limitations (literature)

    • Undefined composition: Batch-to-batch variability can affect metabolite profiles, gene expression, and downstream product purity (e.g., endotoxin, proteases).
    • Low buffering capacity: Metabolic acid production can drop pH below optimal ranges during prolonged incubation, affecting viability and plasmid stability.

These roles describe general biological behavior of LB-type media and are not item-specific claims.

Buffer Applications

LB Broth is not a dedicated buffering system.

  • General guidance (literature)

    • Intrinsic buffering is weak; pH can drift significantly during exponential growth due to organic acid production. As such, LB is not recommended where tight pH control is critical (e.g., enzyme assays requiring constant pH).
    • If pH stability is required, consider adding a defined buffer (e.g., 50–100 mM phosphate, MOPS) to LB, or use a fully defined, well-buffered medium (e.g., MOPS EZ Rich, M9 with phosphate).
  • Practical tips

    • When adding buffers, verify compatibility with antibiotics and inducers; phosphate can chelate metals and alter antibiotic activity in some cases (literature).
    • Adjust starting pH near neutrality (pH ~7.0) prior to sterilization for best performance; fine-tune after sterilization only if performed aseptically (literature).
Green Alternatives

For microbiological media, “green chemistry” considerations focus on resource use, waste minimization, and sterilization energy rather than solvent substitution.

  • Opportunities (literature/good practice)

    • Right-sizing sterilization: Consolidate autoclave loads and use validated liquid cycles to reduce energy and water consumption.
    • Reusable ware: Prefer glass media bottles and autoclavable carboys over single-use plastics when biosafety allows.
    • Concentrate strategy: Prepare media at use-driven scales to minimize expired, unused sterile broth. Avoid overproduction that leads to biohazardous waste.
    • Additive stewardship: Prepare antibiotic stocks at appropriate concentration and aliquot to reduce freeze–thaw waste; dispose of antibiotic-containing waste per local regulations to limit environmental impact.
    • Alternative media: For specific applications, defined minimal media (e.g., M9, MOPS-buffered) can reduce variability and downstream purification burden, which may lower overall resource use despite slower growth.
  • Packaging & handling

    • Store tightly sealed to limit moisture uptake and caking, which can otherwise increase waste due to clumping and reduced flow.

These points are general sustainability practices; they are not item-specific specifications.

Pharmaceutical Uses
  • Item-specific status

    • Research Use Only. Not for human or animal therapeutic or diagnostic use.
  • Context in pharmaceutical R&D (literature)

    • Upstream research: Commonly used for non-GMP propagation of plasmids, cloning strains, and expression pre-cultures during strain construction and method development.
    • Screening: Supports early-stage construct verification and small-scale expression tests before transfer to production media.
    • Not a GMP medium: This SKU is not supplied with GMP documentation or pharmacopeial compliance. For regulated manufacturing, use qualified media with appropriate release testing, traceability, and change control.
  • Formulation/excipient role

    • LB Broth is not used as a formulation excipient; its role is limited to microbial growth in research settings.
Physical Properties
  • Item-specific specs

    • Appearance, density, pH, moisture content, and ash: Not specified for this item; refer to CoA/Spec Sheet.
  • General/literature properties (non-binding; typical values)

    • Physical state: Dehydrated, free-flowing powder; solution is clear to slightly opalescent after sterilization.
    • Solubility: Freely soluble in purified water (Type 1/18 MΩ·cm) to prepare media at typical loadings (literature).
    • Typical working concentration: Commonly 25–35 g/L depending on LB variant and application (literature). For example, LB (Miller) 25 g/L; LB agar adds ~15 g/L agar (literature).
    • pH (at 25 °C): Typical 1% w/v solution pH ≈ 6.8–7.2 before sterilization; final medium typically near neutral (literature). Actual pH depends on water quality and lot composition.
    • Osmolality: Driven primarily by NaCl and low–MW solutes; increases with “Miller” salt level (literature).
    • Hygroscopicity: Media powders can be moisture-sensitive; caking may occur on prolonged air exposure (literature).
  • Practical notes

    • Filterability: Sterile filtration feasible for broth using 0.22 µm PES or PVDF membranes; not suitable for agar-containing formulations (literature).
    • Light/heat: Routine autoclaving at 121 °C is standard for sterilization; excessive heating can darken the medium (Maillard reactions) and reduce performance (literature).

All physical-property statements above, unless labeled as item-specific, are general literature guidance and not specifications for this SKU.

Quality and Grades
  • Item-specific grade

    • BioReagent, CellNourish™ Basic.
  • What this means (general guidance)

    • BioReagent grade: Suitable for routine research applications, microbial cultivation, cloning workflows, and general molecular biology where a defined GMP or low-bioburden pharmacopeial standard is not required.
    • CellNourish™ Basic: Aladdin’s baseline nutrient-medium line emphasizing reliable growth support for common laboratory strains. Not a defined or chemically pure mixture; lot-to-lot natural variation in hydrolysate components is inherent to LB-type media.
  • Typical quality considerations for LB (literature)

    • Sterility: Dehydrated medium is not sterile. Users must sterilize by autoclaving or sterile filtration (broth only).
    • Performance: Growth yield and doubling time can vary with peptone source, yeast extract lot, and salt level. Many labs qualify lots with a reference E. coli strain.
    • UV absorbance/endotoxin/metals: Not specified for this item; refer to CoA/Spec Sheet if applicable. For sensitive applications (e.g., endotoxin-limited plasmid prep), consider testing or using specialized media grades.
    • Moisture content and pH: Not specified for this item; refer to CoA/Spec Sheet.
  • Documentation

    • CoA/Spec Sheet provides lot-specific metrics (if available). For regulated work, this SKU is intended for research use only and is not supplied with GMP documentation.
Reaction and Applications

As a complex microbial growth medium, LB Broth is used for cultivation and routine propagation of bacteria, especially laboratory strains of Escherichia coli.

  • Core applications (literature)

    • Cloning workflows: Recovery after transformation, overnight cultures for plasmid maintenance, colony picking into broth, and glycerol stock preparation.
    • Protein expression: Pre-cultures (inocula) for expression in richer media; in some cases, direct expression when moderate yields suffice.
    • Phage and general bacteriology: Maintenance cultures and titering steps where high growth rate is advantageous.
  • Medium tuning (literature)

    • Salt level: “Miller” (10 g/L NaCl) vs. “Lennox” (5 g/L NaCl) affects osmolarity and can influence antibiotic potency and growth. Low-salt LB is preferred for some salt-sensitive selections.
    • Buffering: LB has minimal intrinsic buffering; inclusion of phosphate buffer (e.g., 50–100 mM) stabilizes pH during high-density growth but may affect antibiotic efficacy (e.g., tetracycline).
    • Carbon sources: Supplement with 0.2–0.5% glucose or glycerol to modulate acidification and growth characteristics.
  • Practical tips (literature)

    • Aeration: Use 1:5 to 1:10 flask fill volume with vigorous shaking (200–250 rpm) for aerobic organisms; baffles improve oxygen transfer.
    • Antibiotics: Add sterile stocks after cooling to ≤50 °C. Verify activity ranges (e.g., ampicillin commonly 50–100 µg/mL; exact values depend on strain and objective).
    • Monitoring: OD600 of 0.4–0.6 for log phase; harvest plasmid preps typically at OD600 ~2–3, recognizing LB’s limited buffering can drive pH drop at high densities.
Reaction Conditions

For LB Broth, the relevant “conditions” are preparation and sterilization parameters for microbiological use.

  • Preparation (literature; typical guidance)

    • Working concentration: Commonly 25 g/L for LB (Miller) broth; LB agar is prepared by adding ~15 g/L agar before sterilization. Alternative salt variants (e.g., Lennox at lower NaCl) are used case-by-case.
    • Dissolution: Add powder to high-purity water while stirring until fully dissolved. Adjust volume with water; optional pH check near 7.0.
    • Sterilization: Autoclave at 121 °C for 15–20 min (liquid cycle). Do not over-autoclave to avoid nutrient degradation. Allow to cool to ~50 °C before adding heat-labile components (e.g., antibiotics, IPTG) under aseptic conditions.
    • Plates: For agar media, cool to ~50–55 °C, add antibiotics, mix gently to avoid bubbles, and pour into sterile plates. Allow to solidify; dry plates briefly in a laminar hood before bagging and storing at 2–8 °C.
  • Cultivation parameters (literature)

    • Inoculation: 1:100 from an overnight culture or single colony.
    • Incubation: 30–37 °C typical for E. coli; 200–250 rpm orbital shaking; use 5–10× headspace for aeration.
    • Monitoring: OD600 for growth; harvest in log phase for physiological studies or late-log/early stationary for routine plasmid preps.

These are general literature conditions and not specifications of this item.

Safety and Handling
  • Item-specific hazard data

    • GHS classification, signal word, H-statements, pictograms: Not specified for this item; refer to SDS.
  • General laboratory safety guidance (literature/practice; not a substitute for SDS)

    • Expected hazards: Complex nutrient media are generally considered low hazard but may cause dust irritation to eyes, skin, and respiratory tract. Avoid inhalation of powders and contact with eyes/skin.
    • PPE: Laboratory coat, safety glasses, and appropriate gloves (e.g., nitrile). Use dust control (weighing in fume hood or with local exhaust) to minimize airborne particulates.
    • Handling
      • Prevent microbial contamination of the dry medium and solution. Use aseptic technique during preparation and dispensing.
      • When autoclaving, do not overfill vessels; loosen caps to prevent pressure buildup. Beware of hot containers and superheated liquids upon removal.
    • Incompatibilities (literature): Strong oxidizers may degrade organic constituents; store away from moisture to prevent caking and premature microbial growth.
    • First aid (overview)
      • Inhalation: Move to fresh air; seek medical advice if irritation persists.
      • Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing.
      • Ingestion: Rinse mouth; seek medical advice if unwell.
  • Microbiological risk management

    • Post-use cultures can contain high densities of microorganisms. Decontaminate by autoclaving or appropriate disinfectants before disposal, per institutional biosafety procedures.

Always consult the product’s SDS and your institution’s EHS policies for authoritative safety information.

Solvent Selection

This product is an aqueous culture medium; organic solvent selection is not typically relevant.

  • Item-specific note

    • Reconstitution solvent: High-purity water. No other solvent is recommended.
  • Practical guidance (literature)

    • Water quality: Use Type 1 (≥18 MΩ·cm) deionized water or equivalent cell-culture/molecular-biology grade to minimize variability and precipitation.
    • Miscibility: Fully miscible in water at working concentrations. Do not prepare with alcohols or other organics, which can inhibit microbial growth.
    • Degassing: Not required. If sterile filtering, pre-wet membranes (per manufacturer) and avoid foaming to maintain nutrient integrity.
    • Additives: Antibiotics, inducers (e.g., IPTG), or supplements should be added after sterilization and cooling to ≤50 °C to preserve activity (literature).
  • Comparison (literature)

    • LB vs. defined media (M9): LB offers faster growth and higher biomass but lower reproducibility and less control of metabolic state. Defined media support tighter physiological control and isotope labeling at the expense of growth rate.
Storage and Reconstitution
  • Item-specific storage

    • Storage conditions: Room temperature, Argon charged (from Product Data). Keep container tightly closed to limit moisture uptake. Shipped under normal conditions.
  • Reconstitution (general literature guidance)

    • Solvent: High-purity water (Type 1 or equivalent). Dissolve to the desired working concentration with stirring.
    • Sterilization: Autoclave at 121 °C for 15–20 min, or sterile-filter broth through a 0.22 µm membrane. Do not autoclave antibiotics or other heat-labile additives.
    • Additives: After cooling to ≤50 °C, aseptically add sterile antibiotic stocks and other supplements.
  • Shelf life and prepared media (literature)

    • Dry powder: Store cool and dry, sealed against humidity. Avoid repeated opening; consider aliquoting under dry, inert atmosphere if available.
    • Sterile broth: Store at 2–8 °C; use within 1–2 weeks for best performance. Inspect for turbidity, pH shift, or precipitation before use.
    • Agar plates: Store inverted in sealed bags at 2–8 °C; typical usability 2–4 weeks depending on antibiotics and drying.
  • Specifications not provided for this SKU

    • Exact shelf life, moisture content limits, and pH specs: Not specified for this item; refer to CoA/Spec Sheet.

Always follow institutional aseptic techniques and verify performance with a control strain where critical.

Structure and Identity

LB Broth (Luria–Bertani) is an undefined, nutrient-rich microbiological growth medium supplied as a blended preparation rather than a single chemical substance.

  • Item-specific facts (from Product Data)

    • Product type: Complex microbiological medium (LB Broth)
    • Grade: BioReagent, CellNourish™ Basic
    • CAS/SMILES/InChIKey/Molecular formula/MW: Not applicable to complex mixtures; Not specified for this item; refer to CoA/Spec Sheet.
  • General description (literature)

    • Typical constituents: pancreatic digest of casein (tryptone/peptone), yeast extract (vitamins/growth factors), and sodium chloride (osmotic balance). Exact ratios vary by LB variant (e.g., Miller vs. Lennox).
    • Nature of mixture: Polydisperse peptides, amino acids, nucleosides, minerals, vitamins, and salts. No single stereochemistry or discrete molecular structure applies.
    • Physical form: Usually a free-flowing, beige to light tan, dehydrated powder that readily dissolves in water to form a clear to slightly opalescent solution after sterilization (literature).
  • Structural features (conceptual)

    • Functional groups present across the mixture include peptide bonds, amino acids (amines/carboxylates), carbohydrates, nucleobases, and inorganic ions (literature). Because the composition is undefined, exact structural identifiers are not assignable.
  • Synonyms and variants (literature)

    • Luria Broth, Luria–Bertani Broth; common salt variants: LB (Miller), LB (Lennox), and LB (no salt).
Synthetic Utility

This product is a complex biological growth medium, not a discrete chemical reagent or building block.

  • Not typically applicable

    • It is not used as a reagent in organic synthesis, cross-coupling, or other small-molecule transformations.
  • Related workflows (literature)

    • Synthetic biology and genetic engineering: LB is foundational for maintaining plasmids, cloning vectors, and engineered strains that later enable biocatalysis or biosynthetic pathways. Its “utility” is biological—supporting cells that perform the synthetic step—rather than chemical.
Target Specificity

Not applicable. This product is a microbiological medium and is not an antibody, probe, or affinity reagent. No target, epitope, isotype, or species reactivity applies to this SKU.

Domande frequenti

What does CellNourish? Basic mean?
CellNourish? Basic indicates that the product has been processed and tested for cell culture and tissue engineering. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at room temperature under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Hai bisogno di aiuto per scegliere la qualità?

La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.

Visualizza la guida alle qualità BioReagent → Visualizza la guida alle qualità CellNourish™ Basic →

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.