MUG Nutrient Agar Medium - BioReagent

Cat. No.: M1528700
Disponibile su ordine
QUALITÀ & PUREZZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
46.2g
M1528700-46.2g
Su ordinazione · 8–12 settimane
216,85€
Enter a quantity for the sizes you want to add.

Panoramica

Escherichia coli membrane filtration enumeration

Specifiche

Specifiche e purezza
BioReagent
Condizioni di conservazione di stoccaggio
Room temperature
Spedito in
Normal
Grado
BioReagent
Product Line
Prodotti biologici

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols
  • Item-specific protocols: Not specified for this item; follow the instructions on the product label and CoA/Spec Sheet.
  • General workflow for plate preparation and use (literature guidance; adjust per your SOPs):
    1. Preparation: Weigh the dehydrated medium as directed by the manufacturer into purified water. Heat with stirring until fully dissolved. If advised for your formulation, autoclave at 121 °C for ~15 minutes.
    2. Post-sterilization handling: Cool molten agar to ~45–50 °C. If using a heat-sensitive indicator component, add aseptically at this stage per the manufacturer’s instructions. Mix gently to avoid bubbles.
    3. Plate pouring: Dispense into sterile Petri dishes on a level surface. Allow to solidify. Dry plates as needed in a biosafety cabinet to remove surface moisture. Protect from light.
    4. Inoculation and incubation: Streak, spread, or overlay/membrane-filter as per method; incubate at the temperature and duration appropriate for the target organisms (commonly 30–37 °C in research contexts).
    5. Detection: Examine colonies under long-wave UV (~365 nm). Record presence/absence and intensity of blue fluorescence. Limit illumination time to reduce photobleaching.
    6. Quality controls: Include known positive/negative control strains each run. Document lot numbers and plate prep dates.
    7. Disposal: Autoclave used plates/media before discarding per biosafety regulations.
  • Notes: For research use only (from Product Data).
Biological Roles
  • Scope: This tab discusses biological context relevant to the fluorogenic indicator and target enzyme in this medium. It is not a clinical claim and not item-specific.
  • β-Glucuronidase (GUD) pathway (literature):
    • Many Enterobacteriaceae, including numerous E. coli strains, express GUD that cleaves β-D-glucuronides. MUG serves as a surrogate substrate; enzymatic hydrolysis releases 4-methylumbelliferone (4-MU), a fluorescent molecule.
    • The reaction: MUG + H2O —(GUD)→ 4-MU + D-glucuronic acid. The liberated 4-MU exhibits strong blue fluorescence, which intensifies under mildly alkaline conditions.
  • Microbial physiology notes (literature):
    • GUD expression can vary with strain, temperature, and growth phase. Some pathogenic E. coli lineages (e.g., O157:H7) may be GUD-negative, while certain non-E. coli organisms can be GUD-positive, underscoring the need for confirmatory testing.
    • Nutrient agar provides amino acids, peptides, vitamins, and minerals to support non-fastidious heterotrophs, with agar creating a semi-solid matrix suitable for colony isolation and enumeration.
  • Analytical considerations (literature):
    • Fluorescence readouts are influenced by pH, ionic strength, and medium background. Blue fluorescence of 4-MU is commonly measured with excitation ~360–370 nm and emission ~440–455 nm.
    • Photobleaching and quenching can occur; minimize ambient light exposure and consider brief UV illumination during observation.
Buffer Applications
  • Applicability: This product is a complex culture medium designed for microbial cultivation and fluorogenic detection; it is not intended or optimized for use as a buffering agent or analytical buffer system.
  • Guidance:
    • If your workflow requires defined buffering (e.g., for fluorescence quantitation of 4-MU in extracts), use standard laboratory buffers (e.g., phosphate, Tris) prepared at appropriate pH/ionic strength and validated for compatibility with fluorescence assays.
    • The inherent buffering capacity of complex media is variable and composition-dependent; item-specific buffer capacity or pH specifications are Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
  • Context: As a water-based microbiological medium, the principal environmental considerations are energy use (heating/autoclaving), plastic/agar waste, and management of biohazardous materials rather than solvent hazards.
  • Greener practice options (general literature guidance):
    • Energy optimization: consolidate autoclave loads, use validated minimum sterilization cycles, and pour only the number of plates required to reduce waste.
    • Waste reduction: adopt reusable glassware where feasible; segregate inoculated (biohazard) from uninoculated (non-biohazard) waste. Solidify and autoclave plates prior to disposal following institutional guidelines.
    • Indicator selection tradeoffs:
      • MUG (fluorogenic) vs chromogenic glucuronides (e.g., X-Gluc-type):
        • Pros of MUG: high sensitivity, simple UV visualization, minimal dye leaching.
        • Cons of MUG: requires UV illumination (worker exposure controls), fluorescence can be pH dependent; photobleaches with light.
      • Chromogenic alternatives: visible color readout without UV; may introduce colored effluents and can be less sensitive depending on formulation.
    • Procurement: source agar from responsibly harvested seaweed and consider suppliers with stated sustainability practices.
  • Item-specific alternative recommendations: Not specified for this item; no designated “green” substitute provided by the manufacturer.
Pharmaceutical Uses
  • Applicability: This product is not an excipient or active ingredient; it is intended for research microbiology workflows.
  • Potential roles in pharmaceutical R&D/QC settings (general, non-clinical):
    • Environmental monitoring method development, microbial enumeration studies, and research on indicator systems for presumptive identification of GUD-positive organisms.
    • Training and validation studies comparing fluorogenic versus chromogenic detection platforms for microbial screening.
  • Compliance note:
    • No pharmacopeial status or compendial equivalence is claimed here. Item-specific regulatory or compendial alignment is Not specified for this item; refer to CoA/Spec Sheet.
  • Research Use Only statement (from Product Data): For research use only.
Physical Properties
  • Item-specific facts (from Product Data):
    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • General/literature characteristics for this class of medium (not specifications):
    • Physical form: typically a free-flowing, beige to tan dehydrated powder before preparation; forms a firm gel when dissolved in water and solidified (agar ~1–2% w/v in typical media).
    • Solubility: components dissolve/disperse in water with heating; insoluble in organic solvents.
    • Gelation/melting (agar matrix, literature): gels on cooling below ~40–45 °C; melts above ~80–90 °C; exhibits thermal hysteresis.
    • pH: final medium pH is medium-dependent; Not specified for this item; refer to CoA/Spec Sheet.
    • Optical properties (MUG/4-MU fluorophore, literature): excitation ~365 nm (near-UV) and emission ~440–455 nm (blue fluorescence) after enzymatic cleavage to 4-MU; fluorescence increases with alkaline pH (>8) during measurement.
    • Sterilization (literature practice): moist heat at 121 °C for ~15 minutes is commonly used for agar media; components sensitive to heat are often filter-sterilized and added aseptically after cooling to ~45–50 °C.
    • Stability (general): protect from light to preserve fluorogenic substrates; avoid prolonged overheating to minimize sugar/coumarin degradation.
Quality and Grades
  • Item-specific facts (from Product Data):
    • Grade: BioReagent
  • Interpretation of grade (general):
    • BioReagent grade indicates suitability for biological and microbiological research applications, emphasizing consistent performance, low background interference for biological assays, and controlled bioburden/impurity levels suitable for research (not clinical) use. It does not imply pharmacopeial compliance unless explicitly stated.
    • For fluorogenic media, BioReagent grade supports reliable enzyme-indicator reactions (e.g., β-glucuronidase with MUG) by controlling impurities that could quench or enhance fluorescence or inhibit growth.
  • What is not specified for this item (consult CoA/Spec Sheet):
    • Exact formulation (g/L of peptones/extracts/NaCl/agar/MUG), pH of prepared medium, sterility testing parameters, fluorescence background, and performance criteria (e.g., recovery rates for target organisms). Not specified for this item; refer to CoA/Spec Sheet.
  • Practical quality notes (general):
    • Lot-to-lot consistency is important for growth and fluorescence readout; retain CoAs for each lot used in a study.
    • For fluorescence-based detection, low intrinsic background and good optical clarity of the gel are desirable; protect from light to maintain substrate integrity.
Reaction and Applications
  • Item-specific applications (from Product Data):
    • Manufacturer Applications: Not specified for this item in the catalog entry.
  • General/literature applications for MUG Nutrient Agar-type media (research use only):
    • Detection of β-glucuronidase-positive bacteria (classically many E. coli isolates) by fluorogenic readout: colonies exhibiting GUD activity hydrolyze MUG to release 4-methylumbelliferone, yielding blue fluorescence under long-wave UV (∼365 nm) in the agar or colony vicinity.
    • Enumeration studies, water/food/environmental microbiology research (e.g., membrane filtration or spread-plating) where a general nutrient base plus a GUD indicator facilitates presumptive identification while maintaining broad growth support for non-fastidious organisms.
    • Education and method development: side-by-side evaluation of indicator systems (e.g., MUG vs chromogenic glucuronides) and impacts of incubation conditions on enzyme expression.
  • Practical tips (literature):
    • Protect plates from light to preserve fluorophore sensitivity.
    • UV visualization is best in a dark room using appropriate eye/skin protection; verify excitation/emission settings if using a transilluminator or fluorescence imager.
    • Some E. coli serotypes (e.g., O157:H7) can be GUD-negative; conversely, certain non-E. coli may express GUD. Use confirmatory tests for taxonomic resolution.
    • Incubation temperature, medium composition, and oxygenation can modulate enzyme expression and fluorescence intensity.
Reaction Conditions
  • Item-specific conditions: Not specified for this item; refer to CoA/Spec Sheet and product label for exact preparation instructions.
  • General preparation and use conditions for MUG-supplemented agar (literature guidance; not a specification):
    • Dissolution: disperse dehydrated medium in purified water with stirring and heat until fully dissolved; avoid scorching. If the indicator is heat-labile in a given formulation, aseptically add it after autoclaving when the molten agar cools to ~45–50 °C.
    • Sterilization: autoclave at 121 °C for ~15 minutes; vent properly to avoid boil-over. Allow to cool to pouring temperature before plating.
    • Incubation: typical aerobic incubation for environmental/food isolates is 30–37 °C; actual temperatures and times depend on organism and method under study.
    • Detection: examine plates under long-wave UV (~365 nm) in a dark environment; record fluorescence promptly to minimize photobleaching. For quantitative measurement, extract with an appropriate buffer and measure fluorescence (Ex/Em ~365/445 nm) with pH control.
    • Controls: include known GUD-positive and GUD-negative strains as process controls to verify medium selectivity and indicator performance.
  • Environmental parameters:
    • Light: minimize exposure during preparation and storage to protect the fluorogenic substrate.
    • pH: maintain within the range recommended for the medium; excessive alkalinity/acidity can alter growth and fluorescence.
Safety and Handling
  • Item-specific hazard data (from Product Data):
    • Signal word / GHS classification / Pictograms / H-statements: Not specified for this item; refer to SDS.
  • General laboratory safety guidance (literature/practice; not a substitute for the SDS):
    • Use standard microbiological PPE: lab coat, safety glasses, and appropriate gloves. Handle powders in a way that minimizes dust generation; employ local exhaust if needed.
    • Avoid inhalation and contact with eyes/skin. Wash thoroughly after handling.
    • Microbiological risk: once inoculated, plates/broths contain live microorganisms. Treat all used media as biohazardous and autoclave before disposal, in compliance with institutional biosafety procedures.
    • Thermal hazards: molten agar is hot; handle flasks and plates with heat-resistant gloves and face protection to prevent burns. Avoid boiling over when heating.
    • Chemical incompatibilities (general): strong oxidizers and strong acids/bases may degrade organic components and fluorophore integrity; keep away from reactive chemicals and light to preserve MUG activity.
    • First aid (overview): in case of eye/skin contact with powder or molten medium, rinse with copious water; if inhaled, move to fresh air; if ingested, rinse mouth. Seek medical attention as needed. Refer to the SDS for authoritative instructions.
    • Fire safety: organic content is combustible; use water spray, foam, CO2, or dry chemical as appropriate. Thermal decomposition can produce irritating fumes; firefighters should wear SCBA.
Solvent Selection
  • Applicability: This product is a dehydrated culture medium intended to be prepared in water; organic solvent selection is not applicable.
  • Aqueous preparation considerations (general literature guidance):
    • Use high-purity water (e.g., ASTM Type I/II) to minimize inhibitory ions, organics, or particulates that could impact microbial growth or fluorescence background.
    • Adjust water quality to be low in residual chlorine/chloramine; pre-boiling or activated carbon may be used in facility water systems to remove oxidants that degrade coumarins.
    • Degassing water before autoclaving can reduce bubble formation in poured plates.
  • Comparison to alternatives (general):
    • Buffering: If your application demands tighter pH control during incubation or fluorescence measurement, consider preparing in a defined buffer (e.g., phosphate) only if compatible with the medium’s intended performance; otherwise, follow the product’s instructions. Excess buffering can alter enzyme activity and growth characteristics.
    • Light management: Prepare and store in opaque or amber containers to limit photodegradation of the MUG substrate.
  • Not specified for this item: any requirement for special solvents, co-solvents, or additives. Refer to the product’s CoA/Spec Sheet for definitive preparation guidance.
Storage and Reconstitution
  • Item-specific storage and shipping (from Product Data):
    • Storage Conditions: Room temperature
    • Shipped In: Normal
  • Reconstitution guidance (general literature; follow the product label/CoA for exact instructions):
    • Solvent: Use purified water for reconstitution.
    • Dissolution: Add the dehydrated medium gradually with stirring; heat to fully dissolve. Avoid localized overheating that can caramelize sugars or degrade indicator components.
    • Sterilization: Autoclave at 121 °C for ~15 minutes unless the product label specifies an alternative. If an indicator is heat-sensitive in your formulation, aseptically add it after cooling the sterilized base to ~45–50 °C.
    • Plate/broth storage: Protect prepared media from light. Store poured plates inverted in sealed sleeves or bags to limit desiccation. Typical laboratory practice stores plates at 2–8 °C and uses them within a few weeks; verify and align with your SOPs. Prepared broths are generally stored refrigerated and used promptly.
    • Freeze–thaw: Do not freeze prepared agar plates; freezing disrupts the gel matrix. If long-term storage of dehydrated medium is required, keep tightly closed in a cool, dry, light-protected place per label instructions.
  • Not specified for this item:
    • Exact shelf life, rehydration volumes, pH after reconstitution, and composition. Refer to the CoA/Spec Sheet.
Structure and Identity
  • Item-specific facts (from Product Data):
    • Product: MUG Nutrient Agar Medium (SKU: M1528700)
    • Grade: BioReagent
    • CAS/InChIKey/SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula / Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • General description (literature):
    • This product category denotes a complex, multi-component microbiological culture medium composed of a nutrient agar base supplemented with a fluorogenic substrate MUG (4-methylumbelliferyl-β-D-glucuronide). It is intended for the cultivation of non-fastidious bacteria and the fluorogenic indication of β-glucuronidase (GUD) activity, characteristically associated with many Escherichia coli strains.
    • Structural features (qualitative):
      • Nutrient agar: a heterogeneous mixture of peptones/tryptones, yeast/beef extract, NaCl, and agar (a sulfated galactan polysaccharide) serving as a gelling matrix.
      • MUG: a β-D-glucuronide of 4-methylumbelliferone; enzymatic hydrolysis liberates the phenolic fluorophore 4-methylumbelliferone (4-MU).
    • 2D structure in words (literature):
      • Agar: linear galactose-based polymer with alternating 3,6-anhydro-L-galactose and D-galactose units (agarose fraction) and variable agaropectin side groups.
      • MUG: a glucuronic acid-containing glycoside linked via a β-glycosidic bond to a coumarin ring (4-methylumbelliferone).
Synthetic Utility
  • Applicability: As a microbiological culture medium, this product is not used as a reagent in organic synthesis.
  • Related biochemical reaction context (literature, for conceptual clarity):
    • The key transformation associated with the indicator is an enzyme-catalyzed hydrolysis of a β-D-glucuronide (MUG) to release 4-methylumbelliferone. While not a synthetic method, this reaction underlies the analytical readout and can be modeled in vitro with purified β-glucuronidase for kinetic studies.
  • For chemical synthesis needs related to components (general):
    • Researchers interested in coumarin derivatives or glycosides would typically source neat reagents (e.g., 4-methylumbelliferone, protected glucuronides) rather than formulated media. Reaction planning for such targets would involve glycosylation chemistry and coumarin functionalization, which lies outside the scope of this product.
Target Specificity
  • Item-specific target data: Not specified for this item; no organism-specific performance or selectivity claims are provided in the Product Data.
  • General/literature context (not a claim for this item):
    • MUG-based media provide a fluorogenic readout of β-glucuronidase activity, commonly associated with many E. coli strains. However, some E. coli (e.g., certain O157:H7 isolates) may be GUD-negative, and some non-E. coli species can be GUD-positive. Therefore, fluorescence should be considered presumptive and followed by confirmatory identification.

Hai bisogno di aiuto per scegliere la qualità?

La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.

Visualizza la guida alle qualità BioReagent →

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.