QUALITÀ & PUREZZABioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.for Cell culture?Cell-culture grade — low endotoxin and contaminants to support viable cell growth. Use in mammalian/other cell culture media and supplements.Sterile?Sterile grade — processed and verified free of viable microorganisms. Use directly in aseptic procedures and cell culture without further sterilization.10mg/mL in water
Storage
Store at -20°C,Avoid repeated freezing and thawing
Protamine Sulfate is a basic protein sulfate extracted and purified from fresh mature sperm of fish. It is rich in arginine residues and carries a large number of strongly basic groups. This product binds electrostatically to heparin, an acidic mucopolysaccharide, forming a stable complex that neutralizes heparin's anticoagulant activity. It is suitable for research purposes such as anticoagulation neutralization of heparin-containing samples and removal of heparin activity.
Instructions for Use
1.Add this product to heparin-containing samples at an appropriate ratio according to experimental needs. Mix thoroughly and let stand at room temperature for several minutes.
2.For first-time use, determine the optimal amount through a preliminary experiment. Close the cap tightly immediately after use.
Precautions
1.This product is for research use only. It must not be used for clinical diagnosis or treatment, nor in food or pharmaceuticals.
2.For your safety and health, wear a lab coat and disposable gloves during operation.
3.Use the reagent as soon as possible after opening. Do not use if the solution appears turbid, discolored, or contains precipitate.
Specifiche
Specifiche e purezza
BioReagent, for Cell culture, Sterile, 10mg/mL in water
Stabilità e conservazione
Store at -20℃ long term (12 months). Avoid repeated freeze-thaw cycles.
Condizioni di conservazione di stoccaggio
Store at -20°C,Avoid repeated freezing and thawing
Spedito in
Ice chest + Ice pads
Questo prodotto richiede spedizione a catena fredda. I servizi di terra e altri servizi economici non sono disponibili.
Grado
BioReagent, per la coltura cellulare, Sterili
Product Line
Prodotti biologici
Dati avanzati
Certificati (CoA, COO, BSE/TSE e tabella di analisi)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calcolatori di soluzioni
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Recensioni
Recensioni dei clienti
Application Protocols
Manufacturer-validated protocols, tested applications, and recommended dilutions are Not specified for this item; refer to CoA/Spec Sheet and SDS. The following notes outline prudent planning considerations rather than validated procedures:
Planning tips (general):
Define the functional endpoint (e.g., extent of polyanion neutralization, particle size/zeta potential) and design a small matrix varying protamine dose, pH, and ionic strength.
Prepare fresh working dilutions in the target assay buffer. Filter-sterilize if sterility is essential (verify filter compatibility and potential peptide loss).
Monitor complexation by turbidity (A600–A700), gel retardation (for nucleic acids), zeta potential, or functional activity assays.
Include appropriate negative/positive controls (buffer only; known polycation standard) to benchmark performance.
Note: For any critical application, consult primary literature and establish internal SOPs. Do not substitute these notes for validated, product-specific instructions.
Biological Roles
Protamine proteins play established biological roles in chromatin biology and reproductive cell maturation (general literature information, not item-specific claims).
Physiological function (general):
In many vertebrates, protamines replace histones during spermatogenesis to achieve extreme chromatin condensation. Arginine-rich sequences provide dense positive charge, neutralizing DNA’s phosphate backbone and enabling tight packaging within sperm nuclei.
This compaction contributes to genome protection and hydrodynamic efficiency of sperm cells. Post-fertilization, protamines are replaced by maternal histones.
Molecular features:
High arginine content (guanidinium groups) and occasional serine/threonine residues subject to phosphorylation influence DNA binding and dynamics.
Lack of long acidic segments; net charge is strongly positive at physiological pH.
Biochemical implications in research:
The same electrostatic principles underlie laboratory uses: nucleic acid condensation, charge neutralization, and coacervate formation with sulfated glycosaminoglycans.
Sequence heterogeneity among species and preparations can modulate binding strength and kinetics; performance should be empirically calibrated.
Note: The product is for research use only. No clinical or diagnostic claims are made. The above describes native biological roles of protamine proteins as understood from the literature and provides conceptual context for their behavior in experimental systems.
Buffer Applications
This product is not a conventional buffering agent and is not typically used to maintain pH. Instead, it is a highly cationic peptide solution used to complex polyanions.
When buffer considerations matter (general):
Select a buffer that does not introduce competing anionic species (avoid strong anionic components or detergents) unless complexation is intended.
Commonly used research buffers include PBS, HEPES, or Tris at moderate ionic strengths; ionic strength and pH modulate electrostatic interactions.
Recipes and pKa data: Not applicable—protamine sulfate does not define a buffer system with a discrete pKa suitable for pH maintenance.
For workflows needing strict pH control, choose an appropriate buffering system separately (e.g., HEPES pH 7.4, Tris pH 7.5–8.0) and then titrate protamine within that matrix to achieve the desired level of complexation or precipitation.
Green Alternatives
Environmental and safety considerations for protamine sulfate largely relate to aqueous handling and peptide biodegradability.
Comparative perspective (general):
Protamine is a naturally derived, biodegradable polycation, often isolated from fish byproducts. As such, its environmental persistence is typically lower than that of synthetic cationic polymers like high-MW polyethyleneimine (PEI), which can be more cytotoxic and persistent.
Being supplied as an aqueous 1% solution eliminates the need for organic solvents during initial handling.
Trade-offs:
Natural-source variability can impact batch-to-batch performance, necessitating titration and additional QC.
Supply chain sustainability depends on fisheries byproducts and regional processing; certification and traceability vary by supplier.
Alternatives and their profiles (general comparison):
Poly-L-lysine (PLL): Biodegradable polypeptide; available in defined MW ranges; often more consistent than crude natural mixtures but can be costlier.
Chitosan: Biopolymer from chitin; cationic in acidic media; greener sourcing possible, but solubility and pH constraints differ.
PEI: Effective polycation; petroleum-derived, higher cytotoxicity, and less environmentally benign; strong performance in nucleic acid complexation.
Chitosan: Renewable, needs acidic pH for solubility; milder interactions.
PEI: Robust performance; higher toxicity and persistence.
Choose based on performance needs, biodegradability goals, and tolerance for batch variability.
Pharmaceutical Uses
For context only (general literature; not instructions for therapeutic use): protamine salts have historically been used as formulation excipients and complexing agents due to their strong cationic charge.
Excipient roles (general/literature):
Complexation with anionic biomolecules to modulate release profiles or stabilize macromolecular assemblies.
Charge-mediated interactions useful in depot formulations in combination with polyanions.
Manufacturing considerations:
Variability inherent to natural-source protamines can affect reproducibility; pharmaceutical uses typically require dedicated GMP sourcing, stringent impurity profiling, and validated potency/identity tests.
Endotoxin, bioburden, and residual solvent assessments are critical in regulated settings.
Important: This catalog item is BioReagent grade and labeled For research use only. It is not manufactured under GMP and is not intended for human or veterinary applications. Any discussion above is background information on excipient roles and does not imply suitability of this product for pharmaceutical manufacturing.
Physical Properties
Item-specific physicochemical specifications for this lot are limited.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Concentration: 1% solution (as named), typically interpreted as 1% w/v in water unless otherwise stated; exact basis and assay should be confirmed on the CoA.
pH: Not specified for this item; refer to CoA/Spec Sheet.
Osmolality/ionic strength: Not specified for this item; refer to CoA/Spec Sheet.
Density, refractive index, viscosity: Not specified for this item; refer to CoA/Spec Sheet.
Solubility (general/literature): Readily soluble in water and buffered saline; insoluble in most nonpolar organic solvents. High affinity for polyanions (e.g., heparin, nucleic acids) can lead to complex formation and apparent precipitation at charge-neutrality.
Charge properties (general/literature): Strongly basic and polycationic at neutral pH due to multiple guanidinium (arginine) sidechains. High isoelectric point (exact value mixture-dependent).
Stability (general): Aqueous solutions are stable when stored refrigerated and protected from microbial contamination; prolonged exposure to elevated temperature may promote hydrolysis/peptide degradation.
Important: Do not treat any values as item-specific specifications unless provided on the CoA/SDS. For experiment planning, verify pH, ionic strength, and exact concentration for your lot before use, especially for applications sensitive to charge stoichiometry (e.g., polyanion neutralization, complexation, or precipitation).
Quality and Grades
Grade/Purity for this item: BioReagent.
BioReagent-grade materials are suitable for common laboratory and life-science research workflows. They are prepared to meet typical expectations for consistency and performance in biochemical assays but are not manufactured under GMP and are not intended for human or veterinary use.
What BioReagent implies (general):
Emphasis on functional performance in research applications (e.g., polyanion neutralization, nucleic acid condensation, surface coating) rather than clinical specifications.
May include controls for bioburden/endotoxin and solution clarity as relevant to research use; exact acceptance criteria are lot- and supplier-defined.
Item-specific notes:
This listing is a 1% solution. Any stabilizers, salts, pH adjusters, or preservatives are Not specified for this item; refer to CoA/Spec Sheet.
UV absorbance background, metal content, and residual solvents: Not specified for this item; refer to CoA/Spec Sheet.
Documentation and verification:
For experiments sensitive to endotoxin or precise charge density, request Lot CoA and, if needed, additional QC data (e.g., endotoxin by LAL, peptide distribution by SDS-PAGE/LC-MS, pH, and conductivity).
If using in chromatography or analytical workflows, pre-screen UV background at relevant wavelengths to ensure compatibility with detection methods.
Reaction and Applications
While not used as a classical small-molecule reagent, protamine sulfate is widely employed in laboratory workflows that rely on strong electrostatic interactions between this polycation and polyanionic biomolecules.
Research application themes (general/literature):
Polyanion neutralization and precipitation: Forms stable complexes with nucleic acids (DNA/RNA) and sulfated polysaccharides (e.g., heparin), enabling precipitation, removal, or controlled neutralization in biochemical procedures.
Nucleic acid condensation: Facilitates compaction of plasmid DNA for physical delivery methods or for nanoparticle assembly; stoichiometry must be titrated to avoid overcharging.
Viral/vector workflows: Used to enhance adsorption of some viral particles to cell surfaces via charge bridging in research settings; optimization is matrix- and cell-line–dependent.
Surface conditioning: Provides temporary cationic coating to increase binding of anionic species onto supports (e.g., microspheres, membranes) or to modulate zeta potential.
Protein fractionation: At defined ionic strengths and pH, can precipitate select acidic proteins by coacervation.
Practical tips (general):
Prepare working dilutions in the same buffer as the target polyanion to minimize mixing artifacts. Add slowly with mixing; monitor turbidity or zeta potential to identify charge-neutrality endpoints.
Ionic strength and pH strongly modulate complexation; screen NaCl (0–300 mM) and pH 6.5–8.0 to tune selectivity and solubility.
For heparin quenching in research workflows, titrate by activity rather than mass where possible, as protamine composition varies by lot.
Note: The above are general literature practices; specific, validated uses for this catalog item are not provided by the manufacturer entry.
Reaction Conditions
Because protamine sulfate acts through electrostatic complexation rather than covalent chemistry, “reaction conditions” refer to parameters that control complex formation and stability. The following guidance is general literature practice and should be optimized per system; these are not product specifications.
pH: Near-neutral conditions (approximately 6.5–8.0) maintain strong cationic charge on protamine; more acidic pH increases charge yet may alter target stability. Exact pH choice is application-dependent.
Ionic strength: Low-to-moderate salt (0–150 mM NaCl) promotes complexation; higher ionic strength (>300 mM) can screen interactions and dissolve complexes.
Temperature: Ambient (20–25°C) for most operations; colder temperatures can slow kinetics and reduce aggregation; avoid elevated temperatures that could accelerate peptide hydrolysis.
Order of addition: Slowly add protamine solution to the polyanion under stirring to approach charge neutrality without overshooting, monitoring turbidity, zeta potential, or activity.
Stoichiometry: Optimize empirically. Reported working ranges in literature for nucleic acid condensation span low microgram-to-milligram protamine per milligram of DNA, depending on buffer and desired particle size/charge.
Incubation time: Minutes to tens of minutes are typical to reach equilibrium; longer times may allow restructuring/aging of complexes.
Workup: Complexes can be isolated by centrifugation or filtration; supernatants analyzed for residual polyanion.
Always verify with small-scale tests and adapt to your assay constraints.
Safety and Handling
GHS classification, signal word, pictograms, and H-statements: Not specified for this item; consult the product SDS for authoritative safety information.
General hazards (literature/practice):
May cause irritation to skin, eyes, and respiratory tract upon contact with solution or dried residues/aerosols.
Proteinaceous materials can be allergenic in sensitized individuals; avoid inhalation and skin exposure.
PPE and engineering controls:
Wear lab coat, nitrile gloves, and safety glasses. Handle solutions in a biosafety cabinet or fume hood if aerosolization or lyophilized handling is possible.
Use sterile technique to avoid contamination when sterility is critical to downstream biological assays.
Incompatibilities and precautions (general):
Strongly interacts with polyanions (e.g., heparin, DNA/RNA, acidic polysaccharides), causing complexation/precipitation—avoid unintended contact with such materials in shared workflows.
Avoid mixing with anionic surfactants or polyelectrolytes unless complex formation is intended; precipitation may foul columns/filters.
Do not autoclave the finished solution unless validated; heat can cause peptide degradation.
First-aid overview (general guidance; not a substitute for SDS):
Skin/eye contact: Rinse with water for ≥15 minutes; remove contaminated clothing. Seek medical attention if irritation persists.
Inhalation: Move to fresh air; seek medical attention if symptoms occur.
Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
Always defer to the current SDS for hazard classification, spill response, disposal practices, and transport information.
Solvent Selection
This product is supplied as an aqueous 1% solution; solvent selection is typically not applicable unless you plan to dilute, exchange, or formulate it differently.
Polarity and miscibility (general/literature):
Protamine sulfate is highly water-soluble due to its polycationic character. It is miscible with aqueous buffers (e.g., PBS, Tris, HEPES). It is generally insoluble in nonpolar and most aprotic organic solvents (e.g., hexanes, toluene, ether) and only sparingly compatible with high percentages of alcohols.
Buffer compatibility (general):
Compatible with neutral to slightly basic buffers; at acidic pH, remains cationic but may alter complexation behavior. High ionic strength can shield electrostatic interactions, reducing binding to polyanions.
Avoid anionic detergents/polymers (SDS, PSS) unless complex formation is intended.
Dialysis/Exchange:
If buffer exchange is needed, use dialysis or centrifugal ultrafiltration (e.g., 3–10 kDa MWCO, depending on peptide distribution; selection should be validated for your lot). Monitor conductivity and pH.
Alternatives (context):
For purely electrostatic surface conditioning, poly-L-lysine (PLL) or polyethyleneimine (PEI) are alternative polycations; each differs in molecular weight distribution, cytocompatibility, and persistence on surfaces.
Because the solution composition other than “1%” is not specified, verify salt content and pH before integrating into sensitive assays or coupling to organic media.
Storage and Reconstitution
Storage (item-specific):
Store at 2–8°C (per Product Data). Maintain container tightly closed to prevent evaporation and contamination.
Shipped on wet ice (per Product Data). Upon receipt, place immediately in a refrigerator (2–8°C).
Reconstitution:
Not applicable; supplied as a ready-to-use 1% solution. If concentration adjustment is needed, dilute with sterile, compatible buffer or water. Record final concentration and pH.
Handling practices (general):
Use sterile technique if sterility is required for downstream applications. Consider aliquoting into single-use portions to minimize contamination and repeated temperature cycling.
Avoid unnecessary freeze–thaw cycles; freezing aqueous peptide solutions can cause aggregation or precipitation depending on composition. If freezing is unavoidable, validate stability and thaw gently at 2–8°C.
Do not heat-sterilize unless validated; elevated temperatures can degrade peptides.
Stability and shelf life:
Specific shelf-life and stability data are Not specified for this item; refer to CoA/Spec Sheet and SDS. Inspect visually for turbidity, precipitation, or color change before use; discard if contamination or instability is suspected.
For long-term projects, confirm lot-specific concentration and pH, and document any buffer exchanges or dilutions performed after receipt.
Structure and Identity
Protamine sulfate is a polycationic peptide mixture combined with sulfate counterions, supplied here as a 1% aqueous solution for laboratory use.
Item-specific identifiers:
CAS: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not applicable for heterogeneous peptide mixtures; Not specified for this item.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Composition and structural features (general/literature):
Composed of short, arginine-rich basic proteins (protamines), typically isolated from fish sperm. Sequences are rich in arginine (–C(=NH)NH2 guanidinium sidechains), conferring high cationic charge at neutral pH.
Sulfate serves as the counterion to balance multiple positive charges on the peptide backbone and sidechains.
No defined single primary structure; rather, a distribution of peptide lengths and sequences (heterogeneous mixture). Lacks a defined tertiary structure in aqueous salt solutions; tends to adopt compact, highly charged conformations and can condense polyanions.
2D/functional-group description (general):
Peptide backbone of repeated amide linkages (–CO–NH–) with abundant guanidinium-bearing arginine residues and occasional other basic/neutral residues. Counterbalanced by sulfate anions (SO4^2–).
Note: Because this product is a defined 1% solution of a heterogeneous peptide mixture, small-molecule identifiers (single SMILES/InChI) and a single exact molecular formula are not applicable. Always consult the lot-specific CoA for sequence distribution and any additional characterization.
Synthetic Utility
Protamine sulfate is not a classical building block or stoichiometric reagent for small-molecule synthesis. Its primary value is in biomolecular and colloidal systems via electrostatic complexation.
When it can aid synthetic workflows (general):
As a phase modifier or flocculant to remove anionic contaminants (e.g., heparin, nucleic acids, acidic polysaccharides) from bioprocess streams.
As a transient cationic coating on supports to capture or orient anionic catalysts, enzymes, or ligands prior to covalent immobilization.
As a coacervate-forming agent to concentrate anionic reactants in aqueous media, potentially enhancing biocatalytic reaction rates.
Not typically applicable:
Does not participate in named organic reactions (e.g., cross-couplings, condensations) and is not used as a protecting group reagent or stoichiometric base/nucleophile.
For small-molecule synthesis needs, consider conventional reagents and solvents. Use protamine sulfate mainly where control of electrostatic interactions with polyanionic species is central to the task.
Target Specificity
Not applicable to this product type. Protamine sulfate is a polycationic peptide mixture and not an antibody, probe, or affinity reagent with defined antigen/epitope specificity.
Item-specific target data: Not specified for this item; refer to CoA/Spec Sheet if any affinity characterizations are provided.
For experimental planning, consider the general specificity of electrostatic interactions: protamine preferentially associates with polyanionic macromolecules (e.g., nucleic acids, sulfated glycosaminoglycans) under suitable buffer conditions.
Hai bisogno di aiuto per scegliere la qualità?
La nostra guida alla selezione delle qualità copre purezza, stato dello stabilizzatore e idoneità all'applicazione per tutte le varianti del nostro catalogo.
Utilizziamo i cookie per garantire il corretto funzionamento del sito web e, ove consentito, per migliorare la tua esperienza. Puoi gestire le tue preferenze in qualsiasi momento nelle Impostazioni. Per saperne di più, consulta la nostra Cookie Policy.
Desidera che le inviamo un messaggio quando avremo sconti disponibili?
Ricordamelo più tardi
Grazie! Controlli la sua casella di posta per confermare.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.