MS-PEG3-THP , CAS No.357204-84-3

CAS: 357204-84-3 Cat. No.: M1445510 Formula: C12H24O7S Peso molecolare: 312.38
Disponibile su ordine
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
1mg
M1445510-1mg
Su ordinazione · 8–12 settimane
Enter a quantity for the sizes you want to add.

Panoramica

MS-PEG3-THP is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.

Specifiche

Condizioni di conservazione di stoccaggio
Store at -20°C
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Nomi e identificatori
Peso molecolare
312.38

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No tested biological application protocols are provided for this item. As a synthetic reagent/linker, protocols are highly context-dependent on the target molecule and chemistry.

General procedural outlines (literature/general knowledge; not item-specific):

  • SN2 installation of a nucleophile onto a mesylate-terminated PEG3–THP linker: Dissolve substrate in dry ACN, add nucleophile (1.5–3.0 equiv) and K2CO3 (2–3 equiv), stir at 25–50°C under N2 until LC-MS indicates completion. Filter, concentrate, and purify by column chromatography with polar modifier.
  • THP deprotection: Treat with catalytic PPTS in MeOH/DCM at rt, monitor by TLC. Quench with NaHCO3, extract with EtOAc, dry, and concentrate. Purify quickly to minimize PEG tailing.

These are general guidance examples only. Develop and validate procedures appropriate to your specific substrate and scale.

Biological Roles

Item-specific biological roles/functions — Not applicable. This product is supplied for research use only, and no biological activity or endogenous role is provided in the Product Data.

General note (literature/general knowledge; not item-specific):

  • PEG-based linkers like PEG3 fragments are widely used in chemical biology as spacers to reduce steric occlusion and modulate hydrophilicity in probes, affinity labels, and conjugates. The THP group is a protecting group without intrinsic biological function; it is designed to be removed under controlled conditions. Any biological interactions would arise from the conjugated payloads rather than the linker itself.

Compliance reminder: Do not use for diagnostic or therapeutic applications. No clinical or in vivo claims are made or implied for this item.

Buffer Applications

Not typically applicable. MS-PEG3-THP is a synthetic linker/protecting-group reagent rather than a buffering agent. It does not form defined acid/base conjugate pairs for pH control.

Practical tip (general): If handling in aqueous systems is required post-conjugation, dissolve first in a water-miscible organic cosolvent (e.g., acetonitrile or DMSO) before dilution into buffered media. Choose neutral to slightly basic buffers (e.g., phosphate, HEPES) to avoid unintended THP deprotection by acids. These are general recommendations; optimize conditions for the specific conjugate.

Green Alternatives

This section provides general green-chemistry guidance for PEG3–THP linker use (literature/general knowledge; not item-specific):

  • Solvent substitution:

    • Replace DCM with EtOAc or cyclopentyl methyl ether (CPME) for extractions and reactions where feasible.
    • Prefer 2-methyltetrahydrofuran (2-MeTHF) or CPME over THF for base-mediated substitutions; both offer lower peroxide formation rates and improved safety profiles, and 2-MeTHF can be bio-based.
    • Use acetonitrile or ethanol in place of DMF/DMSO when solubility/reaction scope permit to ease workup and reduce persistence in waste streams.
  • Catalysis and reagents:

    • Employ catalytic acid (PPTS) for THP deprotection instead of stoichiometric mineral acids; neutral workup minimizes salt waste.
    • For azidations or SN2 substitutions, consider greener bases (K2CO3, Na2CO3) and phase-transfer catalysis to lower solvent and energy demands.
  • Process intensification:

    • Run concentrated reactions to cut solvent volumes; microwave or flow setups may reduce time and byproducts for SN2 steps on PEGylated substrates.
  • EHS trade-offs (balanced view):

    • DMSO/DMF provide superior solvation for PEG substrates but complicate solvent recovery; 2-MeTHF/EtOAc improve lifecycle metrics but may slightly reduce rates or solubility.

Comparison (general; not item-specific):

  • THF vs 2-MeTHF: Similar polarity; 2-MeTHF has higher boiling point and better hydrophobicity for phase separations.
  • DCM vs EtOAc: EtOAc is less toxic and more biodegradable, with slightly lower solvating power for highly polar PEG species.
Pharmaceutical Uses

No pharmacopeial/excipient status or formulation role is specified for this item; refer to CoA/Spec Sheet if applicable. For research use only.

General context (literature/general knowledge; not item-specific):

  • PEG linkers are frequently employed in medicinal chemistry to tune solubility, permeability, and target engagement by spacing pharmacophores. THP is a protecting group used during synthesis and is typically removed prior to final API or excipient formulation.
  • In preclinical research, PEG3 linkers can be incorporated into tool compounds, imaging agents, or payload-linker constructs. Any such uses require case-by-case assessment of residual protecting groups, impurity profiles, and stability.

Compliance reminder: This product is not intended for human or veterinary use, nor for use as an excipient in commercial formulations without further qualification.

Physical Properties

Item-specific properties — Not specified for this item; refer to CoA/Spec Sheet.

  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES / InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Melting point / boiling point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density / refractive index: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility profile: Not specified for this item; refer to CoA/Spec Sheet.

General characteristics for PEG3–THP linkers (literature/general knowledge; not item-specific):

  • Physical state: Often low-melting solids or viscous oils; hygroscopic tendency can be moderate due to ether oxygens.
  • Solubility: Typically soluble in polar aprotic organic solvents (e.g., DMSO, DMF, acetonitrile, THF, dichloromethane) and alcohols; limited solubility in nonpolar hydrocarbons; generally insoluble in water unless an ionizable group is present.
  • Stability: THP ethers are acid-labile; neutral to basic conditions usually preserve THP. Polyether chains resist mild bases and many nucleophiles but can be cleaved by strong acids.
  • Partitioning: PEG3 segments confer moderate polarity; logP is often low-to-moderate relative to purely aliphatic chains of similar length.

Please consult the specific lot CoA for definitive numerical specifications if needed for method validation or regulatory documentation.

Quality and Grades

Item-specific grade/purity — Not specified for this item; refer to CoA/Spec Sheet.

  • Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (literature/general knowledge; not item-specific):

  • For linker/intermediate reagents like PEG3–THP derivatives, typical grades include research grade (assay usually by 1H NMR/LC-MS), and when applicable, HPLC-purified grades for bioconjugation workflows where low UV-absorbing impurities and minimal residual solvents are critical.
  • What grade implies: HPLC grade often indicates low chromatographic baseline drift and minimal nonvolatile residues; “bioconjugation grade” may denote extensive characterization (LC-MS purity, water content by KF, residual solvent limits). Analytical-reagent (AR) grade focuses on defined impurity thresholds but may not ensure low UV background.
  • Documentation: For sensitive applications (e.g., medicinal chemistry SAR or surface functionalization), request the lot-specific CoA that includes assay, identity (NMR/HRMS), water content (Karl Fischer), and residual solvent. Avoid assuming specifications without the CoA.
  • Practical tip: If using in coupling chemistry, perform a quick QC (thin-layer chromatography and LC-MS) upon receipt to verify purity under your method, since PEGylated species can show broadened peaks and tailing on some stationary phases.
Reaction and Applications

Manufacturer applications — Not specified for this item; refer to CoA/Spec Sheet.

General applications for PEG3–THP linkers (literature/general knowledge; not item-specific):

  • Spacer/linker chemistry: PEG3 provides a hydrophilic, flexible spacer to reduce steric hindrance and improve solubility between conjugated motifs (e.g., small-molecule handles, affinity tags, or surface anchors).
  • Protecting-group strategy: The THP group masks a primary/secondary alcohol, enduring neutral to basic conditions and removable under mild acid (e.g., PPTS, dilute HCl in MeOH/DCM), enabling orthogonal multi-step syntheses.
  • Activated termini: If the “MS” denotes a mesylate, the linker serves as an electrophile for SN2 displacement by nucleophiles (azides, thiols, amines, alkoxides), facilitating installation of diverse handles (–N3, –SH, –NR2, –OR). Azidation followed by Staudinger or CuAAC elaboration is a common pathway.
  • Bioconjugation scaffolds: PEG3 bridges hydrophobic pharmacophores to polar headgroups, or connects reactive warheads to recognition elements in PROTAC-like constructs and imaging probes.
  • Surface/ polymer modification: The PEG segment mitigates nonspecific adsorption and can improve wettability when grafted onto materials; THP enables post-grafting unmasking of hydroxyls for further derivatization (carbonate, carbamate, or carbonate activation).

Practical tips:

  • SN2 on mesylates: favor polar aprotic solvents (DMF, DMSO, ACN), use excess nucleophile and added base (e.g., K2CO3) for alkoxides; maintain low temperature for sensitive nucleophiles to limit elimination.
  • THP deprotection: use catalytic PPTS or dilute TFA in anhydrous solvents; monitor by TLC/LC-MS to avoid overexposure leading to polyether cleavage.
Reaction Conditions

Item-specific optimized conditions — Not specified for this item; refer to CoA/Spec Sheet or internal method development notes.

General conditions for common transformations with PEG3–THP linkers (literature/general knowledge; not item-specific):

  • SN2 substitution on mesylates (if present):
    • Solvent: ACN, DMF, or DMSO.
    • Base: K2CO3 (alkoxides/phenoxides), NaN3 (for azidation), NaSMe/thiolates (for thioethers); add 10–20 mol% NaI to accelerate via in situ iodide formation.
    • Temperature/time: 20–60°C, 2–18 h; monitor by LC-MS. Elevated temperatures can increase elimination or cleavage risk.
  • THP deprotection to alcohol:
    • Reagents: PPTS (5–10 mol%) in MeOH, EtOH, or acetone; or 0.5–2% HCl or TFA in DCM/MeOH.
    • Temperature/time: 0–25°C, 0.5–4 h; quench with dilute base, then concentrate under reduced pressure.
  • Carbonate activation of the deprotected alcohol:
    • Reagents: p-NPC (p-nitrophenyl chloroformate) or CDI; solvent: DCM, THF, or ACN; base: pyridine/DIPEA.
    • Temperature/time: 0–25°C, 0.5–3 h; couple in situ with amine partners.
  • Workup/purification:
    • Avoid strongly acidic silica; use neutralized silica or add 0.5–1% Et3N to eluent if needed.
    • Reverse-phase prep HPLC with water–ACN (+0.1% formic acid or NH4HCO3) can be effective; ensure compatibility with acid/base labile groups.

These are generalized literature conditions; optimize for your substrate and verify stability of the THP and PEG motifs under chosen conditions.

Safety and Handling

Item-specific hazard classification — Not specified for this item; refer to SDS.

  • GHS classification, signal word, pictograms, and H-statements: Not specified for this item; refer to SDS.

General safety guidance for PEG-linked, THP-protected reagents (literature/general knowledge; not item-specific):

  • Potential hazards: Organic polyethers are typically of low acute toxicity but may cause skin/eye irritation. THP-protected species can release alcohols under acidic conditions; avoid strong acids unless intentional deprotection is desired. Some sulfonate-activated termini (if present) may be irritants and can react vigorously with nucleophiles.
  • PPE: Wear lab coat, safety glasses, and appropriate chemically resistant gloves (e.g., nitrile). Use in a fume hood to avoid inhalation of vapors or aerosols from organic solvents used for dissolution.
  • Handling: Avoid moisture and strong acids to preserve THP protection. If the material is hygroscopic, tightly cap immediately after use. Purge with dry inert gas if long-term anhydrous storage is desired.
  • Incompatibilities: Strong mineral acids (risk of THP deprotection), strong oxidizers, and strong nucleophiles if the molecule bears an activated leaving group. Avoid prolonged contact with Lewis acids.
  • First aid overview: If on skin/eyes, rinse with water for at least 15 minutes; remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth and seek medical advice. Always follow the SDS for authoritative instructions.
  • Waste: Collect organic solutions/solids in halogenated or non-halogenated organic waste as appropriate; neutralize acids used for deprotection before disposal per institutional SOPs.
Solvent Selection

Item-specific solubility data — Not specified for this item; refer to CoA/Spec Sheet.

General solvent guidance for PEG3–THP linkers (literature/general knowledge; not item-specific):

  • Polarity class: Moderately polar due to the tri-ethylene glycol chain; typically dissolves well in polar aprotic solvents (DMSO, DMF, DMAc, NMP, ACN) and oxygenated solvents (THF, dioxane, MeOH, EtOH). Solubility in DCM/EtOAc is often good; solubility in hexanes is limited.
  • Water miscibility: Without ionizable groups, water solubility is often low-to-moderate; cosolvents (ACN, MeCN/H2O, or DMSO) can aid dissolution for analytical injections or aqueous workups.
  • Chromatography considerations: PEGylated compounds can streak on silica; adding a small percentage of MeOH or i-PrOH to DCM/EtOAc mobile phase, or switching to reverse-phase (C18) systems, often improves elution and peak shape.
  • Drying: For strictly anhydrous reactions, pre-dry the solid under high vacuum over P2O5 or molecular sieves, and use rigorously dried solvents (e.g., ACN, THF, toluene) to avoid inadvertent THP deprotection or hydrolysis.
  • When to choose alternatives: If acid-sensitive steps are planned, consider acetonitrile, toluene, or dichloromethane with neutral additives instead of alcohols. For greener profiles, 2-MeTHF or CPME may substitute for THF/DCM where compatible (see Green Alternatives).

Comparison (general):

  • DMSO/DMF: maximal solubility; harder to remove.
  • ACN/EtOAc: good balance of solubility and volatility.
  • THF/2-MeTHF: good solubility; compatible with many base-mediated couplings.
Storage and Reconstitution

Storage conditions (item-specific from Product Data):

  • Store at −20°C.
  • Shipped in an ice chest with ice pads.

Additional handling guidance (general; not item-specific):

  • Protect from moisture and strong acids to preserve THP-protected functionality if present.
  • For long-term storage, keep tightly sealed under inert atmosphere (argon or nitrogen) and in the original container. Allow the container to equilibrate to room temperature before opening to minimize condensation.
  • If a solution is needed, prepare fresh solutions in dry, oxygen-free solvents (e.g., ACN, DCM, THF, DMF, or DMSO) immediately before use. For extended storage of stock solutions, prefer anhydrous, inhibitor-free solvents in sealed vials at −20°C; assess stability by LC-MS/NMR periodically.
  • Avoid repeated freeze–thaw cycles; aliquot solids or solutions upon first opening if multiple uses are anticipated.

Note: Appearance, concentration limits, and exact reconstitution solvents are Not specified for this item; refer to CoA/Spec Sheet. Always follow the SDS for stability and compatibility details. For research use only.

Structure and Identity

Item-specific identifiers provided: CAS 357204-84-3; SKU M1445510; Product Name MS-PEG3-THP. Other identifiers (SMILES, InChIKey, molecular formula, molecular weight) — Not specified for this item; refer to CoA/Spec Sheet.

General interpretation from name (literature/general knowledge; verify against CoA before use):

  • MS-PEG3-THP commonly denotes a molecule incorporating a short poly(ethylene glycol) spacer of three ethylene oxide units (PEG3) and a THP (tetrahydropyranyl) protecting group on a terminal hydroxyl. “MS” in linker nomenclature often refers to a reactive leaving group such as mesylate (methanesulfonate) or to a masked/sulfonyl functionality. The exact substitution pattern and termini for this catalog item are not specified here.
  • Structural features typical of PEG3–THP linkers: flexible aliphatic polyether chain (–CH2–CH2–O–)3, at least one secondary alcohol masked as a 2-tetrahydropyranyl ether (a six-membered cyclic acetal), and a complementary reactive or masked terminus enabling further functionalization.
  • 2D description (generic for PEG3–THP motifs): a linear tri-ethylene glycol chain connecting a terminal substituent X–O–(CH2CH2O)3–R, where R may be a THP-protected alcohol (–O–THP). No stereogenic centers are typically present in the PEG segment; the THP acetal ring contains one anomeric center but is usually a mixture of chair conformers.

Important: The above is a literature-based scaffold interpretation of the name only and may not reflect the exact structure of CAS 357204-84-3. Rely on the item’s CoA/SDS for definitive identity details.

Synthetic Utility

General synthetic utility for PEG3–THP linkers (literature/general knowledge; not item-specific):

  • Functional-group strategy: The THP ether masks an alcohol, enabling multi-step sequences under neutral/basic conditions. Subsequent mild acid treatment reveals the alcohol for downstream elaboration (carbonate, carbamate, ester formation; Mitsunobu or Williamson ether strategies).
  • Electrophile handle: If the “MS” terminus is a mesylate, it is a high-quality leaving group for SN2 with azides (forming PEG3–N3), halides (via halide exchange), alkoxides/phenoxides (ethers), thiolates (thioethers), or amines (under appropriate conditions), expanding the linker’s diversity.
  • Conjugation platform: Revealed hydroxyls can be activated as p-nitrophenyl carbonates or CDI-derived carbonates for coupling to amines (urethanes) or to carboxylates (via carbodiimide chemistry after oxidation to acid).
  • Retrosynthetic utility: PEG3–THP units introduce polarity and conformational flexibility to bridge fragments in fragment-based design and PROTAC-like constructs, improving solubility without excessively increasing molecular weight.
  • Purification tactics: Due to the PEG chain, reverse-phase chromatography or normal-phase with polar modifiers (MeOH in DCM/EtOAc) often affords better separations. Derivatization to increase UV chromophore content (e.g., p-nitrophenyl carbonate intermediate) aids analytical tracking.

Caveats:

  • Avoid strong acids or prolonged acidic silica exposure to preserve THP until planned deprotection.
  • For SN2 steps, minimize elimination by keeping temperatures moderate and using polar aprotic solvents; consider iodide catalysis (NaI, Finkelstein) when converting mesylates to more reactive iodides.
Target Specificity

Not applicable. This product is a small-molecule linker/reagent, not a biological targeting reagent or antibody. No antigen, epitope, species reactivity, clone, or isotype information applies.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.