MS-PEG8-THP , CAS No.M1445152

CAS: M1445152 Cat. No.: M1445152 Formula: C22H44O12S Peso molecolare: 532.64
Disponibile su ordine
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
1mg
M1445152-1mg
Su ordinazione · 8–12 settimane
Enter a quantity for the sizes you want to add.

Panoramica

MS-PEG8-THP is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.

Specifiche

Condizioni di conservazione di stoccaggio
Store at -20°C
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Nomi e identificatori
Peso molecolare
532.64

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

Not applicable. No validated bioassay protocols (e.g., WB, IHC, IF, FC) are associated with this small‑molecule reagent. For synthetic applications, refer to the Reaction Conditions and Synthetic Utility sections for general laboratory guidance.

Biological Roles

Item-specific biological data: Not specified for this item; refer to CoA/Spec Sheet.

General context (research/bioconjugation; not clinical):

  • PEG segments are widely used in research to increase aqueous compatibility of conjugates, reduce nonspecific adsorption, and modulate spacing between functional motifs. An 8‑unit PEG provides a flexible, hydrophilic spacer of intermediate length.
  • The mesylate group enables installation of biologically relevant functionalities (e.g., conversion to azide followed by CuAAC to couple to alkynes). The THP‑protected end allows staged assembly: maintain a latent alcohol during upstream chemistry, then reveal it under mild acidic conditions for final attachment (e.g., carbonate formation to link to amines or phenols).
  • PEG spacers can reduce aggregation of hydrophobic labels or scaffolds in biochemical assays and can improve probe accessibility to targets in surface or bead‑based capture formats.

Caveats:

  • Sulfonate esters can alkylate nucleophilic residues; avoid exposing proteins or live cells to unreacted mesylate reagents. Perform conjugations on prefunctionalized handles and purify thoroughly before biological testing.
  • This product is for research use only; no biological efficacy or safety is claimed or implied.
Buffer Applications

This product is a synthetic linker/reagent rather than a pH buffer component. It is not typically used to prepare buffering systems or to control pH.

Practical note: If aqueous work is required (e.g., for downstream purification after organic synthesis), employ compatible buffer systems for extraction or desalting, but do not expose the mesylate functionality to aqueous basic buffers to avoid hydrolysis. For THP deprotection, mildly acidic organic media are customary rather than aqueous buffers.

Green Alternatives

Greener choices focus on solvent and process, as the core functionality (mesylate/THP on PEG) is central to the chemistry.

Comparison of common vs greener media (general guidance):

  • Traditional: DMF, DMSO, NMP — excellent PEG solubility and SN2 rates but carry environmental, toxicity, and regulatory burdens.
  • Greener options:
    • Acetonitrile (MeCN): lower toxicity than DMF/NMP; good SN2 performance; verify PEG solubility.
    • 2‑MeTHF or CPME: bio‑derived/low peroxide‑forming alternatives to THF/Et2O; often compatible with inorganic bases and PTC; check solubility for PEG8 systems.
    • Propylene carbonate or Cyrene: high‑boiling dipolar aprotics from renewable sources; may replace DMF/DMSO in some SN2 reactions; removal can be more challenging.
    • Water/ethanol mixtures with phase‑transfer catalysis (e.g., TBAB) for certain substitutions; monitor for hydrolysis of mesylate.

Process intensification and waste reduction:

  • Employ catalytic phase‑transfer to operate at lower temperatures and in greener solvents.
  • Use stoichiometric control to limit excess nucleophile and salts; consider telescoping azidation → click without isolating intermediates.
  • Apply solvent recycling and vacuum‑assisted workups to minimize high‑boiling solvent use.

Tradeoffs:

  • Greener solvents may reduce solubility or rate; pilot small‑scale screens are recommended.
  • Water content control is critical; greener, hygroscopic solvents can accelerate side hydrolysis of mesylates.
Pharmaceutical Uses

Item-specific pharmacopeial status or excipient designation: Not specified for this item; refer to CoA/Spec Sheet.

General formulation/synthetic context (non-clinical, research/manufacturing development):

  • PEG linkers such as PEG8 derivatives are frequently used in the research phase of drug discovery to assemble bifunctional molecules, surface modifiers, or pro-moieties, improving solubility and tuning pharmacochemical properties of leads in vitro.
  • The THP‑protected alcohol provides a handle for late‑stage derivatization (e.g., carbonate/carbamate/ester formation), while the mesylate terminus allows efficient SN2 installation of diverse groups early in a synthetic sequence.
  • In process development labs, related PEG reagents may serve as spacers in ADC linker investigations, polymer–drug conjugates, or as hydrophilic tethers for affinity tags, strictly for research use.

Caveats:

  • No claims are made for therapeutic use, safety, or compliance with any pharmacopeia for this SKU. Any application toward human or veterinary products requires independent qualification and regulatory assessment.
Physical Properties

Item-specific data from Product Data: • Appearance: Not specified for this item; refer to CoA/Spec Sheet. • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet. • Melting/Boiling point, density, refractive index, water/peroxide/metal limits, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.

Literature/general expectations for PEG8 mesylate/THP linkers (non‑spec):

  • Physical state: PEG8-based linkers are often viscous oils or low-melting waxy solids due to the flexible ether backbone and moderate molecular mass; exact state depends on end groups and purity.
  • Polarity/solubility (qualitative): typically miscible with many polar aprotic solvents (DMF, DMSO, acetonitrile) and lower alcohols; limited solubility in nonpolar hydrocarbons; variable water miscibility depending on termini and overall hydrophilicity.
  • Hygroscopicity: PEG oligomers can be hygroscopic; exposure to ambient moisture can lead to water uptake and, for sulfonate esters, hydrolysis.
  • Volatility: low; vacuum drying is usually feasible at ambient or mild heat.

Practical notes (general):

  • Handle under dry conditions to prevent hydrolysis of the mesylate and premature THP deprotection.
  • For analytical characterization, 1H/13C NMR in CDCl3, CD3OD, or DMSO-d6 typically shows broad PEG multiplets (3.3–3.8 ppm) and diagnostic signals for THP and mesylate methyl (~3.0 ppm). Exact chemical shifts will vary by structure and solvent.
Quality and Grades

Item-specific quality from Product Data: • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.

Guidance on grades for PEG linkers and sulfonate esters (general):

  • Research grade: suitable for most synthetic applications. Impurity profiles may include residual solvents, oligomer distribution, and trace inorganic salts.
  • High-purity/synthetic grade (if offered): tighter specifications on purity, water content, and residual metals; advantageous for moisture‑sensitive couplings and for analytical reproducibility.
  • HPLC grade (solvents) or LC/MS suitability (for analytes) is sometimes relevant for characterization; for reagents, low UV absorbance and low nonvolatile residue are beneficial when monitoring reactions by LC/UV.

Stabilizers/additives:

  • This item lists no stabilizer; if any stabilizers are used, they would be disclosed on the CoA/Spec Sheet. Absent such disclosure, do not assume presence of acid scavengers or inhibitors.

What to look for in the CoA/Spec Sheet:

  • Assay/purity method (NMR integration, HPLC/ELSD, GC, or qNMR), water content (Karl Fischer), identity (NMR/HRMS), and residual solvent profile.
  • For PEG oligomers, a narrow oligomer distribution (n) around 8 repeat units improves batch-to-batch performance; polydispersity may be reported by MALDI‑TOF or GPC.

Recommendation: For moisture‑sensitive SN2 or subsequent deprotection/derivatization steps, request the latest CoA to confirm water content and purity.

Reaction and Applications

Manufacturer Applications: Not specified in Product Data.

General/literature applications of MS‑PEGn‑THP‑type linkers:

  • Nucleophilic substitution at the mesylate terminus (SN2): introduces diverse nucleophiles (azide for subsequent Staudinger or click chemistry; halide; thiolate to give thioethers; alkoxide to extend chains; secondary amines to form PEG‑alkylated amines). Typical bases: NaN3, NaI (Finkelstein), KSAc/NaSH (then deprotect to thiol), RO–M. Solvents: MeCN, DMF, DMSO.
  • THP deprotection to reveal a terminal alcohol: catalytic acid (AcOH, PPTS, p‑TsOH) affords the free PEG‑OH for further activation (e.g., tosylation/mesylation, carbonate/ carbamate formation, CDI activation) or coupling (esterification, Mitsunobu as appropriate).
  • Spacer/linker in bioconjugation (research use): PEG8 provides ~3–4 nm contour length and hydrophilicity, improving solubility and reducing nonspecific interactions in conjugates.
  • Sequential orthogonal chemistry: first perform SN2 at the mesylate under basic/neutral conditions; then remove THP under mild acid to unmask an alcohol for a second coupling step.

Practical tips:

  • Keep systems dry; mesylates hydrolyze to alcohols, reducing yield. Use 3–5 Å molecular sieves or predry solvents.
  • Control temperature to minimize elimination or solvolysis; for sensitive nucleophiles, start at 0–25°C.
  • Monitor by LC/MS or 1H NMR; disappearance of mesylate methyl singlet and emergence of product‑specific resonances are informative.
  • For azidation, follow with CuAAC or Staudinger ligation as needed to join to amines or alkynes.
Reaction Conditions

The following are general literature conditions for MS‑PEGn‑THP‑type reagents; they are not item‑specific specifications.

SN2 displacement at mesylate terminus:

  • Nucleophile: NaN3 (1.2–2.0 equiv) in dry MeCN or DMF, 25–60°C, 2–16 h; typical conversions high; monitor by LC/MS. For faster rates, convert to iodide in situ with NaI (Finkelstein, 2–3 equiv).
  • Thiolation: KSAc or NaSH (1.2–1.5 equiv) in DMF, 0–40°C; follow with hydrolysis/deprotection to yield thiol.
  • Alkoxides: RO−M (1.2–1.5 equiv) in MeCN/THF with 18‑crown‑6 or PTC; keep temperatures ≤40°C to limit elimination.
  • Amines: Secondary amines in MeCN/DMF with base (DIPEA, K2CO3), 0–25°C initially; avoid overalkylation by using slight excess amine.

THP deprotection (unmask terminal alcohol):

  • Acetic acid (5–20% v/v) in MeOH/CH2Cl2 at 0–25°C, 0.5–4 h; or catalytic PPTS/p‑TsOH (1–10 mol%) in anhydrous MeOH, EtOH, or THF/H2O. Work under moisture‑controlled conditions to avoid concurrent mesylate hydrolysis if still present on intermediates.

Workup/purification:

  • Quench with bicarbonate to neutral pH after acidic deprotections; extract into suitable organic solvent; remove high‑boiling solvents under reduced pressure; use silica gel chromatography with polar modifiers (MeOH/DCM or EtOAc/hexanes with 0.1–1% NEt3) to manage PEG tailing.

Analytics:

  • LC/MS with ESI is effective for PEGylated species; NMR shows disappearance of THP acetal protons upon deprotection and loss of mesylate methyl singlet upon substitution.
Safety and Handling

GHS and item-specific hazard information from Product Data: • Signal Word: Not specified for this item; refer to SDS. • H-Statements: Not specified for this item; refer to SDS. • GHS Classification: Not specified for this item; refer to SDS. • Pictograms: Not specified for this item; refer to SDS.

General safety considerations for PEG-based mesylate/THP linkers (literature/guidance; not product-specific):

  • Mesylate functional groups are good leaving groups and can behave as alkylating agents toward nucleophiles; avoid skin/eye contact and inhalation of aerosols.
  • THP ethers are acid-labile; avoid strong acids unless intentional deprotection is desired. Hydrolysis can release alcohols.
  • Likely hazards: irritation to skin/eyes/respiratory tract; potential sensitization is possible for sulfonate esters.

PPE and engineering controls:

  • Wear lab coat, safety glasses or face shield, and appropriate chemically resistant gloves (nitrile commonly used). Handle in a fume hood to avoid inhalation exposure.

Incompatibilities and precautions:

  • Avoid strong acids (may deprotect THP) and strong bases/nucleophiles unless under controlled reaction conditions (may displace mesylate). Keep away from moisture; hydrolysis reduces activity.

First aid overview (refer to SDS for authoritative guidance):

  • Skin/eye contact: rinse with water for ≥15 minutes; remove contaminated clothing; seek medical attention if irritation persists.
  • Inhalation: move to fresh air; seek medical advice if symptoms occur.
  • Ingestion: rinse mouth; do not induce vomiting; seek medical attention.

Waste: Collect organic waste according to local regulations; segregate halogenated/non‑halogenated streams as applicable.

Solvent Selection

Applicability: As a PEG-based, bifunctional linker, MS‑PEG8‑THP is typically handled and reacted in polar aprotic media. No item‑specific solubilities are provided for this SKU; the following is general guidance.

General solvent considerations (literature/guidance):

  • Polar aprotic solvents (DMF, DMSO, acetonitrile, NMP): enhance SN2 displacement of mesylates by anionic nucleophiles (e.g., azide, thiolate, alkoxide). PEG chains dissolve well in these.
  • Alcohols (MeOH, EtOH, i‑PrOH): good for workup or for reactions where alkoxide formation is desired; may also promote competing solvolysis of the mesylate.
  • Ethers (THF, 2‑MeTHF, CPME): often suitable when using suspended inorganic bases (K2CO3, Cs2CO3) or phase‑transfer conditions; solubility of higher‑n PEGs can vary.
  • Water/co-solvent systems: PEG improves water miscibility, but mesylate hydrolysis risk increases; use buffered or anhydrous conditions when retention of the mesylate is required.

Selection tips:

  • For nucleophilic substitutions: dry MeCN or DMF with 1.1–2.0 equiv nucleophile/base, 20–60°C.
  • For THP deprotection: protic solvents with catalytic acid (AcOH, p‑TsOH) at 0–25°C; choose a solvent that solubilizes both the PEG linker and the substrate.

Small comparison (general):

  • MeCN: low viscosity, easy removal, good for SN2 — but lower PEG solubility vs DMF.
  • DMF/DMSO: excellent solubility for PEGs — but harder to remove; ensure thorough aqueous workup.
  • 2‑MeTHF/CPME: greener alternatives with good handling — check solubility and reaction rates.
Storage and Reconstitution

Item-specific storage/shipping from Product Data:

  • Storage Conditions: Store at −20°C.
  • Shipped In: Ice chest + Ice pads.

General handling and reconstitution guidance for PEG mesylate/THP linkers (not product‑specific):

  • Protect from moisture. Store tightly capped under inert atmosphere (argon or nitrogen) with desiccant. Allow container to warm to room temperature in a desiccator before opening to prevent condensation.
  • If solidifies at low temperature, gently warm to ambient to homogenize; do not exceed mild heat.
  • Prepare solutions in anhydrous solvents (e.g., dry MeCN, DMF, DCM, THF). Filter through PTFE syringe filters if particulates are present.
  • For long‑term storage of solutions, aliquot into dry, inerted vials and freeze at −20°C; minimize freeze–thaw cycles. Stability of mesylate in solution depends strongly on dryness and solvent; verify by test reactions or analytical checks before critical use.
  • Label aliquots with preparation date, solvent, and approximate concentration. Avoid acidic media during storage to preserve THP protection; avoid basic aqueous conditions to prevent mesylate hydrolysis.

Research Use Note: For research use only.

Structure and Identity

Item-specific identifiers from Product Data: • CAS: M1445152 • InChIKey: Not specified for this item; refer to CoA/Spec Sheet. • SMILES: Not specified for this item; refer to CoA/Spec Sheet. • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet. • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.

Interpretive description (general/literature, inferred from the name “MS-PEG8-THP”):

  • The designation typically denotes a heterobifunctional polyethylene glycol (PEG) linker with approximately eight ethylene glycol repeats (PEG8). One terminus is activated as a mesylate (MS, methanesulfonate) — a good leaving group for SN2 displacement — while the opposite terminus is masked as a tetrahydropyranyl (THP) ether, i.e., a protected alcohol.
  • Structural features (general):
    • Linear oligo(ethylene glycol) chain (–(CH2–CH2–O)8–), high conformational flexibility, hydrogen-bond accepting ether oxygens.
    • One end bearing an –O–SO2–CH3 group (mesylate) capable of nucleophilic substitution.
    • Opposite end as a THP ether (a 1,3-dioxane-like cyclic acetal) that can be deprotected under mild acid to reveal a terminal alcohol.
  • 2D description in words (general): a flexible PEG chain connects a sulfonate ester at one end to a cyclic acetal ether at the other, creating an electrophilic site for substitution and a latent hydroxyl for subsequent derivatization.

Note: Exact regiochemistry, counterions (if any), and precise repeat count should be confirmed on the CoA/Spec Sheet.

Synthetic Utility

Functional group logic (general for MS‑PEGn‑THP reagents):

  • Electrophile: Mesylate (–OSO2Me) is an excellent primary alkyl leaving group for SN2, enabling installation of N, O, S, X nucleophiles. It can also undergo displacement by azide (for modular CuAAC) or iodide (Finkelstein) to create more reactive intermediates.
  • Latent nucleophile: THP ether masks a terminal alcohol, stable to bases/nucleophiles used in SN2 but removable with mild acid to unmask HO–PEG8–.

Retrosynthetic value:

  • Disconnection across the mesylate allows late‑stage diversification: choose the nucleophile (R–X−, R–S−, R–O−, Nuc−) to tailor end‑group functionality while preserving a protected alcohol for subsequent coupling.
  • After THP deprotection, the primary alcohol can be activated (e.g., CDI → imidazolyl carbonate; p‑nitrophenyl carbonate; tosylation/mesylation) to form esters/carbamates/urethanes with amines or phenols.

Named/typical transformations (general):

  • Azidation → CuAAC “click” with terminal alkynes.
  • Finkelstein halide exchange (NaI in MeCN) to generate the iodide for faster SN2.
  • Williamson ether synthesis: alkoxide substitution on mesylate or, after deprotection, formation of ethers from the liberated alcohol.
  • Conversion to thioacetate (KSAc) then hydrolysis → thiol for thiol–maleimide couplings.

Workflow tips:

  • Sequence reactions to exploit orthogonality: SN2 first (basic/neutral), acidic THP removal second.
  • Protect sensitive nucleophiles; use anhydrous, oxygen‑free conditions where needed; monitor by LC/MS.
Target Specificity

Not applicable. This product is a small‑molecule linker/reagent and is not an antibody, protein, or probe with defined biological target specificity. No antigen, epitope, clone, isotype, or species reactivity applies.

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.