Nutrient Agar - BioReagent

Cat. No.: N1528733
Disponibile su ordine
QUALITÀ & PUREZZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
500g
N1528733-500g
Su ordinazione · 8–12 settimane
373,04€
Enter a quantity for the sizes you want to add.

Panoramica

For use with blood or other enrichment agents, for the cultivation of fastidious bacteria (31 g/L).

Specifiche

Specifiche e purezza
BioReagent
Condizioni di conservazione di stoccaggio
Room temperature
Spedito in
Normal
Grado
BioReagent
Product Line
Prodotti biologici

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols

No manufacturer-validated protocols are provided in the Product Data for SKU N1528733. The following is general, literature-based guidance for preparing nutrient agar; adjust to your SOPs and the CoA/Spec Sheet for this item.

General preparation (literature; not item-specific)

  • Calculate required medium: Determine total volume; weigh dehydrated powder according to the manufacturer’s indicated grams per liter (value Not specified for this item; refer to CoA/Spec Sheet).
  • Disperse: Add powder slowly to purified water with vigorous stirring to prevent clumping. Swirl while heating gently.
  • Dissolve: Heat to near boiling until the medium appears uniformly dissolved.
  • Sterilize: Autoclave at 121 C for 15–20 min. After cycle completion, cool to ~50 C.
  • Pour plates: In a sterile environment, pour 15–25 mL per 90-mm Petri dish (volume per plate as required by your method). Allow to solidify; dry plates if a matte surface is needed for spreading.
  • Storage: Seal stacks in sleeves or bags; store inverted at 2–8 C. Use within a timeframe validated by your lab (e.g., 1–4 weeks), monitoring for contamination and dehydration.

Use in assays (examples)

  • Streak plate for isolation; incubate at organism-appropriate temperature (commonly 25–37 C depending on species and SOPs).
  • Spread/pour plate enumeration with appropriate dilutions and incubation conditions per method.

Always verify organism-specific conditions and any supplements required for fastidious strains.

Biological Roles

Scope

  • Nutrient Agar itself does not have a biological role as a single molecule; rather, it serves as a supportive matrix and nutrient source enabling the growth of many heterotrophic, nonfastidious microorganisms.

General/literature perspective on function

  • Nutrient supply: Peptones and extracts provide amino acids, peptides, vitamins, and trace elements necessary for anabolic metabolism, facilitating biomass accumulation and colony formation.
  • Matrix role: Agar creates a semi-solid hydrogel with minimal metabolizable content, enabling spatial separation of cells for clonal colony development while resisting most microbial enzymes (unlike gelatin), thereby maintaining plate integrity at 25–37 C.
  • Physiological observations: On a non-selective background, researchers can examine colony morphology, pigmentation, swarming, and other surface-associated phenotypes.
  • Ecosystem simulation: While simplified relative to natural environments, nutrient agar plates offer a reproducible, oxygen-accessible niche for aerobic/ facultative organisms, enabling isolation and enumeration from complex samples.

Limitations (literature)

  • Fastidious organisms (e.g., many pathogens, lactic acid bacteria) may require enriched/defined media with additional growth factors.
  • Selectivity: Lacks inhibitors/dyes; differential diagnostics typically require selective/differential media (e.g., MacConkey, mannitol salt agar).

For this item (SKU N1528733), organism coverage, exact composition, and target pH are Not specified for this item; refer to CoA/Spec Sheet. Users should verify growth performance for their specific strains and experimental goals.

Buffer Applications

Applicability

  • Nutrient Agar is not a dedicated buffering reagent or buffer system. It is a complex, non-selective microbiological medium. Any buffering capacity arises incidentally from its components (peptones/extracts) and is not standardized in the same way as defined buffers.

General notes (literature; not item-specific)

  • Prepared nutrient agar typically exhibits a near-neutral pH as formulated by the manufacturer, maintained reasonably during short-term culture. However, metabolic activity (acid/base production) by dense colonies can shift the local pH.
  • If tight pH control is required for experiments, use defined media supplemented with a known buffer system (e.g., phosphate, HEPES) or select a variant medium formulated with a specified buffer.

Practical guidance

  • Verify the pH of the prepared medium after sterilization and cooling; adjust only if permitted by your SOPs and with awareness that changes can affect growth.

Item-specific pH targets and buffering components are Not specified for this item; refer to CoA/Spec Sheet.

Green Alternatives

Context

  • Nutrient Agar is an aqueous, largely biogenic product (agar from red algae; peptones/extracts from biological sources). Environmental impact considerations revolve around sourcing, preparation energy (autoclaving), and waste handling rather than solvent toxicity.

Greener practice suggestions (general; not item-specific)

  • Source considerations: Prefer suppliers documenting sustainable harvesting of agarophytes and responsible sourcing of peptones/extracts (including plant-based peptones when suitable for your organisms).
  • Energy use: Optimize autoclave loading and cycles (validated fractional loads, combined sterilization of multiple media) to reduce energy consumption without compromising sterility assurance.
  • Waste minimization: Pour only the number of plates needed; consider smaller plate volumes where appropriate. Use reusable glassware for media preparation when compatible with your workflow.
  • Decontamination efficiency: Autoclave used plates/liquids in energy-efficient batches; confirm sterility with indicators to avoid repeat cycles.
  • Packaging: Consolidate orders or select larger pack sizes to reduce packaging waste when it aligns with your usage rate and shelf life.

Comparison table (literature, conceptual)

  • Standard Nutrient Agar vs plant-based/alternative peptone nutrient agars:
    • Composition sustainability: animal-derived peptones (variable); plant/microbial peptones (potentially more sustainable).
    • Performance: organism-dependent; verify with growth-promotion testing.
    • Ethical/Regulatory: plant-based options may align with certain institutional policies.

Item-specific environmental certifications or recycled content: Not specified for this item; refer to CoA/Spec Sheet.

Pharmaceutical Uses

Scope

  • No therapeutic claims. Nutrient Agar is for research use only (item-specific note). In pharmaceutical and biomanufacturing laboratories, general-purpose nutrient agar is commonly used in quality control microbiology, but specific regulatory claims require validated formulations and documented compliance.

General/literature roles in regulated environments (not item-specific)

  • Environmental monitoring plates (settle plates/contact plates) in non-sterile areas, where a non-selective medium is suitable for capturing total aerobic bioburden. Note: specialized media and formats are often specified by cGMP procedures.
  • Growth-promotion testing (GPT) control medium to verify performance of selective media and sterility tests.
  • Raw material and water testing for total aerobic microbial counts via spread/pour plate methodologies, according to compendial or internal methods.

Regulatory considerations

  • Use in GMP/GLP contexts requires media that meet compendial specifications (e.g., USP/EP/JP) and documented GPT with defined strains. This product’s compendial status is Not specified for this item; refer to CoA/Spec Sheet.
  • Certificates: For audits, retain CoA, lot traceability, and any irradiation/sterility documentation for pre-poured formats (if applicable). For this dehydrated format, sterility is achieved by user autoclaving.

Item-specific compliance, sterility, irradiation, and GPT results: Not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

Item-specific physical properties

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • pH (as prepared): Not specified for this item; refer to CoA/Spec Sheet.
  • Moisture/ash/clarity limits: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Intended to dissolve/disperse in purified water during preparation; exact parameters Not specified for this item; refer to CoA/Spec Sheet.
  • Other analytical cutoffs (UV, metals, etc.): Not specified for this item; refer to CoA/Spec Sheet.

General/literature properties for nutrient agar media (not item-specific)

  • Physical form (dehydrated): free-flowing powder or granules formulated to yield a clear to slightly opalescent gel upon autoclaving and cooling.
  • Gelation/transition: agar typically melts near 85–95 C and solidifies around 32–42 C (literature). Final gel strength depends on agar content and ionic composition.
  • Density: hydrated plates approximate water (~1 g/mL); dehydrated powder is lower and variable (literature).
  • Refractive index/logP/pKa: not applicable to a composite solid medium; values are not meaningful as single numbers.

Practical notes

  • Dissolution usually benefits from gradual addition of powder to cold/room-temperature water with vigorous stirring before heating to boiling; full clarification typically requires autoclaving. Avoid scorching during initial heating.
  • Final plate firmness and surface quality depend on agar percentage, cooling rate, and pouring temperature; condensation can be reduced by drying plates post-pour under sterile airflow.
Quality and Grades

Item-specific quality

  • Grade: BioReagent (item-specific). This indicates suitability for general laboratory research, including microbiological applications, with quality attributes controlled for reproducible performance in research workflows.

Interpretation of BioReagent grade (general guidance)

  • BioReagent typically denotes materials screened to meet internal specifications relevant to biological experiments (e.g., microbial growth performance, clarity, sterility assurance when properly autoclaved). It does not imply clinical/diagnostic grade or pharmacopeial compliance.
  • For complex media, quality is commonly assured by growth-promotion testing (GPT) against representative microbial strains, clarity/gel strength checks, and pH of the prepared medium. Exact acceptance criteria are manufacturer-specific.

What to check for this item

  • Composition statement, target pH, and recommended preparation are Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/preservatives: Not specified for this item; refer to CoA/Spec Sheet.
  • UV-absorbance background, trace metals, endotoxin, bioburden: Not specified for this item; refer to CoA/Spec Sheet.

Practical QC tips (user-side)

  • Verify pH of the prepared medium and observe plate appearance (color, clarity, gel firmness) after autoclaving and pouring a test batch.
  • Perform a small growth-promotion check with control strains relevant to your workflow to confirm lot performance before large-scale use.
  • Record lot numbers and retain a reference plate/slant as a control for longitudinal comparisons.
Reaction and Applications

Chemical reaction use is not the focus for this product. Instead, relevant applications are microbiological and bioprocess workflows. The following are general/literature applications for nutrient agar media (not item-specific):

  • Routine cultivation and maintenance of nonfastidious bacteria from environmental, food, water, and industrial samples; suitable for streaking, spreading, and replica plating.
  • Colony isolation and morphology assessment, including pigmentation, surface texture, and hemolysis-independent traits on a non-selective background.
  • Enumeration by spread or pour plate methods for total aerobic plate counts (APC) in quality control contexts (method references vary by industry/region). Always verify with your SOPs.
  • Baseline growth control plates in antimicrobial susceptibility workflows, where selective/differential media are tested alongside a non-selective reference.
  • Teaching and training laboratories for demonstrating aseptic technique, streaking for isolation, and contamination monitoring.
  • Short-term preservation: slants and stab cultures for storage/transport of many nonfastidious strains (long-term storage typically requires cryopreservation or lyophilization).

Practical tips (general)

  • Pre-warm plates to room temperature before use to reduce condensation and improve streaking quality.
  • Dry plates in a sterile hood to achieve a matte surface when needed for spreading assays.
  • For fastidious organisms, supplement with additional nutrients (e.g., blood, serum, yeast extract) or choose a richer medium (e.g., TSA, blood agar) according to organismal requirements.

Note: Specific validated applications for SKU N1528733 are not provided in the Product Data; consult the CoA/Spec Sheet for lot-specific performance data.

Reaction Conditions

Classical reaction-condition guidance does not apply to this product. Instead, the relevant “conditions” are those for medium preparation and sterilization.

General/literature preparation conditions (not item-specific)

  • Reconstitution: Disperse the specified mass of dehydrated medium in purified water with vigorous stirring. Heat to near boiling to ensure complete dissolution.
  • Sterilization: Autoclave at 121 C for 15–20 min (standard gravity displacement parameters) unless your SOP specifies otherwise. Avoid over-sterilization which can darken/alter nutrients.
  • Pouring: Cool to ~45–55 C before pouring plates to reduce condensation and prevent thermal shock to Petri dishes. Allow plates to solidify on a level surface; dry as needed in a sterile hood to achieve the desired surface.
  • Storage of prepared plates: Invert and store at 2–8 C in sealed sleeves or bags to minimize dehydration; bring to room temperature before use. Monitor for contamination and desiccation.

For SKU N1528733, exact powder-to-water ratio, target pH, and any special sterilization instructions are Not specified for this item; refer to CoA/Spec Sheet and your institutional SOPs.

Safety and Handling

Item-specific hazard information

  • Signal word: Not specified for this item; refer to SDS.
  • GHS classification and pictograms: Not specified for this item; refer to SDS.
  • H-statements: Not specified for this item; refer to SDS.

General safety guidance for dehydrated culture media (literature/practice; not item-specific)

  • Avoid inhalation of dusts; may cause mechanical irritation to respiratory tract and eyes. Use local exhaust or handle in a fume hood/biological safety cabinet when weighing/dispensing.
  • PPE: laboratory coat, safety glasses/goggles, and appropriate gloves (e.g., nitrile). Use heat-resistant gloves when handling hot media after boiling/autoclaving.
  • First aid (overview): If inhaled—move to fresh air; seek medical advice if symptoms persist. Eye contact—rinse cautiously with water for several minutes; remove contact lenses if present and easy to do. Skin contact—wash with soap and water. Ingestion—rinse mouth; seek medical advice.
  • Incompatibilities: Strong oxidizers and strong acids/bases may degrade organic components. Avoid contamination with microbial cultures prior to sterilization.
  • Autoclaving: Use properly vented caps, do not overfill flasks/bottles, and loosen closures to prevent pressure buildup. Allow media to cool before pouring plates to minimize condensation and burns.
  • Microbiological risk: Once inoculated, cultures and used plates are biohazardous. Dispose according to institutional biosafety protocols (e.g., autoclave at 121 C for ≥15–30 min before discarding). Always defer to the SDS and your institution’s EHS policies for authoritative guidance.

Research use only: For laboratory use; not for human or animal consumption or clinical applications.

Solvent Selection

Applicability

  • This product is a dehydrated solid medium designed to be reconstituted with purified water. Solvent selection in the classical sense (organic solvents/polarity classes) is not applicable.

General/literature guidance for preparation

  • Use high-purity water (e.g., ASTM Type 1 or 2) to minimize variability from ionic content and organics. Hard water can affect gel strength and clarity.
  • Do not use organic solvents; agar requires aqueous heating to dissolve properly, and organic co-solvents may inhibit microbial growth and alter gelation.
  • Typical workflow (literature): add the specified mass of powder to the appropriate volume of water, mix, heat to boiling to aid dissolution, and sterilize by autoclaving prior to use. Final pH is routinely adjusted by the manufacturer’s formulation and should be verified after sterilization and cooling.

Comparison notes (literature)

  • Nutrient Agar vs Tryptic Soy Agar (TSA): Nutrient Agar is a general-purpose medium supporting many nonfastidious organisms; TSA is often richer and may support a broader range of environmental and clinical isolates.
  • Nutrient Agar vs Minimal Media + agar (e.g., M9 + agar): Nutrient Agar is complex/undefined and promotes faster growth for many heterotrophs; minimal media provide defined conditions for physiological studies.

For this item, exact reconstitution ratio, pH target, and any supplements are Not specified for this item; refer to CoA/Spec Sheet.

Storage and Reconstitution

Item-specific storage and shipping

  • Storage conditions: Room temperature (as provided in Product Data). Protect from humidity; keep container tightly closed to prevent clumping and degradation.
  • Shipped in: Normal (ambient) conditions (item-specific).

Reconstitution and use (general literature guidance; not item-specific)

  • Water quality: Use purified water. Gradually disperse the powder with stirring; heat to aid dissolution.
  • Sterilization: Autoclave at 121 C for 15–20 min unless otherwise specified by your SOP/CoA. Avoid repeated autoclave cycles of the same batch.
  • Pouring: Cool to ~45–55 C before pouring plates or making slants. For antibiotic-containing plates, cool further (≤50 C) before adding sterile-filtered antibiotics to prevent inactivation.
  • Shelf life of prepared media: Store poured plates inverted at 2–8 C in sealed sleeves to minimize dehydration. Inspect regularly for contamination, drying, or surface defects. Define and adhere to an internal expiry based on stability studies.

Do not freeze the dehydrated powder. Avoid prolonged exposure to light and moisture. Exact reconstitution ratio (g/L), target pH, and any supplements are Not specified for this item; refer to CoA/Spec Sheet.

Research Use Only: For research use only; not for human or animal consumption, diagnostic, or therapeutic applications.

Structure and Identity

Item-specific identifiers: This product is a complex, undefined mixture (microbiological growth medium). A single molecular structure does not apply.

  • SKU: N1528733
  • Product name: Nutrient Agar
  • Grade: BioReagent (item-specific)
  • Molecular formula: Not applicable (complex mixture); Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not applicable (mixture); Not specified for this item; refer to CoA/Spec Sheet.
  • CAS, CID, InChIKey, SMILES: Not applicable to a composite medium; Not specified for this item; refer to CoA/Spec Sheet.

General composition (literature, typical for “nutrient agar” class; not item-specific):

  • Protein/peptone source (e.g., casein or meat peptone)
  • Beef/yeast extract (water-soluble vitamins, amino acids, carbohydrates)
  • Agar (polysaccharide gelling agent from red algae)

Structural features (descriptive, literature):

  • Heterogeneous mixture of low– to mid–molecular-weight peptides, amino acids, carbohydrates, and minerals dispersed in a high–molecular-weight agarose/agar gel matrix.
  • In 2D schematic terms, the solidified medium is an aqueous hydrogel network (agar) with solvated nutrient solutes imbibed within the pores. No single defined stereochemistry or ring system represents the product as a whole.

Identity notes:

  • Nutrient Agar is an “undefined/complex” medium; exact composition and lot-to-lot specs are controlled by the manufacturer’s internal QC but are not reducible to a single chemical entity. Always consult the product’s CoA/Specification Sheet for exact composition, pH targets, and any additives for the specific lot.
Synthetic Utility

Not typically applicable. Nutrient Agar is a complex biological medium, not a discrete reagent for chemical synthesis or a building block in organic/organometallic chemistry.

If relevant to your workflow (general guidance)

  • As a platform for microbial biocatalysis screening, nutrient agar plates can be used to select colonies expressing desired phenotypes (e.g., colorimetric reporters, halo formation on indicator-supplemented plates). However, such use relies on added substrates/indicators and organism genetics rather than intrinsic chemical reactivity of the medium.
  • For preparative chemistry or chromatography, choose defined chemical reagents and solvents; agar’s polysaccharide matrix is not used as a standard synthetic support in small-molecule synthesis.

No named reactions, functional group transformations, or retrosynthetic roles pertain to this product.

Target Specificity

Not applicable. This product is not an antibody, probe, or targeted reagent. Nutrient Agar is a non-selective culture medium and does not have target specificity in the sense of binding an antigen or receptor.

  • Antigen/epitope, clone, isotype, species reactivity: Not applicable.
  • Selective/differential agents: None by definition in standard nutrient agar; selectivity can be introduced only by user-added inhibitors/dyes (not part of this product unless specified—Not specified for this item; refer to CoA/Spec Sheet).

Hai bisogno di aiuto per scegliere la qualità?

La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.

Visualizza la guida alle qualità BioReagent →

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.