This compound belongs to the class of organic compounds known as benzoic acid esters. These are ester derivatives of benzoic acid.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Proprietà chimiche e fisiche
Peso molecolare
210.230 g/mol
XLogP3
2.000
Hydrogen Bond Donor Count
0
Hydrogen Bond Acceptor Count
4
Rotatable Bond Count
5
Exact Mass
210.089 Da
Monoisotopic Mass
210.089 Da
Topological Polar Surface Area
44.800 Ų
Heavy Atom Count
15
Formal Charge
0
Complexity
193.000
Isotope Atom Count
0
Defined Atom Stereocenter Count
0
Undefined Atom Stereocenter Count
0
Defined Bond Stereocenter Count
0
Undefined Bond Stereocenter Count
0
The total count of all stereochemical bonds
0
Covalently-Bonded Unit Count
1
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No assay/application protocols (e.g., WB, IHC, IF, FC) apply to this small-molecule building block. For synthetic use, see the Reaction & Applications and Reaction Conditions sections for general laboratory procedures such as acetal deprotection and downstream transformations.
Biological Roles
This product is a small organic building block (aromatic ester bearing an acetal) and is not a biological molecule. It has no known endogenous biological role, receptor affinity, or metabolic function.
General notes (literature/chemistry context)
The dimethoxymethyl group is an acetal protecting group commonly used in organic synthesis; such acetals are generally hydrolyzed in vivo to the corresponding carbonyl compounds and alcohols, but this compound is intended strictly for research and laboratory synthesis.
Aromatic esters can undergo metabolic hydrolysis by esterases in biological systems; however, this item is not intended for biological administration. No biochemical pathway relevance is established.
Research Use Note
For research use only. Not for human or animal use, diagnostic, or therapeutic applications.
Buffer Applications
Not typically applicable. Methyl 4-(dimethoxymethyl)benzoate is a neutral, hydrophobic organic building block and is not used to prepare aqueous buffer systems. If your workflow involves aqueous steps (e.g., acetal hydrolysis), select a buffer/acid system compatible with acetal chemistry (e.g., dilute HCl or p-TsOH in aqueous alcohol) and control pH to target hydrolysis selectively without saponifying the ester.
Green Alternatives
Greener choices typically relate to solvent and reagent selection around this substrate rather than the substrate itself.
Solvent substitutions (literature guidance)
Replace DCM/CHCl3 with 2-MeTHF or CPME for extractions and Lewis-acid-mediated steps where acetal stability is required. These ethers offer lower toxicity, higher boiling points (facilitating temperature control), and better safety profiles.
Use EtOAc or IPA instead of toluene/hexanes where feasible for crystallization and chromatography eluents, reducing VOC impact.
For acetal hydrolysis, aqueous ethanol or methanol with catalytic organic acids (e.g., p-TsOH) can substitute for strong mineral acids in halogenated solvents.
Comparison snapshot
DCM: Excellent solvency; volatile; higher environmental and safety concerns.
2-MeTHF: Bio-based, water-immiscible, good for moisture-sensitive steps; stabilizes acetals; recyclable.
CPME: Broad solubility window, low peroxide formation compared to ethers like THF, good for azeotropic water removal.
EtOAc: Safer extraction and chromatography solvent; biodegradable; compatible with ester/acetal functionality.
Reagent choices
Catalytic Brønsted acids (p-TsOH, CSA) in alcoholic/water media for deprotection instead of stoichiometric mineral acids where possible.
Employ solid acids (Amberlyst-15) for heterogeneous catalysis, simplifying workup and reducing aqueous waste.
Trade-offs
2-MeTHF/CPME have higher boiling points, potentially lengthening solvent removal. CPME odor and cost may be drawbacks. Always re-optimize reaction times/temperatures.
Pharmaceutical Uses
No pharmacopeial excipient status or formulation role is indicated for this item.
General context (literature/industry practice)
Compounds of this type are used as synthetic intermediates/building blocks during medicinal chemistry and process development. The dimethoxymethyl group functions as a protecting group for an aryl aldehyde, improving handling and stability versus the free aldehyde.
After deprotection to the corresponding aldehyde (methyl 4-formylbenzoate), the molecule can be elaborated into more complex scaffolds (e.g., via olefination or condensation) in API candidate synthesis.
Compliance note
For research use only. Not intended for use as an active ingredient, excipient, or in any clinical application.
Physical Properties
Item-specific properties from Product Data
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Literature/computed values (for reference; not item specifications)
Molecular formula: C11H14O4 (calculated from structure)
Molecular weight: ~210.23 g/mol (calculated)
Physical state: Expected to be a low-melting solid or high-boiling liquid typical of substituted methyl benzoates bearing acetals (literature analogy). Exact MP/BP not located in standard references.
Boiling point: Not specified for this item; refer to CoA/Spec Sheet. (No reliable literature value located.)
Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Density (20–25 C): Not specified for this item; refer to CoA/Spec Sheet.
Refractive index: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Expected to be soluble in common organic solvents (e.g., dichloromethane, ethyl acetate, toluene, alcohols) and poorly soluble in water (literature expectation for aryl esters and acetals). Quantitative values not located.
LogP (octanol/water): Not specified; estimated to be moderately lipophilic based on functionality (literature expectation for aryl esters with acetals).
Notes
Where exact values are needed (e.g., for process design, chromatography), consult the product’s CoA/Spec Sheet or measure under your conditions.
Quality and Grades
Item-specific information
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on grades and implications (general)
Research grade organic building blocks are typically specified by assay (e.g., NMR/GC/HPLC area %) and may include limits for key impurities (starting materials, regioisomers, solvents). If low-UV or trace-metal specifications are critical (e.g., for photochemistry or catalysis), verify on the CoA.
For chromatography-sensitive work (e.g., trace analysis), “HPLC grade” or “UV-cutoff characterized” solvents/reagents reduce baseline noise; however, such designations are uncommon for discrete building blocks like this ester/acetal.
Water/peroxide/metal limits: Not specified for this item; refer to CoA/Spec Sheet. If your transformation is moisture- or acid-sensitive (e.g., reactions relying on the intact acetal), consider verifying Karl Fischer moisture on receipt.
Recommendations
Request current CoA/Spec Sheet for assay method (NMR/GC/HPLC), residual solvents, and identity confirmation (e.g., 1H/13C NMR, MS).
If using in Pd-catalyzed cross-couplings after derivatization, low halide or sulfur impurities can matter—check impurity profile if yields are sensitive.
For scalable work, qualify a retained sample and document lot-to-lot reproducibility in your process.
Reaction and Applications
Use profile
Protecting-group chemistry: The dimethoxymethyl moiety is the dimethyl acetal of the corresponding para-formyl substituent. It serves as an acid-labile protecting group for the aryl aldehyde in the presence of a benzoate ester.
Aldehyde equivalent: Under controlled acidic hydrolysis, it furnishes methyl 4-formylbenzoate, enabling downstream transformations that require the aldehyde (e.g., Wittig/HWE olefination, reductive amination after ester manipulation, or Knoevenagel condensations).
Selective deprotection: p-TsOH (1–10 mol%) in MeOH/H2O (typically 9:1) at rt–50 C affords the aldehyde; workup neutralizes acid to preserve the ester. Acetals are robust under base, permitting orthogonal chemistry.
Electrophilic activation: Lewis acids (e.g., BF3·OEt2) can activate the acetal to generate a benzylic oxocarbenium under certain conditions, enabling methoxymethyl transfer or exchange; however, strong acids risk over-hydrolysis to the aldehyde.
Cross-coupling after derivatization: The aryl core may be halogenated or converted to boronates from the aldehyde stage for Suzuki–Miyaura couplings, enabling late-stage diversification while the benzoate ester remains intact.
Multi-gram synthesis: The acetal often enhances stability and handling compared with the free aldehyde (less prone to polymerization/oxidation), aiding storage and transport.
Practical tips
Maintain neutral to basic conditions when the acetal must remain intact; strictly limit water and strong acid.
For hydrolysis, buffer strength and water content primarily control rate; ester survives modest acidic conditions but monitor to avoid transesterification in neat methanol.
Reaction Conditions
General literature guidance (not item specifications)
Acetal hydrolysis to aldehyde
Typical conditions: p-TsOH (1–10 mol%) in MeOH/H2O (9:1) or EtOH/H2O at rt–50 C, 0.5–6 h. Alternative: 0.5–1.0 M HCl(aq) in THF/H2O at 0–25 C. Monitor by TLC (hexanes/EtOAc) or LC.
Workup: Neutralize with NaHCO3 or triethylamine, extract with EtOAc, dry, and concentrate. Ester generally survives these conditions; avoid prolonged heating.
Stability windows
Stable under base (e.g., Na2CO3, K2CO3) in aprotic solvents; suitable for reactions such as SN2 on other handles, or for basic scavenging during workups.
Lewis acids can promote acetal exchange or cleavage; use only when intended. If Lewis acid activation is desired (e.g., oxocarbenium generation), employ low temperatures and short contact times.
Wittig/HWE olefination: THF or toluene, 0–25 C to reflux, 1–16 h; bases such as NaH or KHMDS for ylide generation (separate step), typical isolated yields 60–90% depending on substrate.
Knoevenagel condensation: Piperidine or ammonium acetate catalysis in ethanol or toluene, 25–110 C, water removal improves conversion; yields often 70–95% with active methylene partners.
Purification
Silica gel chromatography with hexanes/EtOAc or toluene/EtOAc. Avoid acid-treated silica to prevent on-column acetal loss.
Note: Optimize conditions for your scale and setup; run small pilots to confirm selectivity.
Safety and Handling
Item-specific hazard information (from Product Data)
Signal word: Not specified for this item; refer to SDS.
H-statements: Not specified for this item; refer to SDS.
GHS classification/pictograms: Not specified for this item; refer to SDS.
General safety guidance (literature/analogous compounds; defer to SDS)
Likely hazards: Aromatic esters and acetals are generally combustible organic liquids/solids; may cause skin/eye irritation. Acetals can hydrolyze in strong acid to release methanol; avoid acidic aqueous conditions that could generate methanol vapors.
PPE: Use lab coat, safety glasses/goggles, and appropriate chemical-resistant gloves (e.g., nitrile). Employ fume hood to minimize inhalation exposure during weighing, transfer, and workups.
Handling: Avoid contact with strong acids (risk of acetal cleavage) unless intentional. Keep away from ignition sources. Prevent moisture ingress when anhydrous conditions are required synthetically.
Incompatibilities: Strong acids (acetal hydrolysis), strong bases for prolonged times (ester saponification), strong oxidizers.
First aid (overview): Eye/skin contact—rinse with water for 15 minutes; remove contaminated clothing. Inhalation—move to fresh air. Ingestion—rinse mouth, do not induce vomiting. Seek medical attention in all cases.
Spill/cleanup: Absorb with inert material (vermiculite, sand), collect for disposal. Ventilate area; avoid breathing vapors/dust.
Fire-fighting: Use dry chemical, CO2, alcohol-resistant foam. Combustion may produce CO/CO2 and irritating fumes.
Always consult the product-specific SDS for authoritative hazard classifications and response procedures.
Solvent Selection
Applicability
As a neutral, moderately lipophilic aromatic ester bearing an acetal, this compound behaves as a typical nonpolar-to-midpolarity organic substrate. It is not itself used primarily as a solvent; selection here concerns media for its reactions, purifications, and handling.
General solvent compatibility (literature/experience)
Miscibility/solubility: Good solubility expected in dichloromethane, chloroform, toluene, THF, CPME, EtOAc, acetone, and alcohols; low solubility in water.
Polarity class: Nonpolar to midpolarity organic substrate (aromatic + oxygenated groups). Dielectric constant of common media should be chosen for reaction type (e.g., polar for ionic transformations, nonpolar for Friedel–Crafts-like chemistry).
Choosing media by task
Protection/deprotection: For intentional acetal hydrolysis, use protic, acidic media (MeOH/H2O with catalytic HCl or p-TsOH). For acetal stability, use neutral/basic, anhydrous solvents (toluene, DCM, EtOAc, CPME).
Carbon–carbon olefination on the liberated aldehyde (post-deprotection): THF, toluene, or DCM for Wittig/HWE; DMF/DMSO for Knoevenagel condensations.
Purification: Normal-phase silica with hexanes/EtOAc or toluene/EtOAc systems typically give good resolution; avoid strong acid-modified silica to prevent on-column acetal cleavage.
Quick comparison (literature guidance)
DCM vs 2-MeTHF/CPME: DCM offers fast kinetics in many Lewis-acid-mediated steps but is less green; 2-MeTHF/CPME provide better sustainability and sometimes improved selectivity while maintaining acetal stability.
Storage and Reconstitution
Item-specific instructions (from Product Data)
Storage conditions: Room temperature.
Shipping: Normal.
Practical storage guidance (general for acetals/aryl esters)
Store tightly closed in a dry, inert atmosphere if possible (e.g., with desiccant). Avoid prolonged exposure to moisture and strong acids, which can hydrolyze the dimethoxymethyl acetal to the aldehyde.
Protect from strong light/heat. For long-term storage, an amber bottle in a desiccator or dry cabinet is advisable.
If solidification occurs or if crystallinity changes, gently warm to ambient and mix thoroughly before use; verify integrity by 1H NMR (signals for acetal methoxy groups are diagnostic).
Reconstitution/handling
No reconstitution is required. For use in reactions, dissolve in a compatible anhydrous organic solvent (e.g., DCM, toluene, THF, EtOAc) immediately prior to use when moisture sensitivity matters.
Quality check on receipt/use
If your application depends on acetal integrity, confirm identity and purity by NMR/LC–MS. Any unexpected formyl signals may indicate partial hydrolysis during storage/transport.
Research Use Note: For research use only.
Structure and Identity
Item-specific facts (from Product Data)
SKU: M170280
Product name: METHYL-4-(DIMETHOXYMETHYL)-BENZOATE
CAS: 42228-16-0
CID: 170620
InChIKey (as provided): 447481
Storage: Room temperature; Shipped: Normal
Literature/computed structural information (for reference; not item specifications)
Preferred IUPAC name (literature): Methyl 4-(dimethoxymethyl)benzoate
Molecular formula (calculated from name): C11H14O4
2D structure description: A benzene ring bearing two para-substituted groups: (a) a methyl benzoate ester [–C(=O)OCH3] and (b) a dimethoxymethyl acetal [–CH(–OCH3)2]. The dimethoxymethyl carbon is benzylic (sp3) and attached directly to the aromatic ring; the acetal has two methoxy substituents. No stereocenters (the benzylic acetal carbon is prochiral but not configurationally stable).
General structural features
Functional groups: Aromatic ring, aryl ester, acetal (dimethyl acetal of the corresponding p-formylbenzoate ester).
Ring systems: One benzene ring; no heteroaromatic rings.
Reactivity flags: The acetal is stable to base and many nucleophiles but hydrolyzes under acidic aqueous conditions to the corresponding aldehyde (methyl 4-formylbenzoate). The aryl ester is relatively inert to mild base; saponifiable under strong base.
Synthetic Utility
Functional-group strategy
Acetal (dimethoxymethyl) as an aldehyde protecting group orthogonal to bases and many nucleophiles; cleavable under mild acid to reveal the para-formyl functionality on the aromatic ring while the methyl benzoate ester remains intact.
Ester as a handle for downstream diversification: transesterification, reduction to alcohol (DIBAL-H for selective reduction to aldehyde/alcohol under controlled conditions), or hydrolysis to acid for coupling chemistry.
Retrosynthetic/value aspects
Serves as a bench-stable surrogate for methyl 4-formylbenzoate, reducing risks of over-oxidation/self-condensation during storage and handling.
Para disposition between the ester and acetal-derived aldehyde allows convergent functionalization and predictable electronics for electrophilic/nucleophilic aromatic substitutions after appropriate activation.
Named/typical transformations downstream of deprotection (literature)
Wittig/HWE: Convert aldehyde to styrenes or cinnamate derivatives.
Knoevenagel/Perkin-type condensations: Access electron-poor olefins and cyanoacrylates.
Reductive amination (after ester to acid/amide conversion): Build benzylamines/benzamides.
Maintain anhydrous, neutral/basic media to preserve the acetal during steps unrelated to aldehyde chemistry.
When deprotecting, titrate acid and monitor by TLC/GC to avoid overexposure that could provoke transesterification/saponification.
Target Specificity
Not applicable. This product is a small-molecule building block and is not an antibody, enzyme, or affinity reagent. No target, epitope, clone, isotype, or species reactivity data are associated with this item.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.