This compound belongs to the class of organic compounds known as pyranochromenes. These are organic heterocyclic compounds containing a pyran ring fused to a chromene (1-benzopyran) moiety.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Proprietà chimiche e fisiche
Peso molecolare
436.500 g/mol
XLogP3
4.000
Hydrogen Bond Donor Count
3
Hydrogen Bond Acceptor Count
7
Rotatable Bond Count
1
Exact Mass
436.152 Da
Monoisotopic Mass
436.152 Da
Topological Polar Surface Area
105.000 Ų
Heavy Atom Count
32
Formal Charge
0
Complexity
843.000
Isotope Atom Count
0
Defined Atom Stereocenter Count
0
Undefined Atom Stereocenter Count
1
Defined Bond Stereocenter Count
0
Undefined Bond Stereocenter Count
0
The total count of all stereochemical bonds
0
Covalently-Bonded Unit Count
1
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
No manufacturer-validated protocols are provided for this item. The following general laboratory practices apply to small-molecule natural product standards (informational):
Stock preparation
Prepare 10–50 mM stocks in dry DMSO or MeOH. Vortex and, if needed, sonicate gently. Filter through 0.2 µm PTFE before quantitative use.
HPLC/UPLC assay (example framework)
Column: C18, 2.1 or 4.6 mm ID. Mobile phase: water (A) and MeCN or MeOH (B), 0–0.1% formic acid as needed. Gradient to 60–90% B over 10–20 min.
Detection: 254 nm and 340–360 nm; confirm identity by LC–MS (ESI−).
Stability check
Store aliquots and monitor by HPLC for new peaks over time under intended storage and in working solutions.
Adapt these frameworks to your instrumentation and regulatory requirements. For validated analytical methods, consult peer-reviewed literature on prenylated flavones or develop fit-for-purpose methods under your lab’s SOPs.
Biological Roles
Context (general literature)
Neocyclomorusin belongs to the prenylated flavones reported from Morus species (mulberry). In plants, prenylated flavonoids often serve as phytoalexins—defense metabolites induced by biotic stress—and can modulate interactions with herbivores and microbes.
The cyclized-prenyl (2,2-dimethylpyran) moiety increases lipophilicity and membrane affinity relative to non-prenylated flavones, which can influence cellular partitioning in model systems.
Chemical biology properties (research context only; no clinical claims)
Phenolic hydroxyls confer antioxidant and metal-chelating capability; radical-scavenging and redox-modulating behaviors are commonly studied for this class.
Conjugated flavone chromophore enables fluorescence/UV signatures useful as intrinsic probes in binding and partitioning studies.
Metabolism and biotransformation (general)
In mammalian in vitro systems, flavonoids are frequently subject to Phase II conjugation (glucuronidation, sulfation) and Phase I modifications (O-demethylation/oxidation) in microsomes or hepatocytes; prenylation can hinder or redirect these routes.
Experimental considerations
Use defined serum/protein conditions in cell-free assays to account for nonspecific binding to albumin/lipids due to high hydrophobicity.
Report solvent vehicle and final v/v% rigorously; phenolic aggregates can form at low aqueous solubility.
Note: The above are general literature-based observations for prenylated flavones and are not specific biological claims for this SKU.
Buffer Applications
Neocyclomorusin is a sparingly water-soluble small molecule and is not used as a buffering agent.
Practical guidance
If incorporation into aqueous buffers is required for assays, prepare a concentrated stock in DMSO or ethanol and dilute into buffer to a final organic content typically ≤1% v/v (optimize for your system). Consider cyclodextrin inclusion complexes or surfactants (e.g., 0.01–0.1% Tween 80) if compatible with the assay.
Adjust pH only for the biological system; neocyclomorusin does not act as a primary pH buffer in standard laboratory ranges.
Green Alternatives
Because neocyclomorusin is a solid natural product rather than a process solvent or reagent, “green alternatives” relate primarily to extraction, purification, and assay solvent choices.
Greener solvent choices for handling/analyzing prenylated flavones (general)
Replace chlorinated solvents with ethyl acetate or 2-MeTHF where feasible for workup and chromatography.
Favor ethanol or isopropanol over methanol when analytical sensitivity permits.
For stock solutions, dimethyl sulfoxide (DMSO) remains common; consider propylene carbonate or Cyrene (dihydrolevoglucosenone) as emerging greener solvents for certain applications (method development required).
Sourcing and purification
Prefer plant material sourced under sustainable practices or synthetic routes minimizing protecting group steps and hazardous oxidants.
Use reversed-phase chromatography with water/alcohol mobile phases buffered minimally to reduce salt waste.
Comparison highlights (informational)
MeOH vs EtOH: EtOH is biobased and less toxic; however, MeOH offers stronger elution and lower viscosity—tradeoffs depend on chromatographic requirements.
DCM vs EtOAc: EtOAc provides lower toxicity and is biodegradable, though it can be less selective for very nonpolar impurities.
These recommendations are general and not item specifications; validate solvent changes for recovery, purity, and analytical performance.
Pharmaceutical Uses
No excipient or pharmacopeial role is specified for this item.
Research/manufacturing context (general)
Can serve as a reference standard for quality control of botanical ingredients derived from Morus spp. via HPLC/UPLC or LC–MS methods.
Useful in formulation research studies assessing solubilization strategies for lipophilic polyphenols (e.g., cyclodextrins, lipid-based systems) in a preclinical laboratory setting.
Note: This product is for research use only and is not intended for human or veterinary use, clinical diagnostics, or as an active pharmaceutical ingredient.
Physical Properties
Item-specific properties
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general expectations for prenylated flavones (informational, not item specifications)
Physical state: typically yellow to orange crystalline solid or powder for related morusin-type flavones.
Melting point: often in the 170–230 °C range for closely related prenylated flavones (literature, compound-dependent).
Solubility: sparingly soluble in water; soluble in polar aprotic/organic solvents (DMSO, DMF) and moderately in alcohols (MeOH/EtOH) (literature).
LogP: prenylation increases lipophilicity; logP commonly in the 3–5 range for related flavones (literature, varies by substitution).
UV–Vis: strong absorption in 240–280 nm (benzoyl system) and 320–380 nm (cinnamoyl system) bands typical for flavones (literature); useful for HPLC-UV detection.
IR: bands near ~1650–1670 cm−1 (C=O of flavone), ~1600, 1500 cm−1 (aromatic C=C), and broad 3200–3600 cm−1 (phenolic O–H) (literature).
Note: Where exact numerical values are required for method development or regulation, consult the Certificate of Analysis (CoA) and SDS. Do not treat the above literature ranges as specifications for this SKU.
Quality and Grades
Item-specific quality information
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
How to interpret grades for small-molecule research standards (general guidance)
Research-grade natural products are typically characterized by NMR, HRMS, and HPLC/UPLC purity assessments. If “≥98%” or similar is reported on the CoA, it generally indicates area% by HPLC/UPLC at a specified wavelength.
Low-UV-absorbing solvent residues and defined water content are important if the material will be used as a quantitative reference standard; consult the CoA for residual solvent and moisture data, if available.
Stabilizers/additives
No stabilizer is specified for this item. If an antioxidant (e.g., BHT, ascorbate) is listed on the CoA, consider its impact on downstream assays and analytical baselines.
Batch-to-batch documentation
Request CoA/Spec Sheet for detailed analytical results (chromatograms, NMR data, melting behavior). Retain lot-specific documentation for method validation traceability.
Practical note
For bioassays or analytical standards work, prepare a fresh stock solution from a well-dried aliquot and record exact concentration by weight to minimize uncertainty.
Reaction and Applications
Research use note (from Product Data)
For research use only.
Typical applications (literature/general for neocyclomorusin-class flavonoids)
Analytical reference standard: calibration and retention-time marker in phytochemical profiling of Morus spp. extracts (HPLC/UPLC, LC–MS).
SAR and chemobiology: probe compound in structure–activity studies of prenylated flavones against enzymatic targets, oxidative stress pathways, and membrane interactions (non-clinical, mechanistic research only).
Materials/antioxidant chemistry: phenolic radical-scavenging benchmarks and evaluations of autoxidation kinetics in model systems.
Derivatization chemistry
Phenolic O-acylation/alkylation to modulate lipophilicity and stability (e.g., methylation with MeI/Ag2O or dimethyl sulfate; acylation with acyl chlorides/DMAP) (literature).
Protection strategies: silylation (TBDMS/TBS-Cl, imidazole) for selective transformations at other sites.
Oxidative transformations: DDQ- or IBX-mediated oxidation for exploring quinone/quinone-methide formation, with caution due to over-oxidation.
Isolation/enrichment workflows (general)
Solid-phase extraction (C18) followed by preparative reversed-phase HPLC exploiting the strong UV profile and hydrophobicity of the prenylated scaffold.
Note: No manufacturer-specific application list was provided; the above are typical research uses for this class and should be adapted and validated in each laboratory.
Reaction Conditions
General laboratory conditions for derivatizing prenylated flavones like neocyclomorusin (informational; not item specifications):
O-Methylation of phenols
Typical: MeI (1.5–3 equiv), K2CO3/acetone or DMF, 20–50 °C, 2–16 h. Alternative: Me2SO4 with base (use heightened safety precautions).
O-Acylation
Acyl chloride (1.2–2 equiv), pyridine or Et3N, catalytic DMAP, DCM or THF, 0–25 °C, 1–6 h. Steglich esterification: acid + DCC/EDC with DMAP in DCM.
Silyl protection
TBS-Cl (1.5–2 equiv), imidazole, DMF, 25–40 °C, 2–12 h; deprotect with TBAF (THF) at 0–25 °C.
Oxidations on flavone/allylic sites
DDQ (1.1–2 equiv) in toluene/MeCN, 0–25 °C for benzylic/allylic oxidation; monitor carefully to avoid over-oxidation.
IBX/DMP in DMSO/DCM for selective oxidations on phenolic derivatives.
Purification
Reversed-phase prep HPLC (C18) with water–MeCN or water–MeOH gradients, 0.05% formic acid if compatible. Normal-phase silica with hexanes/EtOAc for non-polar derivatives.
Analytical
HPLC-UV detection at ~254 and 340–360 nm (literature). LC–MS negative mode ([M–H]−) often provides sensitive detection for phenolics.
These conditions are typical for related compounds; optimize stoichiometry, temperature, and time for neocyclomorusin specifically via small-scale trials.
Safety and Handling
Item-specific hazard data
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General safety considerations for phenolic flavonoids (informational)
Likely low volatility solid. Avoid dust generation and inhalation of particulates.
Phenolic compounds can be irritants; prevent skin/eye contact.
Recommended PPE and controls
Wear lab coat, safety glasses, and appropriate chemical-resistant gloves (e.g., nitrile). Handle in a fume hood when weighing to minimize dust exposure.
Use antistatic and dust-minimizing techniques; employ local exhaust.
Storage incompatibilities and precautions (general)
Keep away from strong oxidizers and strong bases that can promote undesired O-alkylation/oxidation.
Protect from excessive heat and prolonged light exposure to limit oxidation or discoloration (general best practice for polyphenolics).
First-aid overview (general)
Skin: Wash with soap and water. Remove contaminated clothing.
Eyes: Rinse cautiously with water for several minutes; seek medical attention if irritation persists.
Inhalation: Move to fresh air; seek medical attention if symptoms occur.
Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
Always consult the official SDS for authoritative and current hazard, disposal, and transport information for this item.
Solvent Selection
Neocyclomorusin is a lipophilic, prenylated flavone with multiple phenolic hydroxyls. It is typically poorly soluble in water but dissolves in polar aprotic solvents and alcohols.
Practical solubility guidance (literature-based, not item specifications)
Highly recommended solvents: DMSO, DMF (excellent solubility for stock solutions, e.g., 10–50 mM), MeOH and EtOH (moderate to good solubility depending on temperature and water content).
Limited solubility: Acetonitrile (varies), ethyl acetate, acetone (moderate); solubility decreases with increasing water fraction.
Aqueous systems: Use cosolvent strategies (DMSO or EtOH 0.1–1% v/v) or cyclodextrin inclusion if biological assays demand aqueous media (method development required).
Polarity and detection
As a flavone, it exhibits strong UV absorbance near 254 nm and 340–360 nm bands (literature), facilitating HPLC-UV. LC–MS in ESI negative mode often shows deprotonated [M–H]− for phenolics.
Comparison (general)
Versus non-prenylated flavones (e.g., apigenin): prenylation increases lipophilicity, improving solubility in nonpolar/weakly polar organics but reducing aqueous solubility.
Handling tips
Warm gently (≤40 °C) and sonicate to aid dissolution in alcohols.
Filter stock solutions (PTFE syringe filter) prior to quantitative analyses to remove particulates.
Record exact solvent and water content for reproducibility in chromatographic and bioassay work.
Storage and Reconstitution
Item-specific storage
Storage Conditions: Room temperature (from Product Data).
Shipped In: Not specified for this item; refer to CoA/Spec Sheet.
General best practices (informational; not item specifications)
Protect from light and moisture to minimize oxidation/hydrolysis of phenolic compounds. Store in a tightly closed container; use a desiccator if humidity is high.
For long-term retention of analytical integrity, many labs keep natural product standards at 2–8 °C or −20 °C; validate against your stability data and CoA guidance.
Reconstitution
For analytical stocks, dissolve an accurately weighed amount in dry DMSO, DMF, MeOH, or EtOH to a known concentration (e.g., 10–50 mM). Record solvent, lot, and date.
Filter through a 0.2 µm PTFE membrane before use in quantitative assays.
Avoid repeated freeze–thaw of solutions by preparing single-use aliquots; store aliquots in amber vials to reduce photodegradation.
Always follow the SDS and CoA for lot-specific handling and storage instructions. The above general practices should be adapted based on your validated stability studies.
Structure and Identity
Neocyclomorusin is a prenylated flavone (natural product) belonging to the morusin family isolated from Morus spp. (mulberry). As a cyclized-prenyl flavonoid, it typically features a flavone core bearing phenolic hydroxyls and a fused 2,2-dimethylchromene (pyran) ring formed by intramolecular cyclization of a prenyl substituent.
Item-specific identifiers (from Product Data)
SKU: N994579
Product Name: Neocyclomorusin
CAS: 62596-35-4
PubChem CID: 5481973
InChIKey: 27151 (as provided)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general/literature-based description)
Flavone backbone (15-carbon C6–C3–C6 system) with a 4-oxo chromen-2-one core.
One or more phenolic –OH groups on the A/B rings (common for morusin-type flavones).
A cyclized prenyl (isoprenyl) group forming a fused 2,2-dimethylpyran ring on the aromatic system (hence “neo/cyclo”).
Conjugated aromatic system; no stereocenters expected in the planar flavone core; the fused pyran is typically achiral in the absence of additional substitution.
2D structure (verbal depiction; literature)
A benzopyran-4-one (flavone) scaffold fused to a second benzene ring, with a 2,2-dimethylpyran ring annulated across a catechol/phenolic subring; phenolic OHs positioned para/ortho depending on substitution pattern characteristic of neocyclomorusin.
Synthetic Utility
Although neocyclomorusin is typically an end-product natural product standard rather than a bulk building block, its functional groups afford selective derivatizations valuable for SAR and analytical method development.
Functional handles
Phenolic –OH groups: O-alkylation (MeI/Ag2O; Me2SO4), O-acylation (acyl chlorides/anhydrides with DMAP, or Steglich conditions), carbonate and carbamate formation.
Conjugated flavone core: Electrophilic substitution is deactivated; however, metal-catalyzed C–O or C–C functionalizations at activated positions have been reported for related flavones under Pd/Cu catalysis.
Prenyl-derived fused pyran: Under acidic conditions may undergo ring opening or rearrangement; oxidative modifications (e.g., singlet oxygen, DDQ) can generate quinonoid species.
Use cases
Probes/standards: Preparation of isotopically labeled analogs (e.g., 13C/2H) for quantitative LC–MS.
Conjugation: Installation of reporter tags (biotin/fluorophores) via carbonate/carbamate linkers from phenolic positions for affinity or imaging studies.
Retrosynthetic perspective (literature)
Late-stage annulation of the prenyl unit to a flavone precursor (e.g., Claisen–Schmidt followed by Algar–Flynn–Oyamada oxidation to flavonol, then cyclization of prenyl ether) is a common approach for cyclized-prenyl flavones.
Target Specificity
Not applicable. This product is a small-molecule natural product standard and not an antibody, enzyme, or oligonucleotide. No target specificity, epitope, or isotype information is available for this item.
Domande frequenti
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 62596-35-4. InChIKey BKIVBOLDWRIFMA-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.