m-PEG9-amine - ≥98% , CAS No.211859-73-3

CAS: 211859-73-3 Cat. No.: M596357 Formula: C19H41NO9 Peso molecolare: 427.53
Disponibile su ordine
QUALITÀ & PUREZZA ≥98%
Synonyms
mPEG9-NH2|m-PEG9-amine|2-[2-[2-[2-[2-[2-[2-[2-(2-methoxyethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethanamine|2,5,8,11,14,17,20,23,26-NONAOXAOCTACOSAN-28-AMINE
Storage
Store at 2-8°C,Protected from light
Shipped In
Wet ice
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
250mg
M596357-250mg
Su ordinazione · 8–12 settimane
39,83€
1g
M596357-1g
Su ordinazione · 8–12 settimane
164,78€
5g
M596357-5g
Su ordinazione · 8–12 settimane
746,17€
Enter a quantity for the sizes you want to add.

Panoramica

m-PEG9-amine is a PEG derivative containing an amino group. The amino group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The hydrophilic PEG spacer increases solubility in aqueous media.

m-PEG9-Amine is a PEG-based PROTAC linker can be used in the synthesis of PROTACs. m-PEG9-Amine is a cleavable ADC linker used in the synthesis of antibody-drug conjugates (ADCs)

Specifiche

Sinonimi
mPEG9-NH2 | m-PEG9-amine | 2-[2-[2-[2-[2-[2-[2-[2-(2-methoxyethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethanamine | 2,5,8,11,14,17,20,23,26-NONAOXAOCTACOSAN-28-AMINE
Specifiche e purezza
≥98%
Condizioni di conservazione di stoccaggio
Store at 2-8°C,Protected from light
Spedito in
Wet ice
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Purezza
≥98%
Nomi e identificatori
SMILES
COCCOCCOCCOCCOCCOCCOCCOCCOCCN
IUPAC Name
2-[2-[2-[2-[2-[2-[2-[2-(2-methoxyethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethanamine
InChIKey
FYQAZBUDEOSOFG-UHFFFAOYSA-N
InChI
1S/C19H41NO9/c1-21-4-5-23-8-9-25-12-13-27-16-17-29-19-18-28-15-14-26-11-10-24-7-6-22-3-2-20/h2-20H2,1H3
Isomeri SMILES
COCCOCCOCCOCCOCCOCCOCCOCCOCCN
Peso molecolare
427.53
Reaxys
13153689
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=13153689&ln=

Dati avanzati

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassOrganic oxygen compounds
ClasseOrganooxygen compounds
SubclassEthers
Intermediate Tree Nodes Not available
Direct ParentDialkyl ethers
Alternative Parents Monoalkylamines  Hydrocarbon derivatives  
Molecular FrameworkAliphatic acyclic compounds
Substituents Dialkyl ether - Organic nitrogen compound - Hydrocarbon derivative - Primary amine - Organonitrogen compound - Primary aliphatic amine - Amine - Aliphatic acyclic compound
DescrizioneThis compound belongs to the class of organic compounds known as dialkyl ethers. These are organic compounds containing the dialkyl ether functional group, with the formula ROR', where R and R' are alkyl groups.
External Descriptors Not available
Struttura 3D
Modello di struttura chimica interattiva





Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDataOggetto
H2611461H2611461Certificate of AnalysisJan 23, 2026 M596357
Proprietà chimiche e fisiche
SensibilitàLight sensitive
Peso molecolare427.5
XLogP3-2.000
Hydrogen Bond Donor Count1
Hydrogen Bond Acceptor Count10
Rotatable Bond Count26
Exact Mass427.278 Da
Monoisotopic Mass427.278 Da
Topological Polar Surface Area109.000 Ų
Heavy Atom Count29
Formal Charge0
Complexity288.000
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
Sicurezza e pericoli (GHS)
Reaxys
13153689
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=13153689&ln=
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No tested-application protocols are provided in the Product Data for SKU M596357. Refer to the literature and your internal SOPs for protocol development.

General workflow pointers (informational only; not product-validated):

  • Preparing stock: Dissolve m-PEG9-amine in water, PBS, or anhydrous DMF/DMSO depending on application. Filter (0.22 µm) for bioconjugation work.
  • NHS-ester conjugation: Buffer at pH 7.5–8.5 (phosphate/bicarbonate), avoid Tris/glycine. Combine NHS-activated partner with 5–20× molar excess of amine; incubate 30–120 min at RT; quench residual NHS ester with ethanolamine if needed.
  • EDC/NHS coupling to carboxyls: Activate the acid in MES buffer (pH ~5.5) with EDC/NHS, then add m-PEG9-amine in PBS (pH 7.5–8.0). Purify by dialysis/UF.
  • Reductive amination: Mix aldehyde-bearing substrate with m-PEG9-amine in MeOH/H2O (pH ~6), add picoline borane (or NaBH3CN), incubate until completion; purify by SEC.

Always validate conditions (pH, stoichiometry, time) with small-scale trials before scale-up.

Biological Roles

General information (literature; not a medical/clinical claim):

  • PEG as stealth polymer: Poly(ethylene glycol) chains form a dense hydration shell that reduces protein adsorption and cell adhesion (steric repulsion), widely used to passivate surfaces and biomolecules.
  • Charge state: The terminal primary amine is protonated under physiological conditions (pH ~7.4), enhancing electrostatic interactions with anionic partners before covalent attachment.
  • Spacer/linker function: A nine-unit PEG segment provides nanometer-scale spacing between conjugated entities, often improving solubility, reducing aggregation, and preserving bioactivity of attached ligands/biomolecules.
  • Reduced immunogenic recognition (materials context): PEG coatings can decrease opsonization and uptake by phagocytic cells on materials; actual biological outcomes depend on density, chain length, and architecture.
  • Biocompatibility: PEG backbones are generally considered biocompatible and non-fouling in in vitro systems; the amine end enables site-selective modification of carboxyl- or aldehyde-presenting biomolecules and surfaces.

Notes:

  • No specific biological activity is inherent to m-PEG9-amine beyond its physicochemical roles as a hydrophilic, flexible spacer and a nucleophilic handle.
  • Performance depends on grafting density, distribution (brush vs mushroom regime), and co-present functional groups.
  • For sensitive biomolecules, conduct small-scale screens to optimize linker length, pH, and buffer composition to maintain activity.
Buffer Applications

Applicability: m-PEG9-amine is not a buffering agent. However, its conjugation performance depends strongly on buffer identity and pH. Below are general/literature considerations for using this reagent in aqueous buffers (not item-specific instructions).

Common buffer systems for amine-based coupling:

  • EDC/NHS coupling to carboxyls: Activate in mildly acidic buffer (e.g., MES, pH 4.5–6.0). Perform amine coupling step at pH 7.5–8.0 in PBS or HEPES to favor amine nucleophilicity while limiting hydrolysis.
  • NHS-ester capture: Bicarbonate or phosphate buffer, pH 7.5–8.5. Avoid primary amine-containing buffers (e.g., Tris, glycine) that compete with the reaction.
  • Reductive amination: Sodium phosphate or acetate buffer, pH 5.5–6.5 for imine formation; then reduce with picoline borane or NaBH3CN. Include 10–30% ethanol/water or ACN/water as needed.

Practical tips (literature):

  • Salt effects: 50–150 mM ionic strength (NaCl) can reduce nonspecific electrostatic interactions during conjugation to biomolecules.
  • Concentration: Prepare fresh solutions; typical working solutions for conjugation are in the 1–100 mM amine range depending on partner density (optimize empirically).
  • Filtration: 0.22–0.45 µm filtration reduces particulates before use with proteins or nanoparticles.

Note: Specific buffer recipes, pH windows, and stoichiometries should be validated for the intended substrate. Avoid Tris or other primary amine buffers when using NHS-activated electrophiles.

Green Alternatives

Context: While m-PEG9-amine is a reagent (not a solvent), its use often involves organic solvents and coupling reagents. Greener choices can reduce environmental and safety burdens without compromising performance.

Greener media for conjugation (general/literature):

  • Water/buffers (MES, HEPES, PBS): Preferred for EDC/NHS couplings and NHS-ester ligations; add ≤30% ethanol or isopropanol to aid hydrophobic partner solubility.
  • Bio-based solvents: Ethyl acetate or 2-methyltetrahydrofuran (2-MeTHF) can replace DMF/CH2Cl2 for non-aqueous activations (e.g., CDI, DSC) when substrates permit.
  • Alcohol/water mixtures: MeOH/H2O or EtOH/H2O for reductive amination; switch to EtOH for improved safety profile.

Reagent choices and tradeoffs (general):

  • EDC/NHS (aqueous) vs HATU/HBTU (aprotic): EDC reduces halogenated waste and avoids uronium salts but may give more hydrolysis; buffer carefully (pH 4.5–6 for activation, 7.5–8.5 for coupling).
  • Picoline borane vs NaBH3CN: Lower toxicity alternative for reductive amination in aqueous media.

Small comparison (general; not item-specific):

  • DMF: powerful solvent; reproductive toxin; difficult to remove from water-rich matrices.
  • DMSO: lower hazard than DMF; high boiling point complicates removal.
  • Ethanol/water: renewable, lower toxicity; may slow some couplings but usually adequate with modest time increases.

Process tips:

  • Use solid-supported coupling reagents or enzyme-mediated ligations (e.g., T4-NHS ester reactions in water) when feasible.
  • Implement dialysis/UF for solvent minimization instead of precipitation with large solvent excesses.
Pharmaceutical Uses

Scope: The following reflects general formulation/manufacturing context for PEG-based linkers and excipients; it is not a therapeutic claim and not specific to this item.

General roles of m-PEG oligomer amines (literature/industry practice):

  • Surface modification: PEGylation of device or packaging surfaces to reduce protein adsorption and fouling during bioprocessing.
  • Conjugation handle: The amine terminus enables downstream conversion to amides/ureas/carbamates, producing PEGylated ligands, capture agents, or polymer intermediates used in formulation development.
  • Solubilizing spacer: Incorporation into conjugates to improve aqueous solubility and reduce aggregation in process intermediates.
  • Precursor to other functional PEGs: Conversion to NHS esters, aldehydes (via oxidation), or quaternary ammonium species for specialized formulation components.

Regulatory/quality notes:

  • Pharmacopeial status: Not specified for this item; refer to CoA/Spec Sheet.
  • Residuals: For cGMP-adjacent work, control residual solvents/reagents and document end-group fidelity and oligomer distribution.
  • Extractables/leachables: When used on materials contacting drug product, perform risk assessments and appropriate analytical monitoring.

Process considerations:

  • Purification: Dialysis/UF or SEC can remove small-molecule residuals post-conjugation.
  • Analytics: 1H NMR (end-group integration), LC–MS/MALDI (oligomer profile), TNBS/OPA assays (amine content) support lot qualification.
Physical Properties

Item-specific (from Product Data):

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics of m-PEG oligomer amines (informational only; not item specifications):

  • Physical state: typically viscous liquid, waxy solid, or semi-solid depending on exact n and dispersity. m-PEG9-amine is often a low-melting wax or viscous syrup.
  • Solubility: highly soluble/miscible in water and most polar protic/aprotic solvents (e.g., methanol, ethanol, isopropanol, acetonitrile, DMF, DMSO); limited solubility in nonpolar hydrocarbons (hexanes, toluene).
  • Hygroscopicity: PEG oligomers are hygroscopic; water uptake can be significant under ambient humidity.
  • Acidity/basicity: terminal primary amine is basic (pKaH for alkyl primary amines typically ~9–10, literature). Overall aqueous solutions are neutral to slightly basic depending on concentration and counterions.
  • Viscosity: increases with concentration and decreases with temperature; solutions are typically low-foaming.
  • Thermal behavior: PEG chains soften upon heating; discrete boiling/melting points are less informative due to oligomer distributions; thermal decomposition precedes boiling under ambient pressure (literature for PEGs).
  • Refractive index/density: PEG oligomers generally have nD ~1.45–1.47 and densities ~1.05–1.15 g/mL near room temperature, varying with chain length (literature; not specific to this item).

Note: For exact constants (MW, RI, water content, UV cutoff), consult the item’s CoA/SDS.

Quality and Grades

Item-specific (from Product Data):

  • Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret quality for PEG oligomer amines (general guidance):

  • Purity vs. dispersity: For discrete m-PEGn reagents, “purity” often reflects the proportion of the target oligomer (n = 9) relative to adjacent homologs (n = 8, 10, etc.). Look for reported dispersity (Ð or Poisson distribution) and HPLC/LC–MS data on the CoA.
  • End-group fidelity: High-quality m-PEG9-amine exhibits >95% correct end-group installation (one methoxy cap, one primary amine) with minimal di- or unfunctionalized species. Verification is typically by 1H NMR end-group analysis and MALDI-TOF/ESI-MS.
  • Water/peroxide/metal limits: Not specified for this item; refer to CoA/Spec Sheet. These can matter in sensitive conjugations or metal-catalyzed steps.
  • Residual solvents/reagents: Check CoA for residual DMF, DCM, or coupling reagents (e.g., CDI, carbodiimides) if relevant to your application.
  • Application fit:
    • Bioconjugation/surface work: Prefer lots with narrow oligomer distribution and low UV background (if using optical readouts).
    • Materials synthesis: End-group fidelity may be more critical than oligomer monodispersity depending on downstream polymerization/assembly.
  • Documentation: For regulated workflows, request CoA with analytical traces (NMR, MS, HPLC/GC), moisture (KF), and amine value (titration) if available.
Reaction and Applications

General/literature applications for m-PEG9-amine (informational; not item-specific performance claims):

  • Amide formation: Couples readily with activated carboxyls (NHS esters, acid chlorides, anhydrides) to afford m-PEG9-amides. Commonly used for PEGylating carboxylate-bearing ligands, dyes, and surfaces. EDC/NHS or HATU/HBTU protocols apply.
  • Urea/carbamate linkages: Reaction with isocyanates or chloroformates to give ureas/carbamates, enabling attachment to polyurethanes or carbonate-activated substrates.
  • Reductive amination: Condensation with aldehydes/ketones to form imines, reduced with NaBH3CN or picoline borane to stable secondary amines—useful for modifying oxidized glycans or aldehyde-terminated surfaces.
  • Thiourea formation: Reaction with isothiocyanates (e.g., FITC) to append reporter groups.
  • NHS-ester capture: Rapid conjugation to NHS-activated esters at pH 7.5–8.5 for bioconjugation.
  • Surface passivation: Grafting to carboxyl-rich nanoparticles (Au, silica, carbon, polymer beads) or planar substrates to impart stealth, reduce nonspecific adsorption, and tune hydrophilicity/spacer length.
  • Polymer/materials synthesis: Serves as a hydrophilic macroinitiator precursor (after further functionalization), crosslinker arm in hydrogels, or compatibilizer in blocky architectures.

Practical notes (literature):

  • Maintain pH control: amide coupling optimal near pH 6 (EDC/NHS activation) and 7.5–8.5 for amine attack on NHS esters.
  • Use slight excess of amine (1.2–2.0 equiv) to drive to completion; remove excess by dialysis (1–3 kDa MWCO), ultrafiltration, or preparative chromatography.
  • Minimize hydrolysis: add electrophiles last; keep reactions dry when using moisture-sensitive activators.
Reaction Conditions

General conditions from literature (guidance only; optimize per substrate; not item specifications):

  • Amide coupling to carboxyls (EDC/NHS, aqueous):

    • Buffer: MES (pH 4.7–6.0) for activation, then adjust to pH 7.5–8.0 with PBS/HEPES for coupling.
    • Stoichiometry: 1.0 equiv acid, 1.2–2.0 equiv m-PEG9-amine, 1.2–2.0 equiv EDC, 1.2–2.0 equiv NHS.
    • Temperature/time: 20–25 °C, 0.5–4 h activation; 1–16 h coupling. Protect from light if chromophores present.
  • NHS-ester ligation (aqueous):

    • Buffer: 50–100 mM phosphate or bicarbonate, pH 7.5–8.5. Avoid primary amine buffers (Tris/glycine).
    • Concentration: 1–50 mM amine; 0.5–5 mM NHS ester (bioconjugation scale). Reaction 15 min–2 h at 20–25 °C.
  • Reductive amination:

    • Solvent: MeOH/H2O or ACN/H2O; pH 5.5–6.5 for imine formation.
    • Reductant: 1.5–3.0 equiv NaBH3CN or picoline borane.
    • Temp/time: 20–37 °C, 2–16 h.
  • Isocyanate addition (urea formation):

    • Solvent: anhydrous DMF, DMSO, or EtOAc.
    • Base: none or mild tertiary amine (if needed). 0–25 °C, 1–4 h.

Workup/purification (general):

  • Aqueous systems: Dialysis (1–3 kDa MWCO) or ultrafiltration to remove small molecules; SEC for precision.
  • Organic systems: Precipitate PEG-containing products into cold MTBE/Et2O to remove nonpolar impurities; or flash chromatography with polar eluents.

Quality control:

  • Monitor by LC–MS/MALDI, TNBS/OPA assay (amine consumption), or UV/Vis if chromophores present.
Safety and Handling

Item-specific (from Product Data):

  • GHS classification: Not specified for this item; refer to SDS.
  • Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
  • Storage conditions: Store at 2–8 °C, protected from light.
  • Shipped in: Wet ice.
  • Research use: For research use only.

General safety guidance (literature/general for PEG amines; defer to SDS for authoritative information):

  • Expected hazards: Primary amines can be skin/eye irritants and may cause respiratory irritation as aerosols/mists. PEG backbones are generally of low acute toxicity.
  • PPE: Wear lab coat, safety glasses, and suitable chemically resistant gloves (e.g., nitrile). Use in a fume hood during weighing, dissolving, and coupling reactions to avoid inhalation of aerosols or reagent vapors (e.g., carbodiimides, NHS esters).
  • Incompatibilities: Avoid strong oxidizing agents; strong acylating/alkylating agents without control; isocyanates; acid chlorides (react vigorously). For coupling chemistry, control stoichiometry and pH to minimize side reactions.
  • First aid (overview): In case of skin/eye contact, rinse with water for at least 15 minutes; remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth and seek medical advice. Provide SDS to medical personnel.
  • Handling notes: Hygroscopic—minimize air exposure. The amine may absorb CO2 forming ammonium carbamate films; cap promptly. Use dry tools/solvents when moisture-sensitive coupling reagents are present.
  • Waste: Collect aqueous/organic PEG-containing waste according to institutional policies; avoid drain disposal unless permitted.
Solvent Selection

General solvent behavior (literature; not item specifications):

  • Polarity/miscibility: m-PEG9-amine is highly polar and typically completely miscible with water and polar organics (MeOH, EtOH, IPA, acetone, acetonitrile, DMF, DMSO). Limited solubility in nonpolar solvents (hexane, cyclohexane); partial in toluene/EtOAc depending on temperature.
  • Dielectric environment: Ether-rich backbones solvate cations; the terminal amine is protonatable, improving water solubility at neutral–slightly basic pH.

Choosing solvents by application (general guidance):

  • Aqueous amide coupling (EDC/NHS): water or MES/HEPES buffer with co-solvent (10–50% DMF or DMSO) for hydrophobic partners.
  • NHS-ester ligations: PBS or bicarbonate buffer, pH 7.5–8.5; keep organic co-solvent ≤30% to maintain target solubility.
  • Reductive amination: aqueous alcohols (MeOH/H2O or EtOH/H2O), or ACN/H2O with NaBH3CN or picoline borane.
  • Surface grafting on nanoparticles/polymers: anhydrous DMF, DMSO, or ACN for homogeneous wetting; switch to aqueous buffer after activation.

Small comparison (general):

  • Water/buffer: green, biocompatible; slower for poorly soluble electrophiles.
  • DMF/DMSO: excellent solvent power; consider toxicity and downstream removal.
  • Alcohols (MeOH/EtOH): greener than DMF; can participate in side reactions with activated esters at high pH—control time/pH.

Tip: Filter or centrifuge solutions to remove particulates before sensitive bioconjugations; pre-degas if using oxygen-labile partners.

Storage and Reconstitution

Item-specific (from Product Data):

  • Storage: Store at 2–8 °C, protected from light.
  • Shipping: Wet ice.

General handling/reconstitution guidance (literature; not item specifications):

  • Container: Keep tightly closed under inert gas or dry air; include desiccant to limit moisture uptake. PEG amines are hygroscopic and can absorb CO2.
  • Light protection: Use amber vials or foil wrapping to comply with “protected from light.”
  • Reconstitution solvents: Water, PBS, methanol, ethanol, acetonitrile, DMF, or DMSO depending on application needs. Start with minimal volume and adjust to target concentration.
  • Stock solutions: Prepare fresh when possible. For short-term storage (days to a week), 2–8 °C is typically suitable. For longer-term storage, freezing at −20 °C can be used if allowed by your process; avoid repeated freeze–thaw by aliquoting.
  • Stability notes: Avoid prolonged exposure to high pH (>9) to limit oxidative/discoloration processes and side reactions. Keep away from strong oxidizers and reactive acylating agents during storage.
  • Quality checks: If precipitation or discoloration occurs, warm gently to RT and mix; verify integrity by 1H NMR or MS for critical applications.

For definitive shelf life, allowable impurities, and reconstitution concentrations, consult the product’s CoA and SDS.

Structure and Identity

Brief overview: m-PEG9-amine is a monofunctional polyethylene glycol oligomer featuring a terminal primary amine and a methoxy cap on the opposite end. It serves as a hydrophilic spacer/linker for conjugation to carboxylates and other electrophiles.

Item-specific (from Product Data):

  • SKU: M596357
  • Product name: m-PEG9-amine
  • CAS: 211859-73-3
  • PubChem CID: 23501889
  • InChIKey: 95599 (as provided)
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general/literature description):

  • Backbone: nine ethylene glycol repeat units (–CH2–CH2–O–)n with n ≈ 9 (literature; oligomeric PEG).
  • End-groups: one end is methoxy-capped (mPEG); the other end is a primary amine (–NH2).
  • Functional groups: polyether chain (multiple ether oxygens) and a terminal primary amine (nucleophilic/basic).
  • Topology: flexible, highly solvated chain; no rings; no stereocenters.
  • 2D description: a linear sequence of alternating –CH2–CH2– and –O– linkages terminated by –O–CH3 at one end and –(CH2)m–NH2 at the other (linker length to amine may vary by supplier; consult CoA for exact structure).
Synthetic Utility

Functional handles and reactivity (general/literature):

  • Nucleophilic terminus: The primary amine reacts with activated carboxyls (NHS esters, acid chlorides), carbonyls (reductive amination), isocyanates (ureas), and chloroformates (carbamates). This enables modular attachment to diverse scaffolds.
  • Hydrophilic spacer: The PEG9 segment introduces water compatibility and spacing, mitigating steric hindrance and decreasing nonspecific interactions in conjugates and on surfaces.
  • Conversion to other handles: The amine can be transformed into azide (via diazotransfer on a suitable precursor), amide-activated esters (via succinylation/NHS ester formation), or quaternary ammonium salts for further click-like transformations.

Retrosynthetic value:

  • Break complex bioconjugates into (a) electrophilic partner, (b) m-PEG9-amine linker, and (c) target substrate, enabling orthogonal assembly with aqueous-compatible chemistry.
  • Provides a defined-length spacer that simplifies structure–property studies across linker lengths (e.g., PEG4/6/9/12 series).

Practical synthesis notes:

  • Protecting groups: If orthogonality is needed, transiently protect the amine (Boc, Fmoc) and deprotect under mild conditions compatible with PEG backbones.
  • Workup: Excess m-PEG9-amine is removable by aqueous dialysis (1–3 kDa MWCO) or SEC; salting-out/antisolvent precipitation (Et2O/MTBE) can isolate PEGylated small molecules.
  • Characterization: End-group analysis by 1H NMR (–OCH3 singlet; methylene adjacent to –NH2) and MS to confirm oligomer distribution.
Target Specificity

Not applicable. This product is a small-molecule/oligomeric linker (m-PEG9-amine), not an antibody or affinity reagent. No antigen/epitope or species reactivity applies.

Item-specific note: No target specificity information is provided in the Product Data for SKU M596357.

Domande frequenti

What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at 2–8 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 211859-73-3, the molecular formula is C19H41NO9, and the molecular weight is 427.53 g/mol. InChIKey FYQAZBUDEOSOFG-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.