Plain Agar - BioReagent

Cat. No.: P1528422
Disponibile su ordine
QUALITÀ & PUREZZA BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Dimensione
Germania (EU)
USA*
Prezzo
Qtà
250g
P1528422-250g
Su ordinazione · 8–12 settimane
104,04€
Enter a quantity for the sizes you want to add.

Panoramica

Contains 0.1% potassium dihydrogen phosphate, for purification of pathogenic Aeromonas hydrophila, and may also be used for cultivation of other bacteria

Specifiche

Specifiche e purezza
BioReagent
Condizioni di conservazione di stoccaggio
Room temperature
Spedito in
Normal
Grado
BioReagent
Product Line
Prodotti biologici

Dati avanzati

Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Recensioni

Recensioni dei clienti

Application Protocols
  • Item-specific (Product Data)

    • Manufacturer protocols are not provided; the following are literature-based examples for laboratory use.
  • Example 1: LB agar plates (literature/general)

    • Components (per liter): LB broth base as specified by recipe; agar 15 g (1.5% w/v).
    • Procedure: Dissolve LB base and agar in water; adjust pH per recipe; heat to boiling with stirring until clear; autoclave at 121 °C, 15–20 min. Cool to 50–55 °C, add sterile antibiotic if required, mix gently, and pour 20–25 mL per 90 mm plate. Allow to solidify; dry plates briefly before storage at 2–8 °C (if your workflow requires cold storage) in sealed bags to minimize dehydration.
  • Example 2: Soft agar overlays for plaque/antibiotic diffusion assays (literature/general)

    • Components: Nutrient or tryptic soy broth with 0.5–0.7% (w/v) agar.
    • Procedure: Prepare and sterilize as above. Maintain molten overlays at 45–50 °C. Mix with inoculum as protocol dictates and overlay onto pre-solidified base agar plates.
  • Example 3: Plant tissue culture medium solidification (literature/general)

    • Components: MS basal salts with vitamins, sucrose (e.g., 20–30 g/L), agar 7–9 g/L (0.7–0.9% w/v).
    • Procedure: Dissolve components, adjust pH (commonly ~5.7), add agar, heat to dissolve, autoclave 121 °C for 15–20 min. Cool to ~50 °C and pour into sterile vessels.

Note: Optimize volumes, temperatures, and supplements per your organism/assay. Follow institutional sterile technique practices.

Biological Roles
  • Item-specific (Product Data)

    • Biological role claims specific to this item: Not specified; for research use only.
  • Literature/general context

    • Source biology: Agar is extracted from red algae cell walls where agarans provide structural integrity.
    • Microbial metabolism: Most bacteria and fungi cannot metabolize agar; select marine microbes encode agarases capable of hydrolyzing agarose into oligosaccharides.
    • Biocompatibility: Generally inert toward common laboratory microbes and cultured plant tissues; provides a physical scaffold without significant nutrient contribution.
    • Interactions: Charged substituents in agaropectin can weakly interact with proteins, dyes, or cationic species, potentially affecting diffusion in specialized assays.
    • Environmental aspect: Biodegradable under conditions supporting agarolytic organisms.

No clinical/therapeutic roles are implied; usage is restricted to laboratory research workflows.

Buffer Applications
  • Applicability statement

    • Agar is not a buffering agent and provides negligible intrinsic buffering capacity.
  • Practical, related uses (literature/general)

    • As a gelling component, agar is combined with buffered media (e.g., phosphate- or Tris-buffered microbiological media) to maintain pH during culture.
    • Typical approach: Adjust medium pH to target (commonly pH 6.8–7.4 for many bacterial media, or per specific recipe) before autoclaving with agar; fine adjustments, if needed, are made prior to pouring plates.

For buffer formulation details (pH ranges, buffer recipes), consult the buffer component’s documentation; agar primarily provides physical structure.

Green Alternatives
  • Sustainability profile (general)

    • Agar is renewable and bio-based, sourced from red macroalgae (Rhodophyta). Processing is aqueous and avoids halogenated solvents, aligning with green chemistry principles for materials sourcing.
  • Alternatives and trade-offs (literature/general)

    | Option | Renewable | Typical load (w/v) | Gel clarity | Notable pros | Notable cons | |---|---|---|---|---|---| | Agar | Yes | 1–2% | Moderate | Widely compatible, high melt point, inexpensive | Lot variability; charged impurities vs agarose | | Agarose | Yes | 0.5–1% | High | Low background, electrophoresis-grade options | Higher cost; narrower supply | | Gellan gum | Yes | 0.2–0.8% | High | Firm gels at low dose; cation-tunable | Sensitive to ion content; different mouthfeel/texture | | Carrageenan | Yes | 0.5–1.5% | Moderate | Strong gels with K+/Ca2+ | Ion-dependent; different rheology |

  • Greener practice tips

    • Optimize concentration to avoid overuse while maintaining required mechanical properties.
    • Reuse glassware/plates with appropriate sterilization where permitted by protocols.
    • Minimize energy by dissolving efficiently (e.g., controlled heating, avoid prolonged boiling) and batching autoclave cycles.
Pharmaceutical Uses
  • Item-specific (Product Data)

    • No pharmacopeial status or excipient-grade claims are provided for this item; refer to CoA/Spec Sheet. Labeled for research use only.
  • Literature/general manufacturing roles (non-clinical, no therapeutic claims)

    • Excipient functions: Suspending agent, thickener, and gelling agent in research formulations; can aid in preparing solid or semi-solid matrices for dosage-form prototypes during preformulation studies.
    • Compendial context: Agar is recognized in various pharmacopeias in excipient grades; however, suitability requires meeting specific monograph tests (e.g., identity, microbial limits, ash, sulfate). This product is not represented as meeting those unless explicitly stated in documentation.
    • Process considerations: Hydrate and dissolve with heat; filter or degas for clarity; sterilize by autoclaving when required. Ionic content and co-solvents may alter gel firmness and syneresis.

Any application in manufacturing or regulated work should verify compliance of the specific lot with relevant pharmacopeial specifications.

Physical Properties
  • Item-specific (Product Data)

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Storage conditions: Room temperature (as provided).
    • Other specifications (mp/bp, density, UV cutoff, metal limits, moisture): Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general properties (non-specific to this item)

    • Physical form: Off-white to beige granular or powdered solid (typical for plain agars; appearance varies by source and processing).
    • Solubility: Insoluble in cold water; hydrates and swells. Requires near-boiling water (~95–100 °C) to dissolve; forms clear to slightly opalescent gels upon cooling.
    • Gelation and melting (thermo-reversible):
      • Gelation temperature: ~32–43 °C (literature; depends on concentration and composition).
      • Melting temperature: ~85–95 °C (literature); significant hysteresis between gelation and melting.
    • Typical working concentrations: 0.5–2.5% (w/v) for microbiological plates; ≥3% for firmer gels or immobilization (literature guidance).
    • pH behavior: Essentially neutral; contributes minimal buffering capacity. Stable over pH ~4.5–8.5 in aqueous media (literature).
    • Ionic effects: Gel strength decreases with certain chaotropes; multivalent cations and high salts can modulate gel properties (literature).

Note: Values above are general literature characteristics of agar and are not item-specific specifications.

Quality and Grades
  • Item-specific (Product Data)

    • Grade: BioReagent. No further item-specific metrics (e.g., gel strength, ash, sulfate, clarity) are provided in the Product Data; refer to CoA/Spec Sheet.
  • What BioReagent grade generally implies (literature/general)

    • Intended for laboratory/biological research workflows (e.g., microbiological media, plant tissue culture) where consistent gelation and low bioburden are important.
    • Typically manufactured with attention to background contaminants that could interfere with biological systems (e.g., low microbial contamination, controlled heavy metals, and endotoxin), but exact limits vary by supplier and lot.
  • Selection considerations for agar (general guidance; not item-specific guarantees)

    • Gel strength (g/cm²), clarity, sulfate/ash content, and moisture are common QC parameters for agar products.
    • Application mapping:
      • Microbiology plating: Standard gel strength, good clarity.
      • Plant tissue culture: Low impurities and good optical clarity.
      • Specialized assays: Consistent gelling/melting behavior and minimal background nutrients.

For exact acceptance criteria of this item, consult the lot-specific CoA/Spec Sheet.

Reaction and Applications
  • Item-specific (Product Data)

    • Manufacturer applications: Not provided in the Product Data; see general applications below.
  • Literature/general applications (not item-specific)

    • Microbiological culture media: Primary gelling agent for plate, slant, and deep media across bacteriology, mycology, and environmental microbiology.
      • Typical use levels: 1.2–2.0% (w/v) for plates; 0.5–0.8% for motility/deeps; ≥1.5% for slants (literature guidance).
      • Advantages: High melting point and low nutrient background; most microbes do not metabolize agar.
    • Plant tissue culture: Solidifying MS or other basal media, enabling callus formation and shoot/root induction.
    • Immobilization matrix: Entrapment of whole cells, enzymes, or beads for biocatalysis, diffusion studies, and gradient formation.
    • Microbiological assays: Antibiotic diffusion (disk assays) and phage plaque assays (often using soft agar overlays at ~0.5–0.7% w/v).
    • Material science/templating: Sacrificial templating to create porous inorganic/organic materials.
  • Not typical uses

    • Electrophoresis of nucleic acids/proteins: Agarose (not plain agar) is preferred due to lower charged impurities and better-defined pore structures.
  • Practical notes

    • Degassing: Briefly cool and swirl or use vacuum to reduce bubbles before pouring plates.
    • pH control: Adjust medium pH before adding agar or prior to autoclaving; agar contributes minimal buffering.
Reaction Conditions

Because agar is a matrix rather than a reactive reagent, “reaction conditions” pertain to gel preparation and processing parameters.

  • General gel preparation (literature guidance)

    • Concentration: 0.5–2.0% (w/v) for microbiology plates; 0.3–0.7% for soft agar overlays; ≥1.5% for rigid slants.
    • Dissolution: Suspend in cold water or medium; heat to boiling with stirring until fully dissolved (solution becomes clear). Avoid scorching.
    • Sterilization: Autoclave 121 °C for 15–20 min at 15 psi; avoid prolonged cycles to minimize hydrolysis.
    • Pouring: Cool to ~50–55 °C before adding heat-labile supplements (e.g., antibiotics) and pouring plates to reduce condensation and thermal degradation.
  • Factors affecting performance

    • pH and salts: Extreme pH or high ionic strength can reduce gel strength.
    • Co-solvents: Alcohols and certain organics weaken gels; limit content or validate performance.
    • Reheating: Multiple melt–gel cycles may reduce strength due to depolymerization.

These are literature-based best practices; optimize for your specific assay and vessel geometry.

Safety and Handling
  • Item-specific (Product Data)

    • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to the product SDS.
    • Shipping: Shipped at ambient conditions (Normal), per Product Data.
    • Storage: Room temperature, dry (see Storage & Reconstitution tab for practical guidance).
  • General safety (literature/practice; not a substitute for SDS)

    • Expected hazards: Generally regarded as low acute toxicity. Primary concerns are dust inhalation, mechanical eye irritation, and potential combustible dust hazard when dispersed in air.
    • PPE: Laboratory coat, safety glasses, and appropriate gloves. Use dust control measures (avoid creating aerosols). Handle powders in a fume hood or with local exhaust if dusting is likely.
    • Incompatibilities: Strong oxidizers may degrade polysaccharides. Avoid contact with strong acids/bases at high temperature which can hydrolyze the polymer.
    • Thermal handling: Dissolution requires near-boiling water; use heat-resistant gloves and caution when autoclaving (pressure/steam burns risk). Allow media to cool to ~50–55 °C before handling/pouring.
    • First aid (overview):
      • Inhalation: Move to fresh air; seek medical attention if irritation persists.
      • Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek attention if irritation continues.
      • Skin contact: Wash with soap and water; molten media can cause thermal burns—cool affected area with water and seek medical care.
      • Ingestion: Rinse mouth with water; seek advice if symptoms occur.

Always consult the SDS for authoritative hazard, exposure limits, and emergency measures.

Solvent Selection

Agar is a water-processed gelling polymer; solvent selection focuses on aqueous media formulation rather than organic solvation.

  • Polarity and medium compatibility (literature/general)

    • Primary solvent: Water. Insoluble in cold water; dissolves upon heating to near-boiling; gels on cooling.
    • Buffer compatibility: Compatible with most common microbiological and biological buffers (e.g., phosphate, Tris) over mild pH. Minimal intrinsic buffering.
    • Additives: Salts, sugars, and peptones influence gel point and strength; high concentrations of chaotropes or solvents (e.g., ethanol, DMSO) can weaken gels.
  • When to choose agar vs alternatives (general comparison)

    • Agar vs agarose: Agar offers economical gelation for culture media; agarose provides higher purity/low-charge matrix for electrophoresis and sensitive assays.
    • Agar vs gellan gum: Gellan forms firmer, more transparent gels at lower loadings and is cation-responsive; agar offers classic microbiology performance and broad robustness.
    • Agar vs gelatin: Agar gels are plant-derived, thermo-reversible with higher melting points, and are less prone to proteolysis; gelatin is proteinaceous and melts near physiological temperatures.
  • Practical tips

    • Hydration: Pre-soak in cold water for several minutes to reduce clumping, then heat to dissolve.
    • Clarification: Gentle boiling and brief holding near 100 °C improve clarity; avoid prolonged overheating to minimize hydrolysis.
Storage and Reconstitution
  • Item-specific (Product Data)

    • Storage conditions: Room temperature (ambient), per Product Data.
    • Shipped: Normal ambient.
    • Additional item-specific details (shelf life, moisture limits, stabilizers): Not specified for this item; refer to CoA/Spec Sheet.
  • Practical guidance (literature/general)

    • Dry storage: Keep container tightly closed in a cool, dry place. Protect from humidity to prevent caking and microbial growth. Use desiccant if necessary.
    • Light/air: Routine laboratory light exposure is acceptable; avoid prolonged high-UV exposure which can induce degradation.
    • Reconstitution/dissolution: Sprinkle agar into cold water or medium with stirring to pre-wet; heat to >95 °C until fully dissolved and clear. For small volumes, microwave heating with intermittent swirling is effective; take care to avoid superheating.
    • Sterilization: Autoclave at 121 °C for 15–20 minutes. After sterilization, cool to 50–55 °C before adding heat-labile components and pouring.
    • Prepared media storage: Solid plates typically store inverted in sealed sleeves to reduce dehydration; shelf-life depends on formulation and storage conditions (not specified for this item). Monitor for contamination and desiccation.

Always consult the lot-specific CoA and SDS for authoritative handling and stability information.

Structure and Identity

Brief description: Plain agar is a heterogeneous, seaweed-derived polysaccharide blend used primarily as a gelling agent in microbiology and tissue culture.

  • Item-specific (Product Data)

    • Product name: Plain Agar (SKU: P1528422)
    • Grade: BioReagent
    • CAS/EC/UN identifiers: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES / InChI / InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general description (for background)

    • Composition: Predominantly agarose (a neutral, linear polymer of repeating agarobiose disaccharide units: β-D-galactose linked to 3,6-anhydro-α-L-galactose) mixed with agaropectin (sulfated, methylated, and pyruvylated galactans).
    • Structural features: Long, unbranched galactan chains capable of forming double helices upon cooling; helices aggregate into a 3D network that immobilizes water to form a thermo-reversible gel.
    • 2D structural motifs (verbal): Alternating galactopyranose rings connected via glycosidic linkages (commonly 1→3 and 1→4) with occasional sulfate and other substituents in agaropectin. No defined stereocenter pattern for the whole mixture due to heterogeneity.
    • Identity nature: Complex natural product mixture; a single definitive molecular formula or discrete structure is not applicable.
Synthetic Utility
  • Item-specific (Product Data)

    • No synthetic reagent role is specified.
  • Literature/general utility in synthesis and materials

    • Immobilization matrix: Entrap whole cells or enzymes within agar beads/slabs to enable heterogeneous biocatalysis and reuse; improves handling and separation.
    • Templating agent: Use agar gels as sacrificial scaffolds for preparing porous inorganic oxides, carbons, or polymer foams; burn-out or solvent exchange leaves controlled porosity.
    • Diffusion control: Establish concentration gradients for reaction–diffusion studies or crystallization screening within a stable hydrogel.
    • Green processing aid: Conduct aqueous-phase transformations in structured media to reduce solvent use and enhance mass-transfer control.
    • Microfabrication: Mold microchannels or castings in soft lithography-like setups where moderate thermal stability and mechanical integrity are needed.

These roles leverage agar’s thermo-reversible gelation, water compatibility, and inertness rather than chemical reactivity.

Target Specificity

Not applicable to this product type.

  • Item-specific (Product Data)
    • No antigen/epitope, clone, isotype, or species reactivity information is relevant to plain agar.

Agar is a gelling material, not an affinity reagent or biological targeting molecule.

Hai bisogno di aiuto per scegliere la qualità?

La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.

Visualizza la guida alle qualità BioReagent →

Desidera che le inviamo un messaggio quando avremo sconti disponibili?

Ricordamelo più tardi

Grazie! Controlli la sua casella di posta per confermare.

Ops! Le notifiche sono disabilitate.